PLEASE FIX CURRENT BUGS!

I shoot with canon equip. and have issues importing and transfering files to cs2 for editing. And I wonder what else will pop up in the not so distant future. But I blew $200 on this program to make my workflow easier and it's created more problems than what I had before. I didn't have this issues with bridge,so why is lightroom so buggy if you had a program already to base it off of? Sorry. I'm stepping off my soapbax now.

On Canon iporting issues see
Lightroom Journal and the Adobe TechNote cited there.
George Jardine:
>This problem will be fixed in an upcoming release.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Similar Messages

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size.

TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy

Adobe, please fix these bugs/features in Muse

So, here are a couple of really annoying things/bugs that keep happening in Muse.
(I've been working with the software for about three weeks, latest Muse CC update, on a MBP Retina, OS X 10.9.5, NVIDIA GeForce GT 650M 1024 MB + 16 GB 1600 MHz DDR3)
1. When I try to hit "Preview" and browse my website, the links to other pages than the initial one don't work, and you need to go back to the "Plan" and open each one of them individually, and then hit "Preview" in all of them, in order to be able to browse the entire website without getting blank pages.. Is there any way to come around this, and be able to set Muse to render ALL of the pages before previewing the website?
2. When I try to adjust the sizes of thumbnails in a slideshow, and zoom in on guides, it's IMPOSSIBLE to make them align perfectly to ANYTHING! The thumbnails just keep moving and popping around, and they don't follow the mouse movements at all, they just make rough changes in sizes and are very hard to work with. It doesn't matter if I zoom in 800% for example, things don't move or adjust smoothly at all, like in Illustrator for example.
3. Sometimes, it's impossible to copy a slideshow- it just freezes, even if I click down and select the thumbnail box. It seems like a bug, since the copy function comes back after I quit and restart the software, or just make a new slideshow from scratch and then delete it (seems to re-set something, I don't have a clue). The "copy" button under the "Edit" menu is simply shadowed out.. Why is that? It would be really nice to be able to alt-click-drag-and-drop these things, especially when you try to build a portfolio.. But, this is impossible for me, at the moment- the plus-sign in the green circle pops up, but it just moves the thumbnail section, it doesn't copy it..
4. Is there ANY way to make all slideshow thumbnail sections moveable? Even if they have the option "Free Form Thumbnails" deselected? What if I need to move lots of galleries on the same page, that need to have different form options selected, for visual reasons? At the moment, I can't select all different thumbnail galleries on my page, and move them all at the same time, which is quite irritating..
5. When I click a thumbnail in the middle or at the end of the gallery, there's a fast flash of previous images in the gallery, before the chosen image is shown fullscreen. Is there any way to get rid of this unwanted visual glitch? I just want them all to open like the very first image in the gallery, without any ghosting of previous images.. I have the horizontal swipe effect in these galleries, if that makes any difference..
6. Is there any way to make custom adjustments to thumbnail sizes, inserting a fixed width and height? Or, save a slideshow as a template, to use the same properties in another gallery?
7. Will it ever be possible to have different sizes of thumbnails in the same slideshow? What's the best way to make a gallery in a portfolio with artworks of different aspect ratios?
8. Why is not my embedded Youtube videos included when I export the project like a html-file? There's only a broken link/code in the video area, at the moment.. Will this be a problem later, when I really need to upload it on my server?
9. Is it not possible at all to import svg-files in a slideshow? Why is it possible in external widgets, but not in the built-in slideshow widget? I can place and import svg-files into the page, but not drag or import them to the slideshow itself..
I really like Muse, but I find it very hard and irritating to work with lots of times, so please fix these issues, or tell me how to avoid them, thanks!

A BIG THANK YOU for taking the time to share your thoughts regarding how to improve Muse. I've interspersed comments and clarifications below.
1. When I try to hit "Preview" and browse my website, the links to other pages than the initial one don't work, and you need to go back to the "Plan" and open each one of them individually, and then hit "Preview" in all of them, in order to be able to browse the entire website without getting blank pages.. Is there any way to come around this, and be able to set Muse to render ALL of the pages before previewing the website?
There are multiple ways to preview your work when using Muse.
Preview Mode - When you click the Preview button at the top right to open Preview Mode Muse will generate the HTML, CSS, JavaScript, images and assets for the page in the front Design view (or the Home page, if you're not in Design view) in the Preview tab/window. If you navigate to a different page by following a hyperlink Muse will generate the code for that page and display it. This in-app preview uses the OS browser, so the display uses Safari on the Mac or IE on Windows. Since the code for each page is generated/updated when it's navigated to, navigation to a page for the first time is slow.
Preview Page in Browser - If you select this option the code for the current page is generated and opened in your default browser. If you follow a link to another page, it will fail with a 404 file not found error, since this option only previews a single page. It's fast, but limited to one page.
Preview Site in Browser - If you select this option the code for your entire site will be generated and your home page will be opened in your default browser. You can freely navigate between pages via hyperlinks, since the preview exported the code for all the pages of your site. This option is very convenience for previewing your full site, but is much slower for a multi-page site than Preview Page in Browser.
Publish - If you select this option you can create a free temporary website on Adobe hosting. This is very handy when you want to view your site on multiple devices or have someone else review the site before you Publish or Upload the site to its production hosting location.
2. When I try to adjust the sizes of thumbnails in a slideshow, and zoom in on guides, it's IMPOSSIBLE to make them align perfectly to ANYTHING! The thumbnails just keep moving and popping around, and they don't follow the mouse movements at all, they just make rough changes in sizes and are very hard to work with. It doesn't matter if I zoom in 800% for example, things don't move or adjust smoothly at all, like in Illustrator for example.
The web is pixel based. There are (mostly) no fractional amounts. While you can zoom in, ultimately your output will be aligned (and limited to) whole pixel boundaries.
When working with thumbnails, the ramifications of working in whole pixel based media are magnified. For example, if you're using tiled thumbnails and have an 8 wide layout the total width will have to be a multiple of 8. You can only increase all 8 by whole pixel increments.
3. Sometimes, it's impossible to copy a slideshow- it just freezes, even if I click down and select the thumbnail box. It seems like a bug, since the copy function comes back after I quit and restart the software, or just make a new slideshow from scratch and then delete it (seems to re-set something, I don't have a clue). The "copy" button under the "Edit" menu is simply shadowed out.. Why is that? It would be really nice to be able to alt-click-drag-and-drop these things, especially when you try to build a portfolio.. But, this is impossible for me, at the moment- the plus-sign in the green circle pops up, but it just moves the thumbnail section, it doesn't copy it..
If Muse is truly freezing, we'd need to understand more about the steps involved. What I expect you're encountering is the fact you can copy and paste an entire widget, but you cannot copy and paste the individual parts of a widget. If you select the widget cut and copy are enabled. If you click a second time to select one part of the widget, then cut and copy are disabled. Most the widgets don't support having two parts of the same type (i.e. two next buttons, two sets of thumbnails, etc.) so at least copy and paste can't currently be supported. Those are limitations we'd like to remove, but for now they are the current limitations when working with widgets.
4. Is there ANY way to make all slideshow thumbnail sections moveable? Even if they have the option "Free Form Thumbnails" deselected? What if I need to move lots of galleries on the same page, that need to have different form options selected, for visual reasons? At the moment, I can't select all different thumbnail galleries on my page, and move them all at the same time, which is quite irritating..
I believe you're asking to be able to simultaneously select the thumbnail sets for multiple slideshow widgets? You're correct, that's currently not supported. The selection model is limited to selecting items that are siblings in the Layers panel. You can select two slideshow widgets, but not the parts inside one widget at the same time as the parts inside another.
5. When I click a thumbnail in the middle or at the end of the gallery, there's a fast flash of previous images in the gallery, before the chosen image is shown fullscreen. Is there any way to get rid of this unwanted visual glitch? I just want them all to open like the very first image in the gallery, without any ghosting of previous images.. I have the horizontal swipe effect in these galleries, if that makes any difference..
Noted as a feature request. When the sliding transition was implemented the most common ask was for the current behavior, so that's what's provided. Fade provides a transition between two images without any feedback of the images that were passed over.
6. Is there any way to make custom adjustments to thumbnail sizes, inserting a fixed width and height? Or, save a slideshow as a template, to use the same properties in another gallery?
Given the next question is about setting each thumbnail to be a different size, I'm not sure I understand this question. You can select a thumbnail and enter height and width values in the Transform panel or Control Strip. However, all thumbnails share the same size, so all of them will be updated to the new size. Not sure that answers what you're asking?
[edit: Zak] Regarding the second half of this question, a slideshow (or any other object or collection of objects) can be saved in the Library and used again in later projects.
7. Will it ever be possible to have different sizes of thumbnails in the same slideshow? What's the best way to make a gallery in a portfolio with artworks of different aspect ratios?
When "Scale to Fit" is used for the sizing of the thumbnails, they will appear with the aspect ratio of the original image sized to fit within the thumbnail container box.
8. Why is not my embedded Youtube videos included when I export the project like a html-file? There's only a broken link/code in the video area, at the moment.. Will this be a problem later, when I really need to upload it on my server?
Insufficient information here to be certain, but I suspect you've exported to a local folder and then opened the index.html (or other .html) file in your browser? When open a file directly in your browser "file://" protocol is used. Many/most services such as YouTube won't work on a .html page loaded using "file://" protocol. That's part of why Muse has a built-in mini-web server and the Preview, Preview Page in Browser and Preview Site in Browser features, which server up the .html files using "http://" protocol. Or you can Publish to a free temporary site on Adobe hosting.
9. Is it not possible at all to import svg-files in a slideshow? Why is it possible in external widgets, but not in the built-in slideshow widget? I can place and import svg-files into the page, but not drag or import them to the slideshow itself..
Correct. Support for SVG was recently added for Muse 2014.2. Support for including SVG graphics in slideshows was not part of the initial release.
In the future, while it may seem excessive, it's much more effective to create a new thread for each different issue/concern/topic you wish to discuss. When a thread starts with a large number of different topics it often goes unanswered because no one forum member or Adobe staffer feels qualified to respond to all the questions. Or, if it does get responses, it ends up being impossible to follow the discussion because so many different topics are intermingled. Thanks.

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support.

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

Please Fix This Bug - Mac Version CS4

Mac OS 10.6.3 (bug has been around a while)
Mac Pro
Flash CS4 10.0.2.566
Open up Flash using the Designer workspace (it can be any workspace, though).
Now select Import so the OS X file dialog appears. Drag the dialog to be longer vertically so you can see more files listed. Select Cancel.
Now drag the divider between the timeline and the stage down to be bigger vertically so you can see more Layers in the timeline.
Now select Import and watch the file dialog spawn from the top of the stage, move down, hit the bottom of the screen, and shift your entire workspace. This is a bug. It shouldn't do this. Try fixing this weird anomaly at the top of your screen where it's a gap in the interface and you can't see the top part of the workspace.
How long has Flash been out and this bug still exists?
Steve Jobs was right. Adobe is lazy, though Apple's own Final Cut Studio has its share of ignored bugs, so he has no room to talk.
I suppose I'm going to have to buy CS5 to get a bug fix...or it will carry over. I remember when Macromedia was around creating competition. The consumer benefited from that competition.

Have you reported this bug? Based on the series of steps you need to create this scenario, it is possible no one else has encountered it, so it may not have been addressed at all. It probably has nothing at all to do with laziness on Adobe's end, though they are unlikely to release a new version every time a newly discovered bug gets arises.
suggestions to Adobe - Wishlist
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Apple: Please fix your bugs NOW!!

We have been reporting lots of FrontRow bugs in this forum for months. Is Apple planning to ever fix any of them? We want these bugs fixed now, in Tiger, we dont want to have to wait, and pay, for Leopard to get any fixes for basic functionality problems. Does this bothers anybody else? Or is it just me???

I agree. Frontrow is pretty good, but there's a lot of ways it can improve. One thing I really don't like is that to get to a certain point in a slideshow you have to browse through all the photos before it first. So, what happens when you want to start playing music half way through your slideshow? You have to go start up the music and then return and browse through all the photos all over again. Apple, hurry up with the fixes. Also, to anyone else who wants to tell Apple how to improve something, such as frontrow, go to http://www.apple.com/feedback/. There is no section there for frontrow itself, so I would recommend writing your frontrow comments in the OSX feedback section.
-Eric

Avoid MathScipt Comments in EXE, Build & Run Problems - NI Please Fix these Bugs!

Hello,
After 4 days of intensive work, I have finally found the solution for two major MathScript Problems:
1) Mathscript Comments are included in your EXE File !!
    - Yes, if you do not watch your steps, the EXE will include all your % Mathscript Comments!
2) Problems building, but even worse: An app that builds with NO Error and NO Warnings will not RUN and creates the following misleading Erro Message:
    "The VI is not Executable. The full development version of LabView is required to fix the errors"
    With absolutely NO hint to what VI have the problem.
I have made myself an internal note how to avoid this problem. I am using LabView 2009, 2010 DS1 Release (I think this is 9.01) under WInXP SP2.
Rather than retyping everything, I will post the full text of my Notes below. I also mention several other LV BUG in this note, so pleae read carefully.
One is the TagSrv Error that occurs in LabView 2009 if I programatically deploy Shared Variables under the WinXP Development Environment. After this problem has occured, it will occur every time I restart XP, and in essense I have to restore to before I did this (thanks Nortong Ghost !!!).
Below you can find the full unabridged version of my Build, Run and Bug Notes for LV 2009 / 2010 DS1 (9.01). Hope they can be helpful to my fellow LabView programmers!
2010-07-03:
Building under LabView 2009 / 2010 DS1 Release (version 9.01)
Follow the steps below:
a) To successfully build an EXE that also runs
b) Avoid that MathScript Comments are included in the EXE !!!!!!!!!!!!!!!!
Before Building:
I) Recompile All by pressing Ctrl+Shift and pressing the RUN button on the Application_References.vi
   Then Save All (about 1200 Vis are saved)
II) Make Sure that NO User Defined Mathscript (and Mathscript Nodes?) define Empty Functions:
    This seemed to cause the following problem with the built EXE: The main VI will be broken, and a dialog reports:
    "The VI is not Executable. The full development version of LabView is required to fix the errors"
    MathScitp BUG: Empty Functions causes no Build Errorm but RUN Error:
    The following User Defined MathScript .m files are candidates:
    log_write() and log_clear() whith do_log_write() and do_log_clear() commented out, these functions are empty.
    When calls to log_write() and log_clear() where removed, the problem above vanished !
Building the EXE:
1) Additional Exclusions:
-"Disconnect type definitions": YES
- "Remove unused polymorphic VI instantces": YES
- "Remove unused members of project libraries": NO (do not know if this is important)
2) Advanced:
- Enable Debugging: "NO"
3) Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE if you use the New Build File Layout:
   IMPORTANT !!!!!!!!!!!!!
   Advanced:
   "Use LabView 8.x file layout": YES !!!!!!!
   Using the new layout, causes ALL COMMENTS FROM USER DEFINED MATHSCRIPT .M FILES TO BE INCLUDED IN THE .EXE !!!!!!!
4) BUG: DSC Reference Problem in LabView 2010 DS1 release:
   In VI Deploy_Shared_Variables.vi we deploy alle Shared Variables using the "Deploy Libraries.vi" which is a part of the DSC option.
   As long as only deploying of Variables is used, using this VI should NOT require any DSC Runtime license.
   We have used this before with no compilation problems.
   However, starting with LV 2009 SP1 (or was it the DS1 2010 upgrade) LV will start nagging us to resolve references to tens of VIs
   in the DSC lib file ! Solution: Used press "Stop" on the dialog, and the Build will succeed and the EXE will work !
   Optionally, we could use the following Invoke node for the deployment:
   (see: http://digital.ni.com/public.nsf/allkb/04D9A85B6967EE87862571140065EEC6). Excerpt from this description:
<<Right-click the block diagram to bring up the programming palette and go to Programming»Application Control and place the
    Invoke Node on the block diagram. Using the hand tool, click Method and select Library»Deploy Library>>
5) LabView BUG: Do NOT RUn the Application under the WIn XP SP2 Development Environment if the APP Deploys Shared Vars:
   This will cause the Dreaded TagSrv Error: "TagSrv.exe: This application has requested the runtime to terminate in an unusual way".
   After this Error has occured, it will reoccur each time WinXP SP2 is restarted, and (Network) Shared Variables will NOT work any more!
Geir Ove
Attachments:
LabView_Tagsrv_Error.jpg ‏26 KB

Hello Geir,
I have tried to reproduce the behavior you are seeing where .m file comments appear in the final built executable. However, I am unable to do so using LabVIEW 2009 SP1. I have a caller VI with a MathScript node that calls the adder function in adder.m. The contents of adder.m are as follows:
% ADDER This function adds 3 to its input variable
%   y = adder(x)
%   INPUT: x
%   OUTPUT: y, equal to x + 3
function y = adder(x)
y = x + 3;
I have configured the build specification as you mention in steps (1) and (2):
Additional Exclusions
- "Disconnect type definitions" Yes
- "Remove unused polymorphic VI instances" Yes
- "Remove unused members of project libraries" No
Advanced
- "Enable Debugging" No
At first, I did not include the adder.m file in the project. I built the application and was not able to find the text "adder" anywhere in the EXE. Then, I added the .m file to the project and put it in the "Always Included" section in "Source Files." Again, I was not able to find the search text in the built EXE. In step 3, you mention
geirove wrote:
   "Use LabView 8.x file layout": YES !!!!!!!
but in the 5th post in this thread, you state
geirove wrote:
Compile using the new compile method ( Use LabView 8.x file layout": NO),
I have tried both settings in the Advanced section, but again, I am not able to find any comments in the EXE. I even added a call to the "path" function in adder.m. This puts a warning glyph on the caller MathScript node and generates different code. The EXE will return an unknown symbol error for adder (any VI with a warning glyph will not work in a built app), but I am not able to find any comments in the EXE. This project is attached below.
As for your other item with a broken EXE if you call empty functions, I am unable to reproduce this as well. I have taken the last attachment to your third post in this thread (the log_write function) and called it from the caller VI as well. The EXE runs just fine and I do not find any comments in this EXE either.
Unfortunately, there was a rather serious issue in the LabVIEW 2009 MathScript RT Module, where some internal MathScript VIs could become corrupted when building executables. Have you tried running the "Find Bad Instantiations" tool from this Knowledge Base article? Simply installing the SP1 version on top may not have corrected any VIs that may be corrupted.
Due to our difficulty in reproducing the issues you mention, could you modify the attached project or else attach a new project, appropriately configured, that builds an EXE with .m comments embedded in it? This way, we can uncover any minute details that we're overlooking.
Grant M.
Senior Software Engineer | LabVIEW MathScript | National Instruments
Attachments:
MComments.zip ‏186 KB

Can you please fix the bug where firefox continually collapses addon buttons into the "more tools" dropdown? Your continued ignoring of the bug is incompetent.

No further details needed. 140 people saw an archived report of this a year ago.
Fix the problem already.

A year ago Firefox had a different user interface, so a comparison isn't accurate.
Usually caused by an extension or two - not directly by Firefox itself. Try moving the add-on buttons into a different order or disable them one at a time to find the culprit.

ATTENTION APPLE - PLEASE FIX THIS BUG !!!

I know Apple knows of the issue when working with 720p 24p material generated from a HVX200 camera. For instance if I add a title over the media then render ... it jumps my original material 1-3 frames ahead. Its worse when you add a cross dissolve .... it jumps 2-3 frames in resulting in a "hick-up" effect. I guess people have found a work around by re-importing everything and I guess re-cutting stuff but this should'nt be the solution. The SOLUTION should be that Apple fixes this issue ASAP! No?

That is the exact solution I gave you over the phone. They did a few things differently (and I find better, as a matter of fact) but in essence it is what I adviced you to do.
This is the learning curve. This is why you never EVER update mid project. This is a lesson. One that you will never forget. I can't tell you how many times something has happened during an upgrade that caused problems...so often that everywhere I work people won't do anything until projects are done. Unless they need to upgrade to fix something, and if that fixes it but causes a new problem, then you have to deal with it and put in man hours to fix it.
And no, you cannot bill Apple. If Avid was hit with the hours of pain and reworking it caused, it would have gone out of business long ago.
And this is a case of "take responsibility for you actions." You chose to upgrade mid project, even though we have advised against it numerous times on this board in hundreds of threads...and on other FCP boards as well. Just because you didn't know not to, doesn't make Apple liable for your mistake. It was a mistake...and one you have to fix. This happens. Mistakes happen all the time, and I have made my fair share of doozies. But I don't blame Avid or Apple for them. I may yell and scream at them, but it was my mistake for not knowing that what I did was what I wasn't supposed to do.
Sorry man. Long days ahead of you.
Shane
Elitist

Apple, please fix this bug

Playing a music video as a song, (no video) the sound breaks exactly every 2 minutes for about a sec and a half and continues for another 2 minutes. Doesn't matter what firmware is installed.
This is very disapointing.
(The same file, played as a video, not a song, works flawlessly with no interruptions.)
AMD 2.4 Ghz Windows XP Pro 1 Gb Ram Ipod 5g Black 60 Gb

To save power. To avoid duplicates of music videos and similiar audios. On version 1.0, you can turn off the backlight for videos, not anymore for 1.1.
I found that is drop out period varies depending what s/w and rate the video was used.
It definitely be nice to get that working.
Al

After upgrading to 6.1.3 yesterday photocamera from iphone 4 not focus. why? please fix bug!!!!

After upgrading to 6.1.3 yesterday photocamera from iphone 4 not focus.Whi ? please fix the bug !! and the battery is draining faster !!!

This is almost embarassing. For some totally unexplainable reason all the songs in iTunes were unchecked. I was considering syncing the whole iTunes library to my iPnone, tut even with the 32 Gb version it would not hold it all. I restarted my MBP, and the message about the unchecked songs came up. It obviously is not enough to have songs checked for the iPhone. Thanks anyway.

Adobe: Please fix the spacebar cut in multi-camera editing!!

Dear Adobe,
Please fix the BUG which makes a cut in your multi-camera sequence when you hit the spacebar! This is extremely annoying!!
Thanks!
Former FCP User
- Ryan

(imagine the opening of Thriller with the door creaking open and footsteps...you've awoken a sleeping giant...well, not sleeping, recovering actually)
Hi TacoRye.
Welcome to the club. When I saw this post, my eye twitched, my shoulders tensed up and I was brought back to a time (http://forums.adobe.com/message/4714549#4714549) when hitting stop did things that were wrong...just wrong. But as one who's been shut down and locked out of that topic, I'll kindly say that yes, multicam is a bit more enjoyable and free of that design flaw in Premiere CC. In fact, you'll probably like it for a few more things in CC as it's true that they have implemented several FCP favorites in the recent releases that even old schoolers probably say "hmmm, well now this is useful". I was a convert to CS6 from FCP this time last year and open to new things but that stop/pause issue drove me nuts. But it's fixed now in CC. And although I'm dealing with equally frustrating issues in CC on a daily basis unrelated to multcam, unless you use Warp Stabilizer a lot you probably won't experience them. All new software will have its bugs, etc. and I'm still holding out hope that the upcoming release will fix these issues. I have faith. Lots of exciting new features are coming in the next week or so which is all nice and good, but if the actual issues and bugs are fixed, I for one will be even happier.
Bottom line: I encourage you to update to Premiere CC if you do a lot of multicam. Just be sure to update to at least 7.0.1 (the current version as of this post) because the regular 7.0.0 version has a pretty awful multicam bug unrelated to the CS6 thing.
Enjoy...and don't be scared.
(exit with sound of that guy from Thriller laughing...door shuts)

How about fixing the bug report submission page ?

I've been trying for I think the 11 time to submit a bugreport to bugreport.sun.com and each time,
the submission FAIL. And of course you loose everything you entered in the page.
Email to the address specified when it fail also FAIL.
rejected by the server for the recipient domain sun.comby userp1020.oracle.com. [156.151.31.79].
The error that the other server returned was:
550 5.1.1 <[email protected]>... User unknown
Please Fix, a bug report page that can't even submit simple text its ridiculous.
This is not the first time I have difficulties getting your site to work.

You're complaining to the wrong people.
Re: bug database does not work?
OTN forum admin are not responsible for the java bug reporting. They cannot fix what isn't theirs.
Locking this thread

PLEASE FIX CURRENT BUGS!

Similar Messages

Maybe you are looking for