PLD sorting and grouping

Hello
I would like to raise a question I am not able to answer
I want to group invoice at the end of the month with all delivery notes created within the month
The question is that some lines are text lines and there is no DN attached to the the line
as a result on the invoice the first group is DN without number grouping all empty lines
then I can see the grouping of delivery notes number
My question is how to delete on the lay-out the text lines so the document is clean and not showing a group of empty lines at the start of the document
thank you

Hi,
1. Create a field with variable 157, let's say it's field F_001
2. Create a formula field: F_002: F_001!='T'
3. Link all the row level fields on the repetitive area to this formula field. They will be displayed only if the row type is not text.
Regards,
Nat

Similar Messages

  • Using member sorting and grouping with two reports sharing rows

    Hi!
    I have a problem with one report and I need some help or advise here.
    I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
    PRODUCT               MATERIAL          AMOUNT
    TOTAL PROD_A-X                                   100
    PROD_A_A             MAT1                          22
    PROD_A_B             MAT1                          50
    PROD_A_A             MAT2                          28 
    TOTAL PROD_B-X                                   120
    PROD_B_A             MAT1                          30
    PROD_B_A             MAT2                          50
    PROD_B_B             MAT2                          40
    This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
    Thank you very much

    Hi!
    I have a problem with one report and I need some help or advise here.
    I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
    PRODUCT               MATERIAL          AMOUNT
    TOTAL PROD_A-X                                   100
    PROD_A_A             MAT1                          22
    PROD_A_B             MAT1                          50
    PROD_A_A             MAT2                          28 
    TOTAL PROD_B-X                                   120
    PROD_B_A             MAT1                          30
    PROD_B_A             MAT2                          50
    PROD_B_B             MAT2                          40
    This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
    Thank you very much

  • Sorting and Grouping -Two months in this query

    Hi All,
    many thanks for jeneesh
    i am doing project for construction company, i face this problem in grouping points according to relation between these points the
    Relation is from 1 to 100. If the point between this rang that mean there is relation between these points.
    this question already solve but the results not correct when the table has more data.
    SQL - sorting and grouping.
    from jeneesh and many thanks for him.
    This example for more clarifications
    for example i have these points
    id   location         percentage   comments
    1     loc 1,2          20%                that mean point  1 and 2 close to each other by 20%
    2     loc 1,3          40%              that mean point 1 and 3 close to each other byy 40%
    3     Loc 8,6          25%               that mean point 8 and 6 close to each other by 25%
    4     Loc  6,10        20%
    5     LOC 11,10        10 %
    6     LOC 15,14         0%Also , we can see the relation between these points as follwoing
    - points 1,2,3 in one group why becuase 1,2 has relation and 1,3 has relation that mean 1,3 also has hidden relation.
    - Points 6,8,10,11 in second group there are relations between them .
    - but no relation between 1 or 2 or 3 with any point of 6,8,9,10,11
    - as well as no relation between 15, 14 that mean 14 in third group and 15 in fourth group.
    whati need?
    to group the points that has relation according to percentage value ascending
    The most important part is to group the points. SO , the below query the gropuing is not correct.
    I have the follwoing table with data
    drop table temp_value;
    create table temp_value(id number(10),location varchar2(20), percentage number(9));
    insert into temp_value values  (1,'LOC 1,2',10);
    insert into  temp_value values (2,'LOC 1,3',0);
    insert into  temp_value values (3,'LOC 1,4',0);
    insert into  temp_value values (4,'LOC 1,5',0);
    insert into  temp_value values (5,'LOC 1,6',0);
    insert into  temp_value values (6,'LOC 2,3',0);
    insert into  temp_value  values(7,'LOC 2,4',0);
    insert into  temp_value values (8,'LOC 2,5',30);
    insert into  temp_value values (9,'LOC 2,6',0);
    insert into  temp_value values (10,'LOC 3,4',0);
    insert into  temp_value values (11,'LOC 3,5',0);
    insert into  temp_value values (12,'LOC 4,5',40);
    insert into  temp_value values (13,'LOC 4,6',0);
    insert into  temp_value values (14,'LOC 6,7',40);
    insert into  temp_value values (15,'LOC 7,2',0);
    insert into  temp_value values (16,'LOC 8,2',60);
    insert into  temp_value values (17,'LOC 8,3',0);
    insert into  temp_value values (18,'LOC 3,1',0);
    insert into  temp_value values (19,'LOC 9,6',30);
    insert into  temp_value values (20,'LOC 11,2',0);
    insert into  temp_value values (22,'LOC 12,3',10);
    insert into  temp_value values (23,'LOC 19,3',0);
    insert into  temp_value values (24,'LOC 17,3',0);
    insert into  temp_value values (24,'LOC 20,3',0);when i used this query , the results is not correct
    with t as
        (select percentage,loc1,loc2,sum(case when percentage = 0 then 1
                           when loc1 in (l1,l2) then 0
                       when loc2 in (l1,l2) then 0
                       when l1 is null and l2 is null then 0
                       else 1
                  end) over(order by rn) sm
        from (     select id,location,percentage,
                           regexp_substr(location,'\d+',1,1) LOC1,
                          regexp_substr(location,'\d+',1,2)  LOC2,
                         lag(regexp_substr(location,'\d+',1,1))
                          over(order by percentage desc) l1,
                          lag(regexp_substr(location,'\d+',1,2))
                          over(order by percentage desc) l2,
                  row_number() over(order by percentage desc) rn
          from temp_value
          order by percentage desc
       select loc,min(sm)+1 grp
         from(
           select loc,rownum rn,sm
           from(
           select percentage,decode(rn,1,loc1,loc2) loc,sm
           from t a,
                (select 1 rn from dual union all
                 select 2 from dual ) b
           order by percentage desc,decode(rn,1,loc1,loc2) asc
        group by loc
       order by min(sm),min(rn);the results
    SQL> /
    LOC                         GRP
    2                             1
    8                             1
    6                             2
    7                             2
    4                             3
    5                             3
    9                             4
    1                             5
    12                            6
    3                             6
    11                           13
    LOC                         GRP
    19                           14
    17                           15
    20                           22
    14 rows selected.SQL>
    but the correct is
    Location        group No
    2                  1
    8                  1
    4                  1
    5                  1
    1                  1
    6                  2
    7                  2
    9                  2
    12                 3
    3                  3
    19                 4
    17                 5
    20                 6many thanks in advance.
    Edited by: Ayham on Nov 30, 2012 3:07 AM

    Thanks,
    i want the sorting for each group DESC not all groups to gather
    when i used your query i get
    SQL> with connects as (
      2  select distinct
      3   loc1
      4  ,loc2
      5  ,dense_rank() over (order by connect_by_root(loc1)) grp
      6  from temp_value
      7  start with
      8  percentage != 0
      9  connect by nocycle
    10  (prior loc2 = loc1
    11  or
    12  prior loc1 = loc2
    13  or
    14  prior loc1 = loc1
    15  or
    16  prior loc2 = loc2)
    17  and
    18  percentage != 0
    19  )
    20  ,  got_grp AS
    21  (
    22     select
    23      loc
    24      ,dense_rank() over (order by grp) grp
    25      from (
    26      select
    27       loc
    28       ,max(grp) keep (dense_rank first order by grp) grp
    29       from (
    30       select
    31        loc1 loc
    32        ,grp
    33        from connects
    34        union
    35        select
    36         loc2
    37         ,grp
    38         from connects
    39         )
    40         group by
    41         loc
    42        )
    43  )
    44  SELECT       loc
    45  ,    grp
    46  FROM         got_grp
    47  ORDER BY  COUNT (*) OVER (PARTITION BY grp)   DESC
    48  ,            grp
    49  ,    loc
    50  ;The output is
    LOC                         GRP
    1                             1
    2                             1
    4                             1
    5                             1
    8                             1
    6                             3
    7                             3
    9                             3
    12                            2
    3                             2
    10 rows selected.but i want it like this
    Loc  Grp
    2      1
    8      1
    4      1
    5      1
    1      1
    12    2
    3      2
    6      3
    7      3
    9      3So , the sorting for each group Separate based on the percentage column.
    many thanks
    Edited by: Ayham on Nov 30, 2012 9:43 AM

  • Sorting and Grouping in Projects View

    In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
    (It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
    There are four sorts available, and three groupings
    Sorts:
    . Name
    . Date -- Oldest First
    . Date -- Newest First
    . Library
    Groupings:
    . Ungrouped
    . Group by year
    . Group by folder
    So that's twelve possible ways to display Projects in Projects view.
    Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
    Sort: Date -- Newest First
    Grouping: Group by Year
    Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
    Sort: Date -- Oldest First
    Grouping: Group by Year
    Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
    Sort: Name
    Grouping: Group by Year
    Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
    Sort: Library
    Grouping: Group by year
    Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
    Sort: Date - Newest First
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
    Sort: Date - Oldest First
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
    Sort: Name
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
    Sort: Library
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
    Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
    +I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
    The answer is, it depends.
    If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
    If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
    If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
    That's all I have to say on this topic (today).
    Message was edited by: Kirby Krieger

    In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
    (It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
    There are four sorts available, and three groupings
    Sorts:
    . Name
    . Date -- Oldest First
    . Date -- Newest First
    . Library
    Groupings:
    . Ungrouped
    . Group by year
    . Group by folder
    So that's twelve possible ways to display Projects in Projects view.
    Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
    Sort: Date -- Newest First
    Grouping: Group by Year
    Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
    Sort: Date -- Oldest First
    Grouping: Group by Year
    Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
    Sort: Name
    Grouping: Group by Year
    Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
    Sort: Library
    Grouping: Group by year
    Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
    Sort: Date - Newest First
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
    Sort: Date - Oldest First
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
    Sort: Name
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
    Sort: Library
    Grouping: Group by folder
    Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
    Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
    +I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
    The answer is, it depends.
    If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
    If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
    If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
    That's all I have to say on this topic (today).
    Message was edited by: Kirby Krieger

  • Sorting and Grouping by multi-value Choice columns - any options?

    I found out the hard way that SharePoint doesn't support sorting or grouping lists by Choice columns that are set to "Allow Multiple Values." I'm stunned by this missing capability, and my project has come to a complete halt without it. It's like Microsoft only implemented hafl the feature -- you can put data in, but then you can't do anything with it. You can't even use the column in a formula in another column, so you can't parse it.
    I'm not posting just to gripe though. Does anyone have any suggestions for alternatives? What do you do when you need to let people make multiple selections, and then you want to sort or group by those values? Are there any add-on products that allow this? At this point my only option seems to be to not allow multiple choices, but that's taking away a rather significant feature.
    Thanks for any ideas,
    Steve

    Hi Paul,
    Thank you for the reply and the additional questions. For my situation I want to use the multi-value choice to indicate a "belongs to" relationship, as in "this item belongs to projectA, projectB, and project C. Because there are more than 10 projects, I didn't want to create a separate Yes/No checkbox for each one.
    For viewing the information, I'm looking primarily for a "group by" function.  So if an item belongs to projectA, projectB, and projectC, it would appear three times, once under the grouping for each project. What I don't want is for a row that only belongs to projectA to be grouped separately from a row that belongs to both projectA and projectB. I want to see all the rows that belong to projectA grouped together, regardless of whether they also belong to other projects.
    I'll look into using a grid control, but if you have any other suggestions I'll certainly listen.
    Steve

  • Swatches CS3 - Sorting and grouping possible?

    Hello,
    a simple question. Is it possible to sort or group swatches?
    If the answer is yes, how do I do it?
    Thanks,
    Matt

    You can select and drag them up and down the panel.
    k

  • TableModel with SORT and GROUP BY functions solution.

    Hello all,
    I'd like to represent an EnvelopeTableModel. This class is developed to incapsulate another TableModel and allow user to reorder and group data without changing original values and orders.
    It allows to perform multi column sortings and grouping and
    supports following group functions: EMPTY, COUNT, MIN, MAX, SUM, AVG.
    Here you can download the library, demo version and documentation.
    http://zaval.org/products/swing/
    It would be great to know all your opinions.
    With best regards
    Stanislav Lapitsky

    About 1) and 3).
    These suggestions are almost the same. These features will change GUI component but i want to improve TableModel instead of JTable.
    Using the model user can use JTable for data representation.
    Of course I can improve JTable component and add multiline row/column headers with ability to reorder/group data from component and a lot of another widgets but it isn't my goal.
    About 2) What do you mean "crosstab"?
    Thanks for your 2-cents :-).
    With best regards
    Stas

  • XSL - Sort and Group?

    Hello,
    Anyone know if there is a way to do something like this?
    Original XML:
    <item>
    <word>word1</word><num>10</num><num2>9</num2>
    </item>
    <item>
    <word>word2</word><num>5</num><num2>3</num2>
    </item>
    <item>
    <word>word1</word><num>7</num><num2>6</num2>
    </item>
    I want to do something like group on <word> and sort accending on sum(<num>), min(<num2>) and end up with this:
    <item>
    <word>word1</word><num>17</num><num2>6</num2>
    </item>
    <item>
    <word>word2</word><num>5</num><num2>3</num2>
    </item>
    Is this possible?
    thanks,
    chad.

    Here's a start. See Chapter 9 of my book for a complete explanation of how to exploit XSLT keys like database functional indexes to make grouping operations like this be fast in XSLT. It takes a bit to wrap your mind around why and how it works and the book has figures that help illustrate this.
    <!-- chad.xml -->
    <list>
    <item>
    <word>word1</word><num>10</num><num2>9</num2>
    </item>
    <item>
    <word>word2</word><num>5</num><num2>3</num2>
    </item>
    <item>
    <word>word1</word><num>7</num><num2>6</num2>
    </item>
    </list>
    <!-- chad.xsl -->
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
    <xsl:key name="g" match="item" use="word"/>
    <xsl:output indent="yes"/>
    <xsl:template match="/">
    <list>
    <xsl:for-each select="list/item[generate-id(.)=generate-id(key('g',word)[1])]">
    <xsl:sort data-type="number" select="sum(key('g',word)/num)"/>
    <xsl:variable name="items-with-same-word" select="key('g',word)"/>
    <item>
    <word><xsl:value-of select="word"/></word>
    <num><xsl:value-of select="sum($items-with-same-word/num)"/></num>
    <num2><xsl:value-of select="sum($items-with-same-word/num2)"/></num2>
    </item>
    </xsl:for-each>
    </list>
    </xsl:template>
    </xsl:stylesheet>This produces the output:
    <list>
    <item>
    <word>word2</word>
    <num>5</num>
    <num2>3</num2>
    </item>
    <item>
    <word>word1</word>
    <num>17</num>
    <num2>15</num2>
    </item>
    </list>

  • Alv Sort and Grouping

    Hello Friends,
    I have made an ALV report where I am sorting on the second column which is a field called 'SUPPLIER_ID'.
    I am to group the supplier_id, so that only the first row shows the supplier id, and those rows with the same id should not be shown. But am having trouble with this.
    check  Supplier ID     field2  field3
               xxxxx            xxx    xxx
                                    xxx   xxx
                                    xxx   xxx
              xxxxxx           xxx    xxx.
    These are the steps I do in the code.
    1. I build the fieldcatalogue
    2. then I select the data
    3 . set the sort order
         DATA: x_sort TYPE slis_sortinfo_alv.
         CLEAR x_sort.
         x_sort-fieldname =  'SUPPLIER_ID'.
         x_sort-tabname   = 'GT_OUTTAB'.
         x_sort-up = 'X'
         x_sort-spos = 2.
         APPEND x_sort TO t_sort.
    4. Then I call the Reuse function.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         IS_LAYOUT                         = ls_layout
         IT_FIELDCAT                       = t_fieldcat
         i_callback_pf_status_set       = l_status
         i_callback_program               = l_repid
         it_sort                                  = x_sort
       TABLES
          T_OUTTAB                          = gt_outtab
       EXCEPTIONS
         PROGRAM_ERROR                     = 1
         OTHERS                            = 2
    But all the rows show the supplier ID, what am I doing wrong?
    best regards B
    Edited by: Baljinder Singh Gosal on Sep 29, 2008 2:36 PM

    types: begin of gs_outtab.
    types:
             SUPPLIER             TYPE ZSAM_LAC-SUPPLIER,
             SUPPLIER_ID        TYPE ZSAM_LAC-SUPPLIER_ID,
             SPEND                 TYPE ZSAM_LAC-SPEND,
             lights               type char1,
             color                type i,
             tabcol               type lvc_t_scol,
             id                   type char25,
             name                 type icon-name,
             symbol               type icon-id,
    end   of gs_outtab.
    data: gt_outtab type standard table of gs_outtab,
          wa_outtab  type gs_outtab.
    data: gr_container type ref to cl_gui_custom_container,
          gs_layout type lvc_s_layo,
          gt_fieldcat type lvc_t_fcat.
    perform display.
    form display.
        data: ls_layout   type slis_layout_alv,
              t_fieldcat  TYPE slis_t_fieldcat_alv,
               x_sort     TYPE slis_sortinfo_alv
              t_sort      TYPE slis_t_sortinfo_alv,
              l_status    TYPE slis_formname,
              l_repid     TYPE syrepid.
         REFRESH t_sort.
         REFRESH t_fieldcat.
         g_pf_status = 'SALV_STANDARD'.
         l_status = 'SET_PF_STATUS'.
         l_repid = sy-repid.
    Layout
         ls_layout-lights_tabname   = '1'.
       ls_layout-lights_fieldname = 'LIGHTS'.
         ls_layout-coltab_fieldname =  'TABCOL'.
       ls_layout-zebra = 'X'.
         PERFORM set_fieldcat2 USING:
    *pos fieldname          ref_field           ref_tab   len   noout  text_m   text_l   txt_s    reptxt  ddic  hotsp icon  chckbx edit  dosum  inttype symbol   tech     group fieldcat
    1   'CHECK'            'XFELD'              space     space space 'Select' 'Select' 'Sel'    'Select' space space space 'X'   'X'    space   space     space   space  space   t_fieldcat,
    2   'SUPPLIER'         'SUPPLIER'          'ZSAM_LAC' space space  text-hl5 text-hl5 text-hl5 space   space space space  space space space   space     space   space  space   t_fieldcat,
    3   'SUPPLIER_ID'      'SUPPLIER_ID'       'ZSAM_LAC' space space  text-hl4 text-hl4 text-hl4 space   space space space  space space space   space     space   space  'A'   t_fieldcat,
      perform get_data
      perform set_icons.
      perform set_order USING 'ORKLA_COMP_NAME' 'GT_OUTTAB' 'X' space space t_sort.
      CLEAR x_sort.
      x_sort-fieldname = 'SUPPLIER_ID'.
      x_sort-tabname   = 'GT_OUTTAB'.
      x_sort-up = 'X'.
      x_sort-spos = 1.
      APPEND x_sort TO t_sort.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         IS_LAYOUT                         = ls_layout
         IT_FIELDCAT                       = t_fieldcat
         IT_EXCEPT_QINFO                   = gt_exc
         i_callback_pf_status_set          = l_status
         i_callback_program                = l_repid
         it_sort                           = t_sort
       TABLES
          T_OUTTAB                          = gt_outtab
       EXCEPTIONS
         PROGRAM_ERROR                     = 1
         OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endform.                    " display_fullscreen

  • Audiobook sorting and grouping

    How do I group the audiobooks on a iPod nono G5. The same audiobook works perfectly on my iPhone, but when i add them to my iPod the books don't group and all the tracks are sorted by track names, so all the books are mixed in one long list.

    This is a very annoying bug which Apple do not seem to be addressing. If you look at the previous thread "Major Audio book problem ipod 5th gen" then you will find some workaround.
    Hope it helps

  • Sorting and grouping issue in WDP-ALV table

       lr_field->if_salv_wd_sort~create_sort_rule(
              EXPORTING
                sort_order        = if_salv_wd_c_sort=>sort_order_ascending
                group_aggregation = abap_true ).
    And while binding data, I'm sorting the internal table having data as below
    SORT wd_assist->gt_details_table(itab) BY bproc bsubproc function field ASCENDING.And output is as follows
    In the above snapshot, The sorting is getting disturbed on colunm: Function......
    But required output should be as below
    Pls help me how to achieve this?
    Thanks
    Katrice

    Hi Sandesh,
    When we use the SALV_WD_TABLE component to display ALV, by default, all columns are arranged in the same order as the attributes in the context node of your
    application.
    You need to add the following code in the wddomodifyview( ) method of your View.
    METHOD wddomodifyview
    data:lt_columns type salv_wd_t_column_ref,
            ls_column  type salv_wd_s_column_ref,
            lo_column  type ref to cl_salv_wd_column ,
            lo_ref_cmp_usage  type ref to if_wd_component_usage,
           lo_ref_interfacecontroller type ref to iwci_salv_wd_table ,
           lo_value type ref to cl_salv_wd_config_table.
    * Get  reference to the Component usage of the ALV.
    lo_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
    IF lo_ref_cmp_usage->has_active_component( ) IS INITIAL.
    lo_ref_cmp_usage->create_component( ).
    ENDIF.
    * Get reference to the Interface controller of the ALV.
    lo_ref_interfacecontroller= wd_this->wd_cpifc_alv( ).
    lo_value = lo_ref_interfacecontroller->get_model( ).
    * Get the Columns of the ALV
    CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
      RECEIVING
    value = lt_columns.
    * Get reference to each column and set the column position
    LOOP AT lt_columns INTO ls_column.
    lo_column = ls_column-r_column.
    CASE ls_column-id.
    WHEN 'VBELN'.
    lo_column->set_position('1').
    WHEN 'MATKL'.
    lo_column->set_position('2').
    WHEN 'POSNR'.
    lo_column->set_position('3').
    WHEN 'MATNR'.
    lo_column->set_position('4').
    ENDCASE.
    ENDLOOP.
    ENDMETHOD.
    Hope this helps you to resolve your issue.
    Thanks
    KH

  • Is it possible to have sorting by group and checkboxes in the same ALV

    Hi there,
    Does anyone know whether it is possible to have sorting and group on one field in ALV and checkboxes set on another field in ALV?
    eg.
    Fieldname
    ===========
    Name----
    Text
    Allowance----
    Numeric -> Sort & Group
    Verified----
    Checkbox
    How do I code it if it is possible to have grouping and check box all in one ALV.  Meaning I want some data that are the same to merge using sort, while still having the checkbox available for my other field (Verified).
    Thanks in advance.
    Lawrence

    hi,
    GROUP BY clause is used on database tables with select statement.
    sort is used on internal tables.
    can u clearly explain y u need group by and sort on the same field.
    if u are extracting from dbtable using grou by clause on a field, then no need to sort it again.
    if u want sort u can do it by giveing "sort itab by field". thats not a problem.
    now coming to check box.instead of using SLIS type field catalog, u use LVC type.
    in LVC_S_LAYO, u can fine box_fname.
    while defining layout, u declare a variable of type LVC_S_LAYO
    AND GIVE BOX_FNAME = internal table field name

  • Sorting and filtering by select-multi person or group field in the list in SharePoint 2013

    Hi everybody,
    In SharePoint 2013, I have defined a column as "Person or Group" field, which you allow for multiple selections. when I try to sort/filter it by this field in the list. The field doesn't show up in the dropdown. If I changed "Allow multiple
    selections" option to "No" by clicking the column name to edit it in "List Settings", the field can show up sort in the dropdown.
    How about support sorting and filter by select-multiple "Person or Group" field in sharepoint 2013?
    BTW, in SharePoint 2010, it can support this issue no matter what the "Allow multiple selections" option the request is.
    Any help would be great!
    Thanks,
    Jodie

    Hi Jodie,
    Can you please give this as a try.
    To fix the Filter Issue on Assigned To Column. We need to run the following scripts.
    The field which allows more than one values or which allows multiple selections. The multi-valued fileds are non-sortable,
    non-filterable. Multi-valued fields cannot be indexed
    $web=Get-SPWeb
    $list=$web.Lists[] $field=$list.Fields[ColumnName] $strSchema=$field.SchemaXml $str=Schema$strSchema.Replace("Sortable=`"FALSE`"","Sortable=`"true`"")
    $field.SchemaXml = $strSchema
    Krishana Kumar http://www.mosstechnet-kk.com
    Thanks for your reply, I have tried to run the scripts, but it still cannot work. The following is my scripts:
    $web=Get-SPWeb 'http://cst-server-01'
    $list=$.web.Lists["Product Request"]
    $field=$list.Fields["Applicant"]
    $strSchema=$field.SchemaXml
    $str=Schema$strSchema.Replace("Sortable='"FALSE'"", "Sortable='"True'"")
    $field.SchemaXml = $strSchema

  • Reporting Services Error after Interactive sorting and drill down in pps

    Hi 
    i have a report  that has a drill down option that shows all workgroups within a specific  parent group and an interactive sorting ass well on both columns  parent group &  workgroup 
    This is displayed  in pps combined with a SharePoint
    ---the problem is that after sorting the parent group column by name   i then press the drill through icon  (+) next to it hopping to see all workgroups related to each parent group
      - but instead 
    i receive this Reporting Services Error  :
    The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
    Online Help       
    If I don't press the sorting and just drill through it works fine. the sorting itself also works fine. 
    any suggestions ?
     

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • Having issues viewing interactive parameters and group tree in Visual Studio 2013 design view.

    Hey Guys,
    I'm a web developer (front end and back end, kind of a one man army sort of deal) and my current employer wishes to use crystal reports to display the results of the online survey apps/tools I have been working on for the last few months. However, I have been having trouble getting the reports to render in browser, and a lot of the ui components of the browser based report viewer (the interactive parameters and group tree) will not render properly in the design view of visual studio (ive attached a screen cap of what I'm talking about) or in the browser itself.
    I am new to crystal reports and its community and if I am leaving out any critical details or have posted in the incorrect section please inform me and I will make changes as necessary.
    Additional info:
    Visual studio version: 2013 professional (trial)
    Plugin version (exe file name): CRforVS_13_0_9.exe (I also installed the 64 bit run-time from this)
    Server and OS versions: IIS 7.5 on Microsoft Windows Server 2008 R2
    Any help you guys could provide would be greatly appreciated.
    Cheers,
    -Mike

    Hi Mike
    First thing you want to do is uninstall CRVS SP 9 and install CRVS SP 10. SP 10 is the first SP to support VS 2013.
    Once that is done, let us know if that helped any.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

Maybe you are looking for

  • Authentication Speed at a crawl

    Two days ago when my users (hs students) log in (LDAP), it takes now over 5 minutes for their desktop/dock to appear. Also, Server Admin on the local box will not launch, and sometime Server Admin from my laptop will not connect to the server. We did

  • Error message "SE 518 No account assignment exists for service li ne 000000

    Hi All, Customer is using SRM 7.0 Self-Service procurement Shopping cart created with multiple service items, once it approved. We get the Error message "SE 518 No account assignment exists for service li ne 0000000000" in Shopping cart Monitor. Coul

  • Adobe acrobat pro will not open 3 weeks after installing design web pro?

    I installed Design web premium on my computer and all programs work and adobe acrobat pro worked for 3 weeks and now it will not open.  I am at a loss. Help!!!

  • What to know the logic of this program :RV60SBAT

    i need to change this program based on my requirement , but i don't know the logic of this program ,there are some puzzles about the logic of the program. the requirement is that: when create the batchjob, the number of the batchjob is fixed , and th

  • Route Determination and Carrier

    I have been assigned to a project in which I need to set up route determination for all customers.  I have reviewed the documentation carefully, and understand the high-level configuration that is necessary.  However, one item I cannot seem to find i