Play list on Blackberry 9300 will only play one song at a time since update to Desktop version 6

Since upgrading to version 6, my backberry 9300 won't play any more than one song at a time (unless you manually forward it to the next song), even when using a playlist.
I have tried every combination of shuffle/repeat and still no luck. Vodafone technical people cannot help either!
Please advise how I can get my blackberry curve 9300 to play the whole list OR an entire album without me having to advance every single song?

Hi
The obvious conclusion to reach is that this is a result of the upgrade to OS 6 and that to get back the facility you've lost would be achieved by going back to the old OS.
I do not have access to OS 6 so I cannot be specific, but it may be worth trying a different media app before any other action.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Similar Messages

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want it?

iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: Woildbill

I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!

Slideshow will only export one song

If I add more than one song to a slideshow created in iphoto, when the slideshow is exported to idvd to put the show on disc it only exports one song...
When you play the slideshow back in iphoto it plays both songs...Any way round this?
Mac OS X (10.4.5)
Mac OS X (10.4.5)

Hi kernowman,
Here are the work-arounds:
Only one song exporting with Slideshows
Right now, this seems to be a know problem/bug. There have been some work-arounds. Don't know if the problem is with iPhoto, Quicktime or a combo of both.
-From Bob Worthington: re-ripping the cuts I wanted as background music for the DVD as a single cut in iTunes. I then made a playlist containing the one extended cut of music.
-Old Toad: share to Quicktime from iPhoto and then import the resulting movie into iMovie you can extract and delete the audio from the video and add the two songs to the video and save.
Quicktime Pro-open the movie and bring up the Movie Properties menu window. In the top window select the audio track and delete it.
If you want more than one song you'll have to join them together with iMovie or some other application. Then open that joined file with QT Player. Then do a select all and copy. Now go to the QT window of the movie and select the Edit->Add to Movie menu option. You don't want to scale it because it will change the play speed of the audio unless it's time is exactly the same as the movie.
You could go the other way, open the movie, select all and copy, and then past with scaling to the audio. That will change the speed of the movie and transitions to fit the audio track. In this case the resulting video file will have the name of the audio track file that you started with.
You may have to play with it a bit to get exactly what you want. Be sure to work with copies of all the media files for the project.
-Peter Burtwistle: I opened the Qt movie that iPhoto makes when you export to iDVD and removed the sound track.
Then made a new soundtrack by opening all three songs in QT, then cutting and pasting them together.
Finally use QT Pro's 'Add to Movie" option to add the soundtrack to the original movie.
This worked well and was fast to do too.
-Joe Lombardo: I ended up having to extend the songs by 20 seconds so I brought them all into GarageBand and made some edits. Then I exported them all to iTunes as a single track and used that for the slideshow
From scotty321 at MacOSXHints.com: If you have Roxio Toast Titanium installed on your machine, you can join unprotected tracks yourself by simulating a disc burn. Simply take these steps:
Go to the Audio tab in Toast.
Drag your audio files from iTunes into Toast.
Reshuffle them in the proper order within Toast.
Go up to File: Save As Disc Image. Save your disc image somewhere on your Desktop.
Choose Utilities: Mount Disc Image. The CD will mount on your desktop, and iTunes will think that you just inserted a CD.
Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
Go through the import process, and you've got a joined track! Simply rename the track to whatever you want to call it, and you're good to go.
From Lori...
Burn the playlist in iTunes.
Make sure you have itunes Prefs just open the Cd and not automatically play or import the songs.
Insert the burned CD and iTunes will open.
Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
Go to Advanced>convert selection to AAC.
When done, make a new playlist named after the slideshow.
Put the new combined track into the playlist.
In iPhoto, select this playlist for your slideshow.

Appleworks will only print one page at a time, please help!

hi there ~
no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
Could this be because the pages are arranged left to right? that would seem strange.
also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
THANKS SO MUCH!

Hi td,
Welcome to AppleDiscussions and the AppleWorks forum.
"no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
My memory says the same as Yvan's.
If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
regards,
Barry

Ipod will only Copy 3 songs at a time

After the upgrade to firmware 1.2.2 and iTunes 7.5, my iPod has been somewhat, how should I say, unusable. After 10 restores, trying out 5 usb ports on 2 PC's, 2 cables, a Windows Check Disk, a Command Prompt Check Disk and restoring my firmware back to 1.2.1, I have finally gotten the iPod to show up on my PC and store music. However, it will not sync. I have tried to copy the songs over manually, but I can only do 3 at a time. If I try to do more than 3, I get error (Unknown Error [-69]).
There's no problems with actual song files because when I get this error I can then (individually) move over that very song it just failed on with no problems. So, it seems that I can't move more than 3 songs at a time. I have 11,000 songs to move over. Since the upgrade problems and subsequent restore wiped out my iPod, this would be an extremely tedious problem. Could it be the port on my iPod itself?
The Apple store is far from me and you have to make an appt way in advance. It's usually a nut-house in there. They told me to buy a new one. I couldn't believe my ears!!!! It's only 1 1/2 years old, and yes, out of warranty of course. Any help would be greatly appreciated. Thanks in advance.
Win XP SP2 is running with all updates and I did try to reinstall/update all of my USB port drivers.

I forgot to add that I am currently running iTunes 6 (which was on the disc that the iPod came with) after completely uninstalling iTunes, Quicktime, iApple Mobile and Apple Software installs from Add/Remove Programs. I even use Windows Cleanup Utility to clean up the registry, but wasn't needed.
I'm a tech and I've put in at least 8 hours of time just to get to this point. And to think I blatantly announced to all of my PC tech buddies that this is the last PC I was going to own. I was intending to go all MAC from this point forward, but now I am not quite sure.

Can only import one song at a time

So I just updated to Itunes 7.0. And I used to be able to upload a bunch of songs at a time to my Library. Now it only allows me to do it one at a time. I've tried to do 3 or 4 but then nothing shows up in my Library!
HELP

i also have the same problem.. it's so annoying!
i haven't yet found out why this is happening.. but i have found a way to start adding lots of songs at one time..
in my case, i am adding from my music folders in my C drive.. so i open the folder using 'my computer' and select all the music i want by holding the Ctrl key.. then i make the music folder window smaller and then put my itunes page back up.
while the music folder window is showing on top of the itunes window page, i press control again and click on one of the highlighted songs (which then picks up all the others i have highlighted) and drag them on top of the word LIBRARY (not MUSIC) until it lights up, this then adds my big group of songs to my library in itunes, then i just right click on my ipod section and press sync.
i have a new ipod 30gb and am using the new itunes 7
i never had this problem with my old ipod mini or the itunes version that came with that
hope this helps

Encore CS5 will Only Burn One DVD At A Time

Hello All , I am having a problem that I didn't have with CS4 ,If I set CS5 to burn more than one DVD it shows a hardware error after the first one , If I set CS5 to burn one DVD it works every time I only burn at 8X .This is not a major problem because it doesn't take much longer to burn them one at a time
but it would be nice to know why .
Regards
Kevin

Thank's for your suggestion but I have always set CS4 to burn say 10 DVDs and just change the media when prompted (only 10 days ago) in CS5 this doesn't work only the first one will burn , I am sure there is nothing wrong with my hardware is works flawlessly with all other software.

Reconnect Media - Will only do one file at a time. (all files is checked)

I found one Google search that said this may be a bug... http://forums.creativecow.net/thread/8/1047891 and it's really bothering me since I have about 500 more media files to connect.
When I select multiple files in my Project File Browser, right click, hit Reconnect Media... It opens the Reconnect Files window. Then I hit "Locate", navigate to the folder holding the files (Reconnect All files in Relative Path is checked), select the file, confirm, then hit connect... Only one file (the first one selected) reconnects.
It's worse than that for me, now the file is Connected in my Project File browser, but it still doesn't reconnect in my sequences. So now I have to go in the sequence and right click on the individual clips, and manually reconnect those as well.
At this point it take 6 plus clicks per file missing, times two because I have to reconnect these clips in the sequences as well... times 500 because that's how many offline files I have.
My lord, I've already done this to half of the project, I can't do it any more... where am I going wrong or is this a bug? If so, please tell me there is a workaround.
The file I'm working in is a feature film, so it's huge... I can't start over at this point.
Thanks for your time!
-Monty

The only multiple files it will reconnect are the ones that are already connected.
I hope I figured it out but need more advice. It may be that the files that won't connect do not have a visible file extension ".mov". How can I get these files to shoe ".mov" at the end of their names without manually renaming them all?
And the reason this is happening is I was using reference files to edit a movie, now I've been given new hard drives with the final uncompressed footage but same file names for each clip... plus the new hard drives I'm using have different names.
Thanks for your time!
-Monty

Excel will only print one page at a time

At work, we use Excel to track orders. I have a multi-page workbook that has linked pages. Last week, I could print fine, but this week I am only able to print the last page of a sheet. I saw in another forum: http://discussions.apple.com/thread.jspa?messageID=696138 person who had a similar problem, but only when trying to print to a PDF. I am able to preview and print to a PDF without problems. I have updated my OS and printer drivers, and installed all available updates to Office (I’m using version X). I think it is pertinent to note that no one else in my office is able to print these documents normally.
Can anyone think of a solution short of completely rebuilding the workbook? In the past, saving the file as an Excel v.4 workbook and then reconverting it to the more current file solved the problem, but now if I try to do that, excel crashes.
Thanks!

Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
At any rate, best of luck to you!

Ipod will only load 12 songs at a time

I had to reset my ipod. I'm now trying to reload my songs off of Itunes, but I can only losd about 12 songs at a tie then i have to manually eject Ipod, soft reset and then start losding again. How can i make this stop? Please help

I forgot to add that I am currently running iTunes 6 (which was on the disc that the iPod came with) after completely uninstalling iTunes, Quicktime, iApple Mobile and Apple Software installs from Add/Remove Programs. I even use Windows Cleanup Utility to clean up the registry, but wasn't needed.
I'm a tech and I've put in at least 8 hours of time just to get to this point. And to think I blatantly announced to all of my PC tech buddies that this is the last PC I was going to own. I was intending to go all MAC from this point forward, but now I am not quite sure.

How do I purchase more than one song at a time from my wish list . It seems like i can only buy one song at a time and i want to buy several at one time .

Another step backwards for iTunes.
What is Apple thinking?
I have 50 songs to purchase and I have to stumble through each one individually?
Seriously?

HP LaserJet 2035n printer will only print one page at a time

Recently I have installed the HP LaserJet P2035n with Windows XP. While taking printouts, its not printing more than one page. Already I have checked PCL setting for Manual feed as OFF and paper settings as A4. Pls help.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can you only download one song at a time or is there a way to select an artist or playlist?

Foolish me, I loaded EVERYTHING I own onto my iTunes library - about 40 gig. Problem is I have a 32 gig iPad (v1 - don't laugh, it still works fine). Now I need to be selective in loading music only it. I travel a lot on airplanes and want my iPad for music and movies.
From what I can see, you are only offered the download icon next to individual songs, not on playlists or artist's names.
One other thing for you experts, is it possible on the iPad to see playlists and artist configuration as a list, rather than icons? I am much better at organizing via lists than icons.

You should see a Download All icon at the bottom of your playlists, and also see a download icon to the right of the Artist name at the top.
AFIK you cannot view Artists or Playlists as lists on an iPad.

HT201359 My MasterCard bill for my iTunes song purchases are always moreo than what I bought. I only buy one song at a time or buy new levels for candy crush at .99 or 1.29 for songs, but there are times when my mc bill shows iTunes bought for 7.39 or 6.2

I use iTunes for songs and to buy more levels on candy crush. My bill is to MasterCard, but each month my iTunes is for more than what I think I purchased. I recently had to change my mc number. It was a new number so I changed it on my account. When I buy a song I get an email but sometimes my bill shows for more than .99 or 1.29, it might show for 7.00 or more and when I call the number on the iTunes account I can never speak to an actual person. What should I do?

Sometimes iTunes clumps bills together... look inside the email to see if there is a list of what you purchased. If you notice when you make a purchase it never comes out right away.. .its sometimes a week later before it comes out or you get an email. If during that week you purchased other items itunes may bill those together.

Play list on Blackberry 9300 will only play one song at a time since update to Desktop version 6

Similar Messages

Maybe you are looking for