Please, HELP ME... "ZENworks Repoting Server installation f"

(Sorry was mistake send to the Politic forum)
Server:
#cat /proc/version
Linux version 2.6.16.60-0.42.5-smp (geeko@buildhost) (gcc version 4.1.2 20070115 (SUSE Linux)) #1 SMP Mon Aug 24 09:41:41 UTC 2009
# uname -a
Linux zcm0 2.6.16.60-0.42.5-smp #1 SMP Mon Aug 24 09:41:41 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux
# rpm -qa | grep -i zenwork
novell-zenworks-java-links-1.5.0_11-1
novell-zenworks-addon-image-langs-server-10.2.1-33465
novell-zenworks-configure-server-10.2.1.34436-34436
novell-zenworks-inventory-server-10.2.1-33465
novell-zenworks-policies-langs-server-10.2.1-33465
novell-zenworks-reports-server-10.2.1-34436
novell-zenworks-uninstall-10.2.1-33465
novell-zenworks-zmgexplorer-10.2.1-32627
novell-zenworks-znews-server-10.2.1-33465
novell-zenworks-bundles-langs-server-10.2.1-33465
novell-zenworks-discovery-langs-server-10.2.1-33465
novell-zenworks-managed-devices-langs-server-10.2.1-33465
novell-zenworks-primary-agent-10.2.1-31704
novell-zenworks-temp-extras-server-10.2.1-34617
novell-zenworks-zencore-agent-10.2.1-31891
novell-zenworks-zmgpxeclientfiles-10.2.1-32627
novell-zenworks-actions-10.2.1-30006
novell-zenworks-asset-management-langs-server-10.2.1-33465
novell-zenworks-certificate-authority-server-10.2.1-33465
novell-zenworks-core-server-10.2.1-34693
novell-zenworks-deployment-server-10.2.1-34693
novell-zenworks-java-utilities-server-10.2.1-33465
novell-zenworks-patch-management-10.2.1-1000
novell-zenworks-preboot-langs-server-10.2.1-33465
novell-zenworks-remote-management-server-10.2.1-33465
novell-zenworks-system-update-10.2.1.5432-32066
novell-zenworks-temp-extras-langs-server-10.2.1-33465
novell-zenworks-xplat-pre-agent-10.2.1-32192
novell-zenworks-zmediacreator-10.2.1-32627
novell-zenworks-zmgservices-10.2.1-32627
novell-zenworks-zmgupdate-10.2.1-32627
novell-zenworks-version-10.2.1-34731
novell-zenworks-jsvc-5.5.20-1
novell-zenworks-common-libs-10.2.0-21306
novell-zenworks-addon-image-server-10.2.1-33465
novell-zenworks-bundle-10.2.1-31873
novell-zenworks-certificate-authority-langs-server-10.2.1-33465
novell-zenworks-core-langs-server-10.2.1-33465
novell-zenworks-deployment-langs-server-10.2.1-33465
novell-zenworks-java-utilities-langs-server-10.2.1-33465
novell-zenworks-policies-server-10.2.1-33465
novell-zenworks-zcm-server-10.2.1-33465
novell-zenworks-preboot-server-10.2.1-33465
novell-zenworks-remote-management-langs-server-10.2.1-33465
novell-zenworks-system-update-server-10.2.1-34646
novell-zenworks-thirdpartyimagingutils-10.2.1-32627
novell-zenworks-zmgbootcd-10.2.1-32627
novell-zenworks-zmgmcast-10.2.1-32627
novell-zenworks-zmgweb-10.2.1-32627
novell-zenworks-tomcat-5.5.23-11
novell-zenworks-common-jars-10.2.0.22715-22715
novell-zenworks-bundles-server-10.2.1-33465
novell-zenworks-discovery-server-10.2.1-33465
novell-zenworks-managed-devices-server-10.2.1-33465
novell-zenworks-pre_pkg-10.2.1-33465
novell-zenworks-system-update-langs-server-10.2.1-33465
novell-zenworks-zcm-langs-server-10.2.1-33465
novell-zenworks-zmgpolicy-10.2.1-32627
novell-zenworks-asset-management-server-10.2.1-33465
novell-zenworks-configure-langs-server-10.2.1-33465
novell-zenworks-inventory-langs-server-10.2.1-33465
novell-zenworks-policy-10.2.1-27420
novell-zenworks-reports-langs-server-10.2.1-33465
novell-zenworks-version-primary-server-10.2.1-34693
novell-zenworks-zmglibs-10.2.1-32627
novell-zenworks-znews-langs-server-10.2.1-33465
THis was my steps:
1 copy from the ZRM10.2.1 to the /usr/local/src/zrm
2) cd /usr/local/src/zrm
3) setup.sh
Administrator / qwerty
Zenworks Reporting Server Already Installed in this ZONE
"ZENworks 10.1.0 Reporing Server haz already been installed in this zone.
Do you want to decommission it from the then ?"
OK
BOE XI 3.1 Installation is is progress...
ZENworks service must be restarted in order to use ZENworks Reporting Server.
(*) No, I will restart the services mysel | Next
And see this error:
Installation Resullts:
ZENworks Repoting Server installation failed
Press: Done
After all this steps:
shutdown -r now
from the my Linux do:
https://myzcmserver | Reports
And see this info:
"Note: There is no ZENworks Reporting Server configured in the Management Zone."
What can i do ?
Serg

amaltsev1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Please Help! ERROR: Application Server failed. when Refreshing

    Please help on this below issue. Thanks.
    We have a requirement that using ASP.NET (C#), we need to open saved .rpt file (saved with data and the rpt file is assigned to the web page as query string) and let the users refresh themselves with latest data by clicking at refresh icon of the CrystalReportViewer. But it throws 'The Report Application Server failed' error message. What could cause this message. below is the piece of code we are using to configure the report.
    private void ConfigureCrystalReports()
    string reportPath = Server.MapPath("Reports
    SEMS0001_UBS.rpt");
    this.CrystalReportSource2.ReportDocument.Load(reportPath);
    CrystalReportViewer1.Visible = false;
    SetDBLogonForReport(this.CrystalReportSource2.ReportDocument);
    int i = 0;
    foreach (ParameterField field in this.CrystalReportSource2.ReportDocument.ParameterFields)
    field.HasCurrentValue = true;
    //this.CrystalReportSource2.ReportDocument.Refresh();
    CrystalReportViewer1.ParameterFieldInfo = this.CrystalReportSource2.ReportDocument.ParameterFields;
    CrystalReportViewer1.Visible = true;
    public void SetDBLogonForReport(ReportDocument reportDocument)
    Tables tables = reportDocument.Database.Tables;
    connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
    connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
    connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
    //foreach (CrystalDecisions.Shared.IConnectionInfo connection in reportDocument.DataSourceConnections)
    // connection.SetConnection(ConfigurationManager.AppSettings["DBServer"], "", ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
    // connection.SetLogon(ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
    foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
    TableLogOnInfo tableLogonInfo = table.LogOnInfo;
    tableLogonInfo.ConnectionInfo = connectionInfo;
    table.ApplyLogOnInfo(tableLogonInfo);
    //reportDocument.Database.Tables[0].ApplyLogOnInfo(tableLogonInfo);

    Attaching full code ... Our case is the RPT files are stored wih default parameters and saved data. We need to let users just refresh the rpt files with latest db data and overwrite with the same rpt files. But this code keep showing The application server failed mesg. when the refresh icon of viewer is clicked.
    Attaching the code as it is not properly attached in my previous reply ...
    =======================
    Begin - aspx.cs code
    =======================
    using System;
    using System.Data;
    using System.Data.OleDb;
    using System.Configuration;
    using System.Web;
    using System.Web.Security;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using System.Web.UI.WebControls.WebParts;
    using System.Web.UI.HtmlControls;
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.CrystalReports;
    using CrystalDecisions.Shared;
    using CrystalDecisions.Web;
    public partial class _Default : System.Web.UI.Page
        private ConnectionInfo connectionInfo = new ConnectionInfo();
        protected void Page_Load(object sender, EventArgs e)
            if (!IsPostBack)
                //ConfigureCrystalReports();
        protected void  CrystalReportViewer1_Init(object sender, EventArgs e)
            ConfigureCrystalReports();
        private void ConfigureCrystalReports()
            string reportPath = Server.MapPath(@"Reports\Report1.rpt");
            this.CrystalReportSource1.ReportDocument.Load(reportPath);
            CrystalReportViewer1.Visible = false;
            SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
            foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
                field.HasCurrentValue = true;
            //this.CrystalReportSource1.ReportDocument.Refresh();
            CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
            CrystalReportViewer1.Visible = true;
        public void ReportDocument_RefreshReport(object sender, EventArgs e)
            try
    SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
    CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
                this.CrystalReportSource1.ReportDocument.SetDatabaseLogon("user", "passwd", "server", "");
                foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
                    field.HasCurrentValue = true;
                    field.AllowCustomValues = true;
                    //field.EnableNullValue = true;               
                this.CrystalReportSource1.ReportDocument.Refresh();
                       this.CrystalReportSource1.ReportDocument.SaveAs(@"C:\Inetpub\wwwroot\XsiteRpt\Reports\Report1.RPT", true);
            catch (Exception ex)
                Msg.Text = ex.Message;
        public void SetDBLogonForReport(ReportDocument reportDocument)
            Tables tables = reportDocument.Database.Tables;
            connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
            connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
            connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
            foreach (CrystalDecisions.CrystalReports.Engine.Table table in reportDocument tables)
                TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                tableLogonInfo.ConnectionInfo = connectionInfo;
                table.ApplyLogOnInfo(tableLogonInfo);
    =======================
    End - aspx.cs.code
    =======================
    =======================
    Begin - Assemblies
    =======================
    <assemblies>
                        <add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.Enterprise.Framework, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
          </assemblies>
    =======================
    End - Assemblies
    =======================
    =======================
    Begin - aspx
    =======================
    <%@ Page Language="C#" AutoEventWireup="true"  CodeFile="Xsite.aspx.cs" Inherits="_Default" %>
    <%@ Register Assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
        Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" >
    <head runat="server">
        <title>Refresh Report</title>
        <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
            rel="stylesheet" type="text/css" />
        <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
            rel="stylesheet" type="text/css" />
    </head>
    <body>
        <form id="form1" runat="server">
        <div>
            <asp:Panel ID="PanelMsg" runat="server">
            <br />
            <asp:Label ID="Msg" runat="server" Font-Bold="False" Font-Names="Verdana" ForeColor="Navy"></asp:Label>
            <br />
            </asp:Panel>
            <asp:Panel ID="PanelViewer" runat="server">
            <CR:CrystalReportViewer ID="CrystalReportViewer1" OnReportRefresh="ReportDocument_RefreshReport" runat="server" AutoDataBind="True"
                EnableDatabaseLogonPrompt="False" EnableParameterPrompt="False" ReuseParameterValuesOnRefresh="True" HasRefreshButton="True" Height="820px" OnInit="CrystalReportViewer1_Init" ReportSourceID="CrystalReportSource1" ShowAllPageIds="True" Width="1215px" />
            <CR:CrystalReportSource ID="CrystalReportSource1" runat="server">           
            </CR:CrystalReportSource>
            </asp:Panel>
        </div>
        </form>
    </body>
    </html>
    =======================
    End - aspx
    =======================

  • Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."

    Hello Gurus,
    I have an html form that allows putting in a parameter. Upon
    submit the form, it'll pass a string URL with the parameter to a
    new browser.
    My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
    diary&14252
    I also used keymap looks like this
    diary: report=Diary.rdf server=servername desformat=pdf
    destype=cache userid=id/psswd@db myoid=%1 %*
    But I get an Error: The requested URL was not found, or cannot
    be served at this time. Oracle Reports Server CGI - Reports
    Server name is not specified.
    However, if I move the cursor to the end of the same url (or put
    a space at the end) and hit Enter, then the report is
    displayed. I guess there must be something wrong with my
    configuration. Please help. I appreciated any inputs from you.
    Thanks in advance.
    Ashley

    I found the solution to my problem. It was nothing to do with
    the cgicmd.dat keymap file, but the html form itself. It's
    confused between the url arguments and form arguments from the
    submit button. So, what I did was open a new window with all
    arguments instead of using the submit function.
    Regards,
    Ashley

  • Please HELP me!, NT WebDB installation problem

    Hi!
    I have been trying to install web db, I have not been able to do
    it because of the following problem.
    When i get to the "Oracle Installation Settings", Name drop-down
    list contains only "EM_V20" (Enterprise Manager)(and the
    location points to the location of enterprise manager
    (D:\EM_V20)). So, I cannot select any database to install Web
    db. And when I continue regardless of what i got, it asks for
    the sys password ( I don't know which database it is asking for,
    anyway I changed all the database sys passwords to a unique
    password say xxx), and I submit xxx, but it did not accept ( Not
    a surprise), And it corrupted my enterprise manager also.
    So, How can I install web db to my database say "sample" or how
    I can choose my database.. (In your Oracle web db installation
    handbook, it says choose DEFAULT_HOME, but I got only EM_V20).
    Please help me...
    Thank you..
    null

    Hi Murat:
    I think you need to install Oracle 7 or 8 before you install
    webdb. Using CHANGE_ON_INSTALL as a password for SYS.
    Good luck
    Chen
    Murat (guest) wrote:
    : Hi!
    : I have been trying to install web db, I have not been able to
    do
    : it because of the following problem.
    : When i get to the "Oracle Installation Settings", Name
    drop-down
    : list contains only "EM_V20" (Enterprise Manager)(and the
    : location points to the location of enterprise manager
    : (D:\EM_V20)). So, I cannot select any database to install Web
    : db. And when I continue regardless of what i got, it asks for
    : the sys password ( I don't know which database it is asking
    for,
    : anyway I changed all the database sys passwords to a unique
    : password say xxx), and I submit xxx, but it did not accept (
    Not
    : a surprise), And it corrupted my enterprise manager also.
    : So, How can I install web db to my database say "sample" or how
    : I can choose my database.. (In your Oracle web db installation
    : handbook, it says choose DEFAULT_HOME, but I got only EM_V20).
    : Please help me...
    : Thank you..
    null

  • Please help - cannot complete itunes 6 installation

    Here's my deal:
    I have Windows 2000, service pack 4 on an IBM T22, with plenty of hard disk space left and I have had the older version of iTunes (5 i guess) on my computer since I upgraded about a year ago (got iTunes a little over a year ago with my mini iPod). I had trouble then, but somehow got it to work, until now, when I was prompted to upgrade (could not download music otherwise), so I tried to do that, but it failed. One of two things happens: either I get a message that says 1628: Failure to complete installation, OR it just stops installing and I get a box in the minimize bar at the bottom of my desktop that appears to be a dialogue box for QuickTime and iTunes, but that, when clicked on, does not appear (maximize) on my screen. I have now uninstalled QuickTime, iTunes, and my setup.exe, and have tried reinstalling, but the same two things keep happening. I fear that I have lost the ability to install, since the setup.exe is now gone from my desktop. Also, I already tried the suggestions about the 1628 error provided by apple (clearing temp files etc.) and nothing seems to help.
    Please help me! I don't have a clue about what to do and am very very frustrated.

    hi Kelsey!
    It seems to hiccup right in the middle of the box that says "preparing InstallShield Wizard, which will guide you through the setup process / preparing to install" portion...and then it just stops.
    gaah. okay, first check to make sure your Windows Installer engine is up to date:
    http://docs.info.apple.com/article.html?artnum=93976
    then let's try this again
    b with all background applications switched off:
    http://consumer.installshield.com/kb.asp?id=Q108379
    antivirus, antispyware, Cygwin and various other applications have been implicated with these hangs ... so i reckon it's safest to try to switch all of 'em off prior to the install.
    keep us posted.
    love, b

  • Please Help! 3-Weeks Since Installation and Still ...

    It's just over 3 weeks since I had my broadband moved to my new address and I'm still getting a shockingly-bad connection. All the way through my 10-day stabilisation period it was really poor (always well below 100kbps down) but I waited the full 10 days before calling India when they told me to wait another 3 days. After that extra 3 days I called again and they ran a line test and identified an issue which they described as a 'configuration mismatch which happens every 1 in a 100' - I couldn't understand his exact explanation for the issue was but he told me it had to be corrected at the exchange and to give it 48-72 hours for it to be fixed. After waiting three days and seeing zero change, I called back was told that it had been fixed but I had to wait another 48-72 hours for it to stabilize. So I waited 3 more days. saw no change and called again... this time another guy did another line test and ran through the usual questions, he identified some issue with the line (the same issue?) and said he had reported it the team that deal with line faults. I was told I'd get a call within a few days and that someone would either fix the problem or an engineer would visit. I did get a call back... the call came from India so I'm not sure if that was _the_ call or if it was just a follow-up to one of the earlier support calls (I was expecting call from UK?). Whatever it was, the lady said that the issue had been corrected at the exchange and that I should see a big impovement over the next 48-72 hours. I'm just about at the end of that period now and I'm again seeing no difference whatsoever. I'm dreading the prospect of another support call which results in another non-existant fix which takes another 48-72 hours and makes no difference.
    I dont know if anyone can help and if so what info you'd need?
    Here's some basic info about my setup, the results of my speedtest and some info from the homehub etc...
    I'm on the Unlimited Option 3 (or at least I should be).
    My homehub is the v1, i.e. white box with the 5 lights (phone, wireless, broadband, internet, data).
    Wireless is now disabled on the homehub and I'm using the ethernet cable to my PC.
    I've tried all the phone sockets in the flat and get the same result from all of them.
    I've tried the connetion on my desktop, laptop and even via the wireless on my mobile, it's the same on all three.
    Samknows puts me about 1.6 miles from my local exchange at Moortown (MYMOO)
    I've tried the noise test on my line using the number I found on this forum, didn't hear anything at all.
    I've tried disconnecting my Sky box from the telephone (which is in a different room) but still no joy.
    The homehub has been up for the most part - I've only restarted it three times, twice at the instruction of the guys at BT support and once myself.
    Home Hub Stuff...
     Home page connection details...
      Downstream: 4,015 Kbps
      Upstream: 768 Kbps
      Connection time: 0 days, 2:55:41
      Data transmitted: 3.85 MB
      Data received: 16.64 MB  
     Status > ADSL Line > Details...
      Uptime: 0 days, 2:50:26
      Modulation: G.992.5 annex A
      Bandwidth (Up/Down) [kbps/kbps]: 768 / 4,015
      Data Transferred (Sent/Received) [MB/MB]: 3.83 / 16.62
      Output Power (Up/Down) [dBm]: 12.0 / 19.0
      Line Attenuation (Up/Down) [dB]: 19.5 / 40.5
      SN Margin (Up/Down) [dB]: 5.0 / 6.5
      Vendor ID (Local/Remote): TMMB / TSTC
      Loss of Framing (Local/Remote): 0 / 0
      Loss of Signal (Local/Remote):    0 / 0
      Loss of Power (Local/Remote): 0 / 0
      Loss of Link (Remote):    0
      Error Seconds (Local/Remote): 10,167 / 0
      FEC Errors (Up/Down): 0 / 0
      CRC Errors (Up/Down): 323 / 593,103
      HEC Errors (Up/Down): 14 / 564,577
      Line Profile:    Fast
    Status > Internet Connection...
      Uptime: 0 days, 2:52:30
      Data Transferred (Sent/Received) [MB/MB]: 2.94 / 9.85
      Connection Settings    
      VPI/VCI: 0 / 38
      Type:    PPPoA
    BT Speedtest Results...
    I was hoping to just upload a screenshot but thats impossible for me, so I'll have to type the results instead:
    "The test comprises of Best Effort Test:
    Download Speed 106 Kbps
    Download speed acheived during this test was - 106 Kbps
    For your connection, the acceptable range of speeds is 600-7150 Kbps
    Additional information
    Your DSL Connection Rate: 4148 Kbps (DOWN-STREAM), 768 Kbps (UP-STREAM)
    IP Profile for your line is - 3000Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 3.77:5.66:90.57 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic
    This test was not conclusive and further testing is required. This might be useful for your ISP to investigate the fault."
    And Finally, SpeedTest.net...
    As the subject says, "Please Help!"

    Hi JoeFoulkes
    Certainly looks like something’s up here, your downstream speed doesn’t seem to be too bad but throughput speed is really letting you down.  I take it this is at all time of the day?
    Not too sure what has been tried by our tech guys so far but if you drop me an email with a few details then I can have a look and get things moving.
    Could you drop me an email to [email protected] with your BT account and telephone number and I'll sort it out.
    Cheers
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • ZENworks Single Server installation error

    Hi.
    I have a problem during the single server installation.
    Let me tell you server status.
    Server OS: MS Window server 2003 Enterprise
    SQL: MS-SQL 2005 Enterprise edition.
    with IIS and Active Directory.
    Error message show like this
    "Couldn't replace ~DSDATAFOLDER~ with "E:\Program Files\Microsoft SQL
    Server\MSSQL.1\MSSQL\DATA" in file Scripts\SQL_PSTOKEN.sql(error code -2)
    Would you let me know if you know how to figure out this?

    Originally Posted by lanoxox
    I have changed the installation procedure that was "distributed setup" in the CD.
    There was error during the "Policy Distribution Service". the message is
    "The Database STDSDB exists,but the password you entered for user account "DS_STDSDB_USER" is incorrect ,Try another passwor?"
    I could not go forward after this. and there was no account for "DS_STDSDB_USER"
    in the SQL Server. I think it could not create this account.
    Hi, how did you solve this? the TID doesn't solve this error.
    Regards.

  • Please Help Me regardign DI Server License Cost

    Hi Every One,
                         Can you please tell me about DI Server License Cost, By Default DI Server License Valid for 15 days. It is not possible after every 15 days. register DI Server with new License.
                         Any body please provide me the License cost of DI Server, for longer validity.
    Waiting for positive reply.
    Thanks in advanced.
    Shubha
    Edited by: Shubhajyoti Ghosh on Aug 6, 2008 3:38 PM

    From the license Administration --- Component tab, I found.
    License                                                                        Start Date              Expiration Date
    DI-Server (DIS)                                                               28/07/08        -        12/08/08
    Compatibility License for AddOns                                    28/07/08        -        31/12/99
    Professional User                                                           28/07/08        -        12/08/08
    SAP AddOns                                                                 28/07/08        -        12/08/08
    Software Development Kit - Development Version              28/07/08        -        31/12/99
    Software Development Kit - Implementation Version          28/07/08         -        12/08/08
    SDK Tools                                                                    28/07/08         -       12/08/08
    So according the record---- DI-Server (DIS) license validity upto : 12/08/08
    How I increase that date?
    Edited by: Shubhajyoti Ghosh on Aug 7, 2008 1:04 PM
    Edited by: Shubhajyoti Ghosh on Aug 7, 2008 1:06 PM

  • Can someone please help me making a native installer for air?

    hello, I’m a newbie in adobe flash cs6 and need step by step instructions for
    how to make a native installer to use the runtime api in adobe air 3.5
    I want to make a simple program with a button, if I press the button, a little exe file opens
    called “test.exe”
    my air profile is already extended desktop..
    (I use Windows7)
    I’ve read a lot of forums and they all say:
    Type something like this for the SDK or ATK or something in cmd:
    AirTest.airi -package -storetype pkcs12 -keystroke AirTest.p12 -target native AirTest.exe AirTest.airi
    I just kan’t figure out how to make a native installer from my air app…

    I use the NSIS for my windows native installer.
    http://nsis.sourceforge.net/Download
    If you are new to using NSIS, Venis is helpful for wizardizing your scripts:
    http://nsis.sourceforge.net/Venis_IX
    You will need to publish your app with the "-target bundle" setting

  • Please help with "500 Internal Server Error"

    Hi all,
    I get a "500 Internal Server" error when doing some processing with a Java program that makes HTTP calls into an application API deployed as WAR file on a OC4J midtier installation. The process works fine until I get a "500 Internal Server" after about 100 transactions. I can see reference to the 500 error in the Apache access_log, but that is it - no other references whatsoever in any of the logs (OPMN, OC4J, Apache, etc.).
    Can anyone point me to some sort of "500 error troubleshooting guide" or have any suggestions as to how to track the problem down?
    Thank you.
    Anton.

    Hi,
    Thanks for the reply! And yes its very frustrating. There is no other reference to this error - and I have the app and all Oracle components (oc4j & Apache) at their maximum log level.
    I have logged a SR with Oracle and off course their first response was that it "must be an issue with the 3rd party app". Needless to say the 3rd party vendor suggests I speak to Oracle...Anyway I am still working with Oracle on the SR.
    I have in the meantime upgraded to 9041, but I still get the same. I will try 9042 next. I have also started a "Plan B" workaround in my code...
    Thanks for the sympathy and any other other insights still most welcome...
    Cheers.
    Anton.

  • PLEASE HELP ME with my itunes installation

    I am so frustrated and have spent hours on this. I have windows XP on an HP computer. I have a 2nd generation click ipod and wanted to put new CD music on it. I had itunes 7 and used it frequently. A message popped up and asked me if I wanted to download the new itunes 8 so I tried, and that was a huge mistake. I have spent hours trying to get this to work. I have read through all the threads and have tried everything: uninstalling my old quicktime, uninstalling my old itunes; going to windows cleanup and removing all that have anything to do with itunes; stopped the popup protection; went to msconfig to set the computer to normal startup mode in general tabs. removed anything to do with itunes or quicktime.
    I installed the 7 version of quicktime first and then the itunes. I get an error message "quicktime failed to initialize (error-2096) reinstall....
    this is the same error message that I got before I did all of the above. I can't speak to anybody at Apple about this and don't know what to do. I had been thinking of getting the new itouch, but now I don't know. I don't even have my itunes anymore (it has been days) and who knows where my library of songs is and if they would still be in itunes somewhere. I am not computer savey and just would like this to be fixed. I would appreciate any simple help I could get to solve this problem.

    I finally got this resolved.

  • Please help track this Internal server error

    I am in the process of getting integrated development work with my projects. I am getting this error on trying to access a simple jsp page....
    Just having the jsp file extension is enough to trigger this error... I am using WL 10 and java 1.5
    Error 500--Internal Server Error
    java.lang.ClassCastException: workshop.util.filesystem.file.WlFile
         at workshop.util.filesystem.zip.ArFileSystem.createFileObject(ArFileSystem.java:401)
         at workshop.util.filesystem.zip.ArFileSystem.constructRelative(ArFileSystem.java:270)
         at workshop.util.filesystem.zip.ArFileSystem.constructNoScheme(ArFileSystem.java:257)
         at workshop.util.filesystem.FS.getInternalFile(FS.java:157)
         at workshop.util.filesystem.FS.getIFile(FS.java:181)
         at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:228)
         at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
         at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:165)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:394)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:525)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
         at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:733)
         at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:582)
         at weblogic.servlet.JSPServlet.service(JSPServlet.java:171)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

    Hi,
    Thanks for the reply! And yes its very frustrating. There is no other reference to this error - and I have the app and all Oracle components (oc4j & Apache) at their maximum log level.
    I have logged a SR with Oracle and off course their first response was that it "must be an issue with the 3rd party app". Needless to say the 3rd party vendor suggests I speak to Oracle...Anyway I am still working with Oracle on the SR.
    I have in the meantime upgraded to 9041, but I still get the same. I will try 9042 next. I have also started a "Plan B" workaround in my code...
    Thanks for the sympathy and any other other insights still most welcome...
    Cheers.
    Anton.

  • Please help 9iDS - 500 internal server error

    Hi all,
    I got the message 500 internal server error when I run report from form by using WEB.SHOWDOCUMENT. When I test it seperately, both the report and form work fine. But i got this problem when I run report from form. Is anyone have suggestions? I try so many ways but still can't solve this problem. Thank you very much.

    Hi,
    Thanks for the reply! And yes its very frustrating. There is no other reference to this error - and I have the app and all Oracle components (oc4j & Apache) at their maximum log level.
    I have logged a SR with Oracle and off course their first response was that it "must be an issue with the 3rd party app". Needless to say the 3rd party vendor suggests I speak to Oracle...Anyway I am still working with Oracle on the SR.
    I have in the meantime upgraded to 9041, but I still get the same. I will try 9042 next. I have also started a "Plan B" workaround in my code...
    Thanks for the sympathy and any other other insights still most welcome...
    Cheers.
    Anton.

  • Please Help!! WebCam Vista Installation Problems

    I would appreciate any help on installing this camera. I have Windows 98 SE running on a Pentium III HP and when i try to install the software i get a error message telling me that " the windows operating system running on this computer is not supported by this software." Pleas help i am not that good with computers in the first place so I am lost here...................................thanks

    I would run the auto update on the site and let it find your camera. Try that instead of the disc that came with camera. Start with the driver only then software later. Other than that start a support ticket.

  • Server installations

    HI,
    I am new to server installations. I know that for Portal we required WAS + JAVA, for XI WASABAPJAVA.
    So if I install WAS + JAVA, can I access portal thru url http://<epserver>:<portnumber>/irj/portal
    or any ep plugins are required. Where can I get sneak preview of EP server? How manys days it is valid?
    If I install WASABAPJAVA, after post installation activities I can run XI. On the same server can I run the portal? If not, what extra need to be done on this server to access portal?
    Please make me clear on server installations.
    Regards,
    RamKrishna.

    hi Ramkrishna,
    1. YES, if you install WAS + JAVA, can I access portal thru url http://<epserver>:<portnumber>/irj/portal
    no ep plugins are required: 
    You can get sneak preview of EP server from:
    https://websmp102.sap-ag.de/swdc
    It is valid for 30 days. At the end of which you need to uninstall and reinstall your server
    2.  Nothing extra needs to be done to access portal if you have ABAP + JAVA stack.
         ONly the admin will be different j2ee_admin instead of Administrator.
    Hope this helps
    Sumathi

Maybe you are looking for