Please help for me fake profile !

Hey!! I would like to report this man who's been using may name and photo and my videos for his personal intention. Here are the account name victor_ricar Please do some action to prevent him using my name and personal informations and he is trickin girls with my videos.He have already my camera videos and he is using this like me ! Please email me as soon as you read this .. Here is my email [e-mail removed for privacy and security]
Please! I badly need your help. I have family and im preaparing for marry ! please...

if (playerTurn = false) {should be
if (playerTurn == false) {and so on..

Similar Messages

"Please Wait For The User Profile Service" message when logging on to TS 2008

I have a Windows 2008 AD Domain with 2 Windows 2008 Terminal Servers. Both are configured identically. I have the TS Roaming profiles stored on a 3rd server and a GPO pointing all users to the roaming profiles. On one of the servers everything works perfectly. On the second server the users, after they input their credentials, get the following message "Please Wait For The User Profile Service". The message can stay there for up to 3 minutes, then they are logged innormall with the correct profile. This problem does not occur on log off. Any help would be appreciated

99% of the times I had this problem it was caused by either DNS issues or network bindings.
Are your servers multihomed? In other words: do you have multiple network cards? If so, make sure your "production" card is on top in the network connections -> advanced settings -> adapters and bindings.
You could also enable user env logging (search microsoft how to do that)

Please help for my iphone 4 unlock

please help for my iphone 4 unlock

Apple store said my iPhone 4 had an LCD issue and that is why slide to unlock is frozen. My warranty ran out so it would cost approx. $150 to repair it he said. Time for a new phone but not sure I want another iPhone now.

Please Help for the Query

Please Help for the Query
Hi frds please help me for the below query.What I want to do is to pull out the data from below table :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/18/2008 3IINFOTECH -4
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
as such :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
Here I want to find the Trend i.e either asc or desc order from the lowest indicator.
In the above sample data -8, -4, -5, -3 out of which I want the asc order data -8, -5, -3 and exclude -4 data.Because the asc order -8, -5, -3 will not follow.
So I want the data
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3

SQL> CREATE TABLE BORRAME(FECHA DATE, INDICA VARCHAR2(100));
Tabla creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/13/2008','MM/DD/YYYY'), '3IINFOTECH -8');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/18/2008','MM/DD/YYYY'), '3IINFOTECH -4');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/25/2008','MM/DD/YYYY'), '3IINFOTECH -5');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/27/2008','MM/DD/YYYY'), '3IINFOTECH -3');
1 fila creada.
SQL> COMMIT;
Validación terminada.
SQL>
SQL> SELECT FECHA, INDICA
2 FROM BORRAME
3 WHERE SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) <> '4'
4 ORDER BY SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) DESC;
FECHA
INDICA
13/03/08
3IINFOTECH -8
25/03/08
3IINFOTECH -5
27/03/08
3IINFOTECH -3

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online ??? any one else having troble?? please help I need my mail

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online>???
any one else having troble??
please help
I need my mail

Hello, DragonStudios.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Jason H.

Please help for User defined extension functions

the tutorial given for extension functions doesn't work as well as our new functions
even though i follow all the given steps and see the functions in my user defined extension functions tab in xslt map.
all the target nodes that use the extension function disappear in the resulted target xml.
please help.

have you compiled your java file and uploaded the jar file(containg the .class file and the Manifest.MF file) in the <OC4J_HOME>\j2ee\home\applib directory and then restarted the server??

Please help for using perform in SAP script

As subject.
My sap script code as below:
/: PERFORM GET_CHAMT_DATE IN PROGRAM ZRAP004
/:USING    &SPELL-WORD&
/:CHANGING &SPELL-WORD&
/:ENDPERFORM
My program ZRAP004 code as below:
FORM get_chamt_date USING u_iword TYPE spell-word
                   CHANGING u_oword TYPE spell-word.
CONCATENATE u_iword '元整'(t01) INTO u_oword.
endform.
This form is for check printing.
It's by standard function 'F110' to excute check printing.
But when i finished this transaction. System return error message as below:
<b>This routine contains 2 formal parameters, but the current call
contains 4 actual parameters.</b>
Please help. Thanks a lot!!

Hiii
PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
       INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
       INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
      w_vbeln LIKE vbak-vbeln,
      w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
           input = w_ebeln
      IMPORTING
           output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.

Please Help for this scenario

Hello,
Suppose i have a input xml:
<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>
Now I want output as:
<Header>XYZ</Header>
<Body><![CDATA[<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>]]>
</Body>
Please help how will I do that......whole payload is going in Body also some value in above payload is mapping.
Can anyone give me UDF to send whole payload in one node
Thanks and Regards
Hemant

this can be achieved easily by aXSLT mapping....also can be achieved by using grahical mapping
For XSLT coding:
creation of CDATA with message mapping
For graphical + XSLT: /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Abhishek.

Kind Attn:OTN Customer Team PLEASE HELP FOR LOGIN

I have seen lot of members are facing login problem with old username/password.
I am facing the same.I am unable to login with old username/password "dmewani/*******" .Please reset my account.
even after coping "username/password" from email received from "orcle", problem is same.
Please Help.

Hello,
Thanks for your help. Yes this could help but as I already has the licencees, I just need someone at Adobe's who could generate the keys ,... but after hours between Adobe and my reseller ; each one says to contact the other I'm getting crazy ...
Aynwas, thanks very much for your help

Please help for my unexpected shutdown W510!!!

Since I used my W510 ( 43192NU with Windows 7 32bit ) from April 2010, I did experienced with unexpected shutdown. First, I thought it was my improperly use. But now, it shutdown unexpectedly even 3 times a week. Did anyone got the same experienced? Please help me...

I have the same exact problem!!!
And it drives me crazy.
It happens only when my battery is charging (that is, it's not at 100%).
If the battery is fully charged, and I'm on AC power as well, all works o.k., but as soon as the battery is low (say 50%) and I plug it in, and put some load on the system (using VMware a lot) it runs for a while then dies instantaneously. No gradual shut-down - just shuts off.
It just happened again a few minutes ago, and I lost an important VMware file.
I called Lenovo support a few months ago, and they wanted me to send the laptop in for a week to make sure there is really a problem.
Any other input/comments would be appreciated.
BTW, I purchased the W510 in February 2010.

Please help for ORA-02049 - Timeout error

Hi All,
we have got a reporting DB and 14+ Application DBs, the data is extracted from all the application databases (DBs) and dumped into the common tables of reporting database. While inserting and updating the common reporting tables the other jobs gets timeout error and fails. We daily face this failure problem (error: ORA-02049 - Timeout error distributed transaction waiting for lock) for almost 10-15 times.
Can you please help me out in resolving and getting the permanent solution for this problem.
Thanks in advance.

Thanks Kamal,
as mentioned above, I have got Oracle,Java,Unix environment. Autosys jobs are scheduled through out the day.
Mechanism : Autosys job triggers the action at specified time, Unix code calls oracle packaged procedure, extracts data and puts into the common reporting table from this data java code formats the report output.
There are separate reporting jobs for all instances though the report is same but for different locations(14 DB instances).
and all these reporting jobs dump data into common reporting table, data can be differentiated on the hub or location.
But if one job is running for first instance then second job waits for the lock and fails after 2 mins.
I have to avoid this situation, I hold I am able to explain the situation.

Please help for Registration point to a movieclip/sprite

I am new to AS3 and have a doubt on Registration point for
Movie clip / Sprite. Please help me the sample code for this
I simply draw a line using AS3 in flash environment. but i
used graphics.moveTo for center. but if i run this it is simply
taking x,y axis 0,0 and move around the stage. I want to move this
from center of the stage. please help.
below is my code
var line:Sprite = new Sprite()
addChild(line);
var cx:Number = stage.stageWidth/2;
var cy:Number = stage.stageHeight/2;
var radius:Number = 1;
var increase:Number = 0;
line.graphics.lineStyle(1, 0xff00ff);
line.addEventListener(Event.ENTER_FRAME, onEnter);
function onEnter(event:Event):void
increase += radius;
//trace(increase);
//line.graphics.moveTo(cx, cy);
line.graphics.lineTo(cx + increase, cy + increase);
line.rotation += 0.1;

to appear to control the registration point of line, make it
a child or an empty display object and offset it by -x,-y where x,y
is your choice for the apparent registration point. you can then
control the parent object and it will behave like your line with
changed registration point.

Please Help for RME fireface400 with Logic Studio 8

Please I do ask help for configuration of audio interface RME fireface400 with iMac OS 15.5.5, I have problem in output 7/8 monitor phones(no sound or crack sound) and look Fireface Mixer in to the desktop monitor. Where is the problem? I have drive 2.62a.
Thanks for answer, also in Italiano
Graz

Have you tried the RME userforum?
http://rme-audio.de/forum/index.php
Maybe you problem is running OS 15.5.5 - must be a beta version

Please help for some reason i cannot slide to unlock my ipod

please help i cannot get my ipos to slide to unlock

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

SQL experts please help for a query

I have following table1.
What query can give the result as given below, SQL experts please help on this.
TABLE1
Event DATETIME
in 2/JAN/2010
out 2/JAN/2010
in 13/JAN/2010
out 13/JAN/2010
in 5/JAN/2010
out 5/JAN/2010
RESULT REQUIRED FROM THE SQL QUERY
COL1_IN COL2_OUT
2/JAN/2010 2/JAN/2010
13/JAN/2010 13/JAN/2010
5/JAN/2010 5/JAN/2010

I tried to help, but this puzzles me.
Why is this not returning pre-selected set of rows, why it's doing some merge join cartezian ?
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from table1;
EVENT      DATETIME
in         2/JAN/2010
out        2/JAN/2010
in         13/JAN/2010
out        13/JAN/2010
in         5/JAN/2010
out        5/JAN/2010
6 rows selected.
SQL> explain plan for
2 with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
Explained.
SQL> set wrap off
SQL> set linesize 200
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 185132177
| Id | Operation            | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |        |     9 |   288 |     8   (0)| 00:00:01 |
|   1 | MERGE JOIN CARTESIAN|        |     9 |   288 |     8   (0)| 00:00:01 |
|* 2 |   TABLE ACCESS FULL | TABLE1 |     3 |    48 |     3   (0)| 00:00:01 |
|   3 |   BUFFER SORT        |        |     3 |    48 |     5   (0)| 00:00:01 |
|* 4 |    TABLE ACCESS FULL | TABLE1 |     3 |    48 |     2   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   2 - filter("EVENT"='in')
   4 - filter("EVENT"='out')
Note
   - dynamic sampling used for this statement
21 rows selected.
SQL> with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
COL1_IN         COL2_OUT
2/JAN/2010      2/JAN/2010
2/JAN/2010      13/JAN/2010
2/JAN/2010      5/JAN/2010
13/JAN/2010     2/JAN/2010
13/JAN/2010     13/JAN/2010
13/JAN/2010     5/JAN/2010
5/JAN/2010      2/JAN/2010
5/JAN/2010      13/JAN/2010
5/JAN/2010      5/JAN/2010
9 rows selected.
SQL>

Please help for me fake profile !

Similar Messages

Maybe you are looking for