Plant Switzerland -- Shipping point Germany

Hello SAP masters!
We have our plant in Switzerland and some shipping points to this plant in Germany.
Is this with SAP possible?
Or we need for the shipping points in Germany a separte plant also in Germany?
Thanks for your held?
Best wishes
Petra Schober

Technically there is no problem to make this happen, even the shipping point has its own adress which is different from the plant adress. But technically these are just numbers that get assigned to each other.
From a logistics point of view, I see already an inconsistency.
If the plant is in Switzerland, how can you ship then from Germany?
You have to get the materials to Germany first to be physically able to ship from there. Of course you can set up a storage location to your Swiss plant that is located in Germany.
Germany is in EU, Switzerland not, so you might get bigger issues with necessary legal reporting to tax authorities as well as statistical offices (Intrastat report) with this setup.
Best you meet with Finance guys to talk about requirement and setup.

Similar Messages

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • Cant Assign Plant to Shipping Point

    Dear Gurus,
    I've defined my Plant then later defined my shipping points. When it came to OVXC I could not see my plant so therefore I could not assign my shipping points to it. What is the reason for this .. did I miss a step? Thanks in advance.
    Best Regards,
    Jin

    go to define plant and see whether ur plant is appearing there and whether u have maintained the address for the plant, if yes check whether u have maintained these things:
    1.define sales org.
    2.defien division
    3.define sales office.
    4.define shipping point.(check if u have maintained the address for the shipping point)
    5.assign sales org. to company code
    6.assign distribution channel to sales org.
    7.assign division to sales org.
    8.set up sales area
    9.assign sales office to sales area
    10.assign sales org, dist.channel to plant
    11assign shipping point to plant

  • Plant and shipping point have no connection but still order got created.

    Hi All,
    An order was created and subsequenty delivered and invoiced. Later on the goods were returned.
    The problem which occured is that the return order have plant A  and shipping point B, which are in no way connected to each other. There is no configuration done to attach this two, still the order got created.
    I wanted to know even if plant and shipping point is different, can a order be created and saved.
    Please giude me.
    Regards,
    Satish.

    yes Satish
    this is possible, take a scenario, suppose one company is having 3 plants A,B,C with shipping point A1,B1,AND C1 respectively. But the requirement is such that they will collect the material from plant A and deliver it form B1 shiiping point which is linked with plant B.
    so it is possible to create and save order if plant and shipping point is different.
    bye

  • Plant and Shipping point assignment

    Dear All,
    As a standard process we have copied the plants and shipping points in the development client and i have deleted the default shipping point and assigned the newly defined shipping point.I have forgotten to assign one plant and shipping point and i have even deleted the default shipping point.Now i have to assign the plant x to the shipping point x where i am not able to find the plant in the  ovxc screen.Is there any way to find the missing plant or i have to delete all the assignments and reassign again.
    Help required as early as possible.
    Thanks in advance,
    Ramesh.

    1)  Check in OX10 whether you could see that plant
    2)  Check in OVXD whether you could see that shipping point
    If the answer to both is yes, then you should be able to see in OVXC also.  If not, better try to delete in the above areas also, recreate and then check in OVXC
    thanks
    G. Lakshmipathi

  • Relation between plant and shipping point

    Hi all,
    my simple question is,  what is the relation between plant and shipping point ?
    in book i read, it is                      many to many,
    but in some web link it is showing 1 to many
    what is the logic behind these two ans.
    pls tell me the ans...
    Regards
    Avinash

    Hi Hegal . K . Charles,
    it is correct,  as we discussed above it may be MANY to MANY .
    Suppose, we hv 2 plant 1 in delhi and 2nd in nagpur. and this company want to export via inland water ways, in this case we can assign mumbai port to delhi and nagpur plant as well.
    as you said it is correct, It is just  not to overload the master data maintenance 
    Ex- In case of Sales Org. Its is always advisable to keep it minimum to per company code. Because master data records are multiplied by each additional org. element.

  • Available plants & redetermine shipping point

    Hi experts, i have two problems. First, i will describe the situation and then the problem.
    in our system , we maintain delivery plant field into customer master. From this reason, when i create a sales order, SAP copy this plant as default value in sales order.
    Let's assume that we make a sales order for customer 10 which has plant P1 as default delivery plant.   And material M1 with following available stock:
    - in M1 plant 0 qty
    - in M2 plant 10 qty.
    First problem:
    In this case , when i create a sales order, SAP will propose automatically P1 as delivering plant, but in P1 there are no stock (0 qty). Is there any way to propose automatically another plant  when in proposed plant there are no available stock ?
    Second problem:
    In our system we have some generic materials which always will be delivered and shipped from one plant. So, let's assume that this plant is P1. If a customer has default plant P2, then in sales order will copy default plant from customer master. I solve this problem from a user exit (userexit_move_field_to_vbap) -- i make some modifications-- but the real problem is that, when i do this forced change, shipping point is not redetermined. 
    Is there any way to redetermine shipping point in this case (forced change of delivery plant) ?
    I give you an example:
    -customer 10, default plant P1
    -material MG01 (this material should always deliver from plant X1, shipping point X1)
    - two shippping points: P1 and X1
    When i create the sales order, SAP propose automatically P1 as default plant...but in background, in user exit userexit_move_field_to_vbap i have some modifications: if material is MG01 then plant would be X1. But , in this case, shipping point will be determined based on old plant (P1) not based on new forced change plant (X1) so shipping point will be P1 instead of X1. So, is there any way to redetermne shipping point ?
    Thanks in advance.

    Hi,
    Is there any way to propose automatically another plant when in proposed plant there are no available stock
    As fara s my understanding there is no automatic replacement of plant.you can do it manually
    For determining shipping point as you used userexit for plant as like this you can force to change shipping point.
    Kapil

  • Plant and shipping point is determined at Header or item level?

    Hi,
    Shipping point is determined at Header level or item level of Sales order?
    How about Plant??
    Thanks!!

    Both Shipping point & Plant are determined for each Item in the Sales order automatically by the system.
    For determining Plant, system first search the CMIR,
    if not found the Plant there or CMIR is maintained then system searches Customer master of the SH, i
    f here also not found then system sarches the Material master.
    This is called Priority rule which is hard coded in SAP and can be changed by customisation.
    For determining Shipping point, system takes three fields into consideration, they are
    1. Shipping condition (first check Sales doc type , if not found then takes from Customer master of SP)
    2. Loading group ( material master> sales org group 2)
    3. Delivering Plant
    So, they are (Shipping point & Plant ) item specific data in sales order.

  • Org structure quiries - about sales org to plant assignment &shipping point

    Dear All,
    My client is asking why the assignment of single sales organization with respect to all plants, why not separate sales organization for each plant?. But here we configured the single sales organization since a single sales department is there. How to convince the same to them effectively?
    What is the significance of shipping point (to give an explanation to client) - my client is asking is shipping point is same as plant?
    how do i convince them with the best possible answer
    regards,
    Archu

    hi archana
    My client is asking why the assignment of single sales organization with respect to all plants, why not separate sales organization for each plant?. But here we configured the single sales organization since a single sales department is there. How to convince the same to them effectively?
    if you have more sales organisations,One distribution channel and three divisions. the no of sales ares willl be more
    we have three sales organisations,One distribution channel and three divisions.
    Nine sales ares we have
    If you have more sales organizations then the master data will be more. so keeping sales organization to minimum will help to maintain master data easily
    Possible reasons for having more than one sales organization for each company code:
    · Different legal responsibilities, for example product liability
    · Unusual stipulations (for example legal), which make it necessary to distribute different product lines separately u2013 for example, products for medicine and veterinary medicine
    · The desire to separate completely the sales activities of different enterprise areas
    Separate distribution responsibilities, each with their own Marketing and Pricing policy u2013 for example, one for the domestic market and one for export
    Overlapping customer and product master records or the desire to maintain customer and product master data in a specific, unusual way
    · Overlapping responsibilities for order entry, or for sales and distribution processing (sales authorizations)

  • Shipping point and Plant in CRM 4.0

    Hi experts,
    Where do i find Plant and Shipping point in CRM Sales transaction? of CRM 4.0 version.
    Thanks in advance.
    Regards,
    DV.

    Hi DV,
    For sales order exchange scenarios please check the following notes:
    541113 - Data exchange scenarios for orders (CRM-R/3)
    511074 - Change of CRM documents in R/3 Backend System, part 1
    520045 - Change of CRM documents in the R/3 Backend System, part 2
    705200 - Data exchange - Scenario X, Y and Z (old version)
    889051 - Scenario A: Overview and settings (new version of 705200)
    620139 - Scenario A: Interdependent changes in sales documents - R/3
    Kind regards,
    KZ

  • Assign Shipping Point to Plant

    Hello Everybody,
    I Created a plant and shipping point in IMG config. However, when I tried to assign the shipping point to the plant via OVXC I couldn't find the plant. Did i miss something?
    Please help.
    Thanks,
    Sirisha Matta

    Hi,
    You also need to assign the plant to the sales area & distribution channel. After making those settings, you will be able to assign a shipping point.
    MdZ

  • Relation between Sales org and Shipping Point

    Hai all,
           Can any one tell me wt is the relation between Sales Org and Shipping point?
    Ravi
    < PLEASE DONT USE SMS LANGUAGE AND PLEASE SEARCH THE FORUMS.  >

    Hi Ravi,
    There is no direct relation.
    Sales organisation in broader level, it is responsible for selling a product in a company.
    It is liable to the customer interms of service of the product or service and confirmation of the sale order, delivery and invoicing.
    Shipping Point is a logical point from where the shipment / dispatch begins.
    Both Sales organisation & Shipping point wil be linked to plant (one or more).
    In case of sale order, sales org will decide the delivering plant.
    Shipping point will be picked based on delivery plant, sh.conditions (cmr) & loading grp (mmr).
    hope this is clear to you now!

  • Missing shipping point/receiving pt

    Hello,
    I have a problem with shipping determination. I have created my shipping conditions assigned in customer record, assigned loading grp in material record, did customizations like sales doc type/shipping condition, replaced LF with my delivery type, config SC- Loading grp-plant-proposed shipping point.  But when i create Sales order and item, shipping tab does not automatically show 'shipping point'. Basically, it is not getting determined? Any ideas, clues. When I give manually the shipping point, the error message is
    "Ship.condition 01 loading grp Z001 plant ZVK StLoc  not defined" but my delv type is custom one and assigned in sales order and also my SC is assigned to Sales order type in IMG. What is the problem?
    Please help. Points will be awarded.
    Thanks
    Venky

    Hello Guys,
    Thank you all for the help. I have verified and i had done all that. I am still having problem.When I go to incompletion log:
    I get 'Missing Shipping point/receving pt' and all the fields are blank except plant(ZVK), delivery priority ('1'), max part delv('9'), order combination
    (checked), net weight, gross weight. Anything to do with unloading point, receiving point, route, shipping type that i need to configure or any background job to run to update?
    My Shipping data:
    Plant: ZVK
    Shipping Cond: Z8
    Loading grp: Z001
    Shipping point : ZVK1
    sale doc typ : ZA99
    delivery type : ZLFV
    delivery item cat : ZVKN
    storage loc: ZKV
    I have
    1) Defined  Shipping Point in Enterprise Struct: ZVK1
    2) Assigned shipping point to plant in enterprise :
       ZVK (plnt) -- ZVK1(sp)
    3) defined shipping conditions: Z8 (thru shipping point and goods receiving detr)
    4) assigned shipping condition to sales type:
       ZA99- Z8
    5) defined loading grp : Z001
    6) did shipping point determination 
       Z8(SC) -- Z001(lgrp) -- ZVK(plnt) -- ZVK1(prshp)
    7) defined delv typ: ZLFV
    8) defined delv item cat : ZVKN
    9) did item cat determintaiton
       ZLFV (del) typ) -- ZVKN (item cat)CHSP (usage) ZVKN (Item cat)
    10) in my sales doc type : i have assigned delivery type ( ZLFV) in Shipping section.
    11) ASSIGNED storage loc to plant and warehouse in Enterprise: ZKVZvk001. But in the error message i do not see the Stloc populated. is it any clue?
    Please help.
    Thank you,
    Venky

  • How to get the shipping point details nothing but (name , address, etc)

    Hi, i am having the billing document number from that i am fetching the delivery doc number and shipping point.
    how i can get the shipping point details from the shipping point number.in which table i  need to pass this shipping point number(VSTEL)?

    Hi Praveen,
    TVST Shipping point
    KNVS Customer Master Shipping Data
    VTTK Shipment header
    VTTP Shipment item
    VTFA Flow shipping documents
    TVSTZ Organizational Unit: Shipping Points per Plant
    B024 Shipping point
    TVSRO Shipping points: Countries in Which Routes are Defined
    TVSWZ Shipping Points per Plant
    You can get the details from ADRC table. Please note that the TVST table has got a field ADRNR, pls use the same field in identifying the number and goto ADRC table enter the number under the ADDRNUMBER. It will fetch the address details for you.
    For ex from the standard SAP: I have taken std 0001 shipping pt. When I run TVST table for shipping points I get to see that ADRNR field has 297 as the number. I take the same number 297 and goto ADRC table and enter it under ADDRNUMBER and it will give me the address details entered for shipping pt 0001.
                                                              (or)
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    Shipping point -> Deliveries / Returns
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Reward if helpful,
    Regards,
    Harini.S

  • Assigning Printers to Specific Shipping Points

    Hi,
    Our system has multiple Sales Organisations, within each - one plant/warehouse/shipping point.
    I have added additional plants to a few of these sales orgs, along with the relative warehouse and shipping point.
    Sales users now have the option of selecting a plant when in a sales order - depending on stock availability at each. We successfully have multiple deliveries generating for differnt plants, under 1 sales order.
    However:
    I don't know how to assign a separate printer device to each shipping point/plant. The plants are separate warehouse locations therefore it needs to be automatic.
    I've tried VP01SHP, however all 60 shipping points that alreeady existed showed the same data, there must be somewhere else that defines them to a separate device?
    Any help greatly appreciated.
    Dan

    Go through this IMG path to find the settings about LD00 output type (as shipping point related data will be maintain in appl V2).
    SPRO path
    IMG - LE - Shipping - Basic Shipping Functions - Output Control - Output Determination - Maintain Output Determination for Outbound Deliveries - Maintain Output Types, here you can find the LD00 Output type.
    For more settings go through this IMG steps
    -Maintain Condition Tables, 21-DlvType/Shipping Point
    -Maintain Output Types, LD00 (Std Access sequence 0005-SalesOrg/Customer), so, to modify create Z Output type by copying LD00 and .
    -Maintain Access Sequences, try 0010-DlvType/Shipping Point
    -Maintain Output Determination Procedure, V10000-Header Output
    -Assign Output Determination Procedures
    Hope this can assist you in understanding or refer [output determination|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=outputdeterminationusingconditiontechnique&decorator=printable] for the same.
    Thanks & Regards
    JP

Maybe you are looking for