Planning Layout 8A-157

I all,
I would like to find the list of planning layout available on SAP, and especially the planning layout 8A-157.
I would like to customize it via Report Painter, but I couldn't find it anywhere in the system up to now.
I tried transactions CJR2, KPF6, KEPM, KP65.
Thanks for your help.

Hi
Planning layouts you can find in GRR2.. You cant customize layouts starting with a numeric no... You can copy it, make changes and give it a name starting with Y or Z
Once you define this form, click on "Create report" button in the form and your report will be created
Ajay M

Similar Messages

  • Using a variable/drop down list in header of planning layout

    Dear all,
    I have created a simple BPS application for purely GL planning (No CO related objects like cost centre involved). I have the following characteristics in the header of the manuel planning layout.
    Business area
    Chart of accounts
    Company code
    Currency
    Currency Type
    Fiscal year
    Fiscal Year Variant
    Fiscal year/period
    Value type
    Version
    I have created variables for Business area, Fiscal Year, Fiscal Year Period, Posting Period and Version. The client wants either a variable or a drop down list for these characteristics in the header in the web application. When I assign a variable and put the characteristic in header, I get the error message in the web application saying header characteristic can only have a fixed value. Can someone tell me if it is possible and if so than how? I'll be very grateful for any inputs. Thanks a lot.
    Regards,
    Sumit

    Hi,
    When you create a variable, assign some values to the variable. These then become available in the drop down box. Ths first time a Web interface is called, these variable values are initial.As a result, u get the error messages. Select the variable values and then the error message should go away.
    Thanks,
    -NS

  • Not able to view layout in Enhance planning layout UPX_MNTN

    I have created a new layout in BPS0 . In the planning level, i have included User exit variable.
    I selected the planning area in UPX_MNTN. However in Enhance planning layout, i could not see the layout, i had created in BPS0.
    Do i need to do any other settings to view in UPX_MNTN ?

    HI Ravindra,
              I was in the same boat. I had assigned an exit variable in one of the  layout. It was not able to execute the layout till runtime, and that is the reason it doesn't come to Planning services.
            In short, planning services will show when all your variable values are getting populated before layput execution.
            I have another issue, where I want to populate brand based on selected products from CRM. I am unable to accomplish this. Please let me know, if you get any response.
    Thanks and Regards,
    Harpal

  • Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

    Gurus,
    I am facing an issue regarding SAP TPM IP ( HANA)
    I have 3 Infoproviders
    Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
    Issue is  Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
    I tried debugging it and found it is trying to read   i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
    The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated.  So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
    Can any one help,it would be really help.
    Thanks
    Ashok

    Hello Gregor,
    On the launch of planning layout it throws an error message:
    Planning is not possible RSCRM_IMP_CORE008.
    When I debugged, i got to a point wherein
    particular Real Time Planning DSO is
    not getting retrieved under the MultiProivder in below class.
    Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
    returning the real time Info-Provider Name(i.e. Planning DSO)
    underlyingthe Multiprovider.
    I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
    Let me know, if you have any pointers on this topic.
    Thanks,
    Jomy

  • Key figure flag in the planning layout

    Hi,
    Can anyone explain the importance of the key figure flag in the planning layout?
    Regds
    Pavan.

    Hi Arun and  Zegion,
    Thank you for your responses.
    Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
    the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
    Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
    Regards,
    S.P

  • Retreive the values from a user Input Popup before planning layout

    Hi all,
    The user run a planning layout and is coming the popup where he can choose :
    Cost Center
    Currency .
    Is there any function module between executing the popup and showing the layout.
    I have to create a function module to check the entries of the users.
    Regards

    Frank,
    There are multiple ways to ensure that the values entered by the users are valid. A few of them are:
    1. Restrict values for users with in SEM planning area.
    2. Write custom code to restrict values in dropdown list.
    3. Another  way of doing it is by using two sets of variables. One for input by users and the other for passing the values in the planning level. The user would enter a value, the code for passing the value to the planning level, would check the data entered and then either pop up an error message or refresh the layout with the data.
    As mentioned, the approach would depend on the specfic need and the design of the planning application.
    Sunil

  • Planning layout is not working in CRM

    Hi Guru's,
    I have created one planning profile under one planning layout in BW. Then I had configured this pallning profile in CRM-TPM. When I m going to creat Trade Pramotion. The planning layout is not work.
    After puting a Planning Profile Grp. "Volume/Trade Spend" new tab will be appeared Its shows following error
    Error in planning Services
    Error Message count : 0001
    Attribute 0BPARTNER has not value
    It means 0BPARTNER infoobject have novalues. then I had entered Customer Master data in CRM with the help of CRM consultant, Then I have pulled the same data in BW. But still I am facing this Error.
    If you know about this error. Please guide me. I]ll reared to maximum points.
    Regards
    Manoj Kulkarni

    Hi Ravi,
    Hope you would have handled this issue.
    My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
    At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
    Could you pls let me know what I would be missing here.
    We are in very beginning stage i.e testing the connections & communications, yet to start the configuration of TPM in CRM.
    Thanks.

  • Display multiple combination of values all at a time in the planning layout

    Hi,
    we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
    in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
    Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
    output of the layout is as follows for country GERMANY
    CONTINENT Value
    EUROPE 123
    EUROPE 234
    EUROPE 456
    as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
    CONTINENT value
    AFRICA 342
    AFRICA 267
    AFRICA 768
    How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
    CONTINENT Value
    EUROPE 123
    EUROPE 234
    EUROPE 456
    AFRICA 342
    AFRICA 267
    AFRICA 768
    the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
    any help is greatly appreciated.
    thanks

    Hi Marc,
    yes. there u go. my name is hari.
    thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
    we have cube data as follows
    Code Area Group Price
    ABCD EUR 111 20USD
    ABCD USA 222 30USD
    Code, Area, Group are not attributes of each other.
    we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
    after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
    ======
    Header
    ======
    Code : ABCD
    Group: 111  (not visible as Group is hidden in the header area of layout)
    ======
    Layout
    ======
    Area Price
    EUR  20USD
    for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
    ======
    Header
    ======
    Code : ABCD
    Group: 222  (not visible as Group is hidden in the header area of layout)
    ======
    Layout
    ======
    Area Price
    USA  30USD
    we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
    if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
    ======
    Header
    ======
    Code : ABCD
    ======
    Layout
    ======
    Area Price
    EUR  20USD
    USA  30USD
    this might also work out for us.
    ======
    Header
    ======
    Code : ABCD
    ======
    Layout
    ======
    Area Price Group
    EUR  20USD 111
    USA  30USD 222
    How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
    hope it is clear.
    Message was edited by: hari143

  • Problem adding a new field to existing BPS planning layout

    Hi
    I am new to BPS and planning
    I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
    In additional functions of adhoc package they have made setting as set to all possible char combination.
    In this planning area all the selections are locked in planning level and package.
    Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help  with this as to how can i make this field input enabled.This is an independent characteristic.
    Thanks
    Panchan

    Hi,
    Yu need to delete the data to fill the new field again.
    Assign points if it helps
    Regards,
    Srinivas

  • Planning layout can no longer be displayed after transport

    Hello everybody,
    I have transported a planning area with all levels and so on.
    I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
    I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
    I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
    If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
    Could you help me??
    Regards,
    RaMa

    Switch cube Load <> Planning solves the problem...
    Thanks !
    RaMa

  • Issue with order or sequence of wbs elements appearance in planning layout

    Hi Experts
    we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
    In BW - 0wbs element -  hierarchy order is as below
    1
    2
    3
    4
    5
    6
    7
    8
    but when we check the same wbs element in BPS planning layout, it appears as below
    1
    2
    3
    4
    6
    7
    5
    8
    Request you to advice how to correct the order.
    Best Regards
    krishna

    Hi,
    I came across a similar situation once. I dont remember exactly.
    We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
    By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
    Can you check that.

  • Add Variable in an existing planning layout

    Dear guys,
    I have a problem with planning in KEPM.
    in the planningslayout there was defined one variable for record type.
    We want to plan the figures for three record types. In the planning level I added those three record types but I am not able to add more record types in the planning layout.
    Can you let me know how can I add more variable for this chracteristic in the planning layout.?
    kind regards
    udo

    It would also help me to know if it is possible to give an interval for the record type. If we try this, we only get the planfigures of the first record type in the interval.

  • PCA planning layout

    Hi,
    we have to crate a profit center planning layout with users go from top most hierarchy level to the PC level. How can we get all the hierarchy by every level to be available to reach up to profit center level. How can we define the profit center hierachy level.
    I am trying to create the same layout in PCA as the report painter but all the characteristics that are in the report painter are not available at planning layout. Is there any option to get all the characterstics into PCA.
    Thanks,
    Nivi

    Hi Rajiv,
    Thanks for your reply.  I can't understand you explanation.
    I cannot understand from this website although it has some explanation in length.
    http://allian.uclv.net/saphelp/helpdata/EN/e9/f02c7dd435d1118b3f0060b03ca329/frameset.htm
    The question is, I tested:
    One layout with coloumn distribution key and one without distribution key; but the result of the report is same ...
    What are the distribution key or other attrubute values actually for?  Any solid examples?
    Under teh DK columns, there are some selectable values, like the following:
    0     Manual distribution
    1     Equal distribution
    2     Distribution as before
    3     Distribution by percentage
    4     Distribute values to following no-value periods
    5     Copy values to following no-value periods
    7     Distribute according to number of days in period

  • Error message when I calling planning layout in the STS

    Dear
    I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10,  BW 3.5 SP14 ).
    But I got some error messages when I calling planning layout in the STS screen..
    I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.  
    I did
    1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
    2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
    3. Customizing STS
        - Create Sub Plan & Session
        - Asssign Hierarchy to Sub Plan
        - Determine attribute for created planning session ( Bottom-up, Auto mail )
        - Define Header characteristics for planning session to contains the planning package completely.
        - Determine Date, Person Responsible and Layout.
    4. Send Start mail
    5. Open STS Web Start Screen ( using B Unit responsible user .) 
    When he click "Open Planning" icon in the screen the following error messages were happened...
    I've no idea for that because I didn't use any variables or offset settings.        
    I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
    but I could not use lock processing in the STS.
    Could you tell me what's happening to me?
      [ Following error message ]
    Correct the data on variables and offset in character string "? 
    Message Number  UPC_FW092 
    Long Text  Diagnosis
    Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
    Procedure
    Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
    <VARIABLE_NAME> [{ + | - } OFFSET]
    Examples:
    VAR0
    VAR1+1
    VAR2 - 2.
    Also check whether the variable, that you want to use is available in the planning area.

    Hello,
    this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
    It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
    Regards
    Marc
    SAP NetWeaver RIG

  • User-Defined Planning Layouts  - Translations

    Hi Experts,
    Custom Planning layouts have been created.
    I need to translate the form from English to Danish.
    This has to be done in the Development system then moved to Quality and Production.
    This is how I proceeded with the task:
    IMG Path: Project System  Costs  Planned Costs  Manual Cost Planning in WBS  Detailed Planning  Create User-Defined Planning Layouts for Detailed Planning.
    Select Change PS Planning Cost Element/Activity Input Layouts.
    Select Layout ZMY_LAYOUT  Planning Layout  Translate Form.
    Specify Source Lanaguage : EN, Target Language: DA --> Clcik on Translate Button.
    There is a prompt for including the request in a Transport Request. If clicked yes it asks for a workbench Request.
    I specified the workbench request number.
    Select Form --> Object List
    Select the line with form name, Source Text --> Click on Translate.
    Enter the translation -> Save and exit
    However, when I check my request in SE10, it has no objects???
    If I repeat the process, and select Transport form, it asks me for a customizing Request.
    How can I move  my transations from D to Q.
    Regards,
    Reema Shahbazkar.

    Hi,
    No it is NOT a unicode system.
    Regards,
    Reema

Maybe you are looking for