PLEASE HELP LENOVO T61 ERROR RESOURCE CONFLICT PCI MESSAGE

HELLO LENOVO HELP GROUP.
WOULD LIKE SOMEONES HELP IN SORTING OUT A PROBLEM I HAVE ON STARTUP. I HAVE THE LENOVO T61. WHEN I START IT UP AND AFTER THE THINKPAD START MESSAGE I GET THE FOLLOWING ERROR MESSAGE....
ERROR
RESOURCE CONFLICT - PCI ON MOTHERBOARD
BUS 15, DEVICE: 00 FUNCTION 00
ERROR
RESOURCE CONFLICT - PCI SERIAL BUS CONTROLLER ON MOTHERBOARD
BUS 15, DEVICE 00 FUNCTION 01
ERROR
RESOURCE CONFLICT - PCI ON MOTHERBOARD
BUS 15, DEVICE: 00, FUNCTION 05
ALSO I DID A SYSTEM RESTORE WHILST I HAD THIS PROBLEM AND IN THE PAST IT USED TO BE SUCCESSFUL BUT AFTRE THE LAST SYSTEM RESTORE ALOT OF THE PROGRAMMES INSTALLED STOPPED FUNCTIONING.
THESE INCLUDE SOME OF THE FOLLOWING:
UNABLE TO USE SYSTEM RETSORE ONLY IN SAFE MODE
UNABLE TO USE DEVICE MANAGER TO CHECK WHERE THE ERROR IS
UNABBLE TO USE WINDOW UPDATE
WINDOW EXPLORER KEEPS PLAYING UP
WIRELESS ADAPTER STOPPED WORKING BUT AFTER DOING SYSTEM RESTORE IN SAFE MODE IT WORKS.
SOME OTHER PROGRAMMES LIKE PALTALK HAVE STOPPED.
I HAVE BEEN ON THE GOOGLE AND READING VARIOUS BLOGS ON THIS ERROR FORUMS. SOME SAY TO TAKE OUT THE INTERNAL MEMORY BATTERY FOR A COUPLE OF HOURS AND OTHERS TAKE OUT THE WIRELESS ADAPTER AND THEN CHECK TO SEE IF THE ERROR PERSISTS. IF NOT THEN RE - INSTALL THE WIRLESS ADAPTER AND HOPEFULLY I WOULD NOT GET THE MESSAGE AGAIN.
PLEASE CAN YOU HELP ME. WOULD APPRECIATE SOME HELP FROM THE KNOW HOWS AND HOPE TO HEAR FROM YOU SOON.
THANKS
SOL
MY GADGETS DISSAPEARED FROM THE DESKTOP.

pm sent

Similar Messages

PLEASE HELP : Lenovo T61 recovery

hi,
I have tried to install windows XP in my lenovo T61 laptop. during that i havent deleted the hidden service partition, but i deleted the partition that contained windows vista. Currently XP is installed, but i want to get vista back , what is the dos commands that will allow me to view the hidden partiton and then enable me to run the vista setup from it ?
Thank you for support.

There is no DOS command that I know of.
There is a repair diskette that can fix it but it requires a floppy drive.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Satellite PRO P200 (PSPB7E): LAN trouble Resource Conflict - PCI Network

Hey,
I have a Satellite PRO P200 and I have some trouble with the lan. (not the wireless one).
When I plug in the network cable, the system want start at all. The blue power let turns on and that's all tha happens.
If i turn the portable off, unplug the cable and turn it on, it starts, but the network adapter is no longer installed.
I already downloaded the Realtek driver for Vista 32 bits from the website, but no difference.
The driver is actually not recognized as being a right driver for the device. I have select the driver manually from a list (using have disk etc..) to get it installed. After the re-installation all the settings of the network adapter in Vista or gone, it always on dhcp.
I already had a blue screen (vista dump), while installing the device.
And an error:
Resource Conflict - PCI Netword Controller in slot 08
Bus:04, Device:00, Function:00
Press <F1> to resume, <F2> to setup.
I also tried to turn of the lan as third boot device, but it automaticaly turns on again.
I also tried to update the bios to the latets version, it succeeded (no problem at all), but it did not solve my problem.
Any idees?
hardware failure?
I guess it's not possible the switch the lan device?

Hello
I have read many stories here but your one is really unbelievable. I do not know what is wrong there but try to enter BIOS settings and set it to default. After doing this install OS using recovery media.
Now you you will have clean preinstalled OS and your notebook will have factory settings. Please test the LAN card functionality again. If the problem persists you need professional help.

Resource conflict- pci network controller in slot 09

hi there!
im looking for help with this problem which ive had for teh last 3 months.
basically one day, when i turned my laptop on it didnt log straigh into windows, it came to a screen that said
'resource conflict - pci network controller in slot 09'
press f1 to resume , f2 to enter setup, f1 would take me to windows and f2 to bios.
after this my wireless card dint work, so i ended up buying an external one which i used. now i decided to format thinking it would help the situation, but no luck. ive looked around on the net asked alot of friends but no one seems to be able toi give me a solution. is there anybody who could tell me what to do?
thanks
lefteris

I have the same problem im my lap (ThinkPad R50e) and i perform the following steps to resolve
F1 --> Config --> Network --> Disable --> F10
then repeat the same steps but enable network
F1 --> Config --> Network --> Enable --> F10
it working fine with me

PLEASE HELP! Installation errors with creative suite 5.5 design premium?

I recently tried to install creative suite 5.5 design premium on to my home computer with windows vista home premium and it was all going fine then right at the end of the installation this message popped up please help??
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 14 error(s), 4 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
                Family: Photoshop
                ProductName: Adobe Photoshop CS5.1 Core_x64
                This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
                Family: InDesign
                ProductName: Adobe InDesign CS5.5 Icon Handler x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Player for Embedding x64 3.1
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: Shared Technology
                ProductName: Photoshop Camera Raw (64 bit)
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeCMaps x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Linguistics CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobePDFL x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: AdobeTypeSupport x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                Family: CoreTech
                ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
                Family: Adobe Web Suite CS5.5
                ProductName: Adobe Media Encoder CS5.5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Dreamweaver CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Photoshop CS5.1 Core depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Illustrator CS5.1 depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe InDesign CS5.5 Application Base Files depends on Adobe CSXS Extensions CS5.5 to be installed.
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

i tried all the thinks listed and uninstalled then reinstalled creative suite 5.5 design premium and yet again this showed up at the end please help it mean nothing to me help!
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 8 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5.1 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5.5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64 3.1
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.9E3C8AP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Design Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {BD85DFD4-005F-4219-8E27-C922CC4D8A61} Adobe CSXS Extensions CS5.5 2.5.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\CS5.5ServiceManager\lib\CSXS-Installer-Hook.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 130)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 130)
----------- Payload: {4C08199E-0D93-4227-8325-F024E71CA7A1} Adobe SING CS5 3.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\SING\Mark II\SING.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
----------- Payload: {5BDE0A1B-35BF-4224-A54F-73786EECDFC1} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_GBLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_GBLanguagePack\OEM(Seq 74)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5.5: Install failed

Please HELP Lenovo G410 Cursor Problem

Please help, iam experiencing a very annoying problem with my new lenovo G410 cursor behavior. At some time my cursor always jumps to another arear. for example when iam typing, at some time the cursor go to another area of the screen, and this really disturbs and annoy. is there anybody who is experiencing this too.... is there any silution for this? thx vry mch...

Hai,
If you still have mouse pointer moving when typing, following tips may help from what i experiances before.
Some optical mouse required a mouse pad for it's working properly. it's depend on mouse quality, if u do not have mouse pad on your mouse, some mouse will detect motion error on your tables.
If you do not have mouse pad, pls use a white paper put under your mouse and try it.
Turn off your Touchpad, because when u typing, your hand may be disturb Touchpad area and its mouse point will moving. because touch pad is a sensetive part if something put under it. (Refer to your Fn key to turn on/off touchpad)
Nicholas K.H.Chai
Malaysia
YM: ckhown

Please help with cfscript error!

When I run my app, I got this error:
sdfst_catcherror is recording this error: Context validation
error for tag cfscript.; The start tag must have a matching end
tag. An explicit end tag can be provided by adding
</cfscript>. If the body of the tag is empty you can use the
shortcut <cfscript .../>.
The CFML compiler was processing:
a cfscript tag beginning on line 45, column 4.
a cfscript tag beginning on line 45, column 4.
When I checked my codes, all the
<cfscript></cfscript> have the pairs. There are only 2
pairs of <cfscript</cfscript> in this template.
See my code structure below:

<cfscript>
function getTRS(var5)
some codes here...
return TRS;
</cfscript>
<cffunction name="FrmTxt" returntype="Struct">
<cfargument name="EmpCodes" required="true"
type="array">
<cfargument name="EmpID" required="true"
type="numeric">
<cfquery name="GetEmpInfo>
Select * from......
</cfquery>
<cfset varFrms = GetEmpInfo.EmpCodes>
<cfset A_Key = 1>
<cfset structFrmTxt = StructNew()>

<cfscript>
Some codes here....
Need to output #TRS# returned by getTRS(var5) set above
</cfscript>
<cfreturn structFrmTxt>
</cffunction>
From other CF forum I learned that I can't put getTRS(var5)
within the second <cfscript></cfscript> within
<CFFUNCTION> pair
it says "You can't put UDF within UDF or method within
method". When I did originally, I got this error:
Unable to complete CFML to Java translation, Error
information unsupported statement: class
coldfusion.compiler.ASTfunctionDefinition
I'm stuck and can't find any resources to solve this problem
anymore, please help!....

When I checked my codes, all the
<cfscript></cfscript> have the pairs.
This error can often mean that you did not properly end a
previous code
block or line. So the closing </cfscript> is being
considered part of
that unclosed code. For me, it is often a missing semi-colon
[;] on the
last line I wrote, missing a closing curly bracket [}] could
do it as well.
Check your code, this is seldom more then missing a bit of
syntax.

Please help with custom error messages

Hello,
I am trying to display my own error messages for the <f:validate_required /> validation.
Here is what I tried:
-in my faces config xml file, I have:
<message-resources>
<message-resources-id>myResourceID</message-resources-id>
<message>
<message-id>javax.faces.validator.RequiredValidator.FAILED_MESSSAGE_ID</message-id>
<summary xml:lang="en">No name was entered</summary>
</message>
</message-resources>
-in the jsp page, I have:
<h:input_text id="name" valueRef="person.name" >
<f:validate_required />
</h:input_text>
(below:)
<h:output_errors id="myResourceID" for="name"/>
It is not displaying my custom error message ("no name was entered") but the default error messages.
Please help!!
Juju

Unfortunately, the current version of the reference implementation does not pick up replacement messages from <message-resources> elements yet. This will be corrected prior to the next release.
Once that is done, the original proposal will work if one change is made -- all of the standard validators pick up their messages from a standard message resources identifier, so you will need to change to:
<message-resources-id>
javax.faces.context.FACES_API_MESSAGES
</message-resources-id>
instead of your own message resources identifier.
Craig

Please help with this error: "Your request could not be completed because of a disk error"

So photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!

mistahbo1 wrote:
…I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free. I am getting very frustrated. Please help!
That's woefully inadequate for scratch file space.
The rule of thumb I follow says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 300 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
Additionally, if either one those two drives you mention with "16 GB free and the other with 8 GB free" happened to be your boot drive, you'd be in a heap of trouble because neither one of those drives has nearly enough space to accommodate the swap files of the OS and Photoshop's scratch.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I have 16 GB of RAM installed:

Please Help!! Error in document : BKPFF $ DEVCLNT

Hi All Gurus,
I am trying to use BAPI - BAPI_ACC_DOCUMENT_POST to post to FB50.
I am using the below paramaters -
DOCUMENTHEADER
TABLES
       ACCOUNTGL
       CURRENCYAMOUNT
RETURN.
But I am getting the error -   Error in document : BKPFF $ DEVCLNT. Can someone please help me with this. I have been breaking my head over this. Dont know what is going wrong!                     .
Thanks, Nina.

Thanks for all your help, Aaron.
*T Y P E S *
TYPES: BEGIN OF t_indata,
               t_ddate(8) TYPE c,
               t_ref(17) TYPE c,
               t_dbank(8) TYPE c,
               t_disno(4) TYPE c,
               t_glacnt(10) TYPE c,
               t_descrip(50) TYPE c,
               t_damt(13) TYPE c,
               t_jobid(8) TYPE c,
               t_rexpen(8) TYPE c,
               t_tperiod(8) TYPE c,
               t_tnumb(8) TYPE c,
               t_ctrans(8) TYPE c,
               t_ccenter(10) TYPE c,
       END OF t_indata.
TYPES: BEGIN OF t_error,
               t_ddate(8) TYPE c,
               t_ref(17) TYPE c,
               t_dbank(8) TYPE c,
               t_disno(4) TYPE c,
               t_glacnt(10) TYPE c,
               t_descrip(50) TYPE c,
               t_damt(13) TYPE c,
               t_jobid(8) TYPE c,
               t_rexpen(8) TYPE c,
               t_tperiod(8) TYPE c,
               t_tnumb(8) TYPE c,
               t_ctrans(8) TYPE c,
               t_ccenter(10) TYPE c,
               message(100)     type c, " Error message
      END OF t_error.
*W O R K A R E A S *
DATA: w_indata TYPE t_indata,
      w_error TYPE t_error.
*I N T E R N A L T A B L E S *
DATA: i_indata TYPE STANDARD TABLE OF t_indata WITH HEADER LINE,
      i_error TYPE STANDARD TABLE OF t_error WITH HEADER LINE.
DATA: i_acgl LIKE BAPIACGL09 OCCURS 0 WITH HEADER LINE,
      i_currency LIKE BAPIACCR09 OCCURS 0 WITH HEADER LINE,
      i_return LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
*V A R I A B L E S *
DATA: v_file       TYPE string,
      v_string(1022),                " To read data from file
      v_ddate(10) TYPE c,
      v_pdate(10) TYPE c,
      v_dcre       type wrbtr,            " Dollar Amount credit conv
      v_ddeb       TYPE wrbtr,           " Dollar Amount debit conv
      v_lines TYPE i,                   " used for format message
      v_msg(100),                        " used for Error message
      v_ind   TYPE i,
      v_index type i.
DATA: V_DOCHEADER LIKE BAPIACHE09.
     V_OBJ_TYPE LIKE BAPIACHE09-OBJ_TYPE,
     V_OBJ_KEY LIKE BAPIACHE09-OBJ_KEY,
     V_OBJ_SYS LIKE BAPIACHE09-OBJ_SYS.
*C O N S T A N T S *
CONSTANTS: c_creacnt TYPE string VALUE '111444', " Liability account
           c_del type x value '09',               " for hash delimited file
           c_fslash VALUE '\',                    " Used for Forward slash
           c_bslash VALUE '/'.                    " Used for backward slash
*S E L E C T I O N S C R E E N
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK first WITH FRAME TITLE text-001.
PARAMETERS: p_fname LIKE rlgrap-filename OBLIGATORY DEFAULT 'C:\CorpCard.txt', " File name
            rd_pserv RADIOBUTTON GROUP radi DEFAULT 'X',                    " Pres. Server
            rd_aserv RADIOBUTTON GROUP radi.                                " App. Server
Error file
parameters: p_efile type rlgrap-filename default
'/tmp/CorpCard_error'.
SELECTION-SCREEN END OF BLOCK first.
At selection-screen
Check which file is selected
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Perform to get the current value of the selection screen
PERFORM get_current_value.
IF rd_aserv = 'X'.
    MESSAGE i398 WITH 'Can not browse unix directories'(030).
ELSE.
F4 help for presentation server file name
    PERFORM get_local_file_name USING 'P_FNAME' CHANGING p_fname.
ENDIF.
AT SELECTION-SCREEN.
perform to validate input file
PERFORM validate_filename USING p_fname.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Presentation File upload
if rd_pserv = 'X'.
    perform upload_pre_file.
endif.
Unix File Upload
if rd_aserv = 'X'.
    perform upload_unix_file.
endif.
Perform to populate the internal table to the bapi.
PERFORM populate_debit.
Perform to populate the internal table to the bapi.
PERFORM populate_credit.
Perform to process the input data and post to FB50
PERFORM post_data.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
*if not i_error[] is initial.
perform to generate error file and send to application server
perform generate_error_report.
endif.
*&      Form get_current_value
FORM get_current_value .
Local internal table for screen fields
DATA: BEGIN OF i_dynpfields OCCURS 0.
          INCLUDE STRUCTURE dynpread.
DATA: END OF i_dynpfields.
CLEAR   i_dynpfields.
REFRESH i_dynpfields.
i_dynpfields-fieldname = 'RD_ASERV'.
APPEND i_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-cprog
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = i_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      OTHERS               = 10.
IF sy-subrc <> 0.
    MESSAGE i398 WITH 'Unbale to read the selection screen values'(031)
ELSE.
    READ TABLE i_dynpfields INDEX 1.
    IF sy-subrc = 0.
      MOVE i_dynpfields-fieldvalue TO rd_aserv.
    ENDIF.
ENDIF.
ENDFORM.                    " get_current_value
*&      Form get_local_file_name
FORM get_local_file_name USING p_file
                      CHANGING p_cfile.
Local variable
DATA: l_fname LIKE ibipparms-path,   " File name
        v_repid LIKE sy-repid.
l_fname = p_file.
v_repid = sy-repid.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = v_repid
      dynpro_number = sy-dynnr
      field_name    = p_file
    IMPORTING
      file_name     = l_fname
    EXCEPTIONS
      OTHERS        = 1.
IF sy-subrc = 0.
    p_cfile = l_fname.
ENDIF.
ENDFORM.                    " get_local_file_name
*&      Form validate_filename
FORM validate_filename USING p_fname TYPE any.
IF rd_aserv = 'X'.
Local variable for file length
    DATA : l_len TYPE i.
    l_len = STRLEN( p_fname ).
    IF p_fname CA space.
      IF sy-fdpos < l_len.
        MESSAGE e398 WITH 'File name should not contain spaces'(032).
      ENDIF.
    ENDIF.
    IF p_fname CA c_fslash.
      MESSAGE e398 WITH 'File name should not contain \'(033).
    ENDIF.
    IF p_fname NA c_bslash. " No directory path given
      MESSAGE w398 WITH 'File will be created in home directory'(034).
    ENDIF.
ENDIF.
IF p_fname0(1) = c_fslash AND p_fname1 = space.
    MESSAGE e398 WITH 'File name should not contain only /'(035).
ENDIF.
ENDFORM.                    " validate_filename
*&      Form upload_pre_file
FORM upload_pre_file.
v_file = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = v_file
      filetype                = 'ASC'
      has_field_separator     = 'X'
      dat_mode                = ' '
    TABLES
      data_tab                = i_indata
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE e398 WITH 'Unable to upload the file'(002).
ENDIF.
ENDFORM.                    " upload_pre_file
*&      Form upload_unix_file
FORM upload_unix_file .
open dataset p_fname for input in text mode encoding default.
if sy-subrc <> 0.
    message i398 with 'File open error(012)'(012) p_fname.
    stop.
else.
    do.
      clear: v_string.
      read dataset p_fname into v_string.
      case sy-subrc.
        when 0.
          split v_string at c_del
               into i_indata-t_glacnt
                     i_indata-t_descrip
                     i_indata-t_damt
                     i_indata-t_ccenter.
            append i_indata.
          clear i_indata.
        when 4.
          exit.
        when 8.
          message i398 with 'Unable to Read the File'(008) p_fname.
          stop.
      endcase.
    enddo.
    close dataset p_fname.
endif.
ENDFORM.                    " upload_unix_file
*&      Form post_data
FORM post_data .
V_DOCHEADER-BUS_ACT = 'RFBU'.
*V_DOCHEADER-OBJ_TYPE = 'BKPF'.
*V_DOCHEADER-OBJ_KEY = '$'.
V_DOCHEADER-USERNAME = 'VSAWANT'.
V_DOCHEADER-COMP_CODE = 'BP01'.
V_DOCHEADER-DOC_DATE = SY-DATUM.
V_DOCHEADER-PSTNG_DATE = SY-DATUM.
*V_DOCHEADER-FIC_PERIOD = '00'.
V_DOCHEADER-HEADER_TXT = 'Amex Card Upload'.
V_DOCHEADER-DOC_TYPE = 'SA'.
   CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
     EXPORTING
       DOCUMENTHEADER          = V_DOCHEADER
     CUSTOMERCPD             =
     CONTRACTHEADER          =
   IMPORTING
      OBJ_TYPE                = V_DOCHEADER-OBJ_TYPE
      OBJ_KEY                 = V_DOCHEADER-OBJ_KEY
      OBJ_SYS                 = V_DOCHEADER-OBJ_SYS
     TABLES
       ACCOUNTGL               = i_acgl
     ACCOUNTRECEIVABLE       =
     ACCOUNTPAYABLE          =
     ACCOUNTTAX              =
       CURRENCYAMOUNT          = i_currency
     CRITERIA                =
     VALUEFIELD              =
     EXTENSION1              =
       RETURN                  = i_return.
     PAYMENTCARD             =
     CONTRACTITEM            =
     EXTENSION2              =
     REALESTATE              =          .
refresh i_acgl.
refresh i_currency.
clear i_acgl.
clear i_currency.
if V_DOCHEADER is initial.
i_error[] = i_indata[] .
    read table i_return index 1.
    i_error-message = i_return-message.
    append i_error.
    clear i_error.
else.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    wait up to 3 seconds.
endif.
ENDFORM.                    " post_data
*&      Form populate_debit
FORM populate_debit .
DATA: l_debamt(16) type c.
clear: v_index,
       l_debamt.
loop at i_indata from 2.
v_ddeb = i_indata-t_damt.
v_dcre = v_dcre + i_indata-t_damt.
v_index = v_index + 1.
    i_acgl-ITEMNO_ACC = v_index.
    i_acgl-GL_ACCOUNT = i_indata-t_glacnt.
    i_acgl-ITEM_TEXT = i_indata-t_descrip.
    i_acgl-DOC_TYPE = 'SA'.
    i_acgl-COMP_CODE = 'BP01'.
    i_acgl-COSTCENTER = i_indata-t_ccenter.
    i_acgl-DE_CRE_IND = 'S'.
    append i_acgl.
    clear i_acgl.
   write v_ddeb to l_debamt currency 'USD'.
    i_currency-ITEMNO_ACC = v_index.
    i_currency-CURRENCY = 'USD'.
    i_currency-AMT_DOCCUR = i_indata-t_damt.
    append i_currency.
    clear i_currency.
   clear: v_ddeb.
endloop.
ENDFORM.                    " populate_debit
*&      Form populate_credit
FORM populate_credit .
DATA: l_creamt(16) type c.
clear: l_creamt.
v_index = v_index + 1.
    i_acgl-ITEMNO_ACC = v_index.
    i_acgl-GL_ACCOUNT = c_creacnt.
   i_acgl-ITEM_TEXT = .
    i_acgl-DOC_TYPE = 'SA'.
    i_acgl-COMP_CODE = 'BP01'.
    i_acgl-DE_CRE_IND = 'H'.
    append i_acgl.
    clear: i_acgl.
   write v_dcre to l_creamt currency 'USD'.
    i_currency-ITEMNO_ACC = v_index.
    i_currency-CURRENCY = 'USD'.
    i_currency-AMT_DOCCUR = v_dcre.
    append i_currency.
    clear: i_currency.
    clear: v_index.
ENDFORM.                    " populate_credit
*&      Form generate_error_report
FORM generate_error_report .
data: credit(16) type c.
WRITE :/1 'Title: Corporate Card Upload'(006),
         / 'Program:'(007), sy-repid,
         / 'Date:'(008), SY-DATUM.
skip 1.
uline:/(200).
format color col_heading on.
write:/(1) sy-vline,
         (8) 'Posting Date'(020),
         (1) sy-vline,
         (12) 'GL Account'(021),
         (1) sy-vline,
         (17) 'Description'(022),
         (1) sy-vline,
         (17) 'Dollar Amount'(023),
         (1) sy-vline,
         (17) 'Cost Center'(024),
         (1) sy-vline,
         (100) 'Error/Success Message'(028),
         (1) sy-vline.
uline:/(200).
format color off.
write:/(1) sy-vline,
          (8) sy-datum,
          (1) sy-vline,
          (12) '113000',
          (1) sy-vline,
          (17) 'Clearing Account',
          (1) sy-vline,
          (17) v_dcre,
          (1) sy-vline,
          (100) i_error-message,
          (1) sy-vline.
uline:/(200).
loop at i_error from 2.
    write:/(1) sy-vline,
           (8) sy-datum,
           (1) sy-vline,
           (12) i_error-t_glacnt,
           (1) sy-vline,
           (17) i_error-t_descrip,
           (1) sy-vline,
           (17) i_error-t_damt,
           (1) sy-vline,
           (17) i_error-t_ccenter,
           (1) sy-vline,
           (100) i_error-message,
           (1) sy-vline.
endloop.
uline:/(200).
clear: v_dcre.

Please help me regarding error in jcManager 1.1

Hi Friends..
perhaps this question especially for bebecanu, but perhaps i hope all of you could help me too.. :)
i tried to learn how way jcManager works, so i downloaded the jcManager1.1 source..
i created new application in Netbeans 6.9, and then i copied all of files in the jcmanager.source..
i've set the libraries needed also in Netbeans, i've added the libraries of jpcsc.jar and looks-2.1.4.jar , so assume that there's no error while compile time..
but while runtime, there's message error displayed in the TextArea..
this is the message error :
Exception in thread "Thread-3" java.lang.NoClassDefFoundError: Could not initialize class com.linuxnet.jpcsc.PCSC
     at com.braicu.jcm.card.CardWorker.disconnectCard(CardWorker.java:507)
     at com.braicu.jcm.JCManager$22.construct(JCManager.java:620)
     at com.braicu.jcm.layout.MySwingWorker$2.run(MySwingWorker.java:108)
     at java.lang.Thread.run(Thread.java:619)so, how to initialize class com.linuxnet.jpcsc.PCSC in Netbeans?..
Please help me regarding this..
Thanks in advance..

Hi
You need to have jpcsc.dll (you may find it in the res folder) in your java library path.
So, all you need to do is to specify this VM argument on running:
-Djava.library.path=res
Hope it helps
Stefan

Please Help: Playstation Banned Error Code WS-37338-4

Hi I tried signing into the PSN and got the error code WS-37338-4 saying that "Access to PSN from this PS4 has been banned or temporarily suspended." Can someone please help? I don't play online and literally use my login to update my squads on fifa so I have no idea how I got banned.

ReesFitz92 wrote:
Check your emails. I know they've been banning a number of accounts due to buying coins.They are also clamping down on game sharing particularly the suckers buying cheap digital games off Ebay.

URGENT ! Please Help ! Navigation error....

Hi,
I am getting the following error during navigation from summary report to detail report..
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1858, message: ORA-01858: a non-numeric character was found where a numeric was expected at OCI call OCIStmtExecute:
My summary report has a dummy column name 'All' and I have specified a navigation to another detail report. However it is throwing me this error when trying to navigate. This is happening even when I am not passing any filters to the detail report. Please help me to resolve this issue as I need to get this done right away.

Couple of things you can check to isolate the prb
Run the detail report individually w/o navigating from the summary report
Also make sure if your summary report runs well as such.
As long as they run indivdually and you not even passing filters ideally it shouldnt cause any issue... Does it generate a SQL?
Thanks
Prash

Please help : Pipline function, error passing parameter

Hello,
Please help a DBA who's trying to make it with PL/SQL (on Oracle 10.2.0.4).
I'm just building a script to find the space used by all the segments (lob, index, partitions) related to a table.
Here is my problem, when I call a table function (DBMS_SPACE.OBJECT_DEPENDENT_SEGMENTS) from within a pipeline function i get an error,
if I turn that function into procedure it is running fine, if I hard code parameters it works...
When running as a function I get the error :
SQL> Select * from table(yke_size_info('SAPRD', 'REPOSRC'));
Select * from table(yke_size_info('SAPRD', 'REPOSRC'))
*+
ERROR at line 1:
ORA-20000: Object does not exist
ORA-06512: at "SYS.DBMS_SPACE", line 2673
ORA-06512: at "SYS.YKE_SIZE_INFO", line 40
=> line 40 is the call to DBMS_SPACE.OBJECT_DEPENDENT_SEGMENTS
Thank for your help, I'm getting crazy with this, I've been browsing Google & docs for hoors but no answer yet !
create or replace type r_size_info as object (
nb_par_tbl   number ,
nb_idx       number ,
nb_par_idx   number ,
nb_lob       number ,
used_par_tbl number ,
used_idx     number ,
used_par_idx number ,
used_lob     number ,
free_par_tbl number ,
free_idx     number ,
free_par_idx number ,
free_lob     number
+)+
+/+
create or replace type t_size_info as table of r_size_info;
+/+
CREATE OR REPLACE FUNCTION yke_size_info(o_wner varchar2, o_bject varchar2 ) RETURN t_size_info PIPELINED AS
r_size r_size_info := r_size_info(0,0,0,0,0,0,0,0,0,0,0,0);
obj_segment_owner   VARCHAR2(100);
obj_segment_name    VARCHAR2(100);
obj_segment_type    VARCHAR2(100);
obj_tablespace_name VARCHAR2(100);
BEGIN
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM TABLE(dbms_space.object_dependent_segments(o_wner, o_bject, NULL, 1)))*
LOOP
If I change that line to hard code the parameter It's working :
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM TABLE(dbms_space.object_dependent_segments('SAPSR3', 'REPOSRC', NULL, 1)))
If I turn the function into a procedure it is working :
CREATE OR REPLACE PROCEDURE yke_size_inf(o_wner varchar2, o_bject varchar2 ) AS
obj_segment_owner   VARCHAR2(100);
obj_segment_name    VARCHAR2(100);
obj_segment_type    VARCHAR2(100);
obj_tablespace_name VARCHAR2(100);
BEGIN
FOR obj IN (SELECT segment_owner, segment_name, segment_type, tablespace_name FROM (TABLE(dbms_space.object_dependent_segments (o_wner, o_bject, NULL, 1))))*
LOOP

Not really sure what you are trying to achieve... and putting a pipeline function on top of another pipeline function seems unnecessary to me.
But using the basic code you've shown, the following works fine:
SQL> create or replace type TStrings is table of varchar2(4000);
2 /
Type created.
SQL>
SQL> create or replace function FooPipe( objectName varchar2 ) return TStrings pipelined is
2 begin
3          for r in (
4                  select
5                          segment_owner, segment_name, segment_type, tablespace_name
6                  from    table( dbms_space.object_dependent_segments(USER, objectName , NULL, 1))
7          )
8          loop
9                  pipe row( r.segment_name||' is object('||r.segment_type||') in space('||r.tablespace_name||')' );
10          end loop;
11
12          return;
13 end;
14 /
Function created.
SQL>
SQL> select * from TABLE(FooPipe('TESTTAB'));
COLUMN_VALUE
TESTTAB is object(TABLE) in space(USERS)
SQL>

Please help! AN ERROR OCCERED INSIDE A PLUGIN CONTAINED ON THIS PAGE

i use quicktime 7 and when i click links that would be a video that is quicktime when using aol it pops up with a message saying AN ERROR OCCERED INSIDE A PLUGIN CONTAINED ON THIS PAGE then you click ok then another one pops up saying THE PLUGIN DID NOT INITIALIZE PROPERLY. PLEASE HELP!

The same thing happens to me when I am using Microsoft Internet Explorer 7 on my Gateway (Windows XP Home, SP2, 512 RAM). However, once I get the error message, and open another QuickTime file, the browser displays a "IE has encountered a problem and needs to close," and shuts down MSIE. Please help!
Macbook 1.83 GHz Mac OS X (10.4.7)

PLEASE HELP LENOVO T61 ERROR RESOURCE CONFLICT PCI MESSAGE

Similar Messages

Maybe you are looking for