Plant Maintenance - Linkage between Task List and Maintenance Plan

Sir,
In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
How to create Maintenance Plan for the above scenario?.
Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
I need some help in this regard. A detailed reply will be helpful.
Can anyone throw some light in this regard.
Regards,
R. Vijayakumar

you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

Similar Messages

  • Strategy in task list and Strategy based Maintenance Plan

    Dear Gurus,
    I have some doubt about
    is it same if we create a single cycle plan with a task list in which maintenance strategy let say A is being used and a maintenance plan strategy based let say A and task list without any strategy
    can some one explain use of strategy in task list and maintenance plan
    Regards
    Armaan

    Hi,
         In Strategy Based Plans :- When ur entering strategy in initial screen of IP42 then inside the plan system will allow u to select tasklists created with that strategy only ...
    In Single Cycle Plans :-  Here even though if u select tasklist of a particular strategy , system copies all the operations of the tasklist to the order...
    From your above example :- Single Cycle Plan if cycle is monthly is equal to strategy based plan having only 1Month package .
    further package in strategy allows u to select which operations of tasklist u want for 1Month..
    regrds
    pushpa

  • Plant Maintenance - Doubts in Task List Creation

    Hai,
    This is the first time that I am doing some configuration regaring Plant Maintenance Module.
    Scenario:
    There is an equipment which has a Plan for maintenance. Support there are 8 maintenance activities which have to be carried for that equipment in an year. Each of this activity will be carried out in different periods. Some of them will have to be done once in a year. Some may be done once in 6 months.
    But all the acitivities will not be carried out at the same time.
    Can anyone tell me how this can done?. Should we create separate Task Lists for all the 8 activities and subseqently create a Maintenance Plan for each of them or Create one single Task List which has all the 8 activities by giving Operation nos. In th second case how to create Maintenance Plan for each of the individual Line item in a Task List and how can it be linked.
    In the first case can a single Task list be incremented by a Group Counter which can have the individual operation so that a Maintenance Plan can be created for individual Task List incremented by a Group Counter.
    In both the cases can someone give me the procedure.
    Please throw some light on this subject.
    Regards,
    R. Vijayakumar

    Dear Vijaykumar,
    Jus follow the below steps..
    Step-1 
    T-code IP11, Create maintenance Startegy with all required frequencies like 1, 2 3 4 u2026 12 months
    Step-2
    In T-Code IA01, On general header view  screen .Enter the datas like Work center, usage, status. Select ur required Maintenance Strategy which u already created.
    GO to  operation tab , enter ur list of operations one by one (all 8 operations).
    Select all operations and click Mntpack icon on bottom of screen , On package overview screen u can able to select different operation at different frequencies jus tick box and save
    Step-3
    In T-Code IP42, select the maint strategy which u have assigned already and fill required details and select Task list which u have created in previous step (link is available in bottom screen) & Save.
    Step-4
    In T-Code IP10, schedule the  Maintenance Plan
    Now you will get the Maintenance orders automaticaly  based on package u defined and schedule date.
    Revert back me in case if u have any doubt on this cycle. Else close this thread.
    Regards,
    Gunak

  • What's the difference between task list release for order and release for c

    What's the difference between task list release for order and release for cost?

    Pallavi,
    The status of the task list determines in which other application areas the respective task list may be used.
    Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
    Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
    Regards,
    Usman

  • Integration between Custom list and task list

    Is it advisable to provide solutions for the integration between custom list and tasks list in SharePoint?
    I am working on a scenario where the data has to be segregated between multiple lists and there will be transactions among these lists using workflow. Some of the capabilities in Tasks list like due date notifications, calendar, tracking are needed
    on the transaction. Since these lists are based out of different content types, is it advisable to choose these lists for solutions?
    When we have to make few updates through workflow from custom list to tasks, will there be any problem in the transactions as it is two different content type?
    Vijayaragavan, MCTS

    Since SPLists and SharePoint workflows don't provide inherent
    support for transactions, you have to handle rollback operations yourself.
    The easiest way to simulate a transaction is to read in the state of any list item you are changing prior to executing an update, and then write that state back should you detect a failure. It's not a perfect solution, since a sufficiently severe error might
    prevent your rollback updates as well. That's the price you pay for not having the data store support transactions.
    That being said, while it's true many clients will ask for business critical data to be stored in SPLists, I would argue that it's your job to convince them that it's not a good idea, and that transactional databases accessed over webservices are a much safer
    SP compatible way to store important data - from
    stackoverflow
    [custom.development]

  • Extend task list for new planning plant

    Hi Gurus,
    I have 40 task lists for a planning plant 1000. I want to extend them for a new planning plant 2000. Is there any method to do it without usnig BDC or LSMW?
    Regards,
    VM

    Hello VM,
    No it is not possible to simply extend the Task list.
    You can copy the same for different planning plant. But if it is not so much necessary, Make other as Maintenance Plant rather than Planning plant.
    Regards
    Naveen

  • Task List and MIC

    Dear all,
    Can you pls clarify what is task list and how it is related to MIC.
    Regards
    Sougata Das.

    Hi,
           In SAP PM ->We use Tasklist for preventive maintenance purpose , it is where we record set of Tasks/ operations that we need to perform for maintenance activities , the set of operations can be as specified in Manfacturers manual
    MIC :- Master Inspection Characteristic we can link to operation in Tasklist
    For one Operaiton in tasklist we can have any number of MICs linked ..
    In PM :- We have Eqpt tasklist, Function location tasklist , General tasklist
    Thus this Tasklist is used in Maintenance Plan with calibraiton order type PM06 , On scheduling in IP10 Order gets created with Tasklist operations , one releasing the Calibration order ->Inspection Lot gets created and MIC mentioned in tasklist ..
    Tasklist -->http://help.sap.com/saphelp_47x200/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
    Check Tasklist in the link
    MIC -->http://help.sap.com/saphelp_40b/helpdata/en/2d/3509d8448c11d189420000e829fbbd/content.htm
    regards
    pushpa

  • Inspection lot not updated with Task list and sample

    Hi,
    I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found'
    When i create an inspection lot system is picking up the Task list and picking up the Sample size.
    Please provide some light on this.

    Hello Kumar,
    Check each and every point given in below document and come up with your observations.
    I presume Inspection lot status consists CRTD.
    Inspection lots with CRTD status- Causes and Remedies - Product Lifecycle Management - SCN Wiki
    Amol.

  • What is difference between interactive list and interactive reports?

    what is difference between interactive list and interactive reports?

    hi check this..
    interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
    report .
    start-of-selection.
    write:/ 'this is the source list'.
    at line-selection .
    if sy-lsind = 1 .
    write:/ ' this is the 1st list'.
    elseif.
    if sy-lsind = 2 .
    write:/ ' this is the 2 list'.
    if sy-lsind = 3 .
    write:/ ' this is the 3 list'.
    if sy-lsind = 4 .
    write:/ ' this is the 4 list'.
    if sy-lsind = 5 .
    write:/ ' this is the 5 list'.
    if sy-lsind = 6 .
    write:/ ' this is the 6 list'.
    if sy-lsind = 7 .
    write:/ ' this is the 7 list'.
    if sy-lsind = 8.
    write:/ ' this is the 8 list'.
    if sy-lsind = 9 .
    write:/ ' this is the 9 list'.
    if sy-lsind = 10 .
    write:/ ' this is the 10 list'.
    endif.
    regards,
    venkat

  • What is difference between SharePoint List and Libraries

    What is difference between SharePoint List and Libraries

    Hello,
    You also might want to loot at here:
    http://veroniquepalmer.com/2013/02/24/the-difference-between-sharepoint-2010-lists-libraries-and-pages/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d4152cd-92a6-4eed-9a52-a519ec71c674/what-is-the-difference-between-document-library-and-list-in-sharepoint
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
    https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • Difference between task request and change request

    What is the difference between task request and change request during sap implementation. In general how many tasks will generate during a normal company inmplementation by any functional consultant?

    Hi,
    Change request and task request are same.But generally change request is generated during newly created objects or reports that are transported and task request is used when u regenerate the change request by modifying that object again and transporting it in new change request.
    A particular change request may contain multiple number of task request but that number depends upon number of objects u transfer during generation and transportation.
    Pls do reward points if ans is useful.
    Regards,
    Suhas.

  • Need technically the linkage between Shopping Card and PO (SRM).....

    Hi SAP Gurus,
    I am using SAP SRM 7.0 and wanted to find out:
    1) Technically the linkage between Shopping Card and PO (SRM). (Basically looking for required table names and the fields)
    2) Technically the linkage between Shopping Card and Reservation (SRM) . (looking for required table names and the fields)
    Thanks....

    Hi Siobhan
    thanks. but every customer wants to know what happened to his cart if the status is COMPLETED or not. Why SAP missed this small piece of functionality to show COMPLETED status via WEb transaction. I can see only this via REDISTRIBUTION WORKLOAD transcation status. right hand side green tick mark. this green mark totally mislead every body. mixuter of status shows green tick mark (COMPLETED + FOLLOW ON DOCUMENT CREATED etc) in redistribution mark.
    Appreciate your reply .
    I tell you in detail .
    for ex CART went to ERROR IN PROCESS but no where the requestor can see his cart and he got dismayed and admin can see his cart . ok. if i go see in redistribution menu it shows COMPLETED logo. it mislead whole business.
    Muthu

  • Differences between ABAP lists and ALV lists

    what is the differences between ABAP lists and ALV lists?
    Edited by: pong pong on Apr 9, 2008 5:08 AM

    Hello Pong Pong,
    Please go thru help topics:
    ALV Grid
    http://help.sap.com/saphelp_47x200/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
    ABAP Lists
    http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb408a455611d189710000e8322d00/frameset.htm
    Regards,
    Siddhesh

  • Hi In TB how can I delete or disable the wide pane between the list and message pane?

    Hi
    In Tb 24.6.0 how can I delete or disable the wide pane between the list and message pane?
    Thank you.

    You cannot delete it. It is part of the message pane.
    You can make it smaller with this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/compactheader/?src=ss

Maybe you are looking for

  • NGenerate Original and Duplicated Invoice

    Hy. I have one issue. My customer when print a invoice it want to print the original and duplicated. Someone have an ideia how i can do this. For Each Invoice Print it print's a copy of this invoice. My Ideia is create one variable y/n to gives optio

  • Do I really need ME SDK 3.0

    1. I want to create only mobile apps, and not Blue Ray or other appliances. I have Netbeans, to which I want to integrate this too. Why is ME SDK 3.0 then the replacement of CLDC 2.5.2? 2. The CLDC 2.5.2 is 37mb, while ME SDK 3.0 is 117mb. Why is all

  • Wrong opening balance in RG23A 2

    Hi Experts I used the report J2I9 and in April Closing of BED Cenvat was suppose Rs 100.00. But when I run this J2I9 report for May month, opening of BED Cenvat is Rs 70.00. I want to know where is this Rs 30.00. How I can check it. All other credit

  • How do you turn off select whole word function?

    Massively annoying, trying to start an edit on a student paper, say, by selecting part of a word or just the period at the end of a sentence but then having to re-write the whole word, add punctuation back in, and then do your editing.  We've been do

  • Uhmmm what happened to the Sneak Preview Full Edition with Java AddIn?

    Anyone knows if the anouncement of the new Full ABAP edition 2004s is also the silent dead of the Full edition with Java stack add-in? It has mysteriously disappeared from the page...