Please help. My account with CC info has been hack...

Hi!
Last night, someone hacked my Skype account. I can still get in through my connected Microsoft Live-account, but I am not able to shut him/her out. I have even tried contacting the hacker via text message, as my account is set up with a british cell phone number now. The hacker has tried to some success to purchase skype credits totalling in the area of 500€. Luckily I try to keep as little as possible on my debit card account, but there has been some activity on my connected credit card. I have deleted what payment info I could from Skype, and Microsoft Live. However, one of my cards (Credit) can not be removed in Skype account settings due to being registered on Live. This is not correct, as I have deleted all card info from my Live account.
Please help me get my account (and money) back.
Best regards,
Sverre

If you can't get the password reset via http://iforgot.apple.com (do you remember your answers to your security questions ?) then try contacting Support in your country and see if they can get you access to it
Contacting Apple about account security : http://support.apple.com/kb/HT5699

Similar Messages

Can somebody please help? My new iPad (3) has been blacking out and restarting every min...

Ok so before i went on a vacation, i switched off my iPad that's left with 24% battery.
2 days later, i switched it on and the screen just freezes. So i pressed the home and lock button together and reset it.
After this, for every min i used, the iPad just black out and restarted on its own.
It probably restarted for more than 100 times already and i can't restore it or whatever since its just keep disconnecting from my iTunes.
I shut it down, reset it, close all the apps, none help.
Does anybody know a solution to this?
Please help.
Thanks a million

Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Help! I think my iPhone has been hacked!?

Hi, my friend and i have been texting back and fourth between imessage and text, assuming bad service, we both have iPhone 4S, we both live in Ontario, Canada, but right now she is visiting Nashville, TN. All of the sudden I get a text message from her number that is Chinese writing?!
It showed up on my phone but when she sent me a screen shot of our conversation from her end,
It doesn't show it's there? Have I been hacked? I tried to translate the Chinese text but it hardly makes sense, this is what showed up.
" 浥獳慧攠Ԡ瑯′㈶㤸㤳㌴〠獵捣敥摥搮"
"Hui eyelid redness Yì Ԡ neighbors' ㈶ sauce ㌴〠 Bei Yan Lie dǎo staying Museum"
I tried to translate it to English, but that's all I got.
Please help!!!
-Bail

Receiving a weird message is not an indication of hacking - at least not on the recipient's end. The issue in this story is, "Why did her phone send that message to you?" Even better, "What message (if any) was she trying to send?" Either there is an issue on the network, or some third party has figured out a way to send messages using someone else's number.

Help! I think my Safari has been hacked!

Guys & Gals- Not sure what to do. See the screenshot below. This popped up on on Safari this morning and I can't make it go away. There's no way for me to toggle between tabs or anything.

You are quite welcome.

How do I know If my computer has been hacked?

I think my Mac just got hacked into. I was working on a doc. that had personnel information- names. Phone #s and my home street address. my mac book pro froze up and when it unfroze, all of the names, phone#s and my address changed to ?/-\|# After I stared at the screen w disbelief for less than 1 sec. Word closed it down. After 2 min. Word brought the 2 word doc. I was working on back onto the screen. I looked at the personnel info, and saw the names, phone numbers and my street address in numbers and words. It looked like as if nobody touched my Mac. What should I do? I need help badly. If my computer has been hacked, the information they took, can they steal identity, credit card #s with just phone #s and first&last names besides my street address. I havent touched my computer since thus happened. I'm my iPhone. Should I turn off my computer? Also ididnt save the doc. I was working on. a box came up and said "this file is read-only. To save a copy, click OK and give the document a new namein the Save dialog box( AutoRecovery save of document1)". What should I do? I'm not making this up. I watched everything without realizing what happened. Should I have turned my computer off while it was in the middle of the proscess? Help! Help!

You have not been hacked. Something went wrong with Word and it crashed, and something must have reopened Word. (The system will usually ask if you want to reopen a crashed app... did you see such a message?) Word must have simply reopened the docs you had open when it crashed.
It's actually quite difficult to hack a Mac, and pretty much requires you to help out by opening it up for potential access by hackers.

Please Help!!! My friend Account has been hacked.

Please Help!!! My friend Account has been hacked, and mail too, so we can't change passowrd. we don't know what to do. For now we want Skype team to block that accaount. How it is possible?

AmonRa-88 wrote:
Please Help!!! My friend Account has been hacked, and mail too, so we can't change passowrd. we don't know what to do. For now we want Skype team to block that accaount. How it is possible?
ask them to open the link below to report their hacked/stolen account. Select Security and Privacy as Help Topic and Identity Theft/Account Takeover as the Related Problem. Then Click the Continue Support Request button near at the bottom of the page.
https://support.skype.com/en/support_request?needsLogin=false&topic=****************241&problem=****...
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

How to access the activities created by an enduser especially when the enduser has left the organization?Please help me out with the possible solution

How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution

Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query

HT1918 my account has been hacked and there are itunes purchases posted to my cc. how do I shut down? help please!

my account has been hacked and there are itunes purchases posted to my cc. how do I shut down? help please!

Have you contacted your card issuer to cancel that card and changed your iTunes account password ? You can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My apple account is disabled, please help me deal with as soon as possible!

My apple account is disabled, please help me deal with as soon as possible!

Change the password, but did not receive the letter to change the password

My premium account has been hacked, please help ASAP!

Apparently my Spotify account has been hacked last night and the password & email address have been changed so I can't reset my password. My hacked account is "mrouhiai" I created this new account "mrouhiai_2" to post this message to this forum. I have never shared my account with anyone, and my email has not been compromised. I can prove my identity in many ways if necessary. This new account I've just created is using my old email from the original account. You should be able to verify these details easily. Case #: 03363771

Same here, today somebody changed my account norre01 e.mail address. Now it is [email protected] and I can't reset my password anymore (I tried, didn't got any e-mail). I still can access my account through Facebook login I changed my FB password, their security check didn't find any abnormal activity on my FB account.I sent also message to Customer Support, but probably it takes time. Kind regards PS! Off-topic question; is it possible to recover people/artist whom i following list?

[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.

Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)

Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck!

Please help me out with some fundamentals in BW

Hello,
Please guide me regarding the below mentioned questions.
1. what is the key date in query designer.
2. when do we perform attribute change run
like once the master data is loaded then we perform attribute change run and load the transactional data ?
3.what is the disadvantage of using aggregates.
4. what is full repair options?
please help me out with these questions

HI,
Repair full request :
If you indicate a request in full update mode as a repair request, then it is able to be updated in all data targets. This is also true if they already contain data from initial runs or deltas for this DataSource / source system combination, and they have overlapping selections.
Consequently, a repair request can be updated at any time without checking each ODS object. The system supports loading in an ODS object by using the repair request without having to check the data for overlapping or request sequencing. This is because you can also delete selectively without checking an ODS object.
Posting such requests can lead to duplicate data records in the data target.
Hierarchy/attribute change run after loading master data;
When hierarchies or attributes of characteristics change, the aggregate affected by the change can be adjusted manually or calculated automatically in process chains.
Aggregates:
Aggregates are materialized, pre-aggregated views on InfoCube fact table data. They are independent structures where summary data is stored within separate transparent InfoCubes. The purpose of aggregates is purely to accelerate the response time of queries by reducing the amount of data that must be read in the database for a given query navigation step. In the best case, the records presented in the report will exactly match the records that were read from the database.
Aggregates can only be defined on basic InfoCubes for dimension characteristics, navigational attributes (time-dependent and time-independent) and on hierarchy levels (for time-dependent and time-independent hierarchy structures). Aggregates may not be created on ODS objects, MultiProviders or Remote Cubes.
Queries may be automatically split up into several subqueries, e.g for individual restricted key figures (restricted key figures sales 2001 and sales 2002). Each subquery can use one aggregate; hence, one query can involve several aggregates.
If an aggregate has less than 15 components, BW 3.x puts each component automatically into a separate dimension that will be marked as line item (except package and unit dimension); these aggregates are called flat aggregates. Hence, dimension tables are omitted and SID tables referenced directly. Flat aggregates can be rolled up on the DB server (i.e., without loading data into the application server). This accelerates the roll up (hence the upload) process.
Disadvantage : The more aggregates exist, the more time-consuming is the roll-up process and thus the data loading process; the change run is also affected.
Hope this info Helps.
Thanks,Ramoji.

My Itunes store account has been hacked twice in two days. I have changed my password. Its hard to get ahold of support. Has anyone else delt with this problem.

My Itunes account has been hacked twice. Yesterday I thought I had it taken care of. My account was refunded and I changed my password. I woke up this morning and it has been hacked again. I can not get ahold of support at this time. has anyone else dealt succesfully with this type of problem.

Just open the link below to report your hacked/stolen account. Select Security and Privacy as Help Topic and Identity Theft/Account Takeover as the Related Problem. Then Click the Continue Support Request button near at the bottom of the page.
https://support.skype.com/en/support_request?needsLogin=false&topic=****************241&problem=****...
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

PLEASE HELP! How can I tell if my Imac has been hacked?

PLEASE HELP! How can I tell if my Imac has been hacked? I see a few people have asked this question but the responses tended to be advice on what to do once you've been hacked, not what can done to find out if you have been hacked. I have a late 2012 model imac. My sharing was off and remote logging was off. I use an external router that send wireless to about 4 consoles in the flat. I don't think I have any firewalls up (now looking like a mistake). I think I'm possibly being hacked due to abnormal behaviour and most recently my camera was turned off all day (no LED) then I went to record something on Photo Booth, the application popped up displaying an image of me getting dressed (nightmare!) which happened hours earlier when the camera was off. This image quickly then disappeared and the camera began working normally. Very strange and alarming. Please help me. Any advice would be very much appreciated. Thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My friend itune account has been hack by someone . so he don't have password or security questions answers.So he want to delete his itune account because he can't signout his icloud account on his iphone.somebody help us!!

My friend itune account has been hacked by someone.And he change every things like password,security questions and recovery mail.So my friend don't have password or security questions answers.And he want to delete his itune account because he can't signout his icloud account on his iphone.Please tell me how to turn off find my iphone without password.
somebody help us!!
sorry for my some mistake in descussion because i am bad in english.

Welcome to the Apple community moonlight94.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare (or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Please help. My account with CC info has been hack...

Similar Messages

Maybe you are looking for