Playlist ordering with 4G shuffle NOT possible

It's not possible to sync the order of songs with the 4. Generation of the iPod shuffle. THe shuffle is playing always ordered by Artist.
Changing the order in iTunes and re-sync the iPod doesn't affect the order on the iPod shuffle.
Is this a bug in the firmware of the 4G shuffle or a problem with iTunes?

You can sort all the music that is not in a playlist on your shuffle. It inherits whatever sort you have selected for your entire music library in itunes. To see what I am talking about, do this:
1. Under Library (on the left side of iTunes) click "Music"
2. You now see on the right your entire music library. At the top, click the top of the column you want to sort by. You can right click to add more columns
3. Sort by something different than what you are currently sorting by.
4. Connect your shuffle and wait for it to come up
5. When your shuffle appears on the left, open it and click "Music" and note how it is sorted. The column it is currently sorted by will be darker in its heading and their will be a triangle in that columns heading
6. Now click on the name of your shuffle and click sync.
7. Go back to your "Music" entry on your shuffle and you will see it is now sorted by the column you changed your iTunes music library too.
So, your music on your shuffle will inherit the sort order you have set for your entire library on itunes, when you sync it.
Does that make sense?
i

Similar Messages

Release orders against contract 4600000069 not possible (contract not relea

Hai,
I had created a contract and had a release procedure for it.
I had released the contract using ME35k.
When i try to raise a p.o agaist the contract i am getting the error as "Release orders against contract 4600000069 not possible (contract not released)"
What could be the problem and solution for the above error message.
Thanks
Hari.

Bijay Kumar Barik wrote:
Hi,
>
> Error clearly says, contract not released. Release order can be created against contract ,if contract is released.Check=> you may used ME35K to release the contract , but after releasing with releases code, you have not saved the release .Just do use again ME35K to release the contract with release code & save.
>
> NOTE:
> Also check how many levels of release is there for contract and check all levels of release with respective release codes is done or not before creating release order WRT contract.
>
> Regards,
> Biju K
I had released and saved for all the levels i.e for all the release codes.
Still it is behaving the same.
I have not used any ref purchase org as mentioned above in one of replies.

Error:-document is in transfer for purchase order..creation is not possible

Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?

Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao

HT201272 connection with itunes is not possible

hello,
because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
how to solve this problem?

Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

Return Order Creation with Multiple Lines not possible - EHP3

Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order(BT120H_CPL/NewComplEF ), the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit

I hope you have tried.If not can you please try with below qualifier
'015' Billing Document Number of Invoicing Party
Provide the billing document EEDK02-BELNR.
Also give qualifier at item level
E1EDP02 : use Qualifier =15
Provide the Billing document number at E1EDP02_BELNR and item at ZEILE.
I am not sure what is error you are getting when you are referencing billing document.If something STD Idoc is not working as you expected use your custom logic to bring the data when you are posting the Idoc.
I have not worked on sales order process,But I have worked on Purchase Order creation process.
Please let me know the error ,If i know the error i will defiantly help you.

Return Order Creation with Multiple Lines not possible - 7.0 to EHP3

Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order, the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit

>>. But is it possible in PI 7.0?
Just few cents..
Test using SOAPUI or XMLSPY and use that same WSDL URL in the target URL of Communication channel. Just to make sure you use the right endpoint.
or
You can specify the method name as soap action dynamically using udf in mapping and see how it behaves.

The playlist order on iTunes does not match the playlist order on my iPhone!!

Okay, I have been browsing discussion threads for the past two hours and nothing seems to be working!
I have essentially two playlists that I would like on my iPhone. One is the "purchased" folder that is automatcially created when you buy a song. I have it arranged by "date added". The second playlist I want is called "music library"... there I have simply copy and pasted all my songs into a playlist and sorted them by "play count". However, no matter what I do (ie. switching the order from starting from the "lowest play count" to the "highest play count", starting new smart playlists with the "playlist is music" criteria, and right clicking the playlist and clicking "copy to play order") NOTHING SEEMS TO BE WORKING!! Please help me, I just want them in the order I have them on iTunes.
Thank you!

I had the same problem but got my playlists synced perfectly a few nights ago. i did a few things at a time so i'm not sure which exactly did it. my playlists were coming up in reverse order on my iPhone. Most played appeared starting with the least of the most played. With the iPhone plugged into the computer, the iPhone appears in itunes. When i expanded it, i saw eclaimation marks near a few of the smart playlists. the error message was something along the lines of "could not sync playlist becuase it relies on another playlist that could not be found".
Now my smart playlists still had the fix from way back when you had to add a condition saying playlist is Music, and it seemed that the playlists "Music" not being on the device confused it somewhat. so i modified my smart playlists to not rely on any other smart playlists, unsynced and resynced those playlists from my phone and it all came up perfectly from then on, no problems for the last few days.
I think it's an ios bug as syncing another phone on older ios4 got the playlist order perfectly before all of these changes i made. Hope that helps someone, it was driving me nuts for weeks.

Create internal order with reference - Do not copy distribution rule group

Hi,
I'm creating an internal order with reference to another order through tcode KO01. When i will display the new internal order, i already have distribuion rule group that was copied from the reference order. To delete the incorrect distribution rule group i execute tcode KO02, however this information do not appear in tcode KO02.
What should be done to delete this settlement rule? I do not want to copy the settlement rules from the old internal order.
Thanks in advance.
Regards,
Ana Fernandes

Hi.
'What should be done in order to do not copy this information when i create the internal order with reference?'
in tcode kot2_opa do not maintain Settlement profile for Order category 3
Also go to KOM2 and delete Settlement rule for order, from which you copying.
'in table COBRB i can see the information however i can not delete it. The validy period is empty.'-in su53 check authority

Save Order with an item not confirmed

Hello Folks!
I hope you can have an answer for me:
I have a sales order with 10 line items. Nine of them have enough stock to be covered but just one not. Currently I can not save the sales order with the confirmation of the other 9 line items until this item without stock could be covered. This makes this order useless because my customer is complaining.
What are the modifications needed in the system so that:
- I keep the 10 line items,
- confirm only 9 of them
- leave 1 item pending until the stock arrives ( I do not want to delete the line item without stock from the order. I would like to keep it as it comes from the original order
Any idea on how to solve this issue?
Thanks for you time

Hi María del Carmen,
I think you should review it with your SD consultant. At first glance is strange that it errors out instead of warning you, which would still allow you to save the order.
I think some leads to the problem area: It could be the sales order type has an incompletion log rule that doesn't allow to save the sales order unless the stock is available or the definiton of schedules lines, at the order type level, requires stock availability for every line item of the order.
Hope this helps.
GG

Charts with Makit, scrolling not possible

Hello Forum,
I'm experiencing an issue regarding Makit Charts on Mobile.
The problem is that is not possible to scroll down the page on mobile if the charts is 100% (width and height) and in both directions landscape and portrait.
The chart's container is sap.m.Page and as explained in the official documentation the scrolling is provided automatically.
I attach my code and both images (desktop and mobile).
Hoping your answers could help me.
Thanks.
jQuery.sap.require("sap.m.MessageBox");
sap.ui.jsview("demo.charts.views.Multichart", {
getControllerName : function() {
return "demo.charts.views.Multichart";
createContent : function(oController) {
var page = new sap.m.Page();
var value = new sap.makit.Value();
// var category = new sap.makit.Category();
var category_axis = new sap.makit.CategoryAxis;
var series = new sap.makit.Series();
var bubble = new sap.makit.ValueBubble();
category_axis.setDisplayLastLabel(true);
page.setTitle("Multi Chart");
value.setExpression("Netwr");
value.setFormat("currency");
value.setDisplayName("Revenue");
// category.setColumn("Gjahr");
// category.setDisplayName("Year");
series.setColumn("Bukrs");
series.setDisplayName("Company");
bubble.setStyle(sap.makit.ValueBubbleStyle.FloatTop),
bubble.setShowCategoryText(true);
var chart = new sap.makit.Chart({
// category : category,
categoryAxis : category_axis,
valueAxis : new sap.makit.ValueAxis({}),
series : series,
values : value,
valueBubble : bubble,
categoryRegions : [
new sap.makit.Category({ column : "Gjahr", displayName : "Year" })],
chart.setType(sap.makit.ChartType.Column);
chart.setShowTableView(false);
chart.setShowRangeSelector(true);
chart.setShowTableValue(false);
chart.addColumn(new sap.makit.Column({
name : "Gjahr",
value : "{Gjahr}"
chart.addColumn(new sap.makit.Column({
name : "Netwr",
value : "{Netwr}",
type : "number"
chart.addColumn(new sap.makit.Column({
name : "Waerk",
value : "{Waerk}"
chart.addColumn(new sap.makit.Column({
name : "Bukrs",
value : "{Bukrs}"
chart.setModel(this.oModel);
chart.bindRows("/Chart_DataSet");
chart.attachEvent("tap",function(oEvent){
var isRightMB;
var e = oEvent.getParameter("eventObject");
if ("which" in e) // Gecko (Firefox), WebKit (Safari/Chrome) &
// Opera
isRightMB = e.which == 3;
else if ("button" in e) // IE, Opera
isRightMB = e.button == 2;
if(isRightMB){
var srcObj = oEvent.getSource();
// var srcElem = srcObj.getDomRef();
var temp = document.oncontextmenu;
document.oncontextmenu = function (e){
document.oncontextmenu = temp; // reset back to its
// original state, so that
// other elements still have
// context menu
return false;
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Right Click - Selected Category", [sap.m.MessageBox.Action.OK] );
chart.attachEvent("doubletap",function(oEvent){
var chartObj = oEvent.getSource();
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Double Tap - Selected Category", [sap.m.MessageBox.Action.OK] );
var oButton = oController.generateConfigPopover(chart);
var oBar = new sap.m.Bar({
contentLeft : [ new sap.m.Button({
text : "Back",
type : sap.m.ButtonType.Back,
press : [oController.handleNavButtonPress, oController]
contentMiddle : [ new sap.m.Label({
text : "Multi Chart"
contentRight : [ oButton ]
page.setCustomHeader(oBar);
page.addContent(chart);
return page;

Hi,
I don't have "Advanced" tab in Mouse settings in control panel. Is there something i need to install in adition to Toshiba Synaptics drivers?
I also tried changing every available setting in Synaptics drivers settings, but no change :(
About Synaptics generic driver: Yes, I chose that one, but as I said, it's really buggy with two finger scroll, so I reverted back to Toshiba ones.

Recording at 96k with Line6 Toneport not possible with Audition??

Is anyone else out there using a Line 6 Toneport device to record in Audition? This is a 96k recording device but choosing "96k" is not possible in Audition. I just spoke to Line 6 support and they say it's the fault of Audition. They say I have to choose 96k within Audition but I don't have to do that with my other devices. I'm able to record at 96 using other devices no problem by choosing in in the device control panel. The Line6 Toneport control panel doesn't give 96k as an option.
So Line 6 tells me that it's impossible to record at 96k in Audition. Please tell me it isn't so???
Anyone got any help here?
thanks!

A slight departure from previous behavior is that Audition no longer automatically changes the sample rate of your device. There were too many problems when switching between different applications (e.g. between Premiere Pro and Audition, or Audition and Windows Media Player, etc) and the clock setting changing on the device, and then the device "freaking out" (to put it politely).
So, if there's software that came with Echo where you can change the clock settings, you might want to set it to 96 kHz there first, and then Audition CS5.5 should just go along with 96 kHz.

Error with IBAN Generation not possible

hello
In transaction XK01, when I create a vendor in bank details I have an error when I add the IBAN. This vendor is Spanish.
If I create directly the IBAN I have this message : " Generation not possible". Why.
But if I create this supplier by entering the first :
- County,
- Bank key
- Bank account
- CK
The iban be generated without errors.
I set this bank in FI01.
Could you help me.
Best regards

hi, I am using ECC500 and I just follow following instructions.
It is working fine.
Cheers
>
SAP Note 503182:
>Solution
>    1. Copy function module SAMPLE_INTERFACE_00003030
> from SAMPLE_INTERFACE_00003030
>    to CONVERT_BANK_ACCOUNT_2_IBAN_ES
>      Function group: IBAN
>      2. Copy function module SAMPLE_INTERFACE_00003040
>      from SAMPLE_INTERFACE_00003040
>      to CONVERT_IBAN_2_BANK_ACCOUNT_ES
>     Function group: IBAN
   >   3. Implement the attached source code corrections.
    > 4. BTE setting:
   >   Transaction: FIBF
>    Settings -> P/S function modules
    > Create the following entries:
     > Event      Country    Function module
      >00003030   ES        CONVERT_BANK_ACCOUNT_2_IBAN_ES
     > 00003040 ES         CONVERT_IBAN_2_BANK_ACCOUNT_ES

Playlist Order With Numbers

I just picked up a new 120GB iPod Classic (after my trusty iPod Photo finally croaked) and there's a change that I wanted to query.
I have a fair few playlists set up for various occasions - running,parties, etc. - and to keep those lists together, at the top of the list, I number them: e.g. '1 Running', '2 Party', '3 Spotting Trains', '4 Banging Head Against Wall', etc.
I have about 25 of these lists, and in iTunes, as well as on my previous iPod, that order was totally numerical. Ten came after nine and was followed by eleven.
On the new iPod, numbers 10 to 19 are listed between 1 and 2, and number 20 to 25 come between 2 and 3. Which is to say: back how file names used to be before this problem was solved.
Does anyone know if there's a way to fix this issue? It seems odd that iTunes and the iPod would do things differently.
(On a separate issue, the Classic is running a little slower on start up, etc., than I'm used to - due, no doubt, to the images constantly being processed in the display. Is there a way to switch this mostly-useless facility off?)

It would seem I have a similar problem, I have a new iPod Classic (120GB) for use as an Audio Book, but when I load it with MP3 books, that have been split up into chapters, they appear on the iPod not in the order that they are in in iTunes, ie the chapters are mixed. As also with the movements in a classical piece of music. I know that in pop music each piece is independent and they can all go together in a hundred different way. Is there no way of insuring that the order of the individual items in an album in iTunes, is maintained when it is downloaded into the iPod Classic? The parts of the whole are in individual folders/albums and the Shuffle option in the info box is set to ‘skip’ which I took to mean that they would all stay where I put them.
How about an answer Apple, as also for my iPod Touch Cover Flow problem on that forum.

Run keeper app won't shuffle my workout playlist even with the shuffle button on

Run keeper app won't shuffle my workout playlist. This started when I upgraded to Iphone 6. The shuffle button will not stay in the on positio.

This is a problem with the app "Run Keeper" not iOS itself or your phone. Report your problem to the App developers.

Reopening Scene Menu for DVD's with chapters is not possible

Cannot reopen the scene menu after stopping play in a chapter and neither TV or DVD players help. How can I go back to scene menu direct without going through the main menu? Thanks for helping.

dallasosborne
You cannot do what you describe with a DVD-VIDEO with menu on DVD disc created in Premiere Elements (any version).
The best that I can do, after I stop the playback of a scene midway into it, is to hit submenu to get be back to the
main menu page and there hit Scene Selection to get to select another scene.
Until proven otherwise, I do not believe it is possible for you to do what you describe with your Premiere Elements DVD-VIDEO disc menus.
ATR
Add On...I did not see SG's post until after I had posted mine.

Playlist ordering with 4G shuffle NOT possible

Similar Messages

Maybe you are looking for