Please Explain GTT and Comcast Interaction

Anyone able to help with my question?
Thanks.

Would someone explain GTT's (Cogent, Zayo, Tata etc) interplay with Comcast's internet service? There is a website: https://www.battleforthenet.com/internethealthtest/ that shows internet speed for the five servers.  GTT is almost always 1/10th the speed of the four others.  When Zayo and the others give me 90Mbps, GTT has 5Mbps. I called GTT yesterday, and didn't really understand much, but the rep did say that Comcast/GTT for Miami area is 10 gig.  (As a comparison, Chicago was 50 gig.) The reason I ask is because I am having evening 4K Netflix issues lately where the signal on my TV drops to less that 5Mbps and won't pass anything bettter than 720 or 1080.  During daytime hours I get 16Mbps on the TV's Netflix 4K app. Thanks.

Similar Messages

  • Some songs i had on my ipad dont play anymore after upgrade to io7, a small red symbol comes on the right side, could please explain why and give me a solution, thank you

    some songs i had on my ipad dont play anymore after upgrade to io7, a small red symbol comes on the right side, could please explain why and give me a solution, thank you

    Miracle!!!!!!
    The iOS 7.1 update solved the WIFI issues on my iphone.
    I'll try to upgrade my ipad later on and then
    I think I can sell my hairdryer and my freezer.
    Thanks to the people @ infinite loop ;-)

  • Please explain Context and Occurrences

    Hello Experts in XI,
    Just i started learning XI but i am getting confussion in this Area  Context part  and Occurrences concept       with clear examples and clear explanation.
    Thank u,
    santhosh

    Hi Santosh,
    Please go through these links which clearly explains context and context changes in mapping.....
    http://help.sap.com/saphelp_nw04/helpdata/en/35/fb8c4057d5701de10000000a1550b0/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
    Regards,
    Madhu

  • Please explain when and why need to do Return PO

    HI experts,
    my doubt
    1) first i created PO using Me21n
    2)I never do GR (i never receive the stock from vendor)
    3) by using Me22n i changed to Return PO
    4) after that i do GR and the Mvmtype 161 automatically selected by the system
    4)And the stock is reduced based on Return PO stock
    with out doing GR how the Return PO reduce the stock
    Once i changed to Return PO and i do GR how the stock is returned to vendor
    please tell me abt this doubt
    actually where and which case we can do Return PO
    thanks
    ganesh

    > 4) after that i do GR and the Mvmtype 161 automatically selected by the system
    Now Cancel the 161 Material Document / Do + 1 then Material will come into Stock.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/26/ce653a5aa1ed49e10000000a114084/frameset.htm
    Please Go thru the above link for Return Po Reasons.
    The Return PO Process Would be :
    Create a Return Purchase Order with Return Item Indicator.
    Make a Goods Receipt against the Return Po of which 161 Movement will automatically takes Place.
    Create a Excise Invoice for Other Movements Using J1IS & J1IV (If the Material is Excisable)
    Create a Credit Memo.
    Regards,
    Ashok

  • Please Explain JCMON and functionalities

    Respected Guru's,
    Please help in knowing the purpose of command JCMON, further should the instance be up or shutdown when we execute JCMON.
    Please give links for explannation,
    Regards,
    Daya

    The JCmon is a native monitoring program, part of the startup and control framework. It can be used for:
    ·        Display a list of the processes
    ·        Enable, disable, and restart the specified processes
    ·        Shutdown a specified J2EE instance
    ·        Enable/disable debugging for a specified process
    ·        Dump stack trace
    ·        Display a list of the ports used by the J2EE Engine
    ·        Activate/deactivate debug sessions
    ·        Increment/decrement the trace level
    more details at: http://help.sap.com/saphelp_nw70/helpdata/EN/27/ff074152aff323e10000000a155106/frameset.htm
    regards
    Mahesh

  • Please explain ranking and partition?

    I'm familiar with basic SQL and PL/SQL.  I've encountered the following clause in a query, which I don't understand:
       SELECT...
                 T1.valueA,
                  T1.dateValue,
                 T1.valueB,
                T1.dateValue_2,
                 IsCurrent  
        FROM (SELECT
                decode(row_number() over (
                        partition by T1.valueA order by T1.dateValue asc), 1,DECODE(sign(T1.dateValue - sysdate),1,'N','Y'), 'N') as IsCurrent
                             ,  'N' as IsCancellable
                  ,dense_rank () over ( partition by T1.valueA  order by  T1.valueB desc, T1.dateValue desc, T1.dateValue_2 desc) as rank
          FROM T1    etc...

    Your query must be very old - pre case era - or ...
    I'd rather see something (at least IMHO) more readable, maybe
    select ...
           t1.valuea,
           t1.datevalue,
           t1.valueb,
           t1.datevalue_2,
           iscurrent 
      from (select case row_number() over (partition by t1.valuea order by t1.datevalue asc)
                        when 1
                        then case when t1.datevalue > sysdate
                                  then 'N'
                                  else 'Y'
                             end
                        else 'N'
                   end iscurrent,
                   'N' iscancellable,
                   dense_rank () over (partition by t1.valuea
                                           order by t1.valueb desc,t1.datevalue desc,t1.datevalue_2 desc
                                      ) rank
             from t1
    as a non native speaker I doubt I can beat the documentation (seems pretty good to me):
    Analytic Functions DENSE_RANK
    Regards
    Etbin

  • Someboby please explain about web administartion in obiee 10g

    In presentataion services----->settings--->administration--->Oracle BI Presentation Services Administration...
    please explain each and every activities and marketing.......
    THANKING YOU IN ADVANCE......
    Edited by: 980227 on Feb 28, 2013 6:01 AM

    Help file, look for ? icon at is a good start, look for the same at
    presentataion services----->settings--->administration--->Oracle BI Presentation Services Administration
    If helps mark
    Edited by: Srini VEERAVALLI on Feb 28, 2013 8:37 AM

  • Can someone explain AirPort Express and iPhone interaction?

    Is it possible to use the iPhone along with an Airport Express? Is there any interaction between these devices? For example can I use the iPhone to control music playback through the Airport Express?
    thanks.

    Nathan,
    Thank you for your reply but can you please provide more details? I'm really confused over Airport Extreme vs. Airport Express vs. Air Tunes and how this all interfaces with the iPhone. Can you please explain these devices? I also saw a post from someone stating they could control wireless music playback via their iPhone, how is this possible?
    Edit: See the post by Mike Kelley at http://discussions.apple.com/thread.jspa?threadID=1159025
    How is he doing this? Is he using Airport Extreme or Airport Express or Air Tunes?
    Message was edited by: EricC617

  • Enqueue and Dequeue consept----Please explain urgent

    hi all,
    i want to use sap locking mechanisn (Enqueue and dequeue consept) while updating database table....please explain how to use this while updating a database table.
    Thanks in advance
    Nandha kumar

    Nandha,
    Good document on this concept..
      Activating a lock object in the ABAP Dictionary automatically creates function modules for setting (ENQUEUE_<lock object name>) and releasing (DEQUEUE_<lock object name>) locks.
    The generated function modules are automatically assigned to function groups. You should not change these function modules and their assignment to function groups since the function modules are generated again each time the lock object is activated.
    Never transport the function groups, which contain the automatically generated function modules. The generated function modules of a lock object could reside in a different function group in the target system. Always transport the lock objects. When a lock object is activated in the target system, the function modules are generated again and correctly assigned to function groups.
    Parameters of the Function Modules
    Field Names of the Lock Object
    The keys to be locked must be passed here.
    A further parameter X_<field> that defines the lock behavior when the initial value is passed exists for every lock field <field>. If the initial value is assigned to <field> and X_<field>, then a generic lock is initialized with respect to <field>. If <field> is assigned the initial value and X_<field> is defined as X, the lock is set with exactly the initial value of <field>.
    Parameters for Passing Locks to the Update Program
    A lock is generally removed at the end of the transaction or when the corresponding DEQUEUE function module is called. However, this is not the case if the transaction has called update routines. In this case a parameter must check that the lock has been removed.
    Parameter _SCOPE controls how the lock or lock release is passed to the update program (see The Owner Concept for Locks). You have the following options:
    _SCOPE = 1: Locks and lock releases are not passed to the update program. The lock is removed when the transaction is ended.
    _SCOPE = 2: The lock or lock release is passed to the update program. The update program is responsible for removing the lock. The interactive program with which the lock was requested no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
    _SCOPE = 3: The lock or lock release is also passed to the update program. The lock must be removed in both the interactive program and in the update program. This is the standard setting for the DEQUEUE function module.
    Parameters for Lock Mode
    A parameter MODE_<TAB> exists for each base table TAB of the lock object. The lock mode for this base table can be set dynamically with this parameter. Valid values for this parameter are S (shared), E (exclusive) and X (exclusive but not cumulative).
    The lock mode specified when the lock object for the table is created is the default value for this parameter. This default value can however be overridden as required when the function module is called.
    If a lock set with a lock mode is to be removed by calling the DEQUEUE function module, this call must have the same value for the parameter MODE_<TAB>.
    Controlling Lock Transmission
    Parameter _COLLECT controls whether the lock request or lock release should be performed directly or whether it should first be written to the local lock container. This parameter can have the following values:
    Initial value: The lock request or lock release is sent directly to the lock server.
    X : The lock request or lock release is placed in the local lock container. The lock requests and lock releases collected in this lock container can then be sent to the lock server at a later time as a group by calling the function module FLUSH_ENQUEUE.
    Behavior for Lock Conflicts (ENQUEUE only)
    The ENQUEUE function module also has the parameter _WAIT. This parameter determines the lock behavior when there is a lock conflict.
    You have the following options:
    Initial value: If a lock attempt fails because there is a competing lock, the exception FOREIGN_LOCK is triggered.
    X : If a lock attempt fails because there is a competing lock, the lock attempt is repeated after waiting for a certain time. The exception FOREIGN_LOCK is triggered only if a certain time limit has elapsed since the first lock attempt. The waiting time and the time limit are defined by profile parameters.
    Controlling Deletion of the Lock Entry (DEQUEUE only)
    The DEQUEUE function module also has the parameter _SYNCHRON.
    If X is passed, the DEQUEUE function waits until the entry has been removed from the lock table. Otherwise it is deleted asynchronously, that is, if the lock table of the system is read directly after the lock is removed, the entry in the lock table may still exist.
    Exceptions of the ENQUEUE Function Module
    FOREIGN_LOCK: A competing lock already exists. You can find out the name of the user holding the lock by looking at system variable SY-MSGV1.
    SYSTEM_FAILURE: This exception is triggered when the lock server reports that a problem occurred while setting the lock. In this case, the lock could not be set.
    If the exceptions are not processed by the calling program itself, appropriate messages are issued for all exceptions.
    Reference Fields for RFC-Enabled Lock Objects
    The type of an RFC-enabled function module must be completely defined. The parameters of the generated function module therefore have the following reference fields for RFC-enabled lock objects:
    Parameters
    Reference fields
    X_<field name>
    DDENQ_LIKE-XPARFLAG
    _WAIT
    DDENQ_LIKE-WAITFLAG
    _SCOPE
    DDENQ_LIKE-SCOPE
    _SYNCHRON
    DDENQ_LIKE-SYNCHRON
    Pls. reward if useful

  • Please explain me how I can use Form feed(\f) and Carriage return(\r)

    what is Form feed(\f) and Carriage return(\r)?
    Please explain to me.
    Thank you.

    These control characters aren't used much these days except that if you example a Windows or MSDOS text file in a binary editor you'll find each line ends with "\r\n". However when reading or writing text through classes these carriage returns will be added and removed automatically so your program doesn't see them.
    The controlls date back to teletype machines which operated rather like typewriters. Cariage return, as it's name implied, caused the print head to move back to the start of the line, line feed advanced a line (without, necessarilly, returning the carriage) and formfeed skipped to the next page.
    Newline on these machines was always "return, linefeed" because executing the carriage return on these machine could take too long. The early machines had only a single character buffer so that they had to executed the characters as quickly as they arrived. So doing the linefeed after the carriage return gave the carriage more time to return. On some teletypes if you did "linefeed, return" then the first character of the new line would often be printed somewhere in the middle of the line.
    This is the origin of the MSDOS/Windows end of line sequence.
    Many printers will still respect formfeed if printing is direct. Some will take carriage return without linefeed to allow you to start again overprinting the same line.
    However printing, these days, is seldom direct but done in bitmap form.

  • Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port.

    Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
    Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
    I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
    So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
    Thank you!

    First make sure that no application is using or has open any files on the disk. Then:
    Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
    Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
    Here is a detailed help document on the subject.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get

    I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get my library out of the cloud and keep them on my computer so they are available when I want them? Wow.......why have you made everything so difficult now?

    SKF5656 wrote:
    I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back.
    No you didn't.
    Now everything is in the cloud
    Except for anything you did not purchase in iTunes Store.
    Only you iTunes purchases are in the cloud.
    Reada the article that brenden dv posted to copy your iTunes library to new computer.

  • In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE!

    In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE! Thank god Pages 09 is still there.

    …and the other 98 missing features.
    Just use Pages '09, which should be in your Applications/iWork folder.
    Rate/review Pages 5 in the App Store.
    Peter

  • Could someone please explain what P to P and Order to Cash cycle?

    Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

    Hi,
    Pl.visit following links for P2P cycle.
    http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
    http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
    http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
    and visit following links for O2C cycle.
    http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
    http://www.youtube.com/watch?v=2GhAbWGz7iA
    http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
    http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
    http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
    HTH
    Sanjay

Maybe you are looking for