Planning application is not visible in calculation manager

Hi,
I'm novice to EPMA.
I have successfully created and deployed an EPMA application,but when i'm unable to see the application(s) under planning node.
As per my knowledge EPMA application by default deployes in calculation manager,if so why the application is not visible.
any suggestions on this r helpful to me
thanks

The issue is resolved now.
The calculation manager service was set to automatic, set it back to manual and restarted calculation manager service.
It showed the application in calc manager.
Regards.
Ace

Similar Messages

  • Application not appearing in Calculation Manager

    Dear All,
    I have created a new application on test environment, but it is not visible in Calculation Manager.
    Checked the application process, its the same i use to create applications previously.
    I have done the same for creating applications on multiple times with no issues. Any thoughts what can go wrong
    Note: A few days back the Calculation Manager stopped responding when we try to open the calculation manager through workspace we raised an Sr, Oracle support suggested to re-deploy the
    calculation manager configuration with database schema and increased the jvm xms size from Operating System Registry for calculation manager.
    Regards
    Ace

    Deployed with Default Application Group, And For Rules its deployed with calculation manager,
    we have done these all steps, but when we open calc manager to import business rules in new created application, it doesn't show us our new created application.
    While Planning shows newly created application.
    Regards.
    Ace

  • List of planning applications does not appear

    Hello,
    in EAS i create New Rule -> in Rule Editor displays in right pane -> i click on Select outline -> The Select Database Outline dialog box displays -> when i click on +planning -> nothing is displayed: the list of my planning applications does not appear !!
    is this normal?
    N.B : i use hyperion planning V11.1.1.3
    cheers,

    Did you log into the planning application first before logging into EAS, if the planning application service was recently restarted and there have been no logins to the applications then they won't appear.
    As a test log out of EAS, log into one of the planning applications, log into EAS
    Also be sure that the planning applications have been created to use Business Rules and not Calculation Manager if you want to use EAS.
    If you are still having issues then it may be worth having a read of the following document on Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Firefox Downloads not visible in Download Manager sinze FF 16

    Firefox Downloads not visible in Download Manager since FF 16 and now update to 17 still same issue...
    check the show downloads and the rest even resting the download folder..

    I can see the files while being downloaded only when they are done.. they disappear

  • After Upgrade from 11.1.1.3 to 11.1.2.2 Essbase Application Not Shown in Calculation Manager

    I have upgraded from EPM 11.1.1.3 to 11.1.2.2 and now want to import Business Rules to Calculation Manager for use with Essbase.
    However I cannot see my Essbase Application in Calculation Manager; (only the provided sample applications are shown in the hierarchy)
    How do I check my configuration? How does Calculation Manager connect to Essbase and find my app?
    I haven't knowingly altered Essbase server/port details during the upgrade as I opted not to re-host.

    Yes the EAS schema was upgraded by the configurator.
    I ran upgrade_ps2.sh (unix) without changing any configuration just to see what it does and (after I had to manually create the directory structure for the log file) it created an HBRrules.xml file successfully fo the first time under EPMData/planning (The missing log file directory structure may have been why the configurator didn't create the HBrrules.xml file at the first attempt during the Planning upgrade)
    Anyway not entirely sure where upgrade_ps2.sh got its rules information but the file it created was very similar to the HBR file exported from EAS prior to starting the upgrade.
    I attempted a 'migrate' again with Calculation Manager but still get the "No objects were found in the document for importing", i.e. kind of back to square one.
    I really need to understand what is Calc Managers problem?
    Q .What server should the upgrade_ps2.sh be run on? Planning or Shared Services? (I did it in on both)
    Q. How can I get Calc Manager to tell me more with logging or tracing somehow?
    Any other suggestions gratefully received
    Many Thanks

  • Execution Plan Run is not visible in Current Run tab

    Hi,
    I have created the EP and I have build the EP successfully. After that I am clicking on the Run tab. It says the task has been submitted succesfully to the DAC server.
    But, when I am seeing the status in the Current Run tab and also in the Informatica Monitor, My EP run was not visible. There is no record created for this run in the Current Run tab.
    Anyone has faced this kind of issue earlier. Please advice me how to resolve this issue.
    Regards,
    Saleem

    Saleem its strange. I did not came across this any time. Is it happening for all the Execution Plan's. By restarting the DAC server is it working. Sometimes we may face these kind of problems with DAC and with restart most of them will be resolved. If it gives problem always then there is somthg wrong i believe.

  • Planning applications are not diplayed in the planning web

    Hi
    i have installed all products of hyperion 11.1.1.3 and my problem is iam able see the planning applications in workspace,but when i access the planning application through web i got the error like
    No applications are available. please suggest me how to get applications through web.
    Thanks
    Ravi
    Edited by: user6639 on Oct 7, 2009 11:33 AM

    Hi,
    Try below steps:
    1. Open Planning application in workspace
    2. Click "Administration" menu and click "Manage Properties".
    3. Click "System Properties" tab and find "CREATOR_URL" property.
    4. Copy and paste the vlaue URL of this property in a web browser and see if you still don't see the applications in a drop down
    Let me know if it helps.
    Cheers
    RS

  • Planning application is not appearing in workspace

    Hi All,
    i have created application in hyperion planning from Appwizard,
    when i trying to open application from workspace am not able to see hyperion planning path to open Application.
    am not understand how to solve prb i try to redeploy in configurator but it is asking for new port number which is not used
    can any one help me in sloving this issue.
    but in shared service application is appearing.
    Thanks in advance
    Regards
    SM

    Depending on version you may not be using the default cluster/instance or it may not be active Re: Not able to see planning applications in the drop down list in 11.1.3
    If it is not that that then the foundation web server may need configuring again.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Planning application is not opening

    Hi experts!!
    my question is related to Hyperion Planning application.
    I'm trying to open the planning application thruogh workspace/planning but it's not opening.
    I searched planning server log and found the following :
    ####<Oct 25, 2012 3:48:49 PM IST> <Error> <HTTP> <HYPERIONAPP> <Planning0> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1351160329704> <BEA-101107> <[ServletContext@65743393[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:null version:11.1.2.0]] Problem occurred while serving the error page.
    java.lang.NoClassDefFoundError: com/hyperion/planning/HspCSM
         at jsp_servlet.__error._jspService(__error.java:658)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:176)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
         at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:745)
         at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:593)
         at weblogic.servlet.internal.ErrorManager.handleException(ErrorManager.java:186)
         at weblogic.servlet.internal.WebAppServletContext.handleThrowableFromInvocation(WebAppServletContext.java:2266)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2115)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    please reply if anyone knows about it...it's urgent!!

    Have a read through Re: Creating new Data Source Error - Database connection Failed
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Application Components not visible in SAP R/3 tree

    Dear All,
    We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
    In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
    How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.

    You can also Replicate a single datasource w/o replicating the  App Comp using a FM.
    BW
    SE37
    RSAOS_METADATA_UPLOAD
    Execute
    Give Source System n Datasource - Execute
    *Give Datasource Name - for I_O... & Source System for Logsys.

  • Default Web Application is not visible in Weblogic Console

    We are using Weblogic 5.1.0 SP7
              We moved our Application from the Implicitly Defined Default Web
              Application which is configurated by the
              weblogic properties to a Web Application. Because we don't want to
              change any URL in our Application, we
              decided to deploy it as Explicitly Defined Default Web Application.
              By this we recordniced that the weblogic.httpd.defaultWebApp property
              worked not that way descibed in the
              Weblogic Documentation. You have to write the path to the WebApp not the
              name!
              So we have the following Entry in the weblogic.properties:
              weblogic.httpd.defaultWebApp=i:/if_home2/web
              This works fine. The Server starts and serves the WebApp the way we
              expected. But wenn we start the Weblogic
              Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
              applications" folder. This one is empty
              now! Previously the "General" Entry for the Implicitly Defined Default
              Web Application was shown here, which
              showed our Servlets and JSP's and their hit count and parameters.
              So there is no chance to monitor the Servlets and JSP's of the default
              Web Application.
              I tried to deploy our WebApp a secound time with
              weblogic.httpd.webApp.OurApp=i:/if_home2/web
              but this create a second independent WebApp. OurApp is shown in the
              Weblogic Console but it does not monitor
              the hits to the default WebApp. So this is not a solution!
              Any idea to make the default Web Application visible in the Weblogic
              Console?
              

    in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
    Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
    I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
    As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
    please tell me what could be another workaround. 
     

  • Printers are not visible in Print management

    Installed print server feature in Windows server 2012 .We have added few printers in server, but these printers are not visible in printers section of Print management console.Even the default Microsoft XPS writer is not showing up.
    Restarted Spooler service and reinstalled print management console.Server DNS record looks good too.
    Able to view the printers in "Device and printers" .They are not visible only in print management console.
    Thanks

    Hi Daemon_Joker,
    Please check if some necessary updates need to be installed. Please run
    sfc /scannow command to scan all protected system files.
    Meanwhile, please use
    Get-Printer PowerShell cmdlet retrieves a list of printers installed on the computer. Did all printers display correctly?
    In addition, please open Print Management, click Printer Servers, expand
    your printer server, then right click Printers and select “Add Printer…”. Please check if you will be able to find printers via this wizard.
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Navigator Not Visible in Directory Manager

    On Win XP Pro Oracle Directory service does not start on boot, even though it is set to do so automatically. It will start manually from the Windows services app. After starting the service, oidctl runs successfully from the command line "C:\>oidctl connect=oid90 server=oidldapd instance=3 configset=0 start"
    On start up Oracle Directory Manager (ODM) accepts the orcladmin/welcome logon and displays the connecting message and loading schema message. ODM opens but does not display the Navigator panel. ODM seems to be connected to the database because Objects, attributes, entries etc. are visible by selecting choices from the Operations menu.
    When OID was first installed the navigator sometimes did and sometimes did not display. Now it is never displayed.
    Any suggestions appreciated.

    Hi Jay,
    I am a Business Analyst and would like to get Oracle Workflow running so I can play with Workflow Builder. I'm just trying to get my hands dirty with this stuff. I want to use OID as a directory server for workflow.
    I uninstalled 9.0.1.1 in installed 9.2.x.x. The results are similar.
    The Bind request to LDAP failed error re-appeared. I had somehow worked around this on the previous install but I don't know how. The command ldapbind -h trburns -p 389 -D cn=orcladmin -w ohwgwead returns Cant contact ldap server. The error seems to be common as it appears in numerous postings but I havent seen a clearly described explanation and solution.
    Do you have access to Oracles knowledge base? It must have a description of this problem.
    I can open ODM after the bind failure by clicking the close icon. Double clicking the banner works in cases where the navigator tree is not visible. Many thanks for that tip.
    Any authoritative information you could provide about the bind problem would be appreciated.
    Thanks again,
    Tom

  • Default Web Application ist not visible in WebLogic Console

    We are using Weblogic 5.1.0 SP7
              We moved our Application from the Implicitly Defined Default Web
              Application which is configurated by the weblogic properties to a Web
              Application. Because we don't want to change any URL in our Application,
              we decided to deploy it as Explicitly Defined Default Web Application.
              By this we recordniced that the weblogic.httpd.defaultWebApp property
              worked not that way descibed in the Weblogic Documentation. You have to
              write the path to the WebApp not the name!
              So we have the following Entry in the weblogic.properties:
              weblogic.httpd.defaultWebApp=i:/if_home2/web
              This works fine. The Server starts and serves the WebApp the way we
              expected. But wenn we start the Weblogic Console the WebApp ist not
              visible in the "myserver/HTTP/Servlet web applications" folder. This one
              is empty now! Previously the "General" Entry for the Implicitly Defined
              Default Web Application was shown here, which showed our Servlets and
              JSP's and their hit count and parameters.
              So there is no chance to monitor the Servlets and JSP's of the default
              Web Application.
              I tried to deploy our WebApp a secound time with
              weblogic.httpd.webApp.OurApp=i:/if_home2/web
              but this create a second independent WebApp. OurApp is shown in the
              Weblogic Console but it does not monitor the hits to the default WebApp.
              So this is not a solution!
              Any idea to make the default Web Application visible in the Weblogic
              Console?
              

    Hello Nadar,
    Tell me how are you starting server in the cluster, through nodemanager or commnadline.
    Kuldeep

  • Webcam not visible in Device Manager

    Hello,
    after a reinstalltion of windows 7 on my HP Pavilion 55SG the Webcam (HP TrueVision HD) is not visible in the device manager. I´ve searched for drivers of it but on the hp page there are none.
    I have already installed cyberlinks youcam, but it says there is no webcam on my pc.
    Is there any key combination to activate the webcam?
    Thanks in advance!

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are facing difficulties with regards to Webcam of your Notebook
    We will surely assist you with this issue
    Firstly I would like you to know that the Webcam might indeed be disconnected - it happens.  The tiny wires that connect the webcam camera are fragile; they might disconnect, become twisted, or be crushed along the hinge area.  The damage can occur at any time, or it may never happen.  I have had some notebooks for many years in which the webcam has always remained fully functional.  Every notebook is different.
    Please click on the below shown link to find the troubleshooting steps to resolve the issue:
    http://tinyurl.com/ogcpk9g for Windows 7
    http://tinyurl.com/ob747gl for Windows 8
    HP Technical Support / Customer Service Phone Numbers:
    http://tinyurl.com/nxjotk7
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

Maybe you are looking for

  • Where exactly are my iBooks stored on my mac?

    i am curious as to where exactly my iBooks are being stored on my mac?

  • SMR app?

    The same question was submitted yesterday to the iMac community by mistake. Sitting by my iMac with a good keyboard I shall expand on the facts. The Settings of my iPad Air 2 and my iPhone 5s both show an app with the name SMR. The icon is a rounded

  • Nesting of two tables

    Hey, Is it possible to nest two tables?

  • Set subform instances

    I have reworked my form but don't seem to have a way to delete my previous post, however, I still have a problem. My form is for building inspections in a certain area. Basically the first building is inspected and the inspector has the ability to ad

  • Import audio across slides

    Hi, I'm using Captivate 6 on NT. I need to import audio across mutiple slides, but I don't get the Split prompt. I went into Preferences and reset the Confirmation Message to prompt me for Split Audio, but I still don't get prompted. I turned on prom