PLEASE ADVISE BEST WAY TO HOOK UP AUDIO AND VIDEO TO OLDER TV WITH DVI INPUT

GOT NEW APPLE TV NEED TO CONVERT HDMI OUTPUT TO HOOK UP TO MY HDTV READY PROJECTION TV WITH DVI INPUT CONNECTOR
WOULD BE NICE IF YOU COULD JUST  EMAIL APPLE AND OTHER SIMILAR  COMPANIES LIKE MICROSOFT  ETC. SIMPLE QUESTIONS LIKE THIS WITH OUT FILLING OUT FORMS ETC

Officially DVI is not supported, but may work provided connections are HDCP compliant.
You will need an HDMI to DVI converter and as DVI does not support audio, a method of playing audio such as using AppleTV optical out instead to something capable of decoding the optical audio.
This is a user to user forum not an Apple led official support forum by the way.
AC

Similar Messages

  • What is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

    what is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

    When you export the videos out of iPhoto be sure to select Kind = Original.  Otherwise you'll just get an image file of the first frame of the video.
    OT

  • Some ways to lip sink audio and video ?

    Have shot a song of a music video ,audio is there during the shoot also....
    now what can be a nice way to match the audio of the footage and the real WAV audio clip on the audio track in FCPx ?
    I want to place the dance step clip in a close on the top of the....clip with same dance step in the long shot to see how it would look
    if I could exactly place the two similar audios on each other I would almost match the lip sink....
    but since waveforms are not distinctly visible I can't even take help of that...
    Can you suggest some ways of placing shorter shots on long shots to see the result or will I have to sink them purely on my visual judgement ?

    Select both clips, and go: File: New Mulitcam.. Bam!
    Make sure to give the clips seperate Camera Name and/or Angel.
    Make sure 'Use Audio' is selected.. but that is the default.

  • Screen Sharing, audio, and video chat not working with certain people

    My ichat application will suddenly stop working after just a few seconds of starting wither screen sharing, video chat, or audio chat. I get the error message "No data has been received for the last 10 seconds." How do i go about fixing this?

    Hi,
    This message can be caused two ways.
    1) a loss of Internet Connection through a Physical means.
    (turning Off Airport card, Pulling out Ethernet Cable, modem or router failure, loss of service from ISP)
    2) A router or modem Software intervention.
    This most commonly happens in Video chats. The device has a feature called DOS (Denial of Service) which with modern Internet Speeds and Video Streams gets to the threshold where it cuts in. It requires that you turn the feature Off as there is not adjustment in the threshold at which it works.
    A similar feature with a similar result is SPI (Stateful Packet Inspection).
    Having said that, it very unusual to have it effect Audio only chat or Screen Sharing.
    This means the issue could be at the Buddies end.
    NOTES:
    iChat creates Logs of Connection Failures of which there are about 5 types, caused by various issues in the connection Process.
    The 10 Sec Error message covers those things where the connect End but iChat did not receive a "BYE" message (a controlled End to the Chat) or get a failure of another sort.
    Basically you were connected properly (even if you did not hear or see the Buddy) and so other event cut the connection that was not iChat related.
    Can you do Video chats with any of the 6 names in Table 1 ?
    http://www.ralphjohns.co.uk/ContactTesters.html
    Some of those will respond to Audio Only invites.
    (I just tested 4 of them and three play music and one the Audio form the Jonathon Ive Video)
    Do any of those work ?
    That will exclude a Modem or Router Issue with DOS or SPI on the remote end.
    9:29 PM Wednesday; June 9, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • What is the best way to Install ilife11 iDVD and iWeb onto an iMac with Maverick

    Hi:
    I would like to purchase a new iMac. Since this does not come with iDVD or iWeb, I would like to install these two programs from my iLife11 DVD. Will this work?
    I assume I would have to do a custom install so I do not overide the newer versions of iphoto and iMovie? Is that correct?
    Will I perform the install in typical Mac fashion or do I have to do something special?
    Thanks a lot.

    There must a better way to do this. The problem is, YOU CAN'T UNCHECK IPHOTO in the installer. You pretty much need all the support files which you can't see in the installer, but you usually don't want iphoto.
    1 way to get around this is: Quit the installer if you launched it. Open the install disc > search = (any ilife app) > make visibility option 'invisible'. (if you don't know how, search invisible files in apple's help menu). run through the stuff to find a 'packages' (or some similar name) folder. Inside of that, I install everything except for what I don't want, which for me is the iphoto and imovie stuff.
    Still there must a better way, maybe you can create your own installer from the packages w/ package maker or something and burn that image... Worth trying...
    Please be assured that you will not get full integration between the current apps and the iLife apps in 10.9.x; Mavericks.  The apps don't have all the expected hooks to each other due end of product development. This seems to be the crux of the problems I've had testing to make an idvd dvd.
    If you're running 10.9, I recommend moving on to current replacements that will work as expected. That way you won't be wasting time running down project problems.

  • Adobe Presenter - audio and video

    Could someone please tell me the difference between adding
    audio and video to a PP presentation via PowerPoint vs. importing
    and adding audio and video using the Presenter tab?
    Also, I'm looking for a list of things that won't work when
    publishing. For example, I noticed that animations, slide
    transitions and QuickTime movies won't work after publishing.
    Thanks SO much.
    Leona

    Check out the documentation on Presenter -- there are some
    very specific ways you need to add audio (use "Record Audio" or
    "Edit Audio" in the Presenter menu) and video (use "Insert video"
    in the Presenter menu).
    Powerpoint has facilities to do these things as well, but
    Presenter won't be able to publish them, from what we've
    determined.
    For animations, again, read the documentation carefully --
    all your animations have to be set to "On Click" or "With Previous"
    -- i.e., they can't be timed animations. Again, Presenter won't be
    able to translate these timed animations -- you must "click" them
    into view (you do this as you're recording audio with "Next
    Animation", or you can do it after recording audio using
    "Synchronize Audio").

  • Audio and Video Performance Tweaking

    Hey guys I'm back with more questions.  I'm trying to improve the overall quality of my video conference experience.   My target market is the elderly and their families, so not necessarly people who are used to computers and tweaking things so we want to make it as good as we can right out of the box.
    Video
    1.)  All of my decoded video has clearly visible blocks.  I've attached a sample screen shot to show what I mean.  Is there a deblocking filter option I'm missing somewhere?
    2.)  The encoder in flash player 10.x is still H.263 based right?  I'm not missing a secret option to use the H.264 encoder am I?
    Audio
    1.)  I've set my audio codec to speex in my audio publisher, and it looks like it defaults to a quality setting of 10 (<rtc:AudioPublisher id="audioPub" codec="{SoundCodec.SPEEX}"/>).  Am I missing any tweaks to improve the audio quality?
    Audio questions where I assume the answer is no but I ask anyway
    2.)  Does the LCCS code or flash player prioritize audio packets over video packets or are they just sent when they're available.  I'd like to sacrafice video for audio if it's possible.
    3.)  Is there a way to better syncronize the video and audio streams.  Right now there's a lot of lag between what is said and how the lips move (this is even with peer to peer on the same private network).   I get the idea that there isn't but I thought I'd ask.
    4.)  Is there anything I can monitor to give me an idea of the current connection performance?   In otherwords can I monitor something and then make my own decicions to reduce the video quality or audio quality based on avaiable bandwidth between the two connected peers?
    5.)  You secretely have echo cancellation built in but were waiting till now to tell me right?  Just kidding.
    Thanks as usual
    -Eric

    Hironmay,
           Thank you for getting back to me, I know I asked a lot in one post there.   It would be nice to have a way for audio packets to be prioritized over video since they need to get there but  you can live with dropped video frames.   I'd love to see a way to sync the audio and video up as well.  I was just reading about some research where they showed if you can watch someones mouth move while you hear them talk it's equivelant to a 20dB volume increase (referrning to how well the person can understand you.)   I have elderly users so something like that is very important to me.
    I agree with you that when I changed the captureAndHeightFactor that the blocks got smaller, but did not go away.  I was hoping there was a way to smooth out the edges of the blocks so the boundries don't look so harsh.   I had been looking at flash.media.video in the flex 3.4 language reference and it talks about deblocking.  I copied the relevent text from the documentaiton at the end of this message.  I was wondering if there was something there I could use.   I'll play around with it some more.
    Believe me I've been very vocal about the need for echo cancellation on the Flash Forums
    Thanks for the help,
    Eric
    relevent text from flash.media.video
    deblocking
    property
    deblocking:intIndicates the type of filter applied to decoded video as part of post-processing.      The default value is 0, which lets the video compressor apply a deblocking filter as needed.
    Compression of video can result in undesired artifacts. You can use the       deblocking property to set filters that reduce blocking and,      for video compressed using the On2 codec, ringing.
    Blocking refers to visible imperfections between the boundaries      of the blocks that compose each video frame. Ringing refers to distorted      edges around elements within a video image.
    Two deblocking filters are available: one in the Sorenson codec and one in the On2 VP6 codec.      In addition, a deringing filter is available when you use the On2 VP6 codec.       To set a filter, use one of the following values:
    0—Lets the video compressor apply the deblocking filter as needed.
    1—Does not use a deblocking filter.
    2—Uses the Sorenson deblocking filter.
    3—For On2 video only, uses the On2 deblocking filter but no deringing filter.
    4—For On2 video only, uses the On2 deblocking and deringing filter.
    5—For On2 video only, uses the On2 deblocking and a higher-performance      On2 deringing filter.
    If a value greater than 2 is selected for video when you are using      the Sorenson codec, the Sorenson decoder defaults to 2.
    Using a deblocking filter has an effect on overall playback performance, and it is usually      not necessary for high-bandwidth video. If a user's system is not powerful enough,       the user may experience difficulties playing back video with a deblocking filter enabled.

  • Ichat audio and video problem

    my ichat audio and video don't work with any of my friends, no problems with a text chat, i'm using tiger and they all have leopard, all macs are up to date, i've tried messing around with the ports, firewall is off, internet sharing is off, i know a lot of people are having this problem, are there any answers to this that actually work, i'd appreciate any help

    Hi Ben
    Welcome to the  Discussion Pages
    Presumably you mean this Linksys is set to Not Block Pings on the WAN port (Or whatever phrase your device has) ?
    I also presume that you have done the Quicktime Setting that Steve mentions above ?
    I presume the Linksys is the modem as well and it is doing UPnP ?
    At this stage I have two suggestions.
    1)
    Shut down the computer and remove the Ethernet cable (modem or computer end does not matter) (Make sure it will not connect Wirelessly when restarted before hand)
    Restart the computer
    Restart iChat.
    Reconnect the Internet
    Log iChat in.
    2) Try a reinstall of the COMBO version of the 10.5.2 update
    Both of these suggestions have been used in previous iChat's when other things have not worked and the set up appears OK on the surface.
    Also try
    3) Rebooting the router and a Modem if separate.
    4) In System Preferences > Network > Connection method > Advanced Button > DNS tab add the DNS servers of your ISP
    DO them one at a time so you know which one works.
    8:26 PM Friday; February 29, 2008

  • What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?

    What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?
    I tried usb modems.  They worked ok for 32 bit usb's but Lion only allows 64 bit.  I bought one from Best Buy and it works when it wants to.  Mostly, it doesn't want to!
    Is there a way to connect through a time capsule?

    Thanks for that!! 
    Zoom - 56K V.92 USB Mini External Data/Fax Modem
    I didn't look any further than this.  I bought this at Best Buy and like I said, it works somesimes.  It does not trigger the fax automatically when the phone rings.  You need to have it manually answer.  In the past, I had the 32 bit Apple version of this external USB modem and it worked without issue.

  • Best way to hook a Mini display port to a vga projector AND a vga monitor

    I am looking for the best way to hook a Mini display port to a vga projector AND a vga monitor for use in a classroom, right now I am thinking a Mini displayport adapter to a splitter.

    The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
    Regards.

  • Best way to handle audio and video?

    Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
    Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
    Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
    http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
    Thanks for any help

    Yes that should work for what you want.

  • Best way to update AC97 audio drivers?

    Is the best way to update AC97 audio drivers = dl. from msi the latest drivers which are 5.10.00.5970 (A3.80) I currently have 5890. Then uninstalling old ones from add-remove programs then install newest ones. Since live update doesn't seem to get it done. Thanks
    Den

    I agree with the package that is in Dr Stu's link, I downloaded that complete package which includes NVMixer for speaker setup and fine tuning your sound system.
    Regards; Pop's

  • Best Way to Hook up 5.1 surround sound card

    Hey Guys -
    What is the best way to hook up the X-Fi surround 5. external sound card... Toslink or 6 channel dirrect (the 3 cables on both ends)
    It seems when I do 6 channel direct, the volume doesnt go up as high... but when I use toslink the volume goes way higher.... Also, playing Mp3, is there a way to get some better sound other then using stereo? Or am I stuck on this issue... I have the logitech z-5500
    Right now im using toslink, and it doesnt use the center channal... dar nit...
    thanks
    Message Edited by monkey23456 on 08-2-2009 08:07 [email protected]

    / Also... I cant play my 24bit/96khz flac files on this as well...
    P.S. Ive got my speakers connected to this via toslink...
    One more question... in control panel under speakers, do I select SPDIF output as default, even though im using the external sound cards SPDIF?
    thanks
    Ive heard vista only supports 48khz via SPDIF? is this why?

  • HT1386 I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set u

    I am setting up my daughter's 4th generation iTouch to replace her old one. Our family shares an iTunes account because my daughters are young. Does she have to have her own iTunes account in order to use FaceTime? Please advise best route at set up.

    She would need her own Apple ID, though not an iTunes Store account per se. This article will probably be of help:
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/
    Regards.

  • What's the Best Way to do an Audio Fade-In or Fade-Out

    I'm trying to figure out the best way to do an audio fade-out, other than placing a keyframe at the start of the fade, them placing a keyframe at the end of the clip and dragging it down to zero. It's hard to quickly place a keyframe at the end and know for sure it's at the very end.
    In previsous versions of Premiere, I had trouble plading a keyframe and keeping it at 100%, just by placing a keyframe it would also adjust the level most of the time.  This seems to be less of a problem in CS4, but is there a way to be certain of inserting a keyfram at the current level. (A quick way.)
    In general, there's got to be a quicker way to do a fade out or in!
    I have Premiere Pro CS4 with a Matrox RTX2 card.    
    There are only three audio transitions:
    Constant Gain
    Constant Power
    Exponential Fade
    I can't seem to make any of them work, cannot drag them over to an audio clip.

    Eddie:
    I had seen those instructions before.
    They say: To fade out a clip’s audio, drag an audio transition from the Effects panel to a Timeline panel so that it snaps to the Out point of the audio clip.
    When I try to drage one of the three avaialable audio transistions to a clip:
    Constant Gain
    Constant Power
    Exponential Fade
    Nothing happens.
    WAIT.
    I think I've got it now.  The "Snaps to the Out point" part.  Damn.  There was no visual feedback during the drag to indicate something was happening.
    OK.  (Whew.)
    Thanks!

Maybe you are looking for

  • How can you auto-accept Video Calls in Messages.app

    In Ichat there used to be a way to select a user and under "alerts" (which is no longer a perference option in messages) choose to auto-accept video calls from that person. Is there a way to set up Messages to auto acccept video calls? It was great f

  • HP LaserJet P1006 Print very slow with Windows 8.1

    I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I

  • System not starting after Unicode conversion:R3trans fails

    Hello We are performing a Unicode upgrade on an ECC 5.0 system. The ECC 5.0 is a MDMP System. After completing Unicode preparatory activities, we have started to perform a system export using SAPINST. Export completed successful. We started with the

  • Problem in Oracle 10g AS-

    Hi, I am using oracle 10g-AS and oracle 10g database. when i am trying to open report then the following error is showing- 500 Internal Server Error java.lang.NullPointerException      at oracle.reports.rwclient.RWClient.doGet(RWClient.java:285)     

  • Pleasehelp me with a problem(LT06).

    Hello, everyone        I processed Goods Receipt Purchase Order 4500000045 by MIGO and successfully created a material document 5000000091, then I tended to created Transfer Order for Material Document of 5000000091, but a message popped up saying yo