Playbook not being seen in Windows 8.1

I have installed Blackberry Desktop and Blackberry Device Manager the Desktop software does not see the playbook when connected but the Divice Manager does!
I go the following error message when I checked in Windows Device Manager
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry."
What does it mean and how can I rectify the issue?
Margaret

This made me panic for a moment too, but the upgrade just made my phone forget my computer. When I unlocked my phone, it asked me whether or not I wanted to Trust the computer I was plugged into. After choosing Trust, then unplugging and plugging back in, it showed up again. Hopefully that's all that's happening for you too.

Similar Messages

Issues with Blackberry Playbook not being recognised by Windows Explorer

Hello, I'm new to the forums but am having the same problems as many others are, that being my Playbook not regonised by Windows Explorer. I have tried all of the solutions I have read like unistalling Desktop Manager, uninstalling then re-installing drives in Windows Device Manager. But one I recently stumbled across was uninstalling Blackberry Device Manager, how do I do this?
Also the main problem appears to be that my Playbook will not sync anything with my computer. In Desktop Manager I can back-up my Playbook, but not sync anything. After re-installing a drive I now get the message of: 'Your Blackberry device is not compatible with this feature' whereas before I got the message of: 'You haven't configured any sync methods' but yet all of the sync options were greyed out.
How do I get Windows Explorer to recognise my Playbook as a drive and how can I sync in Desktop Manager?
Thanks in advance!
Note: I'm using Windows 7 32-Bit

Hello Tobster_,
The following article should also help with detecting your BlackBerry® PlayBook™ tablet:
Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook - http://www.blackberry.com/btsc/KB27424
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

IPod Not Being Seen By Windows, Need Help ASAP...!

I just bought my iPod last year, when to charge it, as well as get some stuff of the HDD, but Windows pops up with an error message saying it's not working. It was working fine a few days ago. Now, for all intents and purposes it seems dead, and there is important stuff I need on the HDD...what can I do?!
Message was edited by: mlauzon76

I cannot do any of that, the iPod doesn't turn on, and Windows gives an error saying the USB device is not working...so I cannot get anything off my disk. Who at Apple, do I send my iPod to, it'll be a year old for me this coming July?!

Certificate Authority is not being seen by windows server 2003 machines

Good Afternoon,
We recently installed a certificate authority using windows server 2008 r2. There was an old certificate authority that had went bad and the role could not be uninstalled on the bad server. The new certificate authority works with windows 2008 machines but
does not work with server 2003 machines. Mainly trying to get the domain controller certificate. At first it was stating that the rpc was unavailable for the CA. I tried to delete the remnants under the sites and services role of the old server. The error
now it states that it can not find a certificate authority. As stated above the newer machines (Server 2008) can see the certificate authority and request certificates but older machines cant. Any assistance on what to do next will be greatly appreciated.
Attached is the error I receive when trying to request a certificate through the CA mmc.
dmg

It is possible to change the hash algorithm a CA uses to support XP and 2003 "out of the box" without the hotfix.
But it would be better to have two CAs in parallel - one using a more modern algorithm and a CA supporting a "legacy" algorithm - and the latter should only be used as long as there are clients that aren't able to validate the other algorithms.
On the CA, start regedit and locate the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\<Your CA>\CSP
I am assuming that the Software CNG provider is used with SHA256 or higher (not with SHA1).
Change CNGHashAlgorithm to SHA1 and restart the CA service.
The setting can be reverted by changing the value back. All certificates and all CRLs signed by this CA will use the new hash algorithm after the restart.

Ei.cfg not being seen by windows installer on Windows 7 Home Premium 64 bit retail disk.

My problem is that the retail disk of Windows 7 Home Premium 64bit has no ei.cfg restrictions. Instead of choosing the correct operating system ID, on install, the .cfg
is coming from some where else installing a custom version of windows that is a different version of windows than on the retail install disk that I have a software key to. Even though it recognizes the key as windows 7 the operating system no longer recognizes
the retail disk it was installed from as the same version of operating system. It seems that there is a pre operating system install to a volume that cant see the ei.cfg file on the windows retail disk. It is something like Windows ME or MCE and it is hard
to get past because it acts like the operating system after install. It looks like there is a complete install of windows 7 but it is only a version of ME or MCE in the 100MB range installed to a partition volume. I am given a User account Profile within
Application Data folder in the system. The actual windows system in its entirety does not exist in the partial virtual operating systems. All the installs are to Partition Volumes on the Partition of a GPT Server Partition on a Disk
on the Hard drive. All Virtual.
Windows 7 Home Premium 64bit and 32bit retail disk is GSP1RMCHPXFRER_EN_DVD. The bios version on my Asus G75VX is American Megatrends version 206, V Bios version 80.04.97.00.13.N62G75500, EC version B14E140001. The operating system version is not the same
as the install disk. The boot configuration is; American Megatrends Bios Aptio Setup Utility installed. :\\?|GLOBALROOT\Device|HarddiskVolume1\EFI\Microsoft\Boot\BCD.Backup.0001 Software build after install is Buildlab 7601.Win7Sp1_rtm.101119-1850 Client install
BuildlabEx 7601.17514.amd64Fre.Win7Sp1_rtm.101119-1850, CSD Build Number 1130, Product ID 00 359-112-0000007-85245, Product ID 55034-112-0000007-05640. System Reserved Partition Volume X:\{F750E6C3-38EE-11D1-85E5-00C04FC295EE} MININT-F26UD4N. Link to 170MB
.reg file in text format http://1drv.ms/1m9RXL7.
The above information was taken after an install from the Microsoft Windows 7 64 bit retail disk purchased at Fry's and installed to my Asus G75VX. It is a Network Managed Client Server configuration that installs from the retail disk.

I have been dealing with this problem since the day I purchased the first notebook from Best Buy configured this way and it was not even an Asus. It was a Samsung Chronos i7. The Asus G75VX I have now is the third notebook in a row purchased from Best Buy
with the configuration right out of the un open retail box. None out of the three came with windows 7 installed. They had windows 8 64bit installed with the configuration. I purchased Windows 7 Home Premium 64 bit attempting to get around the configuration
problem.
My main concern is that I use computers to do my legal documents in court cases in the United States Federal Courts and I am a pro se litigator and I have been litigating a civil action since 2011 that is still open in the federal court. I am also legally
disable and covered by Federal Communications Act FCC Rule 255. This configuration has Telephone software and equipment, Management Software and equipment, and Networking software and equipment all covered within FCC Rule 255. My notebook is unusable for litigation
or personal use as a Publicly Managed Network Client Server. I paid $1350.00 of my Social Security Disability income for the Asus G75VX and another $216.00 for Windows 7 Home Premium 32 and 64 bit DVD and that is not counting a list of other things to
now have a personal notebook computer I have to sat down beside me in public libraries, Colleges etc. to use their computers to do my legal work. It is illegal and total wrong and it is a violation of the Bill of Rights First and Fourth Amendments and Title
VI of the Civil Rights Act of 1964 and the American with Disability Act outside of 255.

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.

DVD 1270 not being seen in xp to install at start up windows 7

DVD 1270 not being seen at startup in xp to install windows 7. Boot order works - the machine sees a cd but not a dvd. Installed latest driver for lightscribe from this site. Also tried two other dvds - one a hp 1160 which works on another machine it sees the dvd on other machine running w7 but not on this new one - ASUS mthrbd P867-M Le. ASUS says it is the DVD and to try another. Seems like it may be a config issue. Any ideas? Thanks

Well, if the drive is good, then try a different SATA port. It might be that the OS is looking for the drive per the BIOS and it is not on the SATA 0 port. BTW: Does this motherboard have 6GB SATA ports? Do not use them for DVD drive.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

I have MA147X 60GB ipod and it is not being recognised by windows or Itunes

I have connected my IPOD to the PC however neither windows or Itunes are recognising it.
Also getting an error message ACCESS DENIED

Thanks But all those options assume that my IPOD is being seen by windows.
I get this error when I connect and the software is trying to install the drivers

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
Any ideas?

Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X

Hp laserjet p1006 is not being installed on window server2008 64 bit

hp laserjet p1006 is not being installed on window server2008 64 bit

Hi,
The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaCie d2 500GB Quadra Hard Drive Not Being Seen By Time Machine

Hello all,
I have a LaCie d2 500GB Quadra Hard Drive Not being seen by Time Machine hooked up to my iMac via firewire 800. My iMac is running latest updates etc. Have raised a support ticket and was given the following instructions by LaCie:
Posted: 08 November 2007 @ 00:00
Thank you for contacting LaCie Technical Support. Make sure the drive is mounting and you can assess files on it on your 10.5 system. If you can then you will need to reformat the drive to make it compatible with time machine.
Warning! All data on the external drive will be destroyed in this process.
Step 1: Run Applications > Utilities > Disk Utility
Step 2: Click on the LaCie hard drive's 'physical' entry, usually the third entry in the list
Step 3: Click on the Partition tab
Step 4: Change 'Current Scheme' to '1 Partition'
Step 5: Change the name of the drive back to what you would like it to be
Step 6: The format needs to be Mac OS Extended, with or without journaling
Step 7: Click on the Options... button
Use "Apple Partition Map" partition scheme on a PowerPC-based Mac.
Use "GUID" partition scheme on an Intel-based Mac.
Step 8: Click on OK
Step 9: Click on Apply
Step 10: click on Erase at the bottom of the screen, then confirm the erase.
The drive should start to be reformatted which should take only a few seconds and show up on the desktop with a new icon. Once it has you can then use it with time machine.
I have done all of the above and it is still not being seen. Anyone had a similar issue or got the above to actually work?
Thanks in advance!!!!

Ryan,
Check drive volume name and also the Computer name. Apple released a tech note recommending that both be limited to only the characters A-Za-z0-9 (no dashes, hyphens, or other special characters.
If you can, send the Apple System Profiler report to me at the addres in my profile. Imay be able to see something there. I have helped another user with similar problems, but with a LaCie USB drive. He got things working by repeating the recommended steps, and double checking everything.
As others have rported, this should work, so there may be something else preventing proper operation.
If the drive is usable from Finder, but Time Machine cannot use it, there is something related in how Time Machine is viewing the drive.
Mike

My Goflex external drive is not being seen since I installed Lion, any ideas.

My Goflex external drive is not being seen since I installed Lion, any ideas I cannot see any driver updates etc.

Try resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit. I have the iPhoto app but pictures not being seen on iPad. So incredibly frustrating. Apple please fix this.

Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit. I have the iPhoto app but pictures not being seen on iPad. So incredibly frustrating. Apple please fix this.

Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
What format are the pics - jpg or raw?
 Cheers, Tom

IPOD TOUCH 3G NOT BEING RECONIZED IN WINDOWS 7

IT WORKS WITH WINDOWS XP BUT IUT DOESNT APPEAR AT ALL IN WINDOWS 7, I HAVE TRIED EVERYTHING IN THE SUPPORT FORUM I COULD THINK OF AND STILL NO LUCK. SOMEONE MSAID IT MIGHT BE SOMETHING TO DO WITH THE USBAAPL.SYS SINCE WINDOWS 7 USES MTP.SYS
I'V TRIED IT ON 3 DIFFERENT LAPTOPS WITH WINDOWS 7 AND STILL NOTHING.... PLEASE HELP

Windows 7 64-bit does not have a DFU mode USB driver for i-devices. This means that if your ipod touch 3g is in DFU mode, it will not be seen by windows. If you do not know what DFU mode is, try this: While your ipod is plugged into the computer, hold down the Power and Home buttons. Do this until you see an apple appear on your itouch, then release the buttons. This should place your iTouch into normal mode. To use DFU mode on your computer, you must have a 32-bit operating system.

Playbook not being seen in Windows 8.1

Similar Messages

Maybe you are looking for