Planning Question
We're trying to set up a Mac Mini to host a proposal system which our sales people will 'concurrently' access remotely. It's presently set up with a PC via Remote Desktop and we want to mirror the process in Mac-land.
Once I set up the users in OSX and enable the Remote Management permissions am I all set on the host side? Then I assume that I need RDC or ADC3 to access the Mac mini host.
Am I missing anything? Thanks for the help.
Message was edited by: JSmall
JSmall wrote:
An Apple engineer just told me that OSX doesn't support Terminal Services like we use in Windows XP.
http://www.aquaconnect.net/?page_id=26
Similar Messages
-
Hi All,
Q1. Performance wise are the following queries both same.
Which one will yield a better throughput and why?
Approach 1
SELECT
e.desig "Emp Desig",
(select count(1) from emp where empid = e.empid and dt_created between sysdate and sysdate -1) "Emp added since yday",
(select count(1) from emp where empid = e.empid and case_solved_count > 10 ) "Emp with case solved counts > 10",
FROM EMP e
Approach 2
SELECT
e.desig "Emp Desig",
Func1(e.empid ),
Func2(e.empid )
FROM emp e
Q2. If we have three tables T1, T2 and T3 with following record counts - Will their sequence of placement in WHERE clause of the query affect performance? (My understanding is it should not)
Table Record Count
T1 5000
T2 500000
T3 50
Need expert advise....
Regards,
Chinmay
Happy WorkingWhere did you get these questions from?
Q1. Performance.. is the same. Which one will yield a better throughput and why?
What is the difference between performance and throughput in this context? How in the world throughput could be better when "performance is the same"?
Performance cannot be the same even when Func1 and Func2 contain no more than exactly the same sub-queries as in the 1st SELECT. Functions are called for each row in EMP and each call leads to so called context switch between SQL executor and PL/SQL. This is expensive and may result in substantial increase of elapsed time given the number of rows in EMP is relatively large
On the other hand if the functions contain no more than dummy NULL statement then 2nd query most certainly would perform better
Q2. It depends. With correct statistics and CBO - no, not a chance. With RBO it depends on
1. What is your understanding of "their [tables] sequence of placement in WHERE clause". There are no tables in WHERE clause, there are predicates that mostly deal with table [pseudo]columns
2. Are there any indexes on the tables
3. Which expressions do you use in WHERE clause
4. etc..
Consider following:
DROP TABLE T1;
DROP TABLE T2;
DROP TABLE T3;
CREATE TABLE T1(C1 NUMBER CONSTRAINT T1_PK PRIMARY KEY);
CREATE TABLE T2(C2 NUMBER CONSTRAINT T2_PK PRIMARY KEY);
CREATE TABLE T3(C3 NUMBER CONSTRAINT T3_PK PRIMARY KEY);
INSERT INTO T1 (SELECT OBJECT_ID FROM ALL_OBJECTS);
INSERT INTO T2 (SELECT OBJECT_ID FROM ALL_OBJECTS WHERE ROWNUM <= 1);
INSERT INTO T3 (SELECT OBJECT_ID FROM ALL_OBJECTS WHERE ROWNUM <= 1000);
SET AUTOTRACE TRACEONLY
SELECT --+ RULE
C1
FROM T1, T2, T3
WHERE C3 = C1
AND C1 = C2
Execution Plan
0 SELECT STATEMENT Optimizer=HINT: RULE
1 0 NESTED LOOPS
2 1 NESTED LOOPS
3 2 TABLE ACCESS (FULL) OF 'T3'
4 2 INDEX (UNIQUE SCAN) OF 'T1_PK' (UNIQUE)
5 1 INDEX (UNIQUE SCAN) OF 'T2_PK' (UNIQUE)
Statistics
1008 consistent gets
But
SELECT --+ RULE
C1
FROM T1, T2, T3
WHERE C3 = C2
AND C1 = C2
Execution Plan
0 SELECT STATEMENT Optimizer=HINT: RULE
1 0 NESTED LOOPS
2 1 NESTED LOOPS
3 2 TABLE ACCESS (FULL) OF 'T3'
4 2 INDEX (UNIQUE SCAN) OF 'T2_PK' (UNIQUE)
5 1 INDEX (UNIQUE SCAN) OF 'T1_PK' (UNIQUE)
Statistics
8 consistent getsFortunately RBO is depricated and unsupported in 10g, so the answer should be NO. -
I am a little unclear how the data plans work with AT&T. I rarely have a need for a data plan, not even once a month, but I would like to have it available for when I do need it as inexpensive as possible. So here are a couple questions I have.
If I sign up for the least expensive plan, and I happen to go over, does it just bump me automatically to the highest usage plan for just that month?
If I use zero dta for a few months, I assume I will still insure the bill anyways. Am I correct in this assumption?http://www.att.com/esupport/article.jsp?sid=KB413502&cv=820#fbid=m8vtNf8NeYg
It will charge you for overages. They renew every month, so if you do not need data for a month or more, cancel it right on your iPad. And yes, if you don't cancel, you'll pay the bill every month. -
Dear friends,
I have created a marketing plan using crm_mktpl, and assigned a marketing org to it.
What happens to the market plan after its created.. how does the marketing manager know that a plan is created and he needs to approve it. where is the link.
My question is, I want to find out like this how many marketing plans are created for a given marketing org / all marketing org.
And how do I link a prospect generated because of a particular marketing campaign when a business runs many to understand the effectiveness of say a TV advt or Newspaper Ad.
RegardsDear Sadhu,
Not sure whether your question was answered.
You can use actions to trigger workflow using actions to send an email to inform the approver. if you can use BAdi and trigger a workflow as soon as a status of the pan is changed.
If you want to see the all the plans for a specific marketing organization or marketing organization, you can use standard search feature. if that doesn't satisfy your requirement, you can write a report by using the tables CGPL_PROJECT, CGPL_TASK, CRM_MKTPL_ATTR.
Thanks & Regards
Raja Pamireddy
CRM Marketing Forum Moderator -
Consumption-based Planning Question
Dears,
I am working on a presentation for a client in order to help them to decide which SAP Planning Tool should be implemented.
Since it is not a production company and it can be considered closer to a wholesale or retail one my question are related to CBP and SCM:
-Is necessary to customize and run the Consumption-based Planning tool in ERP before implementing a SCM tool (either APO or F&R)? Are they independent? Could it be advisable?
-I read in several website that is not possible in MRP to generate Stock Transfer Orders between Storage Location within the same plant. Has CBP the same constraint?
Thank you very much for your help.
L.C.L.C.,
-Is necessary to customize and run the Consumption-based Planning tool in ERP before implementing a SCM tool (either APO or F&R)?
Not exactly. You will have to do some customization in ERP regardless of whether you additionally implement SCM planning, because all of the execution is done in the OLTP (ERP).
Are they independent?
If you mean are ERP and SCM independent, the answer is yes, they are independent. You can run SCM without ERP, and you can run ERP without SCM.
Could it be advisable?
Good question. Depends on your point of view. Establishing a new implementation of CBP is a substantial project. Adding on an implementation of SCM means additional complexity. The payoff is more features. The client has to choose.
-I read in several website that is not possible in MRP to generate Stock Transfer Orders between Storage Location within the same plant.
Neither MRP nor CBP planning can create stock transport orders, they create stock transport requisitions. CBP does not have any more or less restrictions than MRP as far as the creation of stock transport orders or stock transport requisitions are concerned. STR/STOs between storage locations became possible starting, I believe, in ECC 5.0. R/3 4.7 did not support this feature.
Sounds like you are going to need a bit of help with your presentations. The following site contains quite a few high level presentations about SCM planning you might want to incorporate into your presentation:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000187811&
Best Regards & Good Luck!
DB49 -
Teacher CreativeCloud Plan Questions
G'day,
I have two inquiries about the student and teacher creative cloud subscription plan. (I am an educator so I am thinking about signing up for the monthly subscription. I also have owned a student version of CS4 production suite in the past.)
I am a little confused by the following after reading the terms and conditions: 'After the first year we will renew your contract automatically for another year at the then-current standard monthly price (currently at A$24.99/month)' and 'Save 60% on your first year'. Does this mean that after a year, the discounted price for the teacher plan will no longer be applicable, or the current discounted price (which is currently A$14.99 monthly) will change to the price predicted for this plan in a year's time, which is valued at $24.99?
Also, in the FAQ it states that I can use this license for commercial purposes, but in the terms it states ' This pricing is not available to OEM, commercial or volume licensing customers.' Can the teacher subscription plan be used for commercial purposes?
Thanks for your time,
Justinthe current discounted price (which is currently A$14.99 monthly) will change to the price predicted for this plan in a year's time, which is valued at $24.99?
The discount applies once and once only. Once you've taken advantage of the discount (first 12 months only) then you are no longer eligible for it in subsequent years of membership.
So future membership from Year 2 onwards will be the normal price prevailing at that time (currently US$29.99/month but what is the AUD equivalent?).
Not sure how Adobe calculates the 60% saving for the monthly plan (which I guess is at the heart of your question). Looks like a 50% saving in AUD.
Can the teacher subscription plan be used for commercial purposes?
Yes.
Education FAQ
"Can I use Student and Teacher Edition products commercially?
Yes, Student and Teacher Edition products can be used commercially on your privately owned computer. They may not be resold." -
Airport Express/Iphone 3G Installation Planning questions
I'm planning for my iphone 3g and Airport Express and have some basic questions that many of you can answer easily:
1. If initially, Airport Express will be used to get to Internet from my imac (connected to lan port) and from my Iphone 3G, (where my Verizon dsl connection seems to use dhcp), can I avoid a manual setup of Airport Express by using just the basic install Airport Utility screens?
2. If I unplug my hp printer from my imac (usb connection) and plug the cable into the Airport Express usb port (before using the Airport Utility program), then infrequent guest's mac portables could use my printer. Will I be able to use my HP printer from the Safari program in my iphone 3g (or is print via Safari in an iphone not an option)?
3. I currently have a 768k download speed connection with Verizon dsl (speedtest.net says 738 kbps download and 123 kbps). This speed is sufficient for me today (except for some, not all, Internet tv sites--like tnt (via XP under BootcamP) Would this dsl speed be sufficient for a quality voice call from my Iphone through Airport Extreme (using either a voip package or hopefully, an at&t femtocell solution) ?
4. With my basic Verizon dsl connection, is there any reason to contact them to get or give them any information or can I get all the info needed to install my Airport Extreme from my Leopard's network preferences screen?
Thanks for any help you can give.1. ...can I avoid a manual setup of Airport Express by using just the basic install Airport Utility screens?
Probably but you won't know until you get to the point of entering all your settings.
2. ...Will I be able to use my HP printer from the Safari program in my iphone 3g (or is print via Safari in an iphone not an option)?
This is not an AirPort Express (AX) question but an iPhone question. Can the iPhone print to a printer offered via bonjour over Wifi? Something to ask in the appropriate iPhone discussion area.
3 ...Would this dsl speed be sufficient for a quality voice call from my Iphone through Airport Extreme (using either a voip package or hopefully, an at&t femtocell solution) ?
Possibly but it is impossible to speculate on unknown and theoretical items.
4. With my basic Verizon dsl connection, is there any reason to contact them to get or give them any information or can I get all the info needed to install my Airport Extreme from my Leopard's network preferences screen?
Normally you wouldn't need to contact them. Earlier you were talking about an AX and now you are mentioning an AirPort Extreme base station (AEBS). Neither of these have anything to do with Leopard's network preference screen. -
We have two offices that will be consolidated in to one office within the same city. The existing offices are in the same area code. The new office will be in a different area code. According to ATT, the DIDs cannot be ported to the new office.
Each office has its own Route Plan (in Call Manager) and voice gateway.
For the new office, we will be installing a single Cisco 2851 for the VG/PRI and a Cisco 2951 for the data network (via MPLS). We want the network and telecommunications ready before staff move in to the new office.
My question is, can we or should we re-configure the existing route plans to reflect the new circuit/DIDs? Should we create a new route plan? What would be the best course of action for this move?
I don't have a lot of experience with route plans and VG setups so we plan on engaging a contractor for this project.
Any comment or suggestions you may have will be greatly appreciated.
Thanks!Hey Richard,
Personally, I would create another dialplan and then use the bat tool to move the phones from one dialplan to another as the changes are made. If you're not experienced with doing this, I would concur with your decision to hire outside help to do this.
On another note, you could easily use a single 2951 for both the voice gateway and the mpls router. These isrs are made to serve double duty.
hth,
Rick -
Hello,
I have a question regarding the behavior of the horizontal plan. I'm new to the ASCP module.
I have current scheduled receipts let say a Purchase order of qty 20. If i drill down on it, there is
an action of Reschedule Out but the "For Release" and "Firm" are still unchecked. So this scheduled
receipts becomes part of the Projected On Hand for today. The same PO quantity appears under day bucket
on which the suggested due date falls. Isn't this an overstatement?
thanks.
gregg09-aug-10 | ....|...............................
Current
Scheduled
Receipts 20 (action is Rescheduled out
w/ future date like 02-FEB-11)
Proj
OnHand 20
02-FEB-11|...
PO 20 (drilling down the same po that are shown under sched receipts)
It looks like this, there is a duplication the current schedule receipts are counted in the projected on hand, etc
and then the rescheduled PO is counted once again.
Edited by: Apps Devel on Aug 10, 2010 10:03 AM -
Hi,
We qualify as a non-profit for the E1 and E3 plans. We have seasonal staff of which we would like to have access to the E1 plan only and then full time staff of which we would like to have on the E3 plans. Is it possible to split a user base amongst two
plans on the same account and email domain?
Thanks,
Andy PeHi Andy,
Don is right that you might need to post your question in the dedicated forum of
Office 365 Community.
This is because that current forum only focuses on questions and feedback for
Microsoft Office client. There is not so much about Office 365 Plans/Services aspects here:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
We are in the final stages of selecting a budgeting/planning app and Hyperion Planning is one of the finalists.One question we have is are there performance/speed issues if a dimension starts to have a large number of members? If so, at what level? Or cube size? Or is it mainly affected by good optimization of the cube?Also, is there good acceptance and trainability of end users in learning and using the views and any end user parts?Did it meet your needs?Thanks!
This will not work. Your security to dimensions is driven by how you secure individual planning dimensions. Data form folder security is just for data forms. It does not influence how your planning application is secured. You may be able to use other dimension members to achieve it partially e.g. if Folder1 is for product Line 1 and folder 2 is for product line2, you could additionally secure product line PL1 to be read access and PL2 to be write access. You will have to play with other dimension member's security to see what you can achieve.
Thanks,
Sunil
Edited by: sunil k on Dec 10, 2012 2:47 PM -
Hello out there!
I'm a self taught (well, still frantically learning) "designer", so if this question is super fundamental I apologize
I have grand plans for this site I'm building but I can't for the life of me figure out how to layout the planning stages! What I would like would be something like this:
HOME
(with only two buttons
Interiors & Exteriors)
INTERIORS EXTERIORS
(HOME) (HOME)
ABOUT PORTFOLIO CONTACT BLOG EXTERIORS ABOUT PORTFOLIO CONTACT BLOG INTERIORS
The Crew Bathrooms The Crew Whole House
Why We're Cool Kitchens Why We're Cool Windows
Are We Right For You? Basements Are We Right For You? Doors
Other Rooms Historic Restoration
However, when I put it in Muse menus don't work out & pages need new names (I feel like Atreyu in Never Ending Story...)
Like I said I apologize if this is super fundamental, but google has yielded zero results
Thanks!
VanessaActually, Muse does allow two pages to have the same name, just not the same filename.
By default the filename is generated from the name the page is given in Plan view, so that's whether the duplicate name restriction comes from. If you go to Page Properties you can turn off this automatic behavior and make the filename whatever you want as long as it's unique for your entire site.
Every page has the name used in the menu (and Plan view), the title used in the browser tab and search results, and the filename. By default Muse generates the title and filename from the name entered in Plan view, but you can override that in Page Properties. -
SCCMContentLib Planning Question
Let's say I will have a CAS, 2 Primary Sites, and many standalone DP's. Since I have a CAS, I know that I have to prepare to have enough disk space for all the content to be stored in the SCCMContentLib folder on the CAS. I also know that
I need to size the DP's properly since they will also have content in the SCCMContentLib folder.
My question is concerning the primary sites. If I do not install a DP role on the Primary sites will the primary sites still end up with a SCCMContentLib folder with all total content just like the CAS? Let's also assume that the CAS owns all the content
and the Primary sites own a very minimal amount of content.Regarding the CAS, we will have 160,000 clients. I believe standalone primary supports up to 100,000 only, unless that has changed. I would love nothing more than to not have a CAS and just a single primary.
You are correct, so you are already accustomed to pain with that many managed clients :-) although the liking it part is not by choice.
So I misread your question a bit. Ultimately, as long as any DP within a primary site has the content assigned, then the primary site server will also have that content in its sccmcontentlib. So yes, you need to plan for this additional disk space on the
primary site server no matter what. Also note that there is no reason for this to be high-speed/cost storage. You can/should offload this to lower tiers of storage without any impact whatsoever.
Jason | http://blog.configmgrftw.com -
Hello,
The feature 'Select Time Buckets Profile' which can be selected from the icon 'Period Structure' in Interactive Planning in DP when selected after loading data in the dataview, is being applied to only the future horizon.
I tried to use the next feature from the menu 'Set Time Buckets profile', this too gives option to select only 'TB Profile ID (Future)' and gets applied to future horizon.
Is this a bug in the system or it comes like that. If we want the selected TBP to be applied to both future and past, is there any additional setting we need to do to be able to change the past profile on the fly using this feature?
Thanks,
TejThanks Sunitha for your clarification, its a little surprising that we need to change at the dataview level Only for the past horizon. Because in production system, a business user might want to do this , but will not be able to do due to security.
It would be good to have this feature usable for past horizon as well.
Guru Charan,
Not necessarily that Business users will not be concerned about knowing past patterns, sometimes it becomes important to analyse history as well , as you rightly said - 'we are much concerned with how the future is getting affected based on the past data.', It becomes important to analyse both history and forecast in the same buckets and therefore need to be using the same profile both for past and future for comparing on same levels. I understand this is not a bug, but you could say its necessary feature which is missing in interactive planning.
Thanks,
Tej -
For r in (select) loop: execution plan question
Hi there,
I have a procedure which does the following (on Oracle 11.1.0.7):
begin
for r in (select col1,max(col2) as col2 from tab@remote_db group by col1 ) loop
update tab2
set col_a = r.co1
where col_b = r.col2;
commit;
end loop;
end;The subselect from the remote table delivers about 4000 rows.
When executing fast, the procedure runs about 20 seconds, the trace shows that the select is executed 1 time, fetches 49 times. The update executes 4000 times.
When executing slow, the procedure runs about 20 minutes (!), the trace shows that the select is executed 1 times, fetches 4000 times. The update executes 4000 times.
This happens without changing the code, from the same client (sqlplus on the server, same version as database).
Can anyone probably give me a clue how I could track down the plsql execution steps like the optimizer trace that let you see why a certain sqlplan was not taken or what might cause that change in behavior?
I cannot produce that behavior at will - most times the procedure runs fast.
thanks,
HeimoHi again,
regarding the "faulty test" and what is fastest: user tested both versions and came up with the for-loop to satisfy him best. I would, of course, utilize event 10046 and tkprof and a repeatable dataset to have solid data. Sorry for not setting enough emphasis on my real question, which is described in the following.
But, and that is what is really causing awkward feelings for me: when doing plain sql, I can use events 10046, 10053 and learn from the tracefiles why a decision was taken (now that is making me feel good, actually). But when it comes to plsql, I have not yet such a handy toolset that helps me understand what influences the plsql-engine to go this or that way.
Thus, I valued the posts pointing to dbms_trace and plsql_optimization_level as helpful answers.
Because of that I learned about the views %_PLSQL_OBJECT_SETTINGS and remembered to check for other plsql-initora settings.
I also verified that neither the 10046 nor the 10053 trace files contain any reference to plsql-parameters/settings, and that the 10053 trace only shows the subselect and update, but no info if it would "bulkify" or not.
Meanwhile I did start to utilize dbms_trace (which causes the statement to go the unbulkifyed by the way) and maybe I can learn from that output or from following posts?
best regards
Heimo -
Apple Protection Plan Question
Would It be ok to get the apple protection plan on ebay and get it for 150 rather the the 250 from the apple store.. ?
Well - I suppose that you could buy it and if it isn't what they advertised you can get a refund - but read the description carefully.
If it's really AppleCare, and it's for the Mac you have - and it hasn't been used - and Apple says it's OK, then I would do it.
Maybe you are looking for
-
10.2.0.3 installation in solaris
Hi This is sabya. I need to install oracle 10g R2 . The os is solaris 9 (64bit SPARC). I want to know whether there is any 10.2.0.3 s/w version available or I need to install the base version(10.2.0.1) first and then apply patches on it to get 10.2.0
-
Unable to create portal desktop
Hi All, I just installed a NW Portal 7.0, AIX 5.3 OS, DB6 The installation went fine and the portal was working fine. Now I tried to make a new portal desktop, but I get a 'Portal Runtime'error message on the editor screen. Below is the default trace
-
I am trying to update my ipod touch 4 and I am getting a message that says "An error occurred while backing up this ipod - (5000) would you like to continue to update this ipod? Continuing to update will lose everything on this ipod." How can I fix?
-
ITunes Stores... sound format?
What format are the songs purchased off the iTunes library? MP3/4? Just curious, as I'm finding out that the sound quality between MP3's and WAV is different so the quality of the iTunes Store products may not be quite what you would hear on commeric
-
Attachments appear missing in CRM 7.0 after Upgrade from 6.0
We use CRM for SSMS functionality to create help desk tickets which can have documents attached to them which are stored in and retrieved from content server. All was well in the land of CRM 6.0. Since the upgrade to CRM 7.0, when viewing an SSMS tic