Please help me with Nokia E71 very strange problem...

I have Nokia E71_v1, I got lots of strange problem like:
1- The camera didnt save the images and create the images like this: Name of the image*jpg but I can take videos without a problem.
2- when I put anything in the memory card or the phone memory it became currpted and then I couldnt open them at all, the message "can open the file" or "file is currpted" appears.
3- I couldnt install any application to the phone, if I put any sis file on the memory I get "file currpted" message but if I sent it to the phone via bluetooth I could install it.
4- The name of the folders usually change their name and currpted characters appeard in the folder naming.
5- When I added any mp3 files to any memory the files are disappeared.
410.21.010
RM364
Noka E71-1 (19)
please help
Attachments:
090620091272.jpg ‏242 KB
090620091273.jpg ‏299 KB

You better reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings. Reformat the card in the phone and remove the card using the menu from the power button. Do not encrypt the card as a test.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

Please help me with the digital signature validation problem?

Please help me with the digital signature validation problem?

Hi
Execute the program in the Debuggin mode.
In the Debugger Window
Select Breakpoint -> Break point at -> Breakpoint at source code Menu Item and enter the details of the program/include/line no..
Activate the System Debugger On from the Settings Menu.
Hope this would help you.
Murthy
Edited by: Kalyanam Seetha Rama Murthy on Jul 18, 2008 7:20 AM

PLEASE HELP ME with Nokia N76!!!

OMG! I do photos and when i do more photos on phone screen was write "photographis is turn off". and i can't do a photos i don't know why it happens... please help me becouse this phone is not my and i have to correct him...
Message Edited by popse on 03-Aug-2008 08:12 PM

have you your photos stored on the phone or memo card have you enough memo and can you explain some more
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Please help me with Nokia N95 Problem.

If anyone can help with this I’d be much appreciated, I have a N95 on contract with T-Mobile. When I try to play videos from myspace, or you tube etc… I get a message telling me the following.
“Hello, Either you either have JavaScript turned off or an old version of macromedia's flash player click here to get the latest flash player”.
I then get the option of clicking on a link within the previous sentence statement that directs me to acrobat downloads home page where I get the following message.
“We are unable to locate a web player that matches your platform and browser. Please visit our table of recommended web players”
This is deeply frustrating as in nearly every other way I feel the phone is perfect. If Any one can hep me fix this problem I’d be much appreciated.

I'm in exactly the same situation as daperk... Love the phone BUTthe selling point for me was the internet access so when i began surfing found that most me the sites i went to i couldn't see the content and also would sometimes recieved a message saying i didn't have enough memory now considering i have a 2 gig card in it this didn't seem right i looked for any settings to allocate more space to internet browser but can't find anything... Regarding the utube program on the phone why supply it if it doesn't work?? I have the same problem i can see them in the menu but when i select one it doesn't play... I'm new here and only came here looking for a solution to the flash player issue but now i'm here i noticed posts refering to handsets crashing this i have to mention is another problem i have encountered... I'm doing something and the phone just freezes up leaving the only thing i can do is turn the power off and on to reset it... As i said at the start love the phone... But just wish it did what it said on the tin...

Please help me with nokia 3500c

i have nokia 3500c and when i play music in headphones,the volume is very low even when trying to high from volume button still low when i play it in other device ,the sound is high .only nokia do this why?
using headphone nokia hs-47

have you your photos stored on the phone or memo card have you enough memo and can you explain some more
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Please help me with this 'did not respond' problem.

So, I too have this same old 'user did not respond' problem. I know there are lot of similar problems but this was the last thing left to do – post here. So, audio and video are not working.
My setup:
ADSL-line -> A-Link RoadRunner 44E –modem --(wired)--> Airport Express –(wireless)--> My PowerBook
More information about the modem can be found here: http://www.a-link.com/uk/RR44.html?id=H4phxx3p
A-Link:
IP = 10.0.0.2
Subnet = 255.255.255.0
NAT = Enabled (only way to get AirTunes to work)
Firewall = Disabled
Port forward = Disabled (tried it but no difference)
DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
UPnP = Don’t have it
Airport Express:
IP = 10.0.0.3
Subnet = 255.255.255.0
NAT = Disabled
DHCP = Disabled
PowerBook (10.4.4):
IP = 10.0.0.22 (using dhcp)
Subnet = 255.255.255.0
Firewall = Off (On or off no difference. Yes, I added all the necessary ports)
QuickTime Streaming Speed is set to match my Download
iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
Tried 10.4.4 combo installer but no luck.
Everything else works (Internet, Skype, AirTunes…) and I can text chat in iChat. I don’t know what else to try anymore . By-the-way this has worked with these same settings one time before, then it went dead. Don’t understand…
I tried to connect and this is what /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7 had to say (looong and some is in finnish):
PowerBook-Ville:~ ville$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
185350.100130 Loading hardware rules from hardwarerulesH264-G4.plist
185350.101435 Checking H264 hardware rules
185350.101926 Satisfied rule #4 (30:160x120)
185350.102967 setLocalUserName: Ville @10.0.0.22
185350.143698 ### NEW STATE: to: VC_INIT, from: VC_INVALID
185350.145859 ### NEW STATE: to: VC_IDLE, from: VC_INIT
185350.146389 ++++++++ confStatusMapRemoveAll
185350.146662 ( ) -- mapUserIDToSecurityInfo cleared --
185350.147441 UPnP init passed
185350.150244 NATTraversal created
185350.151282 Bandwidth based on QT prefs = 384
185350.167948 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185350.168679 BWD bandwidth: 445 kbits up, 468 kbits down.
185350.168965 videoNetworkCapable: 1 -- 3 max participants.
185350.169148 audioNetworkCapable: 1 -- 9 max participants.
185350.169400 vcCapabilities returns: 0x0000001f
185350.169914 VCCapAudio
185350.170480 VCCapVideo
185350.172530 VCCapMultiAudio
185350.173351 VCCapMultiVideo
185350.173632 VCCapMultiAudioHost
185609.538404 Microphone: callback thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
185609.538585 Microphone: null device thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
185609.583711 Microphone devices:
185609.583779 Camera_HasAudio = 0
185609.586286 iSight Sisäänrakennettu
185609.586693 Sisäinen mikrofoni
185609.586740 Linja sisään
185609.604815 Selected mic: Sisäänrakennet / imic
185609.683890 SIPManager init
185609.700807 selectedCamera returned iSight
185609.972619 Microphone devices:
185609.973469 Camera_HasAudio = 0
185609.973961 iSight Sisäänrakennettu
185609.975015 Sisäinen mikrofoni
185609.975690 Linja sisään
185609.978111 Microphone devices:
185609.978692 Camera_HasAudio = 0
185609.979612 iSight Sisäänrakennettu
185609.980640 Sisäinen mikrofoni
185609.981305 Linja sisään
185609.984519 Microphone devices:
185609.985590 Camera_HasAudio = 0
185609.986262 iSight Sisäänrakennettu
185609.989338 Sisäinen mikrofoni
185609.990224 Linja sisään
185609.993780 Microphone devices:
185609.999644 Camera_HasAudio = 0
185610.000253 iSight Sisäänrakennettu
185610.001371 Sisäinen mikrofoni
185610.002618 Linja sisään
185610.004677 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185610.005235 BWD bandwidth: 445 kbits up, 468 kbits down.
185610.005539 videoNetworkCapable: 1 -- 3 max participants.
185610.005750 audioNetworkCapable: 1 -- 9 max participants.
185610.006038 vcCapabilities returns: 0x0000001f
185610.006306 VCCapAudio
185610.006494 VCCapVideo
185610.006670 VCCapMultiAudio
185610.006830 VCCapMultiVideo
185610.006999 VCCapMultiAudioHost
185610.017356 Camera_HasAudio = 0
185610.018534 Diffusion prefilter disabled
185610.019653 Temporal prefilter disabled
185610.020353 startPreview returned 0
185610.246234 VCDelegate conforms to VideoConferenceDelegate protocol.
185610.246504 setLocalUserName: [email protected]
185610.246738 ( ) setValidatedIdentity: [00000000]
185610.484041 Updating local frame notification.
185610.505527 Found 1 cameras:
185610.506223 iSight - 2857630788957422
185610.506822 selectedCamera returned iSight
185610.509889 Microphone devices:
185610.510561 Camera_HasAudio = 0
185610.511032 iSight Sisäänrakennettu
185610.512038 Sisäinen mikrofoni
185610.512794 Linja sisään
185610.513875 Selected mic: Sisäänrakennet / imic
185610.515986 Found 1 cameras:
185610.538016 iSight - 2857630788957422
185610.541768 selectedCamera returned iSight
185610.544617 Microphone devices:
185610.545694 Camera_HasAudio = 0
185610.546398 iSight Sisäänrakennettu
185610.547749 Sisäinen mikrofoni
185610.549249 Linja sisään
185610.550480 Selected mic: Sisäänrakennet / imic
185610.566895 Found 1 cameras:
185610.567504 iSight - 2857630788957422
185610.567942 selectedCamera returned iSight
185610.598208 Microphone devices:
185610.598987 Camera_HasAudio = 0
185610.599405 iSight Sisäänrakennettu
185610.600395 Sisäinen mikrofoni
185610.605420 Linja sisään
185610.606595 Selected mic: Sisäänrakennet / imic
185610.887059 SNATMAP Configuration Data: snatmap://snatmap.mac.com:5678
185610.887146 acquireSNATMAPConfigurationProc: Refresh UPnP status via SIP
185610.887587 SIPUpdateExternalInfo, force = 0
185610.887993 Transport(UDP) Thread start...
185610.922366 Sending SNATMAP heartbeat to 11FAF895:5678
185611.034312 Microphone devices:
185611.034395 Camera_HasAudio = 0
185611.034563 iSight Sisäänrakennettu
185611.034772 Sisäinen mikrofoni
185611.034808 Linja sisään
185611.036584 Microphone devices:
185611.036629 Camera_HasAudio = 0
185611.036712 iSight Sisäänrakennettu
185611.036907 Sisäinen mikrofoni
185611.036942 Linja sisään
185611.038972 Microphone devices:
185611.039013 Camera_HasAudio = 0
185611.039118 iSight Sisäänrakennettu
185611.039377 Sisäinen mikrofoni
185611.039418 Linja sisään
185611.040876 Microphone devices:
185611.040908 Camera_HasAudio = 0
185611.040979 iSight Sisäänrakennettu
185611.041128 Sisäinen mikrofoni
185611.041158 Linja sisään
185611.043801 Microphone devices:
185611.043860 Camera_HasAudio = 0
185611.043968 iSight Sisäänrakennettu
185611.044153 Sisäinen mikrofoni
185611.044187 Linja sisään
185611.045709 Microphone devices:
185611.045744 Camera_HasAudio = 0
185611.045814 iSight Sisäänrakennettu
185611.046424 Sisäinen mikrofoni
185611.046468 Linja sisään
185611.048000 Microphone devices:
185611.048038 Camera_HasAudio = 0
185611.048116 iSight Sisäänrakennettu
185611.048312 Sisäinen mikrofoni
185611.048345 Linja sisään
185611.053033 Microphone devices:
185611.053109 Camera_HasAudio = 0
185611.053228 iSight Sisäänrakennettu
185611.053932 Sisäinen mikrofoni
185611.053984 Linja sisään
185611.055690 Microphone devices:
185611.055733 Camera_HasAudio = 0
185611.055818 iSight Sisäänrakennettu
185611.055982 Sisäinen mikrofoni
185611.056014 Linja sisään
185611.057544 Microphone devices:
185611.057577 Camera_HasAudio = 0
185611.057648 iSight Sisäänrakennettu
185611.057800 Sisäinen mikrofoni
185611.057831 Linja sisään
185611.059749 Microphone devices:
185611.059791 Camera_HasAudio = 0
185611.059872 iSight Sisäänrakennettu
185611.060046 Sisäinen mikrofoni
185611.060077 Linja sisään
185611.061622 Microphone devices:
185611.061659 Camera_HasAudio = 0
185611.061732 iSight Sisäänrakennettu
185611.061883 Sisäinen mikrofoni
185611.061913 Linja sisään
185611.063394 Microphone devices:
185611.063428 Camera_HasAudio = 0
185611.063497 iSight Sisäänrakennettu
185611.063643 Sisäinen mikrofoni
185611.063672 Linja sisään
185611.066617 Microphone devices:
185611.066673 Camera_HasAudio = 0
185611.066776 iSight Sisäänrakennettu
185611.067227 Sisäinen mikrofoni
185611.067271 Linja sisään
185611.068950 Microphone devices:
185611.068987 Camera_HasAudio = 0
185611.069074 iSight Sisäänrakennettu
185611.069268 Sisäinen mikrofoni
185611.069303 Linja sisään
185611.070700 Microphone devices:
185611.070729 Camera_HasAudio = 0
185611.070797 iSight Sisäänrakennettu
185611.070943 Sisäinen mikrofoni
185611.070972 Linja sisään
185611.073651 Microphone devices:
185611.073709 Camera_HasAudio = 0
185611.073900 iSight Sisäänrakennettu
185611.074105 Sisäinen mikrofoni
185611.074137 Linja sisään
185611.077101 Microphone devices:
185611.077164 Camera_HasAudio = 0
185611.077282 iSight Sisäänrakennettu
185611.077535 Sisäinen mikrofoni
185611.077574 Linja sisään
185611.079754 Microphone devices:
185611.079804 Camera_HasAudio = 0
185611.079903 iSight Sisäänrakennettu
185611.080082 Sisäinen mikrofoni
185611.080115 Linja sisään
185611.081523 Microphone devices:
185611.081552 Camera_HasAudio = 0
185611.081618 iSight Sisäänrakennettu
185611.081762 Sisäinen mikrofoni
185611.081792 Linja sisään
185611.121455 Microphone devices:
185611.122034 Camera_HasAudio = 0
185611.122425 iSight Sisäänrakennettu
185611.124169 Sisäinen mikrofoni
185611.125123 Linja sisään
185611.127666 Microphone devices:
185611.128187 Camera_HasAudio = 0
185611.128587 iSight Sisäänrakennettu
185611.129647 Sisäinen mikrofoni
185611.130244 Linja sisään
185611.132819 Microphone devices:
185611.134250 Camera_HasAudio = 0
185611.135216 iSight Sisäänrakennettu
185611.136205 Sisäinen mikrofoni
185611.136834 Linja sisään
185611.139475 Microphone devices:
185611.139950 Camera_HasAudio = 0
185611.140296 iSight Sisäänrakennettu
185611.141079 Sisäinen mikrofoni
185611.141615 Linja sisään
185611.166215 SNATMAP heartbeat resulted in IP change (from: 0 to: C1E5E663)
185611.166278 SNATMAP heartbeat resulted in port change (from: 0 to: 5060)
185612.167249 UPnP not found (-3)
185612.171190 SIPUpdateExternalInfo, force = 0
185612.171685 count of local IP's = 2
185612.171957 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
185612.172156 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
185612.172352 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
185612.173468 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
185622.137382 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.138294 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.138712 videoNetworkCapable: 1 -- 3 max participants.
185622.139590 audioNetworkCapable: 1 -- 9 max participants.
185622.140080 vcCapabilities returns: 0x0000001f
185622.140369 VCCapAudio
185622.140561 VCCapVideo
185622.140722 VCCapMultiAudio
185622.140873 VCCapMultiVideo
185622.142572 VCCapMultiAudioHost
185622.156043 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.156628 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.156950 videoNetworkCapable: 1 -- 3 max participants.
185622.157183 audioNetworkCapable: 1 -- 9 max participants.
185622.157453 vcCapabilities returns: 0x0000001f
185622.157698 VCCapAudio
185622.157875 VCCapVideo
185622.158024 VCCapMultiAudio
185622.158272 VCCapMultiVideo
185622.158449 VCCapMultiAudioHost
185622.165188 Invoke delegate method vcc:initiateConferenceStartedForParty:(tapiopihlava2)
185622.165935 ### NEW STATE: to: VC_SIGNALING, from: VC_IDLE
185622.166598 initiateConferenceCallUsingRemoteIPAndPortData - start
185622.167128 [ipAndPortData length] = 160
185622.167895 Length is valid: YES
185622.168283 CALLEE: ifname=[external], IP=[80.223.48.120], wPort = 5060
185622.168547 CALLEE: ifname=[en0(IPv6)], IP=[fe80:0004:0000:0000:020d:93ff:fec2:a986], wPort = 5060
185622.168809 CALLEE: ifname=[en0], IP=[192.168.0.103], wPort = 5060
185622.169066 ( )( )( ) ---- <nil> valid returned 0
2006-02-06 18:56:22.170 iChat[890] IPAndPortList: ({ip = "80.223.48.120"; port = 5060; }, {ip = "192.168.0.103"; port = 5060; })
185622.170164 =========== OpenPorts!
185622.362532 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.364353 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.364681 videoNetworkCapable: 1 -- 3 max participants.
185622.364885 audioNetworkCapable: 1 -- 9 max participants.
185622.365149 vcCapabilities returns: 0x0000001f
185622.365391 VCCapAudio
185622.365562 VCCapVideo
185622.365711 VCCapMultiAudio
185622.365858 VCCapMultiVideo
185622.366002 VCCapMultiAudioHost
185622.656162 Public mapping: 193.229.230.99:16384
185622.879503 Public mapping: 193.229.230.99:16385
185623.444910 Public mapping: 193.229.230.99:16386
185623.860324 Public mapping: 193.229.230.99:16387
185623.874400
VideoConferenceFramework version 245.0 - 02102005 - Dec 15 2005
185623.875487 Checking H263 hardware rules
185623.876060 Satisfied rule #4 (30:1)
185623.877092 selectedCamera returned iSight
185623.884938 * Caller SDP *
185623.886009 v=0
o=ville 0 0 IN IP4 %RTP-IP%
[email protected]
c=IN IP4 %RTP-IP%
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio %ARTP-PORT% RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video %VRTP-PORT% RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO %ARTCP-PORT% VIDEO %VRTCP-PORT%
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185623.886877 SIPConnect start...
185623.889046 TAInviteClientProc Thread start...
185623.889850 ( )( )( )( )( ) TP IS BINARY? (0)
185623.890303 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185623.890537 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185624.392078 ( )( )( )( )( ) TP IS BINARY? (0)
185624.393194 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185624.394457 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185625.397658 ( )( )( )( )( ) TP IS BINARY? (0)
185625.398766 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185625.399296 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185625.892455 Dialog(CREATED) Match(STATUS) [8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22]=[8145be4e-9731-11da-b767-f3451 e6113c4@10-0-0-22], [1532351692]=[1532351692]
185625.893480 TAInviteClientProc Thread end(800B0017)...
185625.894096 SIPConnect stop(900A0015)...
185625.894489 SIPConnect start...
185625.895221 TAInviteClientProc Thread start...
185625.895918 ( )( )( )( )( ) TP IS BINARY? (0)
185625.896499 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185625.896748 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185626.398285 ( )( )( )( )( ) TP IS BINARY? (0)
185626.399598 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185626.400034 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185627.403907 ( )( )( )( )( ) TP IS BINARY? (0)
185627.407726 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185627.408136 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185627.897341 Dialog(CREATED) Match(STATUS) [82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22]=[82780e7a-9731-11da-b767-a80aa ba613c4@10-0-0-22], [1854864533]=[1854864533]
185627.898634 TAInviteClientProc Thread end(800B0017)...
185627.900651 SIPConnect stop(900A0015)...
185627.901212 SIP connect returned 21
185627.902477 SIPCloseCall start...
185627.902912 (SIP.c:3322) Cannot find call ID(2)
185627.903671 SIPCloseCall stop(800C0016)...
185627.904006 ### NEW STATE: to: VC_IDLE, from: VC_SIGNALING
185627.904247 ++++++++ confStatusMapRemoveAll
185627.904434 ( ) -- mapUserIDToSecurityInfo cleared --
185627.904619 Preparing to send VCInitiateConferenceCompleted
185627.904842 Invoke delegate method vcc:initiateConferenceCompletedForParty:(tapiopihlava2) - retcode: -8
185627.910736 SIPUpdateExternalInfo, force = 0
185627.911922 count of local IP's = 2
185627.912335 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
185627.912559 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
185627.912806 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
185627.912978 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
185627.913185 sendPing: 80.223.48.120:5060
185627.913404 Sending SNATMAP heartbeat to 50DF3078:5060
185627.913731 Sending SNATMAP heartbeat to 50DF3078:5060
185627.914107 Sending SNATMAP heartbeat to 50DF3078:5060
185627.914425 sendPing: 192.168.0.103:5060
185627.914689 Sending SNATMAP heartbeat to C0A80067:5060
185627.915221 Sending SNATMAP heartbeat to C0A80067:5060
185627.915564 Sending SNATMAP heartbeat to C0A80067:5060
185634.876688 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185634.878098 BWD bandwidth: 445 kbits up, 468 kbits down.
185634.878441 videoNetworkCapable: 1 -- 3 max participants.
185634.879209 audioNetworkCapable: 1 -- 9 max participants.
185634.879652 vcCapabilities returns: 0x0000001f
185634.879945 VCCapAudio
185634.880129 VCCapVideo
185634.880285 VCCapMultiAudio
185634.880433 VCCapMultiVideo
185634.880574 VCCapMultiAudioHost
185638.106335 Connection closed from the child process
185638.115266 cancelPreview returned 0
185638.116545 MULTIPOINT VC_API OVERRIDE: endConference
185638.117034 userIDToCallIDMap count = 0
185638.117308 ++++++++ confStatusMapRemoveAll
185638.117511 ( ) -- mapUserIDToSecurityInfo cleared --
185638.222629 Found 1 cameras:
185638.223364 iSight - 2857630788957422
185638.223767 selectedCamera GUID returned iSight
185638.226179 Microphone devices:
185638.226723 iSight Sisäänrakennettu
185638.227581 Sisäinen mikrofoni
185638.228156 Linja sisään
185638.228705 Selected mic: Sisäänrakennet / imic
185638.229534 Found 1 cameras:
185638.229992 iSight – 2857630788957422
… The rest isn’t probably that important.
So what the dell is going on !? Could somebody pleeaaase help me? Pleaseeeee.
3.1.1 Mac OS X (10.4.4)

Hi
I made a couple of changes hope they work.
A-Link:
IP = 10.0.0.2
Subnet = 255.255.255.0
NAT = Enabled (only way to get AirTunes to work)
Firewall = Disabled>>>>>>>>>>>>>>>>>>>>>>>>>>Enable firewall
Port forward = Disabled (tried it but no difference)>>>>>>>Enable go here for info http://www.portforward.com/english/routers/port_forwarding/A-Link/roadrunner44b/ iChat.htm
DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
UPnP = Don’t have it
Airport Express:
IP = 10.0.0.3
Subnet = 255.255.255.0
NAT = Disabled>>>>>>Enable
DHCP = Disabled
PowerBook (10.4.4):
IP = 10.0.0.22 (using dhcp)
Subnet = 255.255.255.0
Firewall = Off (On or off no difference. Yes, I added all the necessary ports)>>>>>>>>>>>>>>Turn on and untick any ports you put in for iChat
QuickTime Streaming Speed is set to match my Download
iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
Tried 10.4.4 combo installer but no luck.
Tony

Please help me with a simple flash game problem

I am trying to learn how to make flash games with Adobe flash 5.5. I am doing a tutorial from a book and am stuck.
The game is called concentration and you are suppose to match 2 tiles of the same shape. there are 10 shape tiles
and 1 question mark tile. These tiles are held in an array. 20 tiles are suppose to be displayed 5 to a row with 4 rows
and the question mark is suppose to be up on all 20. My problem is I get a blank screen when I test the movie. I
think the code is good but I beleive I have not uploaded the tiles right. I did upload the 11 tiles to the library and have
those 11 tiles and tile_movieclip in the library. Here is the code:
package {
// importing classes
import flash.display.Sprite;
// end of importing classes
public class Main extends Sprite {
public function Main() {
// variables and constants
const NUMBER_OF_TILES:uint=20;
const TILES_PER_ROW:uint=5;
var tiles:Array=new Array();
var tile:tile_movieclip;
// end of variables and constants
// tiles creation loop
for (var i:uint=0; i<NUMBER_OF_TILES; i++) {
tiles.push(Math.floor(i/2));
trace("My tiles: "+tiles);
// end of tiles creation loop
// shuffling loop
var swap,tmp:uint;
for (i=NUMBER_OF_TILES-1; i>0; i--) {
swap=Math.floor(Math.random()*i);
tmp=tiles[i];
tiles[i]=tiles[swap];
tiles[swap]=tmp;
trace("My shuffled tiles: "+tiles);
// end of shuffling loop
// tile placing loop
for (i=0; i<NUMBER_OF_TILES; i++) {
tile=new tile_movieclip();
addChild(tile);
tile.cardType=tiles[i];
tile.x=5+(tile.width+5)*(i%TILES_PER_ROW);
tile.y=5+(tile.height+5)*(Math.floor(i/TILES_PER_ROW));
tile.gotoAndStop(NUMBER_OF_TILES/2+1);
// end of tile placing loop
Can someone please explain to me what I am suppose to do to make the this work? I beleive the problem is it doesnt know where the tiles are.
Thanks.

To create the tiles, draw 10 distinct shapes in the first 10 frames of your symbol, and
the back of the tile in the 11th frame. You are free to draw them as you want, but I suggest you make them as 90 pixels squares with registration point (starting x and y position) at 0, because these are the properties of the tiles used in this chapter's
examples. At least, they should all be the same size.
It didnt say put in a library. It is saying to draw them in frames of symbol but it didnt walk me through that. Can you guide me through this? I also was looking at how to add the link identifier but it said I need a popup window but I cant see one. I thought that was done
when I went to insert new symbol. It said something about actionscript linkage. I am familliar with perl, java and c++ so I can follow the code so far but I dont have much understanding of the flash interface. I made the 10 shape tiles and the 1 question mark tile
in paint. They are .jpeg images.

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

Someone, anyone, please help me with my Nokia 6600

My Nokia 6600 displays:
SysApp: Unable to perform operation.Delete some data first.
I dont have running applications except the phone itself. I still have enough memory in my drive C, D, and E.
I have reformatted my handset and MMC but it still has the same problem.
What must I do? Is it a virus? Please help me.

it is not very likely that it is a virus as you would have to allow it on your handset say by accepting bluetooth files from people you don't know or using cracked apps. did you update your firmware to the latest one possible? perhaps try this and see if it solves this issue. if not the only thing for you left to do is to go to nokia care and have them have a look at your phone.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.It mainly seems to be with games.

RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan

Hey!!Can someone please help me with my NOKIA N79

Hey!!
Whenever I try to connect to the internet or try connecting to maps it asks for ACCESS POINT USER NAME AND ACCESS POINT PASSWORD
can anyone please help me with this problem

Take it back to the people who replaced the screen. Your symptoms indicate the wifi antenna was not reconnected correctly

Please help me with my nokia 3250

hello people my first post here.
i have a problem with my port on the 3250. when i connect the phone to the computer it works perfectly.
BUT when i connect any audio headset i can only hear the left ear but the right ear doesnt work...ARRGH....this happens to all the audio connections i have. please help. its a cracking phone but this problem has let me down big time.

Hi,
I'm making the assumption here that you are using the audio cable that came with the 3250 (the one with the 3.5mm socket for your own headphones), so with that in mind...this may seem a little obvious (for this I apologies) but have you made sure that the headphones are FULLY pushed into the socket?
I've found that in the past that if a headphones jack isn't fully engaged in the socket, you tend to only get sound in one of the ear-pieces.
Hope this helps.

Very Urgent Please Help Me with XML parsing(DOM parser)

Hi
Please help me with the following code.
I have an XML file
<catalog>
<book id="101">
<title>First Ex With ID 101</title>
<ID>500</ID>
<author>RAJU</author>
<price>39.95</price>
</book>
<book id="121">
<ID>501</ID>
<title>First Ex With ID 121</title>
<author>RAJU1</author>
<price>19.95</price>
</book>
</catalog>
By using DOM parser I have to retrive ID values .After getting this ID values i have to pass these values in someother method of someother class.What i suppose to do?Can anyone help me with this regards ,if possible plese write the code..
Regards
Raju G

Well first up all create a parser class where u parse the document using DOm and get the id node and assigen it to a String sat str.
Now whatever processiong u want to do , u write in a separate class (say Process.java) in one method say doProcess(String str)
Now from parser class u just call the doProcess() method with passing str as a parameter.
eg.
Process p = new Process();
p.doProcess(str);
Hope this will help u.
....yogesh

Please tell me that nokia e71 supports 32 GB memor...

please tell me does Nokia e71 support 32 GB memory cards or not

pgangwani35 wrote:
please tell me does Nokia e71 support 32 GB memory cards or not
Listed here as compatible:http://europe.nokia.com/find-products/accessories/all-accessories/memory-cards-and-cables/memory-car...
Happy to have helped forum with a Support Ratio = 42.5

Please help me with Nokia E71 very strange problem...

Similar Messages

Maybe you are looking for