Please help me stop the flickering (shaking) of videos on my iMac

Over the past week, all videos that I try to watch on my iMac are flickering and shaking.  This happens on youtube and all videos I come across on the internet.  I just updated Java and it did not help.  I can lower the resolution of the videos and the shaking will stop, but then the videos are blurry and I am unable to see any detail.  Any advice would be greatly appreciated.  Thank you.

Instantly worked, found this on other thread!!
1. System Preferences >  Flash Player > Advanced >  Delete  All
     Press the "Delete All" button
2. Safari > Preferences > Privacy
    Press the button “ Remove All Website Data”.

Similar Messages

  • Please help me stop the broadcast of my calls...

    My curve defaults to speakerphone when i answer any incoming call and so the identity of the caller is made clear to anyone in earshot - embarrassing.
    After a second or two it reverts to the normal speaker which can only be heard by holding the phone to my ear. Does anyone know how to get it to stop the initial speakerphone broadcast?
    Message Edited by vincentboni on 01-15-2009 09:30 PM

    Hello,
    I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
    Soft reboot :
    1) Hit the three following keys at the same time :
    - Alt
    - Left Shift
    - Delete
    2) wait 2 minutes for the Blackberry to wake up.
    Hard reboot :
    1) your Blackberry device is on
    2) remove the battery and wait for a minute
    3) Put the battery back
    4) wait 5 minutes for the device to wake up.
    Please tell us if it works for you.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • HT201493 How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

    Did you change the ID you are using for iCoud?  If so, did you delete the account, then sign back in with your new ID on your device?

  • When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download.

    When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download. I have tried removing the .tmp folder and downloading it again, but each time it stops the download in the same place.

    I discovered the solution. The external drive I was saving it to was formatted as FAT32. In that format, the largest files can only be 4GB, which explains why it kept stopping at 4GB. I backed up all the files then reformatted it as Mac OS Extended (Journaled), this is possible since I am on an iMac.

  • [Urgent] Please help me verify the debug output on E&M interface.

    Hello,
        I've got a problem when trying to make a call from the E&M interface on the router to PABX(Panasonic). I've got any dail-tone back. Please help me verify the logging output. It seemed to already send the digits.
    ###########################debug vpm signal####################
    .Sep 20 06:43:43.911: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_1100]em_onhook_offhook htsp_setup_ind
    .Sep 20 06:43:43.911: [0/0/0] get_local_station_id calling num= calling name= calling time=09/20 13:43  orig called=
    .Sep 20 06:43:43.915: htsp_timer - 3000 msec
    .Sep 20 06:43:43.923: htsp_process_event: [0/0/0, EM_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]em_wait_setup_ack_get_ack
    .Sep 20 06:43:43.923: htsp_timer_stop interdigit timer cfgd to 3000
    .Sep 20 06:43:44.183: htsp_digit_ready: digit = 38
    .Sep 20 06:43:44.183: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
    .Sep 20 06:43:44.443: htsp_digit_ready: digit = 39
    .Sep 20 06:43:44.443: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
    .Sep 20 06:43:44.724: htsp_digit_ready: digit = 30
    .Sep 20 06:43:44.724: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
    .Sep 20 06:43:44.996: htsp_digit_ready: digit = 38
    .Sep 20 06:43:44.996: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
    .Sep 20 06:43:45.004: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_PROCEEDING]
    .Sep 20 06:43:46.224: htsp_call_bridged invokedhtsp_progress_notify
    .Sep 20 06:43:46.228: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut
    .Sep 20 06:43:51.184: htsp_process_event: [0/0/0, EM_OFFHOOK, E_DSP_SIG_0000]em_offhook_onhook, HF duration=480
    .Sep 20 06:43:51.184: mlpp_detection_enabled MLPP is not supported on this interface
    .Sep 20 06:43:51.184: em_start_timer: 480 ms
    .Sep 20 06:43:51.184: htsp_timer - 480 msec
    .Sep 20 06:43:51.664: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_EVENT_TIMER]em_offhook_wait_release_req
    .Sep 20 06:43:51.664: htsp_timer_stop
    .Sep 20 06:43:51.664: htsp_timer_stop2
    .Sep 20 06:43:51.676: htsp_process_event: [0/0/0, EM_RLS_WAIT_RLS_REQ, E_HTSP_RELEASE_REQ]em_wait_rls_release em_onhook (0)
    .Sep 20 06:43:51.676: [0/0/0] set signal state = 0x0 timestamp = 0
    .Sep 20 06:43:51.676: em_start_timer: 400 ms
    .Sep 20 06:43:51.676: htsp_timer - 400 msec
    .Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_WAIT_CLR_DONE, E_HTSP_EVENT_TIMER]em_clr_done
    .Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_0000]em_onhook_onhook
    ##########################debug vpip vtsp all####################
    .Sep 20 07:02:51.640: //44/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
       Timer Stop Time=23417277
    .Sep 20 07:02:51.640: //-1/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
       CDB=0x47575388
    .Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_allocate_cdb:
       CDB=0x47574E08
    .Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_insert_cdb:
    .Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
       [state:INVALID STATE MACHINE, event:E_CC_SETUP_REQ]
    .Sep 20 07:02:55.416: htsp_timer_stop3
    .Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_og_call_req:
       Echo Cancel=TRUE, Gain Control=0
       Auto Gain Control=FALSE, Dual Tone Detect Mask=0x0, Seq Tone Detect=FALSE
    .Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_do_call_setup_req:
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PEND, event:E_VTSP_DSM_OPEN_SUCCESS]
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_pend_succ:
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
       Mode=0, Peer=2
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
       Target Carrier ID=
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
       Source Carrier ID=htsp_setup_req
    .Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
       Progress Indication=3, Info Trans Capability=16
       Calling Number=, TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed
       Called Number=7744, TON=Unknown, NPI=ISDN
    .Sep 20 07:02:55.420: htsp_process_event: [0/0/1, EM_ONHOOK, E_HTSP_SETUP_REQ]em_onhook_setup
    .Sep 20 07:02:55.424: em_offhook (0)
    .Sep 20 07:02:55.424: [0/0/1] set signal state = 0x8 timestamp = 0
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQUEST, event:E_TSP_PROCEEDING]
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
       Timer Start Time=23417655, Timer Value=10000(ms)
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
       Peer=2, Progress Indication=0, Return Code=2
    .Sep 20 07:02:55.424: htsp_process_event: [0/0/1, EM_BRANCH, EM_EVENT_IMMEDIATE]em_branch_immediate
    .Sep 20 07:02:55.424: htsp_timer - 300 msec
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_NULL, event:E_VTSP_DSM_OPEN_SUCCESS]
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_wait_pend_success:
       Event=72
    .Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
       Timer Stop Time=23417655
    .Sep 20 07:02:55.724: htsp_process_event: [0/0/1, EM_WAIT_DIALOUT_DELAY, E_HTSP_EVENT_TIMER]em_imm_send_digits  em_send_digits  htsp_dial
    .Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PROC, event:E_TSP_DIAL]
    .Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial:
       Digits=7744, Tone Mode=0
    .Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dial:
    .Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
       Digits To Dial=7744
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_dial_done_cb:
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_DS_DIALING, event:E_VTSP_DSM_DIALING_COMPLETE]
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_dialing:
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
       Digits To Dial=
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial_comp:
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:exit@556
    .Sep 20 07:02:56.568: htsp_process_event: [0/0/1, EM_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]em_offhook_digit_done
    .Sep 20 07:02:56.568: htsp_timer_stop2 htsp_progress
    .Sep 20 07:02:56.568: htsp_timer2 - 850 msec
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PROC, event:E_TSP_PROGRESS]
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_progress:
       Progress Indication=8, Signal Indication=2, cdb->answer_supervision=0
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_start:
       Timer Start Time=23417770, No Answer Timer Value=180000(ms)
    .Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:
    .Sep 20 07:02:56.572: htsp_call_bridged invoked
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:exit@1187
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
       Fax Relay=ENABLED
       Primary Fax Protocol=CISCO_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
       Fax Relay CM Suppression :=ENABLED, Fax Parameters Set By=Global Settings
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_fax_feat_param:
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
       Save TTY configuration
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
       Set TTY feat parameters
    .Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PROC, event:E_CC_DO_CAPS_IND]
    .Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
       Event=E_DSM_CC_CAPS_ACK
    .Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PROC, event:E_CC_CAPS_IND]
    .Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
       Event=E_DSM_CC_CALL_MODIFY
    .Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_feature_notify_cb:
       Feature ID=0, Feature Status=1
    .Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:
    .Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:exit@996
    .Sep 20 07:02:56.580: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_VOICE_CUT_THROUGH]
    .Sep 20 07:02:56.580: htsp_timer_stop2
    .Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
    .Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_SETUP_REQ_PROC, event:E_CC_DISCONNECT]
    .Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_disconnect:
       Cause Value=16
    .Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_stop:
       Timer Stop Time=23419504
    .Sep 20 07:03:13.913: htsp_timer_stop3
    .Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE]
    .Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_dsm_dsp_stats_complete:
    .Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
       Timer Start Time=23419505, Timer Value=60000(ms)
    .Sep 20 07:03:13.929: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_RELEASE_REQ]em_wait_answer_release
    .Sep 20 07:03:13.929: em_stop_timers
    .Sep 20 07:03:13.929: htsp_timer_stop
    .Sep 20 07:03:13.929: htsp_timer_stop2 em_onhook (0)
    .Sep 20 07:03:13.929: [0/0/1] set signal state = 0x0 timestamp = 0
    .Sep 20 07:03:13.929: em_start_timer: 400 ms
    .Sep 20 07:03:13.929: htsp_timer - 400 msec
    .Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_GUARD_ALL, E_HTSP_EVENT_TIMER]em_guard_all_timer
    .Sep 20 07:03:14.329: em_stop_timers
    .Sep 20 07:03:14.329: htsp_timer_stop
    .Sep 20 07:03:14.329: em_start_timer: 3000 ms
    .Sep 20 07:03:14.329: htsp_timer - 3000 msec
    .Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_PARK, E_DSP_SIG_0000]em_park_onhook
    .Sep 20 07:03:14.329: htsp_timer_stop
    .Sep 20 07:03:14.329: htsp_timer_stop2 htsp_report_onhook_sig
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_WAIT_RELEASE, event:E_TSP_CALL_FEATURE_IND]
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_call_feature_ind:
       Feature Type=6
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
       [state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF]
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_wrelease_release:
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_play_busy_timer_stop:
       Timer Stop Time=23419546
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
       Timer Stop Time=23419546
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
    .Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
       Coder Rate=16
    .Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_dsm_closed_cb:
    .Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
       [state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE]
    .Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/act_terminate:
    .Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
       Timer Stop Time=23419546
    .Sep 20 07:03:14.333: //-1/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
       CDB=0x47574E08
    Thanks in advance.
    Toshi

    EDIT:
                I've not got any dial-tone back from PABX.
    Thanks in advance
    Toshi

  • How do I unprescribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issueand cancel it completely.

    Hi my name is Natalia R. I had subscribed to FIT Radio, and got charged monthly. Now, I do not want the app anymore. I have tried canceling it, but it does not allow me. How do I unsubscribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issue and cancel it completely without any further charger to my card.
    Thanks,
    Natalia R.
    <Personal Information Edited By Host>

    The following may help: Manage your auto-renewing subscriptions - Apple Support

  • HT1414 Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

    Turn Passcode Off is disabled in my iPod touch 5. Could you please help me for the same ?

    What do yoo mean?

  • Can you please help me out the Info Cubes info for Budget Execution?????

    Hi,
       Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
    Thanks in advance,
    Andy

    Take the memory card out of the camer and put it in a card reader.  When it mounts on the desktop select it and try to change the name.  However, that might make it incompatible with the camera.  You'll just have to try and see.
    OT

  • HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

    I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

    You can't back up to iCloud until you update to iOS 5 or higher.  You will have to back up your iPod on your computer using iTunes.  Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline.  Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library.  Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
    When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings.  Allow your iPod to update, and leave it connected to your computer.  At the end, it will restart and give you the option to restore to the iTunes backup you made earlier.  Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
    This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

  • Please help me with the installation process.

    i have got free norton antivirus activation keybwith the pirchase of hp 16 gb pendrive .
    please help me with the installation process.

    Hey @10p,
    Welcome to the HP Support Forums!
    I understand that you need assistance with the installation of Norton Antivirus that you received with the purchase of an HP 16gb Pendrive. Did you get the Pendrive with a computer or just purchase the Pendrive on its own?
    Once I know if the Pendrive came with the purchase of a computer I will be able to point you in the right direction for support. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Please help me with the homework given to me by my teacher

    hello,i am new in java programming please help me with the home work given to me by my teacher at school, help me to build an interface that can work with this code.i can build an interface but i dont just understand this code.
    //references:
    //http://forums.techguy.org/development/570048-need-write-java-program-convert.html
    import java.util.Map;
    import java.util.HashMap;
    import java.util.Iterator;
    import java.io.FileNotFoundException;
    import java.io.IOException;
    import java.io.BufferedReader;
    import java.io.FileReader;
    public class Translate
      public static void main(String [] args) throws IOException
        if (args.length != 2)
          System.err.println("usage: Translate wordmapfile textfile");
          System.exit(1);
        try
          HashMap words = ReadHashMapFromFile(args[0]);
          System.out.println(ProcessFile(words, args[1]));
    catch (Exception e)
          e.printStackTrace();
      // static helper methods
       * Reads a file into a HashMap. The file should contain lines of the format
       *    "key\tvalue\n"
       * @returns a hashmap of the given file
      @SuppressWarnings("unchecked")
      private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
        BufferedReader in = null;
        HashMap map = null;
        try
          in = new BufferedReader(new FileReader(filename));
          String line;
          map = new HashMap();
          while ((line = in.readLine()) != null)
            String[] fields = line.split("\\t", 2);
            if (fields.length != 2) continue; //just ignore "invalid" lines
            map.put(fields[0], fields[1]);
    finally
          if(in!=null) in.close(); //may throw IOException
        return(map); //returning a reference to local variable is safe in java (unlike C/C++)
       * Process the given file
       * @returns String contains the whole file.
      private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException {
        BufferedReader in = null;
        StringBuffer out = null;
        try {
          in = new BufferedReader(new FileReader(filename));
          out = new StringBuffer();
          String line = null;
          while( (line=in.readLine()) != null ) {
            out.append(SearchAndReplaceWordsInText(words, line)+"\n");
        } finally {
          if(in!=null) in.close(); //may throw IOException
        return out.toString();
       * Replaces all occurrences in text of each key in words with it's value.
       * @returns String
      private static String SearchAndReplaceWordsInText(Map words, String text) {
        Iterator it = words.keySet().iterator();
        while( it.hasNext() ) {
          String key = (String)it.next();
          text = text.replaceAll("\\b"+key+"\\b", (String)words.get(key));
        return text;
       * @returns: s with the first letter capitalized
      String capitalize(String s)
        return s.substring(0,0).toUpperCase() + s.substring(1);
    }... here's the head of my pirate_words_map.txt
    hello     ahoy
    hi     yo-ho-ho
    pardon me     avast
    excuse me     arrr
    yes     aye
    my     me
    friend     me bucko
    sir     matey
    madam     proud beauty
    miss     comely wench
    stranger     scurvy dog
    officer     foul blaggart
    where     whar
    is     be
    are     be
    am     be
    the     th'
    you     ye
    your     yer
    tell     be tellin'

    Heres your answer. Run it in on your pc.
    public class Annoy
    public static void main(String[] args)
       System.out.println("I am a triple poster.");
       System.out.println("I can not understand why I can not understand the help I have receved to date on the java forums.");
    }

  • Please help me with the digital signature validation problem?

    Please help me with the digital signature validation problem?

    Hi
    Execute the program in the Debuggin mode.
    In the Debugger Window
    Select Breakpoint -> Break point at -> Breakpoint at source code Menu Item and enter the details of the program/include/line no..
    Activate the System Debugger On from the Settings Menu.
    Hope this would help you.
    Murthy
    Edited by: Kalyanam Seetha Rama Murthy on Jul 18, 2008 7:20 AM

  • Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

    Please help me with the accounting records of iTunes. At step in placing credit card details are asked to contact iTunes Support

    Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
    http://www.apple.com/support/itunes/contact/

  • Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
    Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
    Better practice however is to use a dedicated machine and use remote desktop to the server.
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    Contact the email provider and obtain the correct setup information.

Maybe you are looking for

  • How can I use family sharing, but allow my daughter to purchase with her iTunes allowance without asking permission?

    I love the idea of iTunes family sharing, but I don't think it currently supports my situation. My daughter's iTunes account gets a monthly allowance (plus occasional gift cards), and does not have a credit card tied to it. That way, she can buy what

  • Text table for long text of product catalog area and product description

    Hi experts, I'm a new comer in CRM, what my current job is to do the translation for CRM system and its portal, e.g. webshop.  Now I met some questions as below, Could you please give me some advices? 1. Long text for product catalog area (t-code: CO

  • ADF Table selection problem

    I'm stumped here... I'm basically cutting and pasting the code below from the ADF doc but I still can't get the selected rows in my table. I get a NullPointerException on the first line of the delete method... anyone know what I'm doing wrong? Releva

  • Revenu recognition options grayed up

    Hi We are facing an issue with the SPRO Revenu recognition options which are grayed up, which does not allow to select any values.  We have allowed all the authorization etc. but no luck. Follows the procedure to see those option : TC- SPRO --> SAP R

  • Changing iTunes U feed URL

    Hello, we have to modify the the feed URL's for our existing collections on iTunes U Public Site. Feeds are hosted by our server ( not Apple Server hosted feed).   What I'm thinking to do is to delete existing collections via Public Site Manager and