Planned Independent Requirements Data Conversion

Hi, I am currently trying to figure out what data I need for converting Planned Independent Requirements from Oracle 11i to SAP. Can someone explain to me what equates to a PIR in SAP from Oracle?
Thanks in Advance,
Brian

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Similar Messages

ATP against planned independent requirements

I have set up materials that are linked to planning materials using strategy group 63. I have tested setting the planning material consumption to a 2 for forwards/backwards and 3 for forward only. I have set up planned independent requirements by week.
When I book a sales order it gives me a material availability date that is in the week prior to the availability of the material based on planning. For example I have 100 parts available for week 30 which starts on July 21 yet my sales order shows a material availability date of 7/16 and a goods issue date of 7/18. How can I ship the goods if they are not available yet. Any ideas on what could be wrong??
Many thanks for any and all help!!
Debbie

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Sales Orders Assigned to Planned Independent Requirements

Hello everyone
I am trying to write an SQVI query which will show me which sales orders are confirmed against which planned independent requirement; so it will show the same data as MD73.
Is there a table which links the sales order to the PIR?
Thanks
Jen

Dear ,
Find below the table required by you : Go to Se 16
PIR Table : PBIM ,Here you will find Sales Order Filed : KDAUF
Please Check PBED and PBIC which is also useful .
Regards
JH

Urgent - Deletion of Planned Independent Requirements

Hi
I need to delete Planned Independent Requirements (MD62). I tried using the bapi 'BAPI_REQUIREMENTS_CHANGE' setting the delete_old parameter to 'X'. However this does not delete the planned independent requirement.
Plz suggest a method for deletion of PIR programatically.
Thanks
Vijay

Hi,
Have you checked in ECC MD04 tcode. What is the date it is showing there?
If in MD04 date of ind. requirement is showing same as APO then there is no problem it is expected behaviour.
If not Try running CCR to correct inconsistency.

Plan independent requirement?

hi
what is plan independent requirement and what is the link with it sales order.is it made after sales order or before sales order.please explain in detail.also please explain what is the the difference between
mrp type PD and VB.
regards
sanjay

As the name suggests ,it is independent on sales order or any other orders. It is the input to MRP. If for a material you are creating PIR in MD61 as 100 in 1 month, It means you need 100 qty of that material produced in your plant after one month. It is independent.
Then MRP will give you the procirement proposals like purchase requisitions(if externally procured materials are short of the requirement..i.e for 100 qty) and planned orders(if inhouse materuals are short of the requirement..i.e for 100 qty)...
PIRs are those which are created by you.. you can create them at any time. MRp will take care of making the necesary materials to be available for that requirement...i.e it will prompt us the dates on which the materials have to be available in the plant to meert the requirement...
PD and VB:
PDwill work with BOM structures.
Imagine the final material A , and its component B
you need 2 pieces of B to produce 1 piece of A.If you work with PD and you receive for example a sales order for A of 10 pieces , the MRP with PD will determinate that you need 20 pieces of B taken into account the sales order delivery date.
The system will use the BOM to know the quantity that you need. You will not have additional stock for the component B. The system will procure when and how many pieces you need.
IF with the same example you work with VB for component B, then you have to define a reorder point (example 5).
If your stock is bellow that level ,the system will procure to get again the reorder point level. If you have enough stock (example 30) the system will not create any purchase requisiton for B, independent of the sales orders of A , and the reservation of 20 pieces.
When yuo work with expensive components you should use PD , because you don´t have stock without pegged requirements.
if the materials are cheap and you need to have allways some stock , you can define VB as planning type.
karthick

Uploding MD61 (Planned Independent Requirements) Using BAPI

Hi,
i am using BAPI_REQUIREMENTS_CREATE for uploading the planned independent requirements (MD61).
The flat file structure is like
Mat. Number...................Week 01 Forecast...................Week 02 Forecast..................Week 03 Forecast.
2011905..................................907........................................911..........................................916
the problem is i am uploading material no and week 01 forecast. i am unable to upload remaining quantities for the same material no.
plz help me regarding this.

I haven't used the BAPI to change Independent requirements, but there are standard transaction MD74, MD75 and MD76 to reorganize Planned independent requirements by date. These jobs are normally scheduled to run at start of period.

Planned Independent Requirements Extractor (t/c MD63)

Hello,
Is there a SAP-delivered extractor for Planned Independent Requirements Extractor (t/c MD63)? This is very "MD04/05 like" but it additionally contains any actual withdrawals.

Hi,
1. Go to Transaction code MD79
2. Give the Following details
Plant
Version : The respective PIR version
Requirement date:
3. This will allow you to select all the PIR in the respective plant and as per the selection condition
4.Then hit the execute button
5.You will get a pop up as
EXPORT LIST OBJECT TO XXL
6.And in this by can selec the TABLE
7.Then You get a Popup for Microsoft excel
Now save this sheet ...this will display you the the PIR in the whole plant
This is the only standard report available...for the PIR display..
Kindly let us know if this information was useful and solved your problem..
Reg
Dsk

Update for Planned independent requirements MD61

Hello,
I'm doing update for Planned independent requirements, from excel file for plan, than incuding material and quantity per period, using transaction MD61. I have the next inputs:
- Reqmts plan
- Plant
- Version
- Planning horizon
- Planning period
I tried with 2 possible solution, with differents problems:
1. Batch input to MD61: Here I have the problem with go to the next page, for quantity more than the rows displayed in the table control of dynpro in MD61. it does not work with OK_CODE '=P+'and I followed differents advices of other post in SDN but anything worked.
2. Function module: BAPI_REQUIREMENTS_CHANGE and BAPI_REQUIREMENTS_CREATED, I deleted all materials for plan before the update through batch input (this works) then I can use both Function Modules. The problem in this solution is that when I have planning period: 'P' or 'K' the system saves the plan with inconsistences for variant of period or calendar (this information is managed in batch input on MD61)
Thanks for your suggestions,

Hi,
Following are the tables
PBIM                    Independent requirements for material
PBED                    Independent requirement data
PBHI                    Independent requirement history
PBIV                    Independent requirement index
PBIC                    Independent requirement index for customer req.
Regards,
Vishal

Planned Independent Requirement Not getting displayed in MD04

Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P Singh

Hi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali

Creating Planned Independent Requirements for an MRP Area.

Hi All,
I am trying to enter Planned Independent Requirements for an MRP Area, with requirement type VSE and I get the following error;
"Only stock requirements are allowed when planning at MRP area level".
I can enter at the Plant level with no problems.
Any guidance is greatly appreciated.
Kevin.

The following is the excerpt from SAP [Help|http://help.sap.com/saphelp_470/helpdata/en/81/470a58ddab11d1b55b0000e82de178/frameset.htm] I think you maintained a planning strategy in the MRP view (for the plant) which doesn't support VSE.
You can delete PIRs from an MRP area by deleting the MRP area number from the Creating Planned Independent Requirements screen and recompiling.
When you define the planning strategies and parameters in the material master, these parameters apply to the whole plant, including all the MRP areas within the plant: You cannot maintain the MRP areas separately.
The integration of the MRP area and the assignment of the MRP area in the sales order is supported only by a user exit in the sales and distribution user exit pool.
Sales orders with MRP areas are created irrespective of the availability check control group in the material master.
Customer order processing of production sales orders with the item category (account assignment Step E Single) is only maintained in the MRP area of the plant.
In Customizing and in the MRP area user exit, make sure that when transferring individual sales orders, only requirements types KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE are generated.
The following requirements types are valid for the MRP area: KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE.
You cannot plan with preliminary planning materials in the MRP area.
There is no planning strategy for the material segment of the MRP area.
The planning strategy for the material master segment of the plant is assigned to the material segment of the MRP area.
The consumption mode and the periods of adjustment are derived from the plant in the MRP area of the material master.
Only consumption customer requirements with planned independent requirements are allowed: VSF requirements with KSV and VSFB with KSV.

Uploading Planned Independent requirements

Hi Gurus,
Could anybody suggest how to upload planned independent requirements with LSMW? I have tried doing the same with the direct input method but the standard program gives an error and does not run. Is there any way of doing the same?
Thanks and regards,
Abhik

LSMW Will not work for PIR use BAPI 'BAPI_REQUIREMENTS_CREATE' for PIR creation.
In SE37 You can check this.
Regards,
Ajay Nikte
Edited by: Ajay Nikte on Jun 24, 2008 11:53 AM

Planned independent requirements for MTO material

how can i maintain PIRs for an item that has strategy 20 (MTO)? when i try to access MD61, sap tells me that i need a requirements type, however strategy 20 doesnt really have these,

Hi Raf,
If you are using planning strategy 20 (MTO) then directly create sales order
If u r use planning strategy 10, 11, 40 (MTS) then you can use create PIR (planned independent requirements)
Regards,
Sankaran

Planned Independent Requirements

Can any body tell me what exactly Planned Independent Requirements means and how it differs means from dependent requirements?
Thanks for your time
Thanks Again,

Hi,
To produce a finish material, there should be some requirements. The requirements can be in form of forecast or order based. Order based requirements are triggered by sales order or customer requirements. The forecast can be done in any any system for a particular finished product in SAP or non SAP system. After carrying out the forecast, this can be entered into SAP as planned independent requirements. The term PIR is nothing but requirements which are triggered by planning and not by order.
PIR comes into picture when you are using a MTS or related scenario.
Hope this make it clear to you.
Regards
Vineet

Planned independent requirements for reservation

Dear all,
can planned independent requirements reserve material? if can, how to reduce?
regards
Gang

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Which settings are required to consume calls for stock transfers with planned independent requirements

Dear SAP PP
With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
Regards

Hi all,
IF other configuration is require ? How to implement this requirement?Also please explain in detail. thanks

Planned Independent Requirements Data Conversion

Similar Messages

Maybe you are looking for