Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator
You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.
Similar Messages
-
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201
We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it. -
Please help me to find the sample code and schema for GetDBDateTime.zip fil
Please help me to find the GetDBDateTime.zip and Guest_Book.zip files.
Tks!Does this Help?
http://www.oracle.com/technology/sample_code/products/ias/files/psp/GetDBDateTime/Readme.html
Did you install Oracle9iAS ? -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
Please help me in finding the solution for this query
Hi Experts,
How could i print column name's second word in next line
suppose am taking ename alias as "employee name"
i want to print the second word "name" in next line
like
"Employee
Name"
Whats the way of writing this query
Please help me out
Thanks in AdvanceHi,
914618 wrote:
WITH mydata AS
SELECT 1 emp_id, 'John Smith' emp_name FROM DUAL UNION ALL
SELECT 2 emp_id, 'Steve Jobs' emp_name FROM DUAL UNION ALL
SELECT 3 emp_id, 'Larry Allison' emp_name FROM DUAL
SELECT emp_id, emp_name
FROM mydata;
after executing the above query the o/p I am getting is in the normal format like EMP_ID and EMP_NAME
not according to my requirement like
Emp Emp
Id NameWhat are the results you reaally want? Do you want this?
` EMP_ID SPLIT_NAME
1 John
Smith
2 Steve
Jobs
3 Larry
AllisonIf so:
SELECT emp_id
, REPLACE (emp_name, ' ', CHR (10)) AS split_name
FROM mydata
;The results above are 3 rows, not 6.
What results would you want if emp_name contained 3 or more words? For example, if you add this to the sample data:
SELECT 9 emp_id, 'Aung San Suu Kyi' emp_name FROM DUAL UNION ALL -
Please help me to find the drivers/software for SB Surround
Hi all!
Does anyone know how to find the drivers fo the SB Surround 5. external sound card?
Since the HW looks quite similiar to the LIVE 24bit external I tried to install the drivers for it but they didnt work.
I can not find the SB Surround 5. card in the auto update section.
Thanks in advance/BartekHere is the link
http://support.creative.com/downloads/download.aspx?nDownloadId=0588
The driver suite gives you all the software, plus the newest driver.
Unfortunately, creative still hasnt listened to us and has not given us DDL. There was no real need to waste 60 bucks on this thing, if all it does is increase sound quality a tiny amount. When I saw the device I, along with many other customers, came to believe that it would allow for surround sound music. However, the device only outputs media that is already in surround sound, as 5. . I have tried AC3 filter, kx driver (wont work) , rednoreck (no asio) , and tons of random plugins for winamp. I have no idea how to get stereo upmixed to 5. with the spdif out on this card. I am going nuts because of this. If anyone knows how to do that please let me know !? -
How to get rid of Apple Support Community notices? my box is full as I receive thousand of messages a day. I cannot handle it anymore, please it is urgent. Help! I have Mac OS X 10.7.5 and unable to find the "notification tab" in my "preferences" I need a image if possible to better understand. Thanks a lot.
Thank you, but I just tried everything you said, my apple id account (icloud) continues and still is receiving the email from ASC each second. My i phone and macpro (i cloud account) is full of messages that I have difficult to erase at once. I have to do it one by one which can take me the whole day. How can i unsucribe from ASC, just get ride of my account, I mean cancel the ASC account, so I will not get any messages. Please help. Thanks.
-
Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description SAP-Term Explaination
1.Salesman Equipment AC Mgr. VBPA2 this is the salesman code - I need the
description for this.
2.Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
structure from me23n in item data-account
assignment-sales order. The number here should
be the corresponding contract number. This field
should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period Val. Period Category Val. Period Category from va41 header-contract
Category data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/ CAUFVD-GSTRP/ This should be the document date where by it is in
Purchase Order MEPO_TOPLINE-BEDAT between the range the user input
Document Date
5. B2B Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost MEPO1211-NETPR This cost is pulled from PO (me23n) however take
note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost RIHAUFK_LIST- DGESKOSIST This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults Completed
This means only orders with system
status TECO will be pull. Take note service only
take order type RD08.
12. Spare Cost Spare part cost This field will be in IW33 under cost tab, and cost
PMCOEA-IKOSTENKGR tab in item level. This will be the actual cost of spare
part after TECO. This will include all order type.
13. Credit Note Credit Memo The programs need to pull out credit memo which is
reference from the contract. If there is a credit memo
reference from the contract then the value will be net
price per equipment.Can u tell me purpose of this spec ?
Regards,
pandu. -
Please help me 2 find a Document for this jar file com.sap.workflow_api
HI,
I want to create a task in UWL using web dynpro application. For this I need to import the specified com.sap.workflow_api.jar jar file.
This jar file is in our WEB AS Server
path=
server\c\usr\sap\W01\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.workflow.apps\lib
I have browsed all over for a good document , i got just one link :
http://help.sap.com/saphelp_nw70/helpdata/EN/46/94b9b2b321581ce10000000a1553f7/frameset.htm
Could you help me out with a better document for This task and I want the complete document for this particular jar file com.sap.workflow_api.jar.
It wolud be very helpful if I could get it at the earliest.
Regards,
Boopathi MHI Ayyapparaj,
I have converted my project to javadoc,but i don't get any document for specific class. only I got what ever method is avilable in our controller that corssponding method come over in the java doc.
How can i get the document for specified IWorkflow interface ? this com.sap.workflow_api jar file has IWorkflow interface. I need to know how to use this IWorkflow interface.
How to use javadoc tool ?
Regards,
Boopathi M -
Please help me to find the problem in this Query
hi
This is my xml structure,
<?xml version="1.0">
<rss version ="2.0">
<channel>
<Lgs>
<Lg>
<Fid>16447</Fid>
<Fname>Sam</Fname>
</Lg>
</Lgs>
<Lgs>
<Lg>
<Fid>206</Fid>
<Fname>David</Fname>
</Lg>
</Lgs>
<Lgs>
</channel>
</rss>
I need to limit the results ie, at a time retrieve only "10" results , also that should be ordered by node "Fid".
I am using PHP-API
and following query is i have used...
$query = "let $hits := (for $hit in collection('gview.dbxml')/rss/channel/Lgs/Lg order by $hit/Fid return $hit) return subsequence($hits, 1, 10)";
$results = $mgr->query($query);
getting the error,
Fatal error: Uncaught exception 'xmlexception' with message 'Error: syntax error, unexpected :=, expecting <end of file> [err:XPST0003], <query>:1:8' in /usr/local/apache/htdocs/add_loc_file.php:99 Stack trace: #0 /usr/local/apache/htdocs/add_loc_file.php(99): xmlmanager->query('let := (for i...') #1 {main} thrown
Message was edited by:
user647571The "$hits" in your string is being interpreted by PHP as a variable reference and substituted out before DB XML gets the query.
John -
REGARDING FINDING MASTER TABLE FOR FIELD
HI EXPERTS ,
FOR EX AUFNR IS FIELD , HOW TO FIND MASTER WHERE IT HAS GOT
ALL DATAHi,
Hint: any field y want to chk, follow these steps.
Goto Se11 -- in table view --- Entry help / check table --- go to this tables if avaliable.
Hope this will help you a lot.
Jogdand M B -
How to find database table for field in CRMD_ORDER?
Hello,
in CRMD_ORDER there is a field CRMT_7850_SERVICE_UI-DURATION.
The structure is CRMT_7850_SERVICE_UI
The fieldname is DURATION
How can i find out in which database table content of this field is stored?
Thanks a lot
Best regards
ManfredHi,
When you execute report CRM_ORDER_READ (trx. se38), entering your order nr, you will get
an overview of all the underlying tables and their entries of the order.
E.g. you will find structure ET_SERVICE_H, corresponding to table CRMD_SERVICE_H;
structure ET_SERVICE_I, corresponding to table CRMD_SERVICE_I.
I expect your field (duration) to be in CRMD_SERVICE_I.
regards,
Wim -
How to create Check table for Field Maktx
Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek -
Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason
Maybe you are looking for
-
New Multi-OS/CPU aware virus broke through virtualbox. For a reason.FYI
FYI (all) Dear sir (RMS @ GNU), my apologies. That e-mail concerned the embedding (secretly) of personal information during the make process of certain gnu software but there's a new developent and I'm extremely mad : I have been looking for ways to
-
My 6-month old macbook air's calendar keeps freezing up. when I open calendar, it displays across the top of the calendar some text I copied for another purpose and which I pasted into a word document yesterday. When this happens there's nothing I
-
I interrupted the AI update install last night. Now it won't work and I cannot update. Help.
-
Dear all SAP gurus, i need to create following reports which are consignment related. kindly let me know your ideas about the same. 1. report on consignment fill-up details required: a) document no. b) document date c) customer's name d) transporter'
-
Hi need help II used wait time function to wait 5 second before send command to my device , I put this function in while loop so I could display the waiting time until it is reach 5 seconds , it is work in the first run but when I run the VI for the