Places not working

My iphoto won't allow me to add a location to my photos

in the iPhoto preferences is look up places set to automatically
LN

Similar Messages

  • Places not working correctly

    I can't seem to get Places to work correctly. Here is what I do and what happens:
    1)  I shoot picts with a point and shoot and a handheld GPS. Dates and times are in synch. Time zone double-checked.
    2)  Import photos into Aperture.
    3)  Plug Garmin 60csx into Mac via USB. Choose track from today to import.
    4)  Nothing happens. Repeat #3 a total of three times. On the third time (I've done this several times and it is always on the third time) the track will appear in blue on the map. (Side note: moving the cursor along the track and looking at times--they seem correct. Double checking the time stamp on the images--they seem correct, too.)
    5)  I select the images and drag to the track line. Before I let go a little pop-up box comes up. It says "x hours" and below " -/+ y minutes". As I moved my mouse over the line the numbers of x and y change in irregular ways--or perhaps the fact that my track there and back is overlaid on top of itself is confusing me in some way.
    6)  I let go of the mouse. Dialog pops up asking if I want to assign photos based on time stamp. I click "Assign Location."
    7)  Pins then appear for each photo near where I had the cursor. Repeating this process, the pins always appear near the cursor, no matter where on the track I put the cursor, with the same images. The pins never appears at the correct location.
    Missing something obvious, no doubt!
    Thanks,
    --Darin

    Bug is fixed in Kepler https://bugs.eclipse.org/bugs/show_bug.cgi?id=393513

  • Edit-in-place NOT working...

    I've recently installed FCS at our small shop. I've read the Geller book, followed the Admin manual, and pretty much have gotten it to work.
    However, I can't get "edit in place" to work. It did work when I initially installed the system and tested it. And now, after a complete re-install, it doesn't work.
    I am using two local RAIDs. Each have a media directory that I set up as a device. For example:
    One device is called "Mojo Project Media 02"
    In the Device Pane (on the Admin / Client Java Interface) the Local Directory reads:
    "/Volumes/RAID_02/Mojo Project Media 02"
    So the Mac edit-in-place URI reads:
    "file://localhost/Volumes/RAID_02/Mojo Project Media 02"
    I can't get the edit in place URI to not ad "localhost" but I don't think this should matter.
    Whenever I try to move media into a Browser Window from FCS, it tells me I must copy it to my local cache first. This didn't happen when I first installed/configured the system.
    Can you not set up edit-in-place for a local directory (ie. a volume locally attached to the server with FCS installed)?
    I know it worked before. Is there something I am missing?

    Thanks A. Richards.
    After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
    So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
    We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
    We used another machine (server class) to install FCSr on.
    This would work right?

  • Places not working after photo has been edited...

    Hello All
    As the title states after I edit a photo in Iphoto (on the ipad, in either Photos or Adobe Express) the edited photo no longer shows in places.... Is this just the way it is? Does the geotag go away after editing? Should I be saving the edited photo differently? I know if I leave the original it will still show in places but I would prefer not to have both versions on my Ipad just the edited version, but I do like the Places tab/option....
    Any help would be greatly appreciated.
    Thanks :-)

    If you have the serial number for the installation and it is version 8 or higher you should be able to download it thru one of the pages linked below.  If you registered the software, you should be able to find the serial number information for it thru your Adobe account.
    If the above holds, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    Photoshop/Premiere Elements 8:
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    Photoshop/Premiere Elements 9:
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    Photoshop/Premiere Elements 10:
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Photoshop/Premiere Elements 11:
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

  • Logic 9 bounce in place not working as it should

    Trying to get the bounce in place to work on an external instrument track linked to a hardware synth.
    From the Logic 9 manual " The bounce process is usually performed offline, b*ut Logic Pro automatically switches to real-time bouncing whenever necessary. (When there is external gear involved, the External Instrument or I/O plug-in is used.)*"
    Not with me it's not.... the SPL whizzes through as if doing an offline bounce, without detecting its an external ins track and doing a real time bounce as it should...
    I've had this confirmed by a couple others so hoping this gets a fix and works how it should be as stated in the manual!
    Message was edited by: jauqq

    Hi, I've been experimenting further with regular bounce. Bouncing a kick drum from Battery results with an offset of 3 samples. Not a lot, I know, but it's not right. Bouncing Region In Place results in 205 samples offset, so something is broken somewhere.
    Any thoughts I 'd love to hear them!
    Cheers
    Steve

  • Facebook Check In/places not working?

    I have the latest 9320 3g bb, i don't have the BB Addon, and im using wifi, when i try to check in it just says aquiring location and my location is never found. In my options GPS services are all on and in my fb settings places is also on but it's still not working? do i need to edit a privacy setting on fb? if so how and which one
    here are all the screens you need:
    http://imgur.com/ABOky,MuG7t,7jxBS,COz9l,VK86w,K4661

    Hi ezeekaY ,
    Welcome to the BlackBerry Support Community.
    By the Add on, are you referring to a data plan from your wireless service provider? A data plan is required to connect your BlackBerry® Curve™ 9320 smartphone with the BlackBerry® Internet Service to use GPS services and Places for Facebook® for BlackBerry® smartphones. 
    Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Iphoto places not working

    In Iphoto I have many pictures with GPS location, but cannot see them under places. In preferences I have set up to look automatically and at info next to picture I can see a pin, but when I click places it tell me again choose event click info and assign place, once agian.

    Many reports. No solutions. One work around that has worked for some and not for others is to turn WiFi off and back on
    LN

  • Paste-in Place not working

    Hello,
    I have been having  some problems with past in place for a while.
    Sometimes this function works perfectly others when I copy (shift+command+c) and try to paste ex an icon into another artboard it simply pastes it in the same artboard, even thought I have the correct artboard selected.
    Sometimes it simply pastes in some random artboard.
    Do you think you can help out with this, would much appreciate it.
    Thanks,
    Ana

    shift+command+c? what do you have that set as? in my shortcuts that's Centre Text. copy is just command + c.
    I don't know if you're doing this or not without observing, but the artboard you have selected when you copy the object is relevant as well as the one selected when you paste.

  • "Recent Places" not working?!

    Hi,
    I have recently upgraded my operating system to OS X 10.4.10 and since than I don't see recently visited folders under "Recent Places" list in Adobe CS3 applications. The only thing I could see under "Recent Places" are the servers I visited but not the actual folders.
    These feature worked perfectly on previous operating system with Adobe CS2...
    Can anyone help?!
    Thanks,
    Goran
    G5   Mac OS X (10.4.10)  

    Hi Barry,
    Thank you.
    It is strange and I thought it has to be OS X issue because it doesn't work on other applications too, not only on Adobe CS3. For example I have the same problem in Quark too. But than there are other applications where "Recent places" works like for example Microsoft Word or TextEdit.
    I am using OS Dialog on Adobe CS3, the Dialog of Adobe CS3 doesn't even have this option?!
    Regards
    Goran

  • No Export options and Place not working correctly. InDesign CC 2014.

    I cannot place a file into a frame with cmd+d or File > Place.
    I get the preview on the cursor but won't place into a frame which I need to keep the frame effects and size options.
    - Also -
    I am not getting any options on Export - to change the output file type. Seems to be defaulting to PDF (print) in the dialogue box there is no dropdown.
    How do I fix this?
    I don't know how long this has been going on for as I don't use InDesign as much as other programmes but I am guessing since last update. I hate I am paying for this per month and have been sat on the phone and chat for over an hour waiting on a response. It is slowing my workflow down.
    I am fully updated.
    Creative Cloud Suite
    iMac Mid, 2011
    OS X Yosemite
    Version 10.10.2
    Processor: 3.1 GHz Intel Core i5
    Memory: 16GB 1333 MHz DDR3

    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences
    Note: If you're searching for the file as described in this article, you MUST MAKE YOUR HOME LIBRARY VISIBLE. It's hidden by default. In Yosemite or Mavericks, in the Finder, hold down the Option key to select Go > Library.

  • Places not working properly

    I am starting a new iPhoto library on a new iMac. I've never had this issue on my other Mac's but places takes forever to locate (I've used this a lot before with no problem). Just a spinning gear. The pin won't drop and where there is a pin, I cannot move it. It's also not showing accurate locations on photos taken with my iPhone (locations were fine when imported onto other mac).
    Any suggestions?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Toshiba 40RL958B: Toshiba Places not working

    *hi*
    *1st time Toshiba TV owner!*
    *i have purchased the above TV, and i'm trying to connect this TV via wireless router, i go through the process ( via menu and network selection) and it says connected, then i press to the Toshiba places button, it says connection not recognised, or words to that effect.*
    *when i go into quick menu, and network info, its showing as connected*
    *its also showing as recognised on my router, can anyone offer any ideas*
    *many thanks*
    Message was edited by: katdes

    Hi
    Did you solve this issue?
    Please check if you have the latest firmware installed.
    Furthermore use the factory reset option and configure the internet connection again.

  • Windows8 drag & drop Place not working

    I just upgrade to Windows8 x64 and I'm using Illustrator 64 CS6.   I am trying to drag and drop a TIF file off my desktop in to a document like I have so many times before in Illustrator but my cursor is showing the 'No' symbol (circle with line thru it).
    It is working in Photoshop tho.
    Is there something I am overlooking?

    I found the answer on the InDesgin forums.  I had Run As Administrator checked in the Illustrator shortcut Properties.  Unchecking it so it DOES NOT run as administrator fixed it.

  • Bounce in place not working as expected 9.0.2

    Hi,
    I'm trying to 'bounce in place' from Stylus RMX, but new audio is placed around 2000 samples late in the bounced audio file. There are no plug-ins inserted on the RMS channel strip. Any ideas where the problem may lie?
    My project starts at bar 0, which I've read can cause many issues, especially with automation. Is this true? Could this be the problem?
    Many thanks
    Steve

    Hi, I've been experimenting further with regular bounce. Bouncing a kick drum from Battery results with an offset of 3 samples. Not a lot, I know, but it's not right. Bouncing Region In Place results in 205 samples offset, so something is broken somewhere.
    Any thoughts I 'd love to hear them!
    Cheers
    Steve

  • View in place - not working

    Hi All,
    i have just noticed i can no longer view jpegs in place since the 10.6.7 update????
    previously everything worked fine now when I try to attach jpgs or pdf's all I get is the icon and I cannot select "View in place" because it is "greyed out" in the contextual menu????
    your help will be appreciated.
    richard

    ok well i just found a fix:
    http://discussions.info.apple.com/message.jspa?messageID=11339471#11339471
    what i did was:
    1. Quit Mail;
    2. Open ~/Library/Preferences/com.apple.mail.plist with Pref Setter.
    3. Go to the entry DisableInlineAttachmentViewing
    4. change boolean from true to false.
    5. Close and save the file.
    6. Open Mail.
    Sorted!!!

Maybe you are looking for