Playback pauses when the window loses focus.  Can I fix that?

When going through footage, I might be multitasking -- talking on chat, looking at to do lists, etc.  Whenever I tab away to some other application, playback pauses in Adobe Premiere Elements 13.  This is really annoying -- any way to turn that off?

JustinPierce
Your type of situation has been written about before and remains the same up to and including the current version 13.
What you describe is what it is. There is no way to change that behavior. The Premiere Elements playback in progress stops when you
switch to another application. No user turn off switch to prevent this from happening.
ATR

Similar Messages

  • My computer with Windows 7 says there is no iPod when I run diagnostics on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    My computer with Windows 7 says there is no iPod when I run Device Sync diagnostic test on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    Hi there JMW1973,
    You may find the troubleshooting steps in the article below helpful.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    -Griff W. 

  • I transfered data from my old Mac, but now it tells me "No Access" when I try to open the files. How can I fix that?

    I transfered data from my old Mac, but now it tells me "No Access" when I try to open the files. How can I fix that?

    That's the problem, then. The files are under your 'old' user account. You should be able to access them if you log into your old account. However, that's not going to let you move them to your new user account. It's for situations like this that I always create a root user account (although I seldom access it). With a root user account, you can copy files from one user account to another. Note that someone may come up with a better idea than what I would use, but here goes.
    Read http://support.apple.com/kb/ht1528 and set up a root user. Then you can transfer files from one account to another. If you like, you can delete this account after you've moved your files.
    Good luck,
    Clinton

  • If i export my project, it runs much faster than in the canvas. How can I fix that?

    If i export my project, it runs much faster than in the canvas. How can I fix that?
    I'm from germany, sorry for my english!

    When you export your project, it is "compiled" into video format. Any player will play it at its frame rate.
    Motion is a compositing application. It has to make many more times the calculations needed to animate everything and 90% of the time, it's just not possible for Motion to keep up with "real time".  It's to be expected. Learning to live with that fact will make life a lot easier for you, I promise.
    There are a few things you can do to help speed up Motion:
    Reduce temporary play ranges to no more than about 5 seconds at a time. You can move the Play Range In and Out markers from section to section. Motion does all of its real time rendering in RAM. The longer the play range, to more it has to work managing that memory.
    Remove Preview Icons from the Layers list ( View menu > Layers Columns > Preview will toggle the views)
    When you play your animation, turn off on screen guides: (command - / will toggle onscreen guides)
    In Motion 5, reducing the quality of playback from the Render menu does not make a lot of difference anymore, so you might as well keep the default settings of Dynamic, Full and Normal on. However, Motion Blur, Frame Blending, Field Rendering, as well as the lighting options will affect playback, sometimes by quite a lot. So if you have Lights, turning off Lighting, Shadows, and Reflections will get back a lot of real time playback speed (just remember to turn on all that you need before rendering, or these things will be left out of the export!)
    HTH

  • I need to execute a formatted search when the field loses focus

    Is this even possible?  I do NOT want to force the users to press shift-f2 every time to validate/search on every field on the form.  This is absurd.  How can I trigger a formatted search on a field when it loses focus?
    I tried activating menu item #7425, but it's not executing the one on the field that loses focus, but a different one.  I guess it only works on the active field??
    I tried catching an earlier event, but after it executes the formatted search on the right field, it places the value on whatever field just gained focus instead of the one it was assigned to.
    Any ideas here?  We cannot force our users to press shift-f2 on all these fields!
    The only other idea I have is to not use a formatted search but instead try to create some sort of popup form with a grid and my own query.  There has to be an easier way, right?

    Bryan:
    I use the following on a KeyDown event for when the User tabs out of a field after entering data if the data they entered is not valid.  Perhaps you could try this in the LostFocus event:
    g_B1Connection.Application.SendKeys("+")
    Also, I have used this in the KeyDown event:
    DisplayLookup("txtWO0")
    Private Sub DisplayLookup(ByVal objText As String)
            Try
                WOItem = WOForm.Items.Item(objText)
                WOItem.Click(SAPbouiCOM.BoCellClickType.ct_Regular)
                g_B1Connection.Application.SendKeys("+")
            Catch ex As Exception
                g_B1Connection.Application.MessageBox(ex.Message, "Ok", 1)
            End Try
        End Sub
    Thanks,
    EJD

  • I cannot save any changes made in the Preferences box. I go to Edit, then Preferences. When the window opens, I can check or uncheck boxes in the General window BUT, there are no Cancel or OK buttons at the bottom of the window. HELP!!

    There are no "Cancel" or "OK" buttons at the botton of my "Preferences" box that allow me save any changes that I might mak in the "General" window.  The box opens without problem and changes can be made in the "General" window however, these changes cannot be saved.  If I close the window with the "X" in the upper right hand corner and then reopen it, any changes made are lost.  I'm running Windows XP and would appreciate any help that I can get.

    I would like to change the "When you insert a CD:" option
    Oh good, that one's pretty straightforward. When you make that change in the pane, the OK is the active button. For example, I just quickly changed mine to "Import CD and Eject", and you can see that the OK button is blue in my screenshot:
    ... so to make that setting stick, all you need to do is to hit your "Enter" key, and that should press the OK.
    Unfortunately, I don't have any music in the iTunes library on the PC I'm working from at the moment. So I can't check my "Automatically download album artwork" checkbox.
    Ed, could you check for us which item is active after changing that setting? (If it's the OK button, then hitting enter should press the invisible button, just like "When you insert a CD".)
    Changing "Import Settings" is trickier, because after you get out of the "Import Settings" subdialog, the "Import Settings" button is active. So you then have to hit the tab key precisely five times (to get OK active again) and then hit Enter to get Import Settings changes to stick.

  • How to keep the highlight when the JTextComponent lose focus?

    I wanted to do some basic copy/cut/paste on the JTextPane from the Menu. But when I selected the menu, the highlight disappeared. How do keep the highlight?
    The only topic I found about this was here:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=214931
    but it appeared intimidating and not exactly what I needed.

    Most javax objects will accept things in <html> tags why don't you try setting them onto the JTextPane (never tried this btw but should be worth a try) using html and the transferring the same syntax to the output email

  • When I reply to a e-mail, my reply always goes to the bottom of the page on the E-mail rather than on the top of the page. How can I fix that. in English

    Is there a fix for making the reply message start at the top of the Page rather than the bottom of the page. No one ever thinks to look at the bottom of the page for a reply message to a E-mail.

    Firefox doesn't do email, it's strictly a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". That is probably a setting in the web-mail software, like in their Preferences panel. There is no setting for that in Firefox.

  • My phone wont let me connect to my wi-fi even though i'm typing in the right password how can i fix that?

    i dont know why it wont connect

    You need to check the security settings from the router side of things. You may have a MAC address filter on the router that only lets approved devices connect.

  • Every time i press play now in runescape the browser closes how can i fix that?

    i tried scrolling to play now and press existing user but it still closes

    At your own risk, try the gDirectLinks Safari extension:
    Canisbos Safari Extensions

  • Playback PAUSE when Headphone Jack is removed

    iPod works great, one feature I'm wondering if you can disable - playback pausing when the headphone jack gets pulled out. Any way around this?

    Hey there,
    As of right now, you cannot disable it. Supposedly, there is a hardware mod you can pull off to make it happen, but there is no direct way of doing it. Sorry. Hope this helps.
    B-rock

  • Premier CS6 Playback stops when on Windows goes to sleep

    When playing out a sequence to Kipro in Premier CS6, the playback stops when the Window's Display goes to sleep. I cannot currently change this setting since our IT department controls it. Is there a way to change this in Premier or do I need to have IT give us the ability to change when the Window's display sleeps?

    You are Windows... you are carrying a package named Premiere Pro that you are delivering
    If you stop for a nap... how does the package you are carrying deliver itself?
    Talk to your IT people

  • After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

    After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
    Can I fix that just doing the upgrade for the Yosemite?

    Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
    Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
    I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
    This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
    Thanks fore responding to my question.
    DFelice

  • Word 2011 for Mac Book pro - I have found that my cursor disappears sometimes when I click on a toolbar function. I found out it is a bug, that the Mac loses 'focus'. I can correct it temporarily by clicking on Format - Font - Cancel. Any info?

    I have Word 2011 on a Mac Book Pro and have had problems with a dissapearing cursor - it makes editing tricky
    After googling it I found out that there is a bug where the Mac loses focus if you click away from the document - it also does this with italics according to other users.
    I had a play with it and found out that when I click on the toolbar in a document where this happens, the cursor disappears, e.g. changing font colour etc. And then, when I click on Format - Font - Cancel it returns
    I'd be interested if anyone else has a comment to add, please do
    thanks

    BTW (speaking as a Dad of 3 daughters in Grad school) if you don't already have and use a DropBox account, or some other similar online "cloud" based backup of your school documents, you should start doing so immediately. By keeping all of your important documents in the Dropbox folder on your computer, you have instant access to them from any other computer (or iPad), should you be w/o your computer while in for repairs (or if, God forbid, it is stolen). It's free for 2 GB of online storage, which is more than enough for a few years worth of Word documents, etc. (If you get other people to sign up via your email "invitation", then Dropbox gives you even more free storage space.) Every time you close a document, it is updated on the Dropbox servers (encrypted), if it is in the Dropbox folder (assuming you give it a few seconds to update before turning off your computer). Do a google search of "Cloud based storage comparisons" to compare the amount of free space each of the competing services give you.

  • When does a selection in a text field in a Finder window lose focus?

    Hello,
    this problem has emerged on account of an Applescript file that needs to access a text selection (portion of a filename highlighted) in an open Finder window.
    The bare minimum code to demonstrate the problem is this:
    *tell application "System Events"*
    * *tell process "Finder"*
    * *set selText to value of attribute "AXSelectedText" of text field 1*
    * *end tell*
    *end tell*
    other variants also exist, using "keystroke" but that does not work either. I am not asking help with Applescript here, it is here only to give a sense of the problem.
    My conclusion thus far is that the selection lose focus before the script process can access it. In the best case I get the full filename by using "attribute" and copy of the alias onto the clipboard by using "keystroke".
    So my problem is this:
    It seems that the focus stays alive when one clicks on a menubar item, any click on any other item on the desktop, including windows of irrelevant applications, changes the focus from the selection within the text field corresponding to a filename, to the filename itself.
    And my question is this:
    Is there a changeable setting within the OS that has to do with how long the focus stays alive on a selection within a text field corresponding to a filename? If yes, how do I change it?
    Thanks

    baltwo wrote:
    Thanks for clarifying. Never heard it called a text field, just a label. So, exactly what are you trying to accomplish? Is it that you want AS to select the file, highlight its label so you can edit/change it with some other text? If so, have you checked out the Finder scripts installed on the machine, especially the Finder script *Add to Finder Names*?
    UI Element Inspector calls the activated/editable filename a text field.
    Actually I want to modify one of the stock Finder scripts. I want to be able to select part of the file name in the active text field of the Finder window, then activate the script, *have the script pick up the selection* as a text string then use it internally.
    The bolded step is the one in question.
    Every attempt fails on the fact that the focus is lost from the "text field" and it reverts to the label for the filename, if I may use this distinction, (or to "FinderItem" in the parlance of UIEI) as soon as another process begins, it seems. So when the script becomes active, but before any of the commands is executed, the selection disappears.
    My guess is that it is not some absolute necessity but a setting that perhaps can be changed somehow.

Maybe you are looking for

  • Can I use more than one Apple ID on my iPad with the new is system? Ios 8?

    I Thought I read some where that I can use multiple Apple ID on the same device with the new OS coming out this fall?  I'm wondering if this is possible or not. I have an iPad mini and it's under my Apple ID but I would like to be able to use both mi

  • Indesign CC Video content

    Help! When placing videos into an Indesign document, the frame of the video is acting as a play button when exported as a PDF - I want it to only play when the button I've created is clicked. Is there any way to deactivate the play function on the vi

  • Who's who customization

    Hi all, What is the simplest way to customize the Who's Who webdynpro? I need to add fields from the Communication (0105) and Personal Data (0002) infotypes and display them in the Change Own Data iView. Regards, Rob

  • Possible to transfer iWeb page to another mac to work on?

    Hey there, If I have iLIfe '08 installed on my mac tower and powerbook how do I save the project so I can work on it on the road ? thanks t

  • SNP to PPDS order conversion

    Hi, I am trying to do small testing over PP run in SAP APO. I have created everything manually in SAP APO(Product,location,No source of supply at Plant) When running SNP at plant getting planned order without source of supply.Now i am trying to conve