Please consider the following
People are getting bored of the same old iphone iPod and iPad structure you should be able to change it to fit your own personality. It would draw more attention to your product. By the way I have an iPhone 4
You're not addressing Apple here. Nobody from Apple reads these forums.
However you can send them a feedback here http://www.apple.com/feedback/
Similar Messages
-
I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?
If you have a support contract please open a case so we can work through
this problem.
Can you run an sqlplus session on your database, execute the commands
"delete from data_sync_item" and "commit", then resync to see if it will
get you around the problem. The data_sync_item table will be fully
populated after you sync. This should get you running.
Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
in size -- the CLOB would be smaller in the data_sync_item table.
I would recommend using the Version Checker against your installation --
find it on the dev2dev.bea.com site to see if the upgrade installer work
ed properly. Also consider running the full installer to avoid possible
problems that might occur with upgrade installers.
As a result of that patch you referenced in 4.0 the CLOB handling logic
was changed in 7.0 -- this is why it is strange you are seeing cleaving
errors. In 7.0 SP2 to be release next week the data sync and
persistence code was changed also.
Are you using the OCI or Thin driver?
-- Jim
Rob Goldie wrote:
Jim Litton <replyto@newsgroup> wrote:
Rob,
The CLOB issue was related to wlportal4.0 and should not be a factor
in
7.0.
Could you post the entire stack trace?
####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
<main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
please see the following exception for details.>
Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
to analyze and/or cleave document]
at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
at weblogic.j2ee.Application.addComponent(Application.java:294)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy9.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Caused by: org.xml.sax.SAXException: No message available. Resource not found:
repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
at weblogic.j2ee.Application.addComponent(Application.java:294)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy9.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Are you using a UTF-8 Oracle database?
Yes
If you create a new User Profile in the EBCC and compare it to your
migrated .usr file do you see differences in the DTD's?
I recreated a new version of the .usr in the EBCC, and still got the same error.
I also tried deleting everything from the data-sync-item table and re-synching.
What does the DocumentManager section of your application-config.xml
look like?
<DocumentManager
ContentCacheName="documentContentCache"
ContentCaching="true"
DocumentConnectionPoolName="default"
MaxCachedContentSize="32768"
MetadataCacheName="documentMetadataCache"
MetadataCaching="true"
Name="default"
PropertyCase="none"
UserIdInCacheKey="false"
/>
What does the document.jar Targets="" parameter look like in config.xml?
<EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
-- Jim
Rob Goldie wrote:
I get this exception (and long stack trace) when attempting to start
my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
using Oracle 8.1.7. I upgraded this application from weblogic portal
4.0, and never had this problem there. As part of the migration process,
I ran the tool to migrate all of the database tables, and I re-synched
the EBCC project using version 7 of EBCC. I did a search for this problem
and found a few mentions of it that seemed to be related to Oracle's
handling
of CLOB data. Apparently, there is a patch, but I can't seem to find
this patch. I'm also not sure if this is indeed the problem since I
didn't have this issue with the older version of weblogic using the
same database. Any suggestions? -
How do I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto"
Just popped up...grrtried that too. I rebooted and it was gone, mmh, but anyway glad it's gone
-
I am trying to finish the installation of Reader from Adobe Creative Suite 5.5 Design Premium and it will not let me proceed because it says "Please close the following applications to continue. Google Chrome.exe" , I don't have any Chrome applications open and I have even gone to Add/Remove Programs and removed Chrome from my PC. Still get error. Any advice?
ctrl-alt-del > start task manager > processes
-
Adobe Photoshop CC "Please Close The Following Application "
I seem too be having a problem installing Adobe Photoshop CC , everything was working great in the beginning , but as soon as I began installing it I had a message display saying "Please Close The Following Application " Which in this case is Adobe Illustrator. I already have it closed , even in task manager , I can't see the Illustrator.exe. Is there a work around this?
Often something will be held in memory and mess things up. For a long time Sonic DVD recorder would leave something going on with my work computer to the point that it would not fully log me off. Can't tell you how many security violations I got before I learned to completely shut down the computer each day.
-
Please clarify the following related to IACOR
Dear Experts,
Please clarify the following related to IACOR.
1 For using workflow, IACOR service should be active in ITS? T or F
2 Is sometimes IACOR activation is required to be done prior to publishing a service u2013 T/F
Regards,
RamakrishnaClosing this thread
-
Please clarify the following license issue
Hello
Please clarify the following license issue
Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
many thanks in advanceWhen you read through that thread, did you see where I linked to and quoted the licensing definitions
Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
Justin -
I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?
Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion -
Please install the following SDK...
Hi,
I installed the mobile packager + both Win Mobile &
Symbian S60 V3 SDK. However still after restarting my XP system and
opening the mobile packager tool I get the following message.
quote:
Please install the following SDK's to create a Symbian
Package * Symbian S60 V3 SDK
What should I do?quote:
Originally posted by:
benefit-ms
install Symbian S60 V3 SDK 262 MB not Symbian S60 V3 FP! SDK
ok, I'm a bit confused now. I have installed the following
ones
- S60-SDK-200634-3.1-Cpp-f.1090b.zip (as standard configured)
- S60-SDK-0548-3.0-f.3.215f.zip
But still no result in mobile packager. Where can i find the
256MB version? Could you pass us a link? -
Report Generator has failed, please send the following information to your
Hi I am trying to generate a report from Designer. I am getting the following error
Report Generator has failed, please send the following information to your support person
Assertion failure at crrma_bld_orapp at crrm.cpp:459
What should I do to get a report from Designer.
Thanks in advance,
Archnadanie,
please contact oracle support. this will most likely go beyond the scope of what we can do here in the forum.
thanks,
ph. -
I am having a problem installing Nikon Codec, software to view photos and get this error error message: Setup has experienced an error. Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache -
If your iCloud freezes when open system preferences, please do the following
If your iCloud freezes when open system preferences, please do the following.
(What i mean is the following, Settings>iCloud then it will freeze before you entering email, then follow the steps below)
turn off your iPhone.
log out from iCloud, in any device (Mac Book, iPad, iPod, PC, what ever, Remember any device that you may used the account there).
turn on your iPhone, and try now to log in to iCloud. ( you should be OK to log in, and you can type email now before it is hangs)
* if you tried these steps and you can type the email and password and it is still hanging after you click "Sign in" then you need to do the following.
create a new iCloud account from iCloud website with domain iCloud (for example, [email protected] , YOU SHOULD NOT USE OTHER DOMAINS LIKE GMAIL, HOTMAIL OR WHAT EVER TO CREATE THE ACCOUNT).
then go back and use the new iCloud email to log in in your iPhone. ( I hope by that time you will be OK (^_^)).
BEST WISHESFirst follow the instructions in this support article.
If the iPhoto library is the source of your desktop pictures, it may need to be rebuilt, or you may need to update the iPhoto application to the latest version.
Otherwise, continue as below.
Back up all data.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item. -
Why do I keep getting message "please close the following programs to continue Internet Explorer?"
Even when Task Manager indicates that Internet Explorer 10 is not running, I keep getting this message at 50% Adobe Flash Installation: "please close the following programs to continue Internet Explorer"
Use the Task Manager's Processes tab to end all iexplore.exe instances.
-
Updating InDesign "Please close the following applications to continue"
Hi! I’m trying to update InDesign through my Creative Cloud connection, but I get the following error message:
InDesign CC Update
Please close the following applications to continue:
- InDesign (Adobe InDesign CC)
Below this message are the buttons “Cancel” and “Retry”. Even though my copy of InDesign is not running, I still get this message when I click on the Retry button, and it continues to appear each time I select Retry. Clicking on Cancel has the same result: the error message will continue to appear!
Is there anything I can do to remove this message and update InDesign? On my CC Updater window, all my applications are show as being up to date, except for InDesign, which is show as “canceling”.
Thanks in advance,
Colin HartridgeClosing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/ -
Please close the following program to continue: "asuswspanel"
I am trying to re-install adobe flash player 11
I am using an ASUS laptop , with WIndows 7, 64 bit
Internet Explorer 10
Installation stops: Please close the following program to continue: "asuswspanel"
I do not what is this panel and how to close itUse the Task Manager's Processes tab to locate and end the process.
Maybe you are looking for
-
MBP bricked after servicing - Keyboard disconnected
Sorry ahead of time for the long story, but I appreciate any help and suggestions on what I could do about this. A few months ago (back in march) I had spilled a little bit of liquid on my 15inch mbp. The small spill area was on the bottom right hand
-
Starting to think I should take it to the apple store, however I want to see if anyone else has been having the same problem because so far touch id has been more annoying than useful.
-
5200: Error executing query: Invalid Item ID. Pls help
Hi i get this error above when i try to run a report from the workspace and it's specially for some reports. I use HFM 9.2, the database connection is configured correctly, and the user with the problem above (comes from msad) has all the rights, per
-
No administrator on my MacBook Pro. How can I fix this problem?
I have a Macbook Pro with OSX 10.9.4. I have only one account on my laptop. I was trying to block a website and while trying to do this I removed myself as the administrator on my computer. Now my account says managed, and to unlock settings to fix i
-
Using a PDF form to retrieve data from customers
Hi all, I am sure this can be done but since I am new to 'all this', I'm not sure how to pose or search for the answer properly. I want to use Acrobat to create a fillable form PDF so that I can send it out to customers. Once they fill the form out a