Planned cost & actual cost are same in process order.

hi,
I have created new order type for process order.
when i made process order & i  going for  confirmation in cor6n , on screen fixed & variable overheads values are coming which system had taken from receipe.
when i did changes in that values which are in hrs & confirm & settle the order, in cost analysis plan cost & Actual cost was seem to be same.
I dont get why this is happen ? is there any config in order type.
thanks in advance.
regard
sanjay.

Check in cost analysis, IN plan VS actual Is activity is available?
I feel U haven't maintain activity type in costing view of workcenter

Similar Messages

  • Not able to see the Cost analysis in the Process order (T-Code COR2).

    Hi SAP Guru's
    Csoting in the Process order Configuration.
    I have done the Config setting related to the Product Costing Controlling with regard to the
    Cost Sheet, Cost Componet Structure.Overheads, asssigning the Cost elements in the Costing sheet.
    assigned the same in the Process order.
    And also the Costing variant options seen in OPL1 t-code can not be displayed in the Process order Csoting Variant selection.
    where as the in the Costing variant for the cost component structure, i can see  the Xompany code with required plant details.
    looking  the costing alanysis data in Process order, unable to see

    Hi,
    If you are looking at cost analysis.  You will get this only some you do confirmations to the production or process Order.
    I hope you did confirmation of material and quantities to the Process Order
    Best Regards
    Surya

  • Cost Booked agaist a Process Order

    Hi Experts,
    For reporting purpose I have to pull Cost Booked agaist a Process Order ( Material cost+ Activity Cost+ Overhead etc etc.
    Which Table and Field I need to look for Or Reference in my Report?
    Thanks in advance

    YOu can see the cost Incurred for thr production order in Co02> go to cost> analysis -- Select the layout cost treand In The layout add the value and cost element, You can see the complete detail
    Material cost is picking from Material master as per the price control
    activity cost is picking from KP26
    Over head cost is picking from IMG> CONTROLLING> cost center accounting > actual posting>period end closing> overhead>costing sheet component--> Define percentage overhead rates
    Then find the appropriate tables for the same

  • Target cost not appearing in process order

    Hi All,
    Please let me know the reasons for target cost not appearing in process order.
    Thanks,
    SAP PQ

    Two more scenarios:
    1. You have co-product.
    2. You reverse the variance calculation.
    It will show the target cost only after you run variance calculation.

  • MTO --- How can one verify costs are tracked at sales order level

    PP members:
    In MTO -- costs are tracked at sales order level, how can one verify that costs are tracked at sales order level
    Are there any settings/fields in master data to look into for <b>identifying costs at sales order level</b>,
    Thanks for your time

    Hi suren,
    on the top you will see "sales document" "edit" "goto" and then you have "extras".
    On the dropdown you will see "costing".
    Regards,
    Satyajit

  • Actual Costs and Activity Type - Process Order

    Hi,
    I'd like to know if there are any tables recorded with activity type and actual costs from process order.
    Thanks in advance.
    Osmar Tardivo.

    Osmar,
    Check table COEP

  • Target Vs Acual Cost Comparison for multiple process orders

    Dear SAPians,
    I want to take a report for target vs actual cost for all process orders and product cost collectors created in a particular period. I have checked the standard report KKBC_ORD that serve my purpose but for a single order. I want the same report for multiple process orders and product cost collectors.
    Is there any standard report or should I create a report painter report. I have tried to create a report painter report based on library 7KO, but target cost was not showing for selected order.
    Kindly suggest.
    Shirazi

    Target Costs are available in library 601 for internal orders (and can be used for process/production orders).
    Regards,
    Adrian

  • Total Target Costs not updated in Process Order

    Hi All,
    I  have a scenario in a Process Order,
    The Process order is Released, Goods Issued and GR done. But the when i go and check the Cost Analysis i did not see anything in the Total Target Costs  and Total Target Qty coloumns agianst all the cost elements. It show as zero for all.
    It looks very strange. There is variance in the component issues and GR  as well. I simulated for the same material with a new Process order and found the vales get populated automatically on GI and GR's with variation against requirement quantity.
    Could any one explain me why it is so ..? or is my understanding is wrong.....?
    Thanks for your time and patience.
    Regards,
    Srinath V

    Srinath Venkatr,
    I think you are missing PP CO integration configuration during master data creation. There might be information massage to you during process order creation saying , 'Logs during Cost calculation", you are skipping the same and creating process order withought resolving the same.
    Check whether you followed all the steps for product costing.
    Material master,
    BOM,
    OPKP:-Controlling area-activate components and Controll indicators
             :- Assignment of co codes
    KS01: Cost center
    KA01/KA06:- Primary/ Secondary Cost elements
    KL01:-Activity Types
    KP26:- Activity Price Planning
    Then Work center/Resource- assign these cost center and activities with costing formulas.
    Then Routing/Recepi-
    After master data, demand management,MRP- process order. while creating process order check cost calculation errors.
    Hopes that will clear your dought
    Tara

  • Costing problem while running Process order

    Hi,
    This is a  problem relating to costing of HALB material.. While doing process order for a fert material (BOM of FERT material contains a HALB and two ROH materials) a window occurs while saving ' Error when calculating costs, see log'. Why is this happening? I have checked the BOM , all components are subjected to cost relevancy (X). For HALB material no values are manually maintained in planned price 1,2,3 fields in Costing 2 view of material master. Do we have to manually maintain or will it be taken from the ROH materials in HALB BOM. For ROH materials values are comin in planned price 1,2,3 fields in Costing 2 view . If this has to be done what is the configuration. The ultimate issue is while running process order for FERT material no costing is happening for HALB material.Pls share your suggestions. Rewards assured.
    regards
    Ashok

    Hi,
    when you have raw semifinish and finish material as in sequence then first order of semifinish has to be created and it will capture raw material cost and other expences if incurred after confirmation of semifinish material you will be able to create a finish material production order b' cause that semi- finish material yo have to consume for finsh order.
    if at all first sfg order has updated the price of sfg (after settlement of order) then it will take correct price for finish material
    reward points if you find it useful.

  • Target costs not displayed in process order

    Hi,
    We have set up a small PI scenario. The issue we are facing is that the target costs are not displayed in the order. Actual costs appear after confirmation, but target costs appear as zero.
    We have maintianed cost relevancy in work centers, defined valid activity types, maintianed price in material master for all components and also run the standard cost estimate and released it.
    Please let us know what we are missing and why this error could be happening?
    Thanks in advance,
    Ashok

    Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order,
    You need to define the following,
    1. Variance Key - Transaction "OKV1"
    2. Assign that to Plant using "OKVW"
    3. Define Variance Variant using "OKVG"
    4. Define Valuation variant for WIP/Scrap calculation using "SPRO"
    5. Define target cost version by assiging sl no 3 & 4 and also how the cost calculation should be used.
    Once this activities are completed, execute production/process order and then after goods movement and some confirmations process Variance using "KKS2" as a period end activities.
    Edited by: sarin toms on Dec 2, 2008 2:26 PM

  • Target Cost in the settled process order become zero after cost deletion

    Dear all,
    User has standard cost estimates created in Jan 2010 that valid until the end of 2010 for every material in the system.  user created a process order in April 2010. Target cost of the order was created based on the standard cost estimate and recipes as well as order qty.    The order was also confirmed and settled in April 2010 without problem. 
    However, after I deleted all old costing estimates before I did a costing run for all materials in May 2010, the old order was resettled and all Target cost is removed from the order.  I guess system try to look at April costing estimate but it is not there since it was deleted before I created the new costing estimate in May.  Therefore, all varainces are throwed into remaining variances since the target cost become zero.
    Other than mark the settled order for deletion or keep all old costing estimates,  I am just wondering is anyway in the configuration to prevent the system to recaculate the target cost again for the settlement so I can avoid the problem happens?
    Thanks.

    Hi,
    Target costs are only calculated after goods movements have occured on the order, the Target Costs are then calculated during the Variance calculation.
    Target costs will only be calculated after the first goods receipt has been posted to the order. Also you have to ensure that the information to calculate target costs exists on the system in particular in OKV6.
    This estimation is based on the customizing for the Target cost version in transaction OKV6 as in turn will the "real" calculation of the Target costs via the variance calculation.
    So in OKV6 the Target cost will be based on preliminary costing on the order, an alternative cost estimate or the current standard cost estimate. Importantly if the choosen option is not fulfilled e.g. no current standard cost estimate, the target costs will not be predicted or calculated.
    regards
    Waman

  • Reg: Need to capture cost / energy consumption in process order

    Dear Friends,
    I need your valuable advices for one of the following
    I have a scenario where for one of the process , we are generating Energy(heat) in in-house b y burning coal.
    We are manufacturing steel Pellets , and it is continuous process at the end of the process these steel pellets are heated upto 1200DegC in furnace,
    and for this we are generating energy in in-house by burning Coal on the other side.Now i need to capture this energy cost in my process order. And also i need to have shift wise energy consumption report.
    So let me know how can i achieve this..?
    Can we achieve by defining is as an extra activity type..? if yes , please let me know how and also necesary formula to achieve this.

    1. Define New Std Value in your std value key. Say E0001
    2. Now Ask Costing person to Create New Activity Type say ENG01
    3. Now Decide how you want to calculate your Energy consumption will it based on you Order qty or It will based on the Machine run time.
    4 Now give the std values in Routing as per Operation qty or Machine Run time
    5. If is is based on Based on Operation Qty The formula will be
    ENG01 = (Order Qty x Std Value of Energy)/ Operational Qty.
    6. If it is Based on Machine run say 24 hr will burn 1000 joule
    Then formula will be =
    Machine run x Std value of Energy as in Routing.
    Take help of your Costing guy to arrive at the Formula.

  • Control Costs not Displayed in Process Order Cost Reports

    Hi
    After Variance calculation and settlement of Process Orders also COntrol COst appearing as Zero, is there any step I am missing or any configuration needs to be adjusted?
    Thanks in Advance
    Regards
    Venkat

    Hi,
    I checked in IDES system as well, there also using standard settings control costs are not getting updated on the process orders. 
    I couldn't makeout how the control costs fields get updated in the process order cost reports
    Regards
    Venkat

  • Costing Error While creating Process Order in COR1

    Hi when i am trying to release the process order in COR1, I am getting the below error *The business transaction
    cannot be carried out*
    System status CSER is active (ORD 00000000001)
        Message no. BS013
    Diagnosis
        Object ORD 00000000001 has system status CSER (Error in cost
        calculation).  According to this status, transaction 'Release' is not
        allowed.
    Procedure
        You can only carry out the requested function if this is allowed
        according to the status of the object.
    Kindly Help me to fix this issue
    thanks
    Kishore
    Edited by: Emergys Corp on Jan 6, 2010 8:23 AM

    hi,
    goto OPJH and check the nature of the status profile assigned to the PP order type..
    hope this mite help
    regards
    sayeed

  • At the time of confirmation Costs are loaded to Production order

    Dear All,
    At the time of confirmation of the Production orders the costs are not
    debited/loaded to the Production order. They are not
    credited to the cost centers although all the necessay master data (Work
    centers, Cost centers, cost rates ) is there in SAP.
    Please help me..
    Regards
    janardhan

    >
    Janardhan CH wrote:
    > Dear All,
    >
    > At the time of confirmation of the Production orders the costs are not
    > debited/loaded to the Production order. They are not
    > credited to the cost centers although all the necessay master data (Work
    > centers, Cost centers, cost rates ) is there in SAP.
    >
    > Please help me..
    > Regards
    > janardhan
    Janardhan,
    1. Check whether the operation is assigned with Costing Relevancy Indicator and has a control key relevant for costing.
    2. Check whether in the routing the activity type is seen and it has some standard values maintained.
    Regards,
    Prasobh

Maybe you are looking for