Planned Independent Requirement Not getting displayed in MD04
Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P Singh
Hi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali
Similar Messages
-
Sale order with item category TAN not getting displayed in md04
Hi,
We have a sale order with item category TAN, Schedule line category CP, MRP type ND and availability check as 07. This is not getting reflected in md04. But item category TAB gets displayed under the PR number.
Please let me know what checks to be made or changes to be done for the sale order with item category TAN to get displayed in md04 screen
Thanks & RegardsHi all,
I changed the MRP type to PD, and from the next sale order, line item onwards, it was getting displayed in md04 screen. The already created one anyway dint get reflected. So I had to delete the line item and create a new one.
Thanks all for the help
Regards,
Jegashree -
Problem with gross requirement planning pir is not getting reduced
Dear Gurus
I am trying to use strategy 11 for a particular finished product.(having bom and routing)
In the material master I have set mrp type pd lot size ex .strategy group 11, mixed mrp 2,item category group norm, availabilty checking group 02 .
Then I made manually pir for that material in md61 with BSF requirement type .
Then ran the mrp for that material in md02.
Planned orders came .(In md04 screen that gross requirement line text also came as usual )Converted them to prodn order and then did the gr in mb31 with 101 mvt type. After doing the gr the pir should get reduced in md04 screen which is not happening . Where I am going wrong
Regards
Sandip SarkarDear Sandip Sarkar,
It usually happens run MRP and ckeck.
Strategy 11 in summary :-
1. Sales Order creation - no impact.
2. Goods Receipt - minus the quantity for the oldest planned independent in demand management.
For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
3. Delivery - no impact as delivery is issue from sales order.
This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
You need to maintain the following master data for the finished product:
Maintain strategy group 11 on the MRP screen.
Set the Mixed MRP indicator to 2 on the MRP screen.
Maintain the item category group (for example, NORM) on the Sales Organization screen.
Maintain the Availability check field so that you perform an availability check without the replenishment lead time (checking group 02 in the standard system).
Strategy 10
Stock is taken into account Yes
reduction of planned independent
requirements takes place during u2026 u2026 goods issue for delivery order (discrete production),
11
Stock is taken into account No
Reduction of planned independent
requirements takes place during u2026 ... goods receipt for a production
order (discrete production),
for a planned order (repetitive
manufacturing), or for a purchase
order (trading goods).
Edited by: Vachanala Rajasekhar on May 7, 2010 11:55 AM -
BOM is not getting displayed in case of centralized planning plant.
Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh KapoorHi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh -
MD06 Issue - Planned orders not getting displayed
Hello,
Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator.
I am running MD06 report with the following parameters:
Plant
MRP Controller
Exeception Group - All exception selected except 8-Terminations
Processing indicator - Only unprocessed MRP LIsts, Only with new exceptions
My material which has a newly created planned order thorugh MRP run with exception "1 - Newly created order proposal" does not get displayed.
Only when I specify Only processed MRP lists or All MRP LIst in the processing indicator, this material gets displayed. The planned order is for a Stock Transfer order to this plant (receiving plant). How is the MRP LIst processed?
Please help me out with this issue.
Sincerely,
KetanHi Ketan,
When you execute the MD06 report, you would find a column with the heading CI, if am right it would be just after the MRP cntlr, here you would find a Pencil & a tick mark. If you find them both, it means the row is unprocessed, but if you find only a tick mark it means that the row is processed.
So now check for the planned order, it would be just a tick mark & hence would be showing only for the processed MRP list or all MRP lists.
To process a row or unprocess, just click on the icon & it changes.
Check & revert if it answers your query.
Regards,
Vivek -
Planned Independent Requirements Extractor (t/c MD63)
Hello,
Is there a SAP-delivered extractor for Planned Independent Requirements Extractor (t/c MD63)? This is very "MD04/05 like" but it additionally contains any actual withdrawals.Hi,
1. Go to Transaction code MD79
2. Give the Following details
Plant
Version : The respective PIR version
Requirement date:
3. This will allow you to select all the PIR in the respective plant and as per the selection condition
4.Then hit the execute button
5.You will get a pop up as
EXPORT LIST OBJECT TO XXL
6.And in this by can selec the TABLE
7.Then You get a Popup for Microsoft excel
Now save this sheet ...this will display you the the PIR in the whole plant
This is the only standard report available...for the PIR display..
Kindly let us know if this information was useful and solved your problem..
Reg
Dsk -
Budget is not getting displayed in Report S_ALR_87013558
Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
Please treat this as quite urgent.
Regards,
Manohar NHi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva -
Urgent - Deletion of Planned Independent Requirements
Hi
I need to delete Planned Independent Requirements (MD62). I tried using the bapi 'BAPI_REQUIREMENTS_CHANGE' setting the delete_old parameter to 'X'. However this does not delete the planned independent requirement.
Plz suggest a method for deletion of PIR programatically.
Thanks
VijayHi,
Have you checked in ECC MD04 tcode. What is the date it is showing there?
If in MD04 date of ind. requirement is showing same as APO then there is no problem it is expected behaviour.
If not Try running CCR to correct inconsistency. -
Plan independent requirement?
hi
what is plan independent requirement and what is the link with it sales order.is it made after sales order or before sales order.please explain in detail.also please explain what is the the difference between
mrp type PD and VB.
regards
sanjayAs the name suggests ,it is independent on sales order or any other orders. It is the input to MRP. If for a material you are creating PIR in MD61 as 100 in 1 month, It means you need 100 qty of that material produced in your plant after one month. It is independent.
Then MRP will give you the procirement proposals like purchase requisitions(if externally procured materials are short of the requirement..i.e for 100 qty) and planned orders(if inhouse materuals are short of the requirement..i.e for 100 qty)...
PIRs are those which are created by you.. you can create them at any time. MRp will take care of making the necesary materials to be available for that requirement...i.e it will prompt us the dates on which the materials have to be available in the plant to meert the requirement...
PD and VB:
PDwill work with BOM structures.
Imagine the final material A , and its component B
you need 2 pieces of B to produce 1 piece of A.If you work with PD and you receive for example a sales order for A of 10 pieces , the MRP with PD will determinate that you need 20 pieces of B taken into account the sales order delivery date.
The system will use the BOM to know the quantity that you need. You will not have additional stock for the component B. The system will procure when and how many pieces you need.
IF with the same example you work with VB for component B, then you have to define a reorder point (example 5).
If your stock is bellow that level ,the system will procure to get again the reorder point level. If you have enough stock (example 30) the system will not create any purchase requisiton for B, independent of the sales orders of A , and the reservation of 20 pieces.
When yuo work with expensive components you should use PD , because you don´t have stock without pegged requirements.
if the materials are cheap and you need to have allways some stock , you can define VB as planning type.
karthick -
Update for Planned independent requirements MD61
Hello,
I'm doing update for Planned independent requirements, from excel file for plan, than incuding material and quantity per period, using transaction MD61. I have the next inputs:
- Reqmts plan
- Plant
- Version
- Planning horizon
- Planning period
I tried with 2 possible solution, with differents problems:
1. Batch input to MD61: Here I have the problem with go to the next page, for quantity more than the rows displayed in the table control of dynpro in MD61. it does not work with OK_CODE '=P+'and I followed differents advices of other post in SDN but anything worked.
2. Function module: BAPI_REQUIREMENTS_CHANGE and BAPI_REQUIREMENTS_CREATED, I deleted all materials for plan before the update through batch input (this works) then I can use both Function Modules. The problem in this solution is that when I have planning period: 'P' or 'K' the system saves the plan with inconsistences for variant of period or calendar (this information is managed in batch input on MD61)
Thanks for your suggestions,Hi,
Following are the tables
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent requirement index for customer req.
Regards,
Vishal -
Portal Forms are not getting displayed in the new oracle environment.
Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
TomHi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection . -
Header not getting displayed in the next page in the second table
Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin HadaHi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL. -
Problem in BADI, error message not getting displayed
Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
AND l_s_eban-matnr EQ space.
MESSAGE e000(zm_msg) WITH 'You cannot create'
'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji -
Standard screen not getting displayed in a zcopied prg
Hi Freinds,
(In sap4.7 ) I had copied QA32 into a ZQA32 and had added some validation checks before user Chooses Defects Button,,this ZQA32 works till that point fine but when the Defects button is chosen,,it gives a call to Tcode QA11 ,with the initial screen fields filled up,,
in the normal processing of QA32 when QA11 is called,,it is also filled up with some intial values carried from previous Tcode QA32 and after User presses execute button in QA11 intial screen ,further a screen(200) with 3 radio buttons pops up,,
my ZAQ32 is failing at this point though the line of code where the screen is called (call screen 200 ...) is reached with no variations in values of any of the variables in comparison with when it is called from QA 32,
the screen 200 is not getting displayed if i reach QA11 thru ZQA32,,,
Though it is ALSO calling QA11 and hence the program control is tranferred to QA11, but still the screen is not geting displayed,plz tell me where i went wrong??
Thanks in advanceHi Sri lakshmi ,
You should debug the code starting from call to QA11 and check if will the conditions are met for call of pop up screen.
This will give you an idea, as what is exactly required for this pop up to appear.
Hope this helps you. -
First Cell value in the first row of the structure not getting displayed
Hi Friends,
We've got one structure at rows level, there as per our requirement i've taken around 12 "New Selections", that's ok i'm getting everthing fine, but whatever the new selection i put on the top of that structure in that, the First Cell Value for the first column not getting displayed...
I'm really wondering, this is the first time that i'm facing this kind of problem... what might be the reason & what is the solution for that...
just awaiting for your inputs...
Regards,
Balaji Reddy K.There is no declarative way to do this as the table rows are stamped. This means there is no way to can access a value like (row+1).attributename
So there is some coding needed. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html which might help you to implement your case.
Timo
Maybe you are looking for
-
BW system Copy Wrong Datasource in RSA1
Hi, I have done BW system copy, when trying to load / extract data in RSA1 getting following error "Datasources are still pointing to source system" I have checked configuration as follow: 1. executed BDLS 2. Assigned logical system to BW client 3.
-
I had my 17" Studio Display set up as a secondary display on my Mac system. I was working this morning and suddenly its screen went black. The ready light was normal, not blinking. The primary display, a 20" cinema display, was fine. I'm unable to co
-
How do I clear the file list in "Grab"?
When files are saved in Grab, they also go onto a list which is accessed from the Grab icon in the dock by right mouse clicking. Even after the file is totally deleted from everywhere including the trach bin, the file name still appears on the list a
-
Can't Get My Share Button To Work Properly.. HTML Code Difficulties
Hello I have a share button on one of my pages of my website (for facebook) but i can't seem to get the "title", "description" and "image" to work properly on the preview when its posted on peoples walls. It just seems to scan the website for informa
-
How to get image RGB/16???????? (cont)
VRect currentRect; int32 progressTotal = tilesVert * tilesHoriz; int32 progressDone = 0; // process each tile in order currentRect.top = 0; currentRect.left = 0; currentRect.bottom = tileHeight; currentRect.right = tileWidth; // don't go past the doc