PLEASE Help with HTML code for email background image...

Hi there!
i have a background image that I want to pop into an html email widget for the email's background... here is the web link I created in Photoshop: file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/tileabl e-metal-textures-2.html
If anyone could please help me out that would be AWESOME! I've attached pics of the background & I'm using Infusionsoft email builder which allows for HTML widgets. I have a code that I use for my landing pages & webforms which works, tried that but no dice!
Any help would be much appreciated - I'm an html newbie!
Here is the code that I use for landing pages & works great, tried it for the email & it was a fail:
<style>
#mainContent .background, {
      background: url('file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html') no-repeat center center fixed;
    background-size: cover;
</style>
<script src="file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html">
</script>
<script>
jQuery(document).ready(
      function(){
      jQuery(' table.bodyContainer').removeAttr('bgcolor');
</script>
thanks in advance!
Muse

Not sure what you expect. Your URL is absolute and pointing to a local file resource. It's not a proper relative HTML link. Beyond that it's toatlly unclear how you actually plan to load your image and where they are hosted, so nobody can tell you anything. Either way, there is an obviously painful lack of understanding of even the most basic web techniques, so the best advise anyone would give you is to spend some time with a web search and actualyl learn some of that stuff...
Mylenium

Similar Messages

Help with html code for displaying flash animation

hi all,
i'm new to the forums :)
not sure if this is the correct section or not.
i run a small web based community for xboxlive players and i
am trying to add an interactive flash file into a block on the main
portal page
What
the file should do- link to sample file
link to swf
file- link to actual flash file
homepage - link to portal
homepage where the flash file needs to be, if you scroll all the
way down the bottom of the page you will se it sort of works but im
stumped as to how to get the full animation to show properly ?
any help would be most appreciated.
cheers

hard to say just what the issue is here, since the file
operates normally in other embeds - I guessing that it has
something to do with your BB settings somewhere.

Need help with html code for password logins

I'm building a site and need to have a login page where multiple users can have unique usernames and passwords and then all be redirected to the same page within the same website. Does anyone have any code advice or tips on how this can be done in iweb. I getting stuck at the point in the code where I have to enter the site to be redirected to upon entering the correct username and password. I would greatly appreciate any advice or tips. Thanks

Its done on the server rather than in iWeb....
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html

Help Needed with HTML code for Image Positioning

Hi All,
Need a little help with some code for positioning images.
I initially used the following:
This is fine, but the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I also used the following code with success:
<style type="text/css"
img
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
This code works, however the problem with it is it is not individual to just one photo - it moved all my photos and on that page, I wanted one photo floated to left and another to the right.
If I use this code, how can I make it photo specific, so that it only affects the placement, margins and borders of one photo?
Any help would be great.
Thanks

CSS question, not iWeb question. Regardless, use inline CSS styling for the image. You can also wrap the image in its own tag and declare an id or simply declare an id for the img tag, then set the style for the id_name:
<style type="text/css"
img#id_name
float:right;
border:2px solid white;
margin: 0px 0px 15px 20px
</style>
If you want to control the style of more than one image on a page but not all then use a class instead of an id.
the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
I believe you have discovered a solution for this according to your CSS code. You have set the border to white by looking at the code and adjusting it appropriately. Your margin is declared in the CSS also, adjust the pixels appropriately.
Read up some more on CSS to educate yourself further. I suggest w3schools.com or a CSS forum instead of the iWeb forum if you have CSS questions. It's kind of like if you drive your auto to the supermarket so you decide to go to the supermarket and ask everyone in the produce section to help when you have car problems. All the supermarket does is provide a place to park your auto. If you have car problems then ask a mechanic. iWeb (and most of its users) doesn't specialize in code, it simply provides an area for you to place it. Granted you might get lucky and find a mechanic in the produce section of the supermarket, but you're more likely to find a specialist at an auto swap meet (or CSS coding forum)!

Help with writing code for button

Hi!
Can someone help me with the code for a button that sends my menu back to 0?
This is the code current code, and I've created a button called sistapilen that I want to insert where the regular button "arrow" is not visible. I want sistapilen to navigate me back to 0. (Or if I can get "arrow" to do it and delete "sistapilen").
/Jen
// File downloaded from www.riacodes.com
import com.greensock.*;
var arrayX :Array = [0,-800,-1600,-2400,-3200,-4000,-4800];
var currentIndex:Number=6;
left_mc.addEventListener(MouseEvent.CLICK,navigate);
right_mc.addEventListener(MouseEvent.CLICK,navigate);
left_mc.buttonMode = true;
right_mc.buttonMode = true;
checkArrows();
function navigate(e:MouseEvent):void{
if(e.currentTarget == left_mc) currentIndex --;
else currentIndex ++;
checkArrows();
TweenLite.to(content_mc,.5 ,{x:arrayX[currentIndex]});
function checkArrows():void{
if(currentIndex == 0) left_mc.visible=false;
else if (currentIndex == arrayX.length - 1) right_mc.visible = false;
else{
left_mc.visible = true;
right_mc.visible= true;

Add a listemer for whichever other button you plan to use...
sistapilen.addEventListener(MouseEvent.CLICK,navigate);
And try changing your navigate function as follows...
function navigate(e:MouseEvent):void{
     if(e.currentTarget == left_mc) {
          currentIndex--;
     } else if(e.currentTarget == right_mc){
          currentIndex ++;
     } else {
          currentIndex = 0;
     checkArrows();
     TweenLite.to(content_mc,.5 ,{x:arrayX[currentIndex]});

Please help with Posting Keys For Fast Entry (t.code OBXJ)

Dear experts,
Please help me to be more familiar with configurtation of Enjoy Transactions (t.code OBXJ). I want to configure fast entry transaction and change standard assignement of posting key. But there are no editing options in this transaction, just three transaction keys are predefined and posting keys are assigned to them (those are changable). But where to see what those transaction keys mean? And what could be your proposals, how to configure this IMG step?
Thanks!

Hi,
t.code OBXJ is for automatccly postings, normal you never change the standard posting keys.
In the block line items you can select colums you need and place the one's you need to the begin of the screen and in the right top corner of posting line items you can click an save this as (default) variant.
When you want to use an other posting keys you use the option complex posting (F6)
Paul

Help with html code. not running properly once on server

The video works fine in captivate and works once i publish it, but when I try to upload it onto the server it does not. This is my first time using captivate 4, and when I matched the codes from my old movies they were quite different. So I just messed with the code I had and made it lok like the old vodes and it runs fine on the server.
I was wondering if anyone had any ideas on what is going on with the code that it does not work on the server?
Thank you!!!!!
-danielle

Hello Sue. It's very easy actually.
If you have the lastest update of Muse CC from Nov 2013, there is a FREE Muse Library by musegrid.com that you can download from the Adobe Muse Exchange page that does this specifically using Google Analytics. Here is the direct link should you like to check it out:
http://muse.adobe.com/exchange-library/add-google-analytics
Start by "Right Clicking" on the "Master Page Icon" in the "Plan View" and choose "Page Properties" from the list of menu options available.
This will open up the "Page Properties Dialog Box" for the entire site. Once that dialog box is open, paste your code into the "Metadata" tab section (I believe that tab is displayed at default - at least on the Mac it is - I'm pretty sure it's the same on the Windows platform).
All anaytics embed code goes in the <head> tag of an html page (note: it actually says "HTML for <head>" at the top of the embed window area - making it helpful to know you're in the right area). This is also where you would add any <meta> tags too like facebook's OpenGraph code etc.
If using more than one master, included it to all masters. If just using it on a specific page - say like a landing page, just go to that particular page in your site's "Plan View" and paste it there instead.
Incase i get too "wordy" i've attached screen shots of what these should look like.
Good luck Sue!
And congratulations on a nice new computer too - its got "juice".

Need help with LabVIEW code for motor control.

Hi,
My name is Sasi. I am a BME grad student working on my thesis topic of evaluating spine implants for low back pain. For this I am building a test machine that would apply pure moments to a spine specimen. I am using LabVIEW 8.5 to implement control of a brushless AC servo motor. My requirement is,
Step 1: Initialize the motor.
Step 2: Start moving it at a uniform RPM to the right (This RPM value too user can enter).
Step
3: While doin Step 2; simultaneously read torque cell data (Using DAQ
asst.). DAQ o/p is from 0 V to 10 V; 0 V being -10 Nm n
10 V being +10 Nm
Step 4: When Torque value reaches +10 Nm, i.e 10 V, the motor stops.
Step
5: From the position where motor stopped (i.e no need to reset to
initial position) Start moving in the opposite direction at the same
uniform RPM as in Step 2 while reading torque cell data.
Step 6: Once again when torque reaches -10 Nm, i.e. 0 V, the motor should stop.
Step 7: Repeat 'Step 2' to 'Step 6' 3 times.
Step 8: Reset motor postion.
Till now I have managed to get the motor to move forward n backward @ a desired vel, accl, n deceleration for 3 cycles. I am attaching my code. I am having problem inserting the code for reading DAQmx amidst all this. Can anyone help me out.
Thnks,
Sasi.
Solved!
Go to Solution.
Attachments:
Test_012609.vi ‏35 KB

Hi Sasidhar,
I took a look at your problem and I think I have a workable solution for you. I definitely agree with Lynn's suggestion of using parallel loops. This will allow the DAQmx portion to run uninhibited by the motion portion, and vice versa. Plus, you only need to iterate the motion loop whenever the voltage level crosses a threshold. So, by iterating on the motion code in the same loop that you are iterating on DAQmx code, you are essentially wasting processor.
I created a VI that should do what you are wanting. I tested it out myself and it works great. You might have a tweak a few things to apply to your system (like motion board ID and DAQmx physical channel, etc.). I used two parallel loops and event-based programming. Basically the motion loop starts the motor spinning at the specified velocity. Once the motor is spinning, it waits for the DAQmx loop to tell it that the voltage value has crossed the threshold. When the voltage value exceeds the maximum threshold (which I set to a value slightly less than 10 to allow for jitter and saturation), the DAQmx loop signals the motion loop that it can finish its iteration. The motion loop stops the motion, reverses the direction, and starts the motion again. Once motion has started, it again waits for the DAQmx loop to tell it that a threshold has occurred, but this time, it is looking for a minimum threshold. I used "Occurrences" to implement the event-based programming in LabVIEW.
I have commented the code rather thouroughly, so hopefully the comments will answer any remaining questions. The benefit of using event-based programming for this is that you save processor time, and your motion is more closely synchonized with the DAQmx. Instead of iterating the motion loop as fast as you can, checking for updates each time, you just pause it, and wait for the other loop to tell you when to start up again. In the mean time, the processor doesn't have to worry about iterating that loop over and over again. Also, when the occurrence does occur, you catch it immediately, instead of having to wait until the next iteration. Thus, you are more closely synchronized with the DAQmx portion of the code.
I hope this will help you. Please post back if you have any questions about the code or its implementation. Good Luck!
Message Edited by Wes P on 02-03-2009 05:18 PM
Wes P
Certified LabVIEW Developer
Attachments:
Motion and DAQ.vi ‏59 KB
DAQmx Loop.png ‏24 KB
Motion Loop.png ‏17 KB

Please help with this bapi for creating billing document

I want to create a billing document using the bapi: BAPI_BILLINGDOC_CREATEMULTIPLE from a delivery number and NOT A SALES ORDER.
Please tell me what details to be passed to table BILLINGDATAIN . Please don't provide me function module documentation because it does n't help me create billing document from delivery. A sample source code or suggestion to what to pass would be really great!
Thanks,
Krishen
P.S. Points assured for helpful answers and thanks for your time.

Hi,
Try this..
DATA: s_vbap TYPE vbap.
TABLES: vbak,vbap,likp, lips.
DATA: t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE.
DATA: t_conditions TYPE STANDARD TABLE OF bapikomv WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE.
DATA: t_ccard TYPE STANDARD TABLE OF bapiccard_vf WITH HEADER LINE.
DATA: t_errors TYPE STANDARD TABLE OF bapivbrkerrors WITH HEADER LINE.
DATA: t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE
PARAMETERS: p_vbeln TYPE vbeln.
select single * from likp
                where vbeln = p_vbeln.
SELECT SINGLE * from lips where
                vbeln = likp-vbeln.
t_billing-salesorg   = likp-vkorg.
t_billing-ref_doc     = likp-vbeln.
t_billing-ref_item    = lips-posnr.
t_billing-doc_number     = p_vbeln.
t_billing-itm_number    = lips-posnr.
t_billing-ordbilltyp = 'ZINV'.
t_billing-price_date = sy-datum.
t_billing-ref_doc_ca = likp-vbtyp.
t_billing-material    = lips-matnr.
t_billing-plant       = lips-werks.
APPEND t_billing.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
TABLES
    billingdatain         = t_billing
    return                = t_return
    success               = t_success
commit work.
Thanks,
Naren

Please help with RMAN dup for RAC db

Happy Holidays!! All,
I need help with the following issue:
Both target and auxiliary databases are:
Database version is 10.2.0.3 with 2-node RAC db
Servers are MS 2003
Oracle Clusterware 10.2.0.3
Oracle ASM for storage
I have run the rman dup from RAC to a single instance db for a while. This is the first time I ran from RAC to RAC. This auxiliary db was refreshed before and was up for a while and was managed by server control tool. Now I am trying to refresh it with new backup files from production. I did the following as people suggested:
1)     shutdown instance in the second node.
2)     Startup nomount mode in the first node
3)     Run RMAN dup
It failed in the same place with slightly different errors. I pasted error messages at the bottom. I already created a TAR with Oracle but would like to know if anybody has any info related to this. Also I have several questions to ask:
1)     Should I stop all services related to Oracle in node-2
2)     Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
3)     Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
4)     How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Thanks a lot for your help and have a great holiday season!!!
First time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ====================================================
RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS ==============
RMAN-00571: =============================================
RMAN-03002: failure of Duplicate Db command at 12/21/2009 20:24:47
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-00610: Internal error code
Second time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ==========
RMAN-00571: ===================================================
RMAN-03002: failure of Duplicate Db command at 12/22/2009 15:53:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-03113: end-of-file on communication channel
Shirley

1) Should I stop all services related to Oracle in node-2
No, you just need to stop the second instance.
2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
No, you don't need to stop anything. Just have the instance startup nomount.
3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
You have not shown enough information. Did the restore succeed ? Did the recover succeed ? What was it doing when it failed ?
4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Yes, srvctl remove database is all you need. (unless you also want to remove from listener.ora, tnsnames.ora, oratab etc)

Help with html code - inserting video into Muse

I am seeking help writing the code to insert a video into Muse. I uploaded video into my Business Catalyst hosting. I need it to autoplay, loop and not show any controls or frames.
When I host video on Vimeo or YouTube, I see markings on the video that is why I am trying to just host in the same place that the files are stored for my website. If there is a way to host on youtube with out any markings showing up on the video I would be open to that too.
I don't want to see any play button or time bar.
Thanks in advance!!

Hello,
Just as an FYI - we also have an HTML5 video tool over at MuseThemes.com that achieves this, but works on mobile devices as well. The link above looks like it uses Flash, which isn't common anymore since the release of HTML5 based video.
Simply drag the widget out onto your canvas, and link up your videos / set options like loop, controls visible, etc. It's quite a flexible widget, and there's a complete training video included so you don't get stuck
Check out the widget here
Just wanted to provide another alternative that could be helpful. Cheers!
Steve Harris
MuseThemes.com

NEED HELP WITH REDEEMING CODE FOR OS LION!

im running 10.6.8 and im trying to update to Lion , im qualifyed to update free apple has sent me a code to redeem on the mac app store but i says " the code you have entered is not recognised as a valid code."
PLEASE HELP!

IVE DONE IT, IF YOUR USING HOTMAIL EMAIL - CLICK DOWNLOAD ON THE ABOVE YOU MESSAGE AND A LINK SHOULD APPEAR, YOU SHOULD HAVE GOT ANOTHER EMAIL SAYING YOUR CODE - COPY AND PASTE THE CODE YOU GOT INTO THE LINK AND CLICK NEXT OR SOMETHING, THEN YOU SHOULD GET ANOTHER CODE AND GO TO MAC APP STORE ON YOUR LEFT YOU SHOULD HAVE "QUICK LINKS" AND UNDER THAT YOU SHOULD HAVE REDEEM CLICK THAT AND TYPE IN THE CODE YOU GOT FROM THE LINK THEN YOUR DONE!
Ps. if you did not get the email check your junk/spam folders.

Need help with Labview code for DAQmx

I'm currently trying to write Labview code for some thesis research and am having problems. I'm using the cDAQ 9172 with strain gage modules and two voltage input modules. I'll be reading/recording a voltage from an external source on one channel, while recording strains and accelerations with the other channels. I need to do all this simultaneously.
Everything I've done to this point has been in SignalExpress so I'm not sure how to program any of this. I also need to be able to calibrate the strain gages prior to each set of recordings. Any help you guys could offer would be greatly appreciated. Thanks.

Hi,
I'm not sure how much this will help you, but I've attached a screen dump of code from a project I did that sounds pretty similar to what you're working on. The code is from a subVI that I used to create the daqMX measurement task for my data acquisition. I was also using a 9172. This was written in 8.5, but the only thing that you may not have access to is the functions for null offset and shunt cal of the strain gage channels. Hopefully this will at least get you started on your way to setting this up.
Andrew Carollo
Attachments:
create task.jpg ‏208 KB

New to Programming, need your help with writing code for java in Xcode.

Hey everyone! Sorry if I sound like a total idiot here with a bunch of developers but I could really use your help. I am in college and having a bit of problems with my intro to programming class. The class is entirely Java based and so, after having to use dos windows on my grandpas crappy laptop I found out about xcode. I downloaded and installed it but I am having problems seeing where exactly it is that I am to write my code for a normal java application. Any help would be greatly appreciated! I wrote it on the bottom of a bunch of code that looked strange to me. For relatively simple java programs I chose the java application template. Is there something here that I missed?

The Java Application project template looks like it sets up an application and some kind of starting UI using Swing/AWT. I didn't look at it too indepth, but if you are in an introductory course this might be more than you need to complete your assignments. There doesn't seem to be blank Java template, so I don't know what you should use. Perhaps just a blank project you add your .java files to.
To answer where to write code, you would write it in your .java files under the /src folder. Execution begins in
public static void main(String args[]) {}
in YourAppName.java, then creates an object based on your application class, and runs the code from there to display the UI.

Please help with this code....

I create a button with ActionListner and a writeCd method. Now I want everytime i push the button, it will read the writeCd method. I dont' know how to make it work. Please help me out as soon as possible. Thanks a lot. Below are the codes of the button and writeCd method.
class findCD implements ActionListener
public void actionPerformed(ActionEvent event)
//what do I need to put here to make the button work
//with method writeCD() below
public void writeCd() throws Exception
String outputFileName;
PrintWriter outputFile;
outputFileName = "D:\\cdoutput.txt";
outputFile = new PrintWriter(new FileWriter(outputFileName,true));
int loopTest;
do
String numStr = JOptionPane.showInputDialog("Please enter Index number");
int number = Integer.parseInt(numStr);
cC.setIndexNumber(number);
numStr = JOptionPane.showInputDialog("Please enter cd name");
number = Integer.parseInt(numStr);
cC.setCdName(number);
String message = cC.toString() +
"\nYour input is: ";
JOptionPane.showMessageDialog(null, message);
outputFile.println(numStr + "");
loopTest = JOptionPane.showConfirmDialog(null,"Do another?","",0,1);
while (loopTest == 0);
outputFile.close();

class findCD implements ActionListener
       public void actionPerformed(ActionEvent event)
            try
                 writeCd();
            } catch(Exception e){
                                    e.printStackTrace();
public void writeCd() throws Exception
      String outputFileName;
      PrintWriter outputFile;
      outputFileName = "D:\\cdoutput.txt";
outputFile = new PrintWriter(new
(new FileWriter(outputFileName,true));
         int loopTest;
         do
String numStr =
umStr = JOptionPane.showInputDialog("Please enter
Index number");
         int number = Integer.parseInt(numStr);
         cC.setIndexNumber(number);
numStr = JOptionPane.showInputDialog("Please
"Please enter cd name");
         number = Integer.parseInt(numStr);
         cC.setCdName(number);
         String message = cC.toString() +
                          "\nYour input is: ";
         JOptionPane.showMessageDialog(null, message);
        outputFile.println(numStr + "");
loopTest =
pTest = JOptionPane.showConfirmDialog(null,"Do
another?","",0,1);
         while (loopTest == 0);
       outputFile.close();
    }That should work. This also assumes that the method writeCd is in the class findCD.

PLEASE Help with HTML code for email background image...

Similar Messages

Maybe you are looking for