Please help...When I use the Iris enhance, i'm no longer able to use the sharpness,saturation,clarity,tone +tint feature. It seems to be fixed.
Never mind,found it! Duh! Lol
When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders.
Similar Messages
-
How do I correct this, or am I due for an upgrade?
When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders. -
After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?
I am having the same problem. I have a 2nd generation ipad wi-fi only. All was working great until I upgraded. NONE of my downloaded magazines or rss-feeds are accessible. For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded. it jumps back to the shelf page.
-
since the last update to 14.0.1 and updating plugins for adobe shockwave flash my internet connection dropped out. I have two other laptops, an Ipod touch and samsung phone on the same router and all work fine. I have connection to the router but diagnosis shows no internet access. I updated the same plugin on my Vista laptop and found the same problem occurred. I have reset all network settings and the router back to factory and setup again but still the same
Hi mysticpjd,
this really does not seem to be an Internet browser issue. Have you tried a different browser (Internet Explorer)? I assume that the problem persists there right?
Regards,
jm -
what if ive forgotten my security questions, but the email to see the answers is no longer available
contact AppleCare
-
I just bought iWorks Serial Number Key over the internet. When I use the key, iWorks keep telling me the key is invalid!! Please help. (I bought this iWorks from someone in Singapore. I am using it in Malaysia.). Thanks
Downloaded the Trial version. It still says the serial number key is invalid. On the iWork page where I am suppose to enter the serial number key, the "Go Back" button is always BOLD, but the "Continue" button remains GREY all the time. The "Continue" button remains grey even after I have completed the key entry. I have to type the "Return" key on my keyboard to force enter the key. The message I get is still "Invalid key".
I have called Apple. The first person helped by asking me to delete certain items in some Folders and it still did not work. I was then connected to a senior person, but I heard over the recording that there were 15 persons waiting on the line. I had to end the call because the wait will take too long. -
I have Cox Internet service, which allows me to control what content other users on my computer see and do. My son has parental controls which do not allow him to view certain websites, download programming, ext... With this last update to Firefox, I am still able to get on the internet, but when he tries to click on the Firefox icon on his desktop it tells him there has been an error and shuts down. He is forced to use Internet Explore. I do not want him using this web browser. Please help us get him back on Firefox.
Thank you Michelle BrooksAdd-ons are the responsibility of their authors. McAfee does not even put their extension on http://addons.mozilla.org you had to install it from their site.
Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
* "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
* Do a Google Search no problem
* It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down. -
PLEASE HELP when I upgraded to the new firefox my old one got deleted which had all my stuff and my mac is only 10.4.11 and wont work please help!!!
Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend. -
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
please help!!!!!! i filled out a job application using adobe reader but i cannot send the file back via email because the file is protected with a lock. how do i unlock this file to send it?!!!!!!!!!
Hi kevinv1987,
It doesn't sound like the PDF was password protected (or Adobe Reader would prompt you for a password). Instead, it sounds like that file may be marked locked by your operating system. Are you on Mac OS or Windows? In either case, here are instructions for removing the lock icon from the file:
Remove the Lock Icon from a Folder in Windows 7 (check Microsoft's website if you have a different version of Windows)
On Mac OS, select the file in the Finder, and choose File > Get Info. Then, just deselect the Lock checkbox.
Please let us know how it goes.
Best,
Sara -
Please help when initiating resore recovery keyboard no response nor mouse
please help when recovery process applicated keyboard no response cant press enter nor any mouse response please help how can i recover my pavillion from hp
Hi Brunodaniel2345,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and recovery selection does not use the mouse or keyboard. Have you tried Tab it will take the selection to the next line?
What about putting the laptop in Safe Mode for a system restore? Here is a link to show you how.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Hi I hv bought my iPhone 5s from Dubai and using it in India. I m not able to use FaceTime. Please help to enable FaceTime in my iPhone 5s.
What is the model number of your iPhone? Settings=>General=>About, scroll
down to Model.
FaceTime is restricted in certain Middle East countries and iPhones designated
for those markets will never have FaceTime, even when no longer in the restricted
areas. -
Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2
Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2, running Mountain Lion. I use trim then export but it doesn't give the movie option as a format. What would you suggest i do?
I'm not sure why you're using a FAT32 drive, but using ExFAT instead of FAT32 would be a better overall choice as it doesn't have the 4 Gig limit.
http://www.tech-recipes.com/rx/2801/exfat_versus_fat32_versus_ntfs/ -
Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo). -
Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
MaraHello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you
Maybe you are looking for
-
How to put restriction/variable in BI 7.0 ? Is there any settings required?
Hello, I am working on BI 7. I want to know ""How to put restriction/variable in BI 7.0 ? Is there any settings required? I am putting some variables in BI 7.0 while making some query"" amit shetye.
-
Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty.Anyone know what can be done?
-
Posterization in Lightroom 4.4 and Photoshop CS6
I'm struggling with posterization in Lightroom 4.4 and Photoshop CS6. I'm shooting RAW on a Nikon D800. Unedited bright sunset photos show nasty posterization. Screenshot is included, unedited. Any suggestions on what to do about this?
-
I have deleted my notes page on my iPhone5, can it be restored please
I have deleted my notes page on my iPhone5, can it be restored please.
-
Extended Table Maintenance Events 05: Original line when copy entry?
Hello, in the Extended Table Maintenance <b>Events 05</b> I want to <b>copy</b> my own tables. For that I need to know not only the newly created line, but also the original line which was the template for the copy. I know this line is contained in t