Please help me with installation of adobe reader

Hello, I hope I'm in the right spot.  I finally was successful in downloading and installing flash player but now I can not download and install the adobe reader!!  It gets all the way through the download and gives me the message "installation did not pass the integrity check"... as a result I can no longer read pdf's...  Please help.  What is up with this???   This was the same message and problem I had with installing the new flash player, but I ran a debugger and then was able to download the flash player.  I tired running the debugger again and installing reader but it did not work.  Please help.  Thank you,
Kathleen

I've had the same problem installing the update for Adobe Reader 9.3.2.  On every PC at work (Windows XP SP3) I have had to uninstall Adobe Reader and reinstall in order for the 9.3.3 to be accepted!  Annoying but acceptable.  However, on one particular PC I now have the problem where I am unable to neither uninstall nor update nor reinstall - whatever I do the same message comes up:
"This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package."
I hoped your link would assist, but alas it has not.
I have tried System Restore to a time prior to all this fuss and bother, but that hasn't helped either - the same message still comes up.
I am now at a loss as to what to do next and getting peed off as I'm having to try to resolve this remotely while at home, on a weekend, when I should be out enjoying the glorious London sun!
Cheers in advance to anyone who can help =)
P.S. Our PC's aren't linked to a network server - they are standalone.  We're a charity with limited funds alas.

Similar Messages

  • Please help I can not launch Adobe Reader XI

    My adobe reader suddenly stopped working yesterday.
    I was running version 8 or 9 under windos 7 and it suddenly gave me a strange error message that the Core DLL failed to load.  I have never seen this happen before.  It's also asking me if I want to run protected mode off and I keep saying yes  please help!!
    thanks
    Marc

    I used version 9.  Basically what happened was it decided to stop working.  I uninstalled version 9 and installed 11 and it gives the same error message "Core DLL failed to load".  Also tried running it in Non protected mode.  also tried repairing both versions in the control panel.  nothing's working!   very strange considering up to a few days ago version 9 was wortking fine and has been for years
    thanks any help is appreciated!

  • Please HELP me with installation - java.lang.noclassdeffounderror:

    Please Help! For school we need to install JAVA. I installed JDK 5.0 and id did not work. I got exception in thread "main" java.lang.noclassdeffounderror: hello. I was using Texpad to write, compile, and run it. In short I deleted all JAVA 5.0 using My Computer program removal. I installed JAVA 1.4..2_10 and I am still getting that same error. I want the JAVA 1.4..2_10 to be installed and not JAVA.5.0.
    My System Variable CLASSPATH still shows C:\Program Files\Java\jre1.5.0_03\lib\ext\QTJava.zip. My System Variable PATH has nothing as far as JAVA in it. MY PATHEXT has JS and JSE amoung other things in it. My System Variable QTJAVA still has Files\Java\jre1.5.0_03\lib\ext\QTJava.zip in it.
    Please tell me step-by-step how I can fix this. I never updated these variables before. What do I need to type and where? What do I need to get rid of or change?
    PLEASE HELP!
    Thanks,
    Jim

    I left my System variable classpath --> C:\Program Files\Java\jre1.5.0_03\lib\ext\QTJava.zip I left my QT JAVA --> C:\Program Files\Java\jre1.5.0_03\lib\ext\QTJava.zip I added Path --> ;C:\j2sdk1.4.2_10\bin and then restarted my computer. I added hello file in C:\j2sdk1.4.2_10\bin and tried to compile it under a new name and it would not compile. it gave me the error below. I was able to compile other java program in my other folder in a different directory. I am still getting the same error messages/ Anything else I should try? IS there anyplace or person I can call who would come and fix this? Something is wrong. This should not be giving me this much trouble. All The Java directions on other websites tell me to do different things. I am so confused... please help.
    I get this during the compilenow:
    javac: invalid flag: C:\j2sdk1.4.2_10\bin\helloa.txt
    Usage: javac <options> <source files>
    where possible options include:
    -g Generate all debugging info
    -g:none Generate no debugging info
    -g:{lines,vars,source} Generate only some debugging info
    -nowarn Generate no warnings
    -verbose Output messages about what the compiler is doing
    -deprecation Output source locations where deprecated APIs are used
    -classpath <path> Specify where to find user class files
    -sourcepath <path> Specify where to find input source files
    -bootclasspath <path> Override location of bootstrap class files
    -extdirs <dirs> Override location of installed extensions
    -d <directory> Specify where to place generated class files
    -encoding <encoding> Specify character encoding used by source files
    -source <release> Provide source compatibility with specified release
    -target <release> Generate class files for specific VM version
    -help Print a synopsis of standard options
    Tool completed with exit code 2
    Jim
    If you can fix this I will give you 14 points. I hope it is enough. I just want this to work for school.

  • Difficulty with installation of Adobe Reader

    I receive the following error message when trying to download Adobe Reader.
    An error has occurred in the script on this page.
    Line:      1
    Char:      14918
    Error:     Object expected
    Code:       0
    URL:     http://127.0.0.1:2407/app/_is/adobe.js

    i can't find any reports of that (javascript) error in firefox.  there are scores of reported problems using ie.
    restart your computer, don't open ie and open firefox and retry using the link i suggested.  if that fails, update your firefox.  if that fails download using firefox on a different computer.

  • Please help me with installation...

    I want to create WebServices with Java, so I've read to install JBOSS, JWSDP and AXIS.
    At my pc a Tomcat 5.x-Server was running, before. So I've deinstalled this one, in order to install JBOSS, JWSDP (also including Tomcat) and AXIS.
    First I've installed JBOSS, then JWSDP and in the end AXIS (I've only extraced the "axis"-Directory into the "webapps"-Directory. Is it correct?)
    After starting Tomcat and calling http://localhost:8080, a page beginning with content "JavaTM Web Services Developer Pack 1.0_01...." has been shown.
    I think this is correct, or?
    But I don't know what Tomcat-version of has been installed by JWSDP?
    With Tomcat 5.x, I've used JSTL 1.1 for JSP-pages. By using JSTL 1.1, this version produces errors...
    So I've deleted the directories tld and lib of JSTL 1.1 and copied these directories from JSTL 1.0 there.
    The result is the following error-message:
    javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
    What have I to do, in order to work e.g. with a simple c:out-command, been displaced in the brower?
    What's the difference between JSTL 1.1. (core, sql u. xml) and JSTL 1.0.?
    Can't I use my pages of JSTL 1.1 anymore?
    I also can't get any database connection (with JConnector) to my mySQL-database - what's the reason for it? The wrong driver-version?
    Is it also possible to re-install my former Tomcat 5.x and use WebServices as well?
    I wanted to install the Webservices into my Tomcat 5.x-directory, but by installing JWSDP, it was not possible to select an existing Tomcat-version..
    Pls. help me - I don't know anyone who can give me any answer...
    Bye
    Chris

    For best help with Windows issues, please post in an applicable forum here:
    http://answers.microsoft.com/en-us/windows/forum
    Please be sure to select your Windows version and an appropriate subject category from the drop down lists before posting there.

  • Please help me with the XML tag reading.

    I have an content.xml with thouthand <table:table-row /> tags.
    How can I read the attributes and values of the tag 150 for example?
    Should I read one tag after the other before I reach 150, or there is a shorter way?
    XML Structure of content.xml as example below.
    In this sample I want to get the row4 and its value D4. Of course I don't know what value have the fourth tag and can't search tag with a value D4. I just know that the Row4 contains the value I need.
    Is there any possibility to read the fourth tag, or I should read from the beginning and increase the counter. If the counter is 4, I should read the value. It seems to me not a good approach, because the files can contain thousands of tags and for each value to go throught the whole xml is resource-intensive.
    <table:table table:name="Sheet1" table:style-
    name="ta1" table:print="false">
    <table:table-column table:style-name="co1" table:
    number-columns-repeated="7" table:default-cell-
    style-name="Default"/>
    <table:table-row table:style-name="ro1">
    <table:table-cell office:value-type="string">
    <text:p>A1</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>B1</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>C1</text:p>
    </table:table-cell>
    <text:p>D1</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="3"/>
    </table:table-row>
    <table:table-row table:style-name="ro1">
    <table:table-cell office:value-type="string">
    <text:p>A2</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>B2</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>C2</text:p>
    </table:table-cell>
    <table:table-cell/>
    <table:table-cell office:value-type="string">
    <text:p>E2</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="2"/>
    </table:table-row>
    <table:table-row table:style-name="ro1">
    <table:table-cell office:value-type="string">
    <text:p>A3</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>B3</text:p>
    </table:table-cell>
    <table:table-cell office:value-type="string">
    <text:p>C3</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="4"/>
    </table:table-row>
    <table:table-row table:style-name="ro1">
    <table:table-cell/>
    <table:table-cell office:value-type="string">
    <text:p>B4</text:p>
    </table:table-cell>
    <table:table-cell/>
    <table:table-cell office:value-type="string">
    <text:p>D4</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="3"/>
    </table:table-row>
    <table:table-row table:style-name="ro1">
    <table:table-cell/>
    <table:table-cell office:value-type="string">
    <text:p>B5</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="2"/>
    <table:table-cell office:value-type="string">
    <text:p>E5</text:p>
    </table:table-cell>
    <table:table-cell table:number-columns-repeated="2"/>
    </table:table-row>
    <table:table-row table:style-name="ro1" table:number-rows-repeated="2">
    <table:table-cell table:number-columns-repeated="7"/>
    </table:table-row>
    <table:table-row table:style-name="ro1">
    <table:table-cell table:number-columns-repeated="4"/>
    <table:table-cell office:value-type="string">
    <text:p>E8</text:p>
    </table:table-cell>
    <table:table-cell/>
    <table:table-cell office:value-type="string">
    <text:p>G8</text:p>
    </table:table-cell>
    </table:table-row>
    </table:table>

    Thanks for the answer.
    And is there any possibility to get the tag with the value 5. I know that the fifth tag should contain the value I want, in this case 5. But there is an attribute, and if this attribute is not null, then some tags1 can be shifted so that the third tag1 have an attribute tags=2, so I know that there is no the fourth tag and I read the next tag as fifth (with XPath doc/tag[4]).
    Should I read all tags, or there is some other way with the XPath. To search for the first tag with attributes and if its position before the fifth tag, than to decrease the tag-position counter and so on.
    <doc>
    <tag1>1</tag1>
    <tag1>2</tag1>
    <tag1 tags=2>3</tag1>
    <tag1>5</tag1>
    <tag1>6</tag1>
    </doc>Thanks in advance.

  • Please help me install/cancell my Adobe Reader

    @Hi. I don't use this product and can't see paying for it the rest of my life. I'm 71 and will have MAJOR surgery in December. There is always a chance...........
    Thanks for reading.
    Judyth in Kansas

    If you have subscribed to any Acrobat.com online services, see http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription-acrobat-online-servi ces.html

  • Please help me with the installation process.

    i have got free norton antivirus activation keybwith the pirchase of hp 16 gb pendrive .
    please help me with the installation process.

    Hey @10p,
    Welcome to the HP Support Forums!
    I understand that you need assistance with the installation of Norton Antivirus that you received with the purchase of an HP 16gb Pendrive. Did you get the Pendrive with a computer or just purchase the Pendrive on its own?
    Once I know if the Pendrive came with the purchase of a computer I will be able to point you in the right direction for support. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Adobe reader installer freeze with out downloading Adobe Reader when opened?

    I can not download Adobe Reader on my Mac: I can do it on my iMac, and have done it fore 10 years now, but Adobe reader download freeze before downloading the file

    thank you so much fore your reply: it is the download assistant..
    BUT  I have just got a download in direct mode.
    Frederik
    Den 25/08/2014 kl. 20.39 skrev Sabian Zildjian <[email protected]>:
    adobe reader installer freeze with out downloading Adobe Reader when opened?
    created by Sabian Zildjian in Enterprise Deployment (Acrobat and Reader) - View the full discussion
    Is it the Download assistant that is freezing or is it the web browser that freezes?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6672321#6672321
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Enterprise Deployment (Acrobat and Reader) by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

    please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

    arai-c wrote:
    I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
    arai-c wrote:
    the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
    I don't understand; two days ago you wrote that you have it, now you don't...?
    If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version.

  • When i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation i

    when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • Hello guys. May you please help me with something? I have read something about "I can't Register my Debit Card". So, May someone explain me any other way to Purchase Apps? I can do it using Paypal? Thanks.

    Hello guys. May you please help me with something? I have read something about "I can't Register my Debit Card". So, May someone explain me any other way to Purchase Apps? I can do it using Paypal? Thanks.

    Read this:
    http://support.apple.com/kb/HT5552

  • Please Help! Flash Installation Errors!

    I had Flash CS4 working a few months ago, then I installed Air.
    After it installed, I kept getting an error message whenever I tried to open Flash CS4.
    I uninstalled Air, Flash, and all other Adobe programs from my computer.
    Then, I couldn't install flash.
    I used the CS4 Clean Script, defraged my computer, cleaned the registry, removed all traces that I could find of Adobe on my computer.
    I disables my firewall, McAfee and I'm the administrator of my computer, but that didn't help.
    The installation stops very close to the end and says Installation Failed
    I even tried safe mode, but the fancy installer didn't work like a normal batch file and wouldn't open.
    I'm using a 32-bit Windows XP.
    Please Help!
    The error code:
    Adobe Flash CS4
    Error:
    Error 1625. This installation is forbidden by system policy.  Contact your system administrator.

    When you uninstall, make sure to use the CS4 Clean Utility thereafter. Sometimes remnants of trials get in the way. Also make sure you get rid of Adobe AIR and Acrobat.com. These are separate from the main install and need to be removed individually. Likewise, you may wish to check your Acrobat/ Adobe reader install and remove it, if necessary. Since it uses components shared with PS and those may in fact be newer than the ones on the Photoshop install DVD due to updates, the installer may not liek them. And of course with all things Vista: Run as admin on first program launch so the activation can proceed and all other options can kick in correctly.
    Mylenium

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • Please help me with spry bar menu

    I have laid out my page with the div tags in Dreamweaver. I defined the  different sections by putting colors in them until i am ready to put stuff into them however when i insert the spry menu bar into my navigation section, the area below it is behaving like a drop down box  of color. What i mean is that the area below which is supposed to stretch from left to right as a single box is now broken up by a different color box the width of the spry bar and goes down to the next box. When i preview it in the browser the page appears normal. How can i get rid of the intruding box in dreamweaver.

    HI
    I am practicing for the webmaster design course pratical exam. The web page i will be asked to construct will consist of a home page with two or three other pages pages in the site it will have to link to.  I know how to do most of the steps individualy but i do not know in what order some of them are done. What i mean is this. ... after setting up the root folder..images..laying out the divs .. i would like to know ... at what point do i do the various things like, set up a styles folder...make a template... make the other pages of the site ..etc. I think i am able to do nearly all of these things but not sure in what order they should be done so the site will work.
    I have reached the point where i have established the site and layout, i.e. the wrapper, logo, navigation,header,bodycontent,right and left columns, clearbar, footer. i would like someone to list the sequence i should follow after this. I am praticing on a trial CS5.5 which seems to simplfy to a freat extent what we learned on the course because it is a later version. The version we used on course was  CS4  and if the pratical is in this version then i will need to know how it is done in this format.
    Date: Sun, 22 Jan 2012 17:45:18 -0700
    From: [email protected]
    To: [email protected]
    Subject: Please help me with spry bar menu
    Re: Please help me with spry bar menu created by Nancy O. in Dreamweaver - View the full discussion
    If this only happens in DW Design View, use Live View or turn off your CSS display.
    View > Style Rendering > un-tick Display Styles.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4157994#4157994
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4157994#4157994. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for