Please need help with RAID Manager (+)

Good day
Could someone give me advice is it possible to organize RAID-5 under Solaris 5.7?
I use SUN SPARC Enterprise 250 with four USCSI HDDs (Seagate 18Gb/10k).
One of the hardware requirments for RAID Manager is:
RAID modules with two A3x00 controllers.
I suppose if I use SCSI - A3x00 controllers are already there? Or I missed something and this should be shipped separately? Is there any way to check are there any A3x00 controllers in my system?
Thanks a lot and happy holidays!
Regards,
Roman

Hi Roman,
The Raid Manager software is specifically for managing some of Sun's external storage arrays, namely the A1000, A3000 & A3500. Raid Manager will be of no use for the internal disks in the Ultra Enterprise 250. What you should be looking at is DiskSuite which is software based RAID that is supplied with Solaris 8. You will find great documentation for Disksuite installation and usage on http://docs.sun.com
Regards,
Ben Humphreys
Sun Australia - Solution Centre

Similar Messages

  • Please, need help with a query

    Hi !
    Please need help with this query:
    Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
    Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
    select distinct a.id,
    create_date,
    a.loanid,
    a.rate,
    a.pays,
    a.gracetime,
    a.emailtosend,
    d.first_name,
    d.last_name,
    a.user_id
    from CLAL_LOANCALC_DET a,
    loan_Calculator b,
    bv_user_profile c,
    bv_mr_user_profile d
    where b.loanid = a.loanid
    and c.NET_USER_NO = a.resp_id
    and d.user_id = c.user_id
    and a.is_partner is null
    and a.create_date between
    TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
    TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
    order by a.create_date

    Take a look on the syntax :
    max(...) keep (dense_rank last order by ...)
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions056.htm#i1000901
    Nicolas.

  • Please need help with this query

    Hi !
    Please need help with this query:
    Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
    Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
    select distinct a.id,
    create_date,
    a.loanid,
    a.rate,
    a.pays,
    a.gracetime,
    a.emailtosend,
    d.first_name,
    d.last_name,
    a.user_id
    from CLAL_LOANCALC_DET a,
    loan_Calculator b,
    bv_user_profile c,
    bv_mr_user_profile d
    where b.loanid = a.loanid
    and c.NET_USER_NO = a.resp_id
    and d.user_id = c.user_id
    and a.is_partner is null
    and a.create_date between
    TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
    TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
    order by a.create_date

    Perhaps something like this...
    select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
    from (
          select distinct a.id,
                          create_date,
                          a.loanid,
                          a.rate,
                          a.pays,
                          a.gracetime,
                          a.emailtosend,
                          d.first_name,
                          d.last_name,
                          a.user_id,
                          max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
          from CLAL_LOANCALC_DET a,
               loan_Calculator b,
               bv_user_profile c,
               bv_mr_user_profile d
          where b.loanid = a.loanid
          and   c.NET_USER_NO = a.resp_id
          and   d.user_id = c.user_id
          and   a.is_partner is null
          and   a.create_date between
                TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
                TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
    where create_date = max_create_date
    order by create_date

  • Need help with color management

    I am looking for someone to help me.  Please!
    I am looking for help with Photoshop/printer not printing correct colors.
    I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
    Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect.  I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
    I will be working a lot with cardstock or cover stock 65-110 lbs paper.  I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one.  I have tried matching the settings of that printer to mine to no avail.  I have finally gotten the color close, but not quite.  When I print on my Canon injet the colors match and print perfectly.
    I have tried every setting variation that I can think of to get the color correct with my new OKIdata.  I have to get the colors correct or my new business will go under because I can't match colors for my customers.  I am a self taught Photoshoper and a novice so please bear with me.
    Using Okidata PCL.  Also have PS
    Color settings in Photoshop:
    North America General Purpose 2
    sRGB 2.1
    U.S. Web Coated Swop v2
    Dot gain 20 %
    Dot gain 20 %
    Preserve embeded profile
    Preserve embeded profile
    Preserve embeded profile
    engine: Adobe (ACE)
    Relative Colormetric
    Tried RGB color mode and CMYK color mode, no difference
    Printer settings:
    Photoshop manages colors
    sRGB 2.1 Printer profile
    Relative Colormetric
    Print setup:
    Letter
    Multipurpose tray
    Weight: printer settings-default  (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
    Job Options:
    Hight Quality
    Color: No color matching
    Printer preferences in Printer properties:
    Color management
    Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
    ICC Profiles: Generic PnP Monitor (default)
    Advanced:
    Windows Color System Defaults:
    everything under this tab is set at System Default
    I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help.  I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
    Tried printing in PSE and it gave me an error that it was not a post script printer.  Installed ps driver, still getting errors and it wouldn't print.
    I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k  LOL
    Thanks!  JS

    You need an ICC profile for your printer.  Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you.  You download some software they provide, then print a test file on the exact same paper you are using for your cards.  Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file.  Once you have it, you'll be able to print accurate colors.
    There are other services out there that may cost less, but I do not know how reputable they are.  Chromix is a good business I've worked with many times.
    If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble.  Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

  • [Solved]Need help with backup-manager

    So I'm trying to set up backup-manager to make.. well, backups. Their wiki has been shut down thanks to spammers, and ours has no specific entry for backup-manager, so I will have to do it with its man page and the (well documented) config file. However, I still have some questions. Sorry in advance for the amount of questions and the length of the topic. I just wanted to get this clear in one go.
    First: I want to make a *full* system backup, so that I can restore my system in case of breakage without reinstalling. When I looked at creating backups in the past, I noticed some folders don't necessarily had to be backupped. What folders in / could I skip?
    Second: I chose the tarball backup format. Would it then be safe to comment out all the other variables (for tarbal-incremental/mySQL) backups?
    Third: Now there were some parts of the config file that I didn't understand. I hope you can explain some of those parts to me.
    # Number of days we have to keep an archive (Time To Live)
    export BM_ARCHIVE_TTL="5"
    That means the archive it creates will be removed after 5 days - but what if I copy it to my external hard disk? I don't think it will delete it then, so would it be safe to comment this out - or what will it do if I just keep it this way?
    # At which frequency will you build your archives?
    # You can choose either "daily" or "hourly".
    # This should match your CRON configuration.
    export BM_ARCHIVE_FREQUENCY="daily"
    I either want to make a backup when I want to, or weekly - not hourly or daily. Is this possible with backup-manager?
    # Do you want to purge only the top-level directory or all
    # directories under BM_REPOSITORY_ROOT?
    export BM_REPOSITORY_RECURSIVEPURGE="false"
    I don't understand that option. Could you explain me what it will do? Info: BM_REPOSITORY_ROOT is set to my home folder. It's the place where the archives are stored.
    # Do you want to replace duplicates by symlinks?
    # (archive-DAY is a duplicate of archive-(DAY - 1) if they
    # are both the same according to MD5 hashes).
    export BM_ARCHIVE_PURGEDUPS="true"
    Will this harm anything in my system?
    # Do you want to dereference the files pointed by symlinks ?
    # enter true or false (true can lead to huge archives, be careful).
    export BM_TARBALL_DUMPSYMLINKS="false"
    This would 'destroy' all symlinks, no? I'm going to keep this at false, but I would like to know.
    Last edited by Unia (2011-08-29 18:19:37)

    Tried to do a selective upgrade & broke something this morning so I tried restoring my CompleteRaid0 backup, worked like a charm.
    This is the latest backup script I'm using:
    #!/bin/sh
    # Little script to tar up the important root folders.
    # To untar, use:
    # tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
    echo "Do you want to clear pacman's cache before tarring up the root folder? This will save time in both the tar- and untar process."
    echo -n "(y|N) > "
    read a
    if [[ "$a" = "n" ]] || [[ "$a" = "N" ]] || [[ "$a" = "" ]]; then
    echo "Pacman's cache will not be cleared."
    else
    echo "Pacman's cache will be cleared now, please wait..."
    pacman -Scc --noconfirm
    echo "Pacman's cache succesfully cleared. Continuing now..."
    sleep 2s
    fi
    DATE=`date +%m%d-%H%M%S`
    CB=CompleteRaid0-$DATE.tar.gz
    NB=FreshInstall-$DATE.tar.gz
    echo "********************************************************************************"
    echo "Proceeding with Fresh Install backup $NB."
    echo "********************************************************************************"
    sleep 5
    cd /
    tar -cvpzf $NB --one-file-system \
    /boot \
    --exclude=/$NB \
    --exclude=/dev \
    --exclude=/etc/fstab \
    --exclude=/home \
    --exclude=/lost+found \
    --exclude=/media \
    --exclude=/mnt \
    --exclude=/proc \
    --exclude=/root \
    --exclude=/sys \
    --exclude=/tmp \
    mv $NB /home/chuck/Backups/
    echo "********************************************************************************"
    echo "Sleeping for 10 seconds."
    echo "Proceeding with complete backup $CB."
    echo "********************************************************************************"
    sleep 5
    tar -cvpzf $CB --one-file-system \
    /boot \
    --exclude=/$CB \
    --exclude=/tmp \
    --exclude=/mnt \
    mv $CB /home/chuck/Backups/
    echo "********************************************************************************"
    echo "Backups Complete"
    echo "********************************************************************************"
    sleep 10
    exit 0
    Restored it with this:
    #!/bin/sh
    # To untar, use:
    # tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
    tar -xvpzf /home/chuck/Backups/now.tar.gz -C /
    mkdir /proc \
    /lost+found \
    /sys \
    /mnt \
    /media \
    /mnt/bind/Downloads \
    /mnt/bind/Pictures \
    /mnt/bind/Maintenance \
    /mnt/bind/Music \
    /mnt/bind/Backups
    exit 0
    Of course the directories already existed so that part was unnecessary & only needed if I had restored onto a fresh installation.

  • Need help with Raid 1 hard-drive replacement

    Hello All - I hope someone can help with this.
    I have a Raid 1 set-up using two 1Tb external drives (1 Seagate and 1 Lacie) which has been working perfectly - until yesterday that is. I received an error message saying the Raid 1 Set was degraded. On checking I got an error message against the Lacie HDD 'Disk failure'. Following instructions i found on Apple Support i tried to replace the failed drive with a new 1Tb drive - but then got an error message saying that the new drive was too small - on checking the original Seagate Drive reads as 999.86 Gb with the new Drive reading 999.83 Gb. I presume this is to do with formatting of the 2 drives, although one would assume (perhaps naively that as both drives are 1Tb they would be the same size when formatted!!
    In light of this I ran 'verify disk' on the Raid 1 Set and this was ok and I am now attempting to rebuild the failed Lacie drive - 10 hours still to go. However even if this works I would want to replace this disk as it is quite old now. The Raid 1 Set is backed up to Time Machine on a separate HDD.
    Can anyone suggest a way forward for me to swap out the old drive and replace it with the new drive that I have purchased - I can't see how exchanging this for another make would be any guarantee that the disk would be the same size? I understand that I can't replace the failed drive with a larger drive. The only other way I can see of proceeding is to buy a second new disk (same as I got today) and create a new Raid 1 set and copy everything across.
    Thanks in Advance

    For an external hard disk drive or other (different) system shared
    storage devices to work, they probably should be formatted in a
    format seen by both operating systems.
    If the WD unit is not seen by Windows computers on your network,
    the WD may have been formatted in HFS+ for the Macintosh. That
    is OK unless you need a Windows computer to access the same.
    The Macintosh can see and use a standard Windows disc format;
    so the external drive may need to be reformatted away from HFS+
    if that is really what is going on (and archive any data on the suspect
    drive elsewhere, since it will be lost to reformatting overwrites)
    and then both Mac OS X and Windows should see the files on there.
    And Macs set up to run Windows may also see the non-Mac format;
    without having to re-boot via BootCamp, if that option is in use.
    As to the other question(s) I really have no idea at this point in time.
    And since that may be the rub, hopefully someone will follow up here.
    Good luck & happy computing!

  • Please need Help with web application deployment in Jdeveloper 12c

    Hi,
    I am desperate for help guys. am trying to deploy a web application in weblogic server, but nothing works!!
    I created a project in jdeveloper and created a jsp page inside the project, all what i want is to run that page!
    I followed the instruction here: Deploying Fusion Web Applications , I don't really know if i did it right or wrong, the document is too detailed and not understood clearly.
    I am a newbie oracle user, and trying to build jsp web application connected to oracle database. application deployment fails it says: cannot run application error deploying IntegratedWeblogic..
    please could you tell me the steps of application deployment in Jdeveloper 12c?
    what deployment profiles I need to create (ear, war , mar)?
    what deployment descriptor I need for my app to work?
    please guys I am newbie to oracle, if you could give me simplified answers and straight instructions it will be appreciated .
    thank you

    hi Timo,
    I am building a local web application, meaning the server is internal and will not connect to the web, only to local pcs via network. the application will insert/select data from the database server. My company wants to embed oracle technology on the datatabse and that what am trying to. I am not that expert in java and oracle in general, my main knowledge are in php, html and mysql programming. through my long internet research a lot has recommended jsp with html to be a good choice.
    At beginning I played around with ADF faces, I found it annoying because I prefer coding than using drag and drop interfaces, which always create unwanted results.
    Also am not that professional java programmer, i started learning jsp and found it easier.
    What I am thinking of is to make a web based application that works in browsers (like php), this application has forms to insert data, and also has forms to output data for printing. that's all. I tried to make it in php, but through my little knowledge and internet researches it seems php does not work with oracle and java is the recommended choice (or it works with php but too complicated to make it)
    any recommendation will be much appreciated
    thank you

  • PLEASE NEED HELP WITH OUTPUTTING HDV/DV!! 16:9 to 4:3!! NEED HELP NOW!

    ok. I started out with HDV footage. Imported that edited it native HD into final cut 5, didn't downconvert. Now I am trying to output the finished work onto a dv camera through firewire. At first i nested the HDV sequence into a NTSC sequence, but the video wouldn't go through to the camera, only audio. I thought it was a connection problem, but then i played some DV footage and it went to the camera fine. So then i exported the DV sequence as a quicktime movie in NTSC form, but that really cropped the 16:9 footage and made it unwatchable. How can i take the 16:9 HDV footage, and letterbox it so that it fits inside a 4:3 frame without cutting off any of the original frame, and then export that to a DV camera? Let me know if you need more info, please help this is due tomorrow!! ahhhhh!

    When you Export using QuickTime Conversion, to DV Stream, you get an option of what the aspect ratio should be. Select 16:9 and the DV stream will be what you're looking for. Opening that in FCP and sending it to the camera should work out well.

  • Need help with color managment addon

    I am using Firefox under Fedora 14 Linux. I added the color management addon and told it which profile to use. But I am having some trouble telling if it is working. One problem is that when I use firefox to open an image file on my machine, it gives me the choice of using Image Viewer or Other. Image viewer is Eye Of Gbnome, which doesn't make use of my monitor profile, and I can't think of a convenient other program to use which does use the monitor profile.
    Is there some way to get firefox to view the image directly.
    I presume when I view images at a distant website, the color managment add-on is inter posing my monitor profile, but I am not sure about that. Is ther e some way to check it?

    You need an ICC profile for your printer.  Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you.  You download some software they provide, then print a test file on the exact same paper you are using for your cards.  Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file.  Once you have it, you'll be able to print accurate colors.
    There are other services out there that may cost less, but I do not know how reputable they are.  Chromix is a good business I've worked with many times.
    If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble.  Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

  • P55-GD65 (Bios 1.6) Need help with RAID-1 and SATA DVD-RW

    Sorry if this has been already asked; did a search.
    Trying to configure 2-Seagate Barracuda 7200.12 750 GB drives in a RAID-1.
    I also have a SATA DVD-RW plugged in as well.
    I enabled RAID mode = RAID in BIOS, pressed CTRL-I when booting to enter Intel's RAID configure screen, when there set the RAID 1 volume, exited.
    Booted into Windows XP, went to load the RAID driver and..... no DVD-RW to read the disk. ?
    Back in the BIOS, sure enough, all the SATA devices had disappeared except for SATA 7.
    Is this a restriction of Intel RAID - that you have any RAID, all the SATA ports are RAID only?
    I couldn't find any settings to choose which SATA ports are RAID and which are not.
    Thanks,

    Quote from: NovJoe on 11-February-10, 22:03:57
    Try to move your DVD drive to another SATA port.
    I did end up moving the DVD-RW to SATA7 and yes it shows up always.
    But that is a disappointment. Apparently, with these Intel SATA controllers, RAID is an all or nothing proposition - turn on RAID and that will be the only use for SATA1-SATA6. At least that's my theory; Intel doesn't spell this out. This is a bummer for me, as I had hoped to use SATA1 and SATA2 for a RAID-1 and hang other devices off SATA3-7.
    I could use the Jmicron RAID, as that uses just two ports, but that occupies SATA7 and SATA8, and (apparently) SATA8 is the eSATA connector on the rear panel - not very useful for a RAID.

  • Please need help with Updating photoshop CS6

    I want to update my PS CS6 because it quits unexpectly over and over but when I want to update , the updates goes up to 16,7 % and then update fails.. why and how can  i do it, anybody knows please ??

    Try Restoring Preferences.
    Photoshop Help | Preferences
    If that doesn't clear up the problem, use the CS Cleaner Tools in preparation for a software re-install.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Nancy O.

  • Need help with RAID Card and degraded Raid-5 errors

    Dear all,
    I recently purchased a used Apple RAID card for my 2008 Mac Pro 8-Core. The installation went smooth, the card was immediately recognized and the battery reconditioned within one night.
    So I started setting up a Raid Set with the 4 identical drives which I already used before as a software Raid. But each time the Raid Level-5 Volume is created, somewhat later the status turns red and the Raid is listed as "degraded"!
    A closer look at log reveals:
    +19:42:54 Drive carrier 00:01 inserted+
    +19:42:27 Background task aborted: Task=Init,Scope=DRVGRP,Group=RS1+
    +19:42:27 Degraded RAID set RS1 - No spare available for rebuild+
    +19:42:26 Degraded RAID set RS1+
    +19:42:22 Drive carrier 00:01 removed+
    +15:10:57 Created volume “R1V1” on RAID set “RS1”+
    So it seems that the drive from Bay 1 somehow gets lost (removed) a few hours after the volume is being created and anysoon later it's being "reinserted"...
    Of course, the drive is NOT removed, nobody touched the Mac Pro! Also I did the same procedure 3 times and the result was always the same.
    I also tried setting up JBOD and different RAID levels which do all work without a problem. Only when choosing RAID5 (what I intentionally bought the card for), the problem reappears
    Anyone any solution or hint for me concerning this problem? Many thanks in advance!

    One drive completely broke down later. Replaced that drive and since the problem's gone!

  • PLEASE - Need help with system audio files

    Hi guys, I'm going to try posting this one last night before throwing my hands up.
    I'm having a problem with my MacBook Pro where certain audio, namely in browsers like FireFox or Safari, doesn't output.
    YouTube and Google Video stream and display video content correctly, but no audio is output.
    System audio such as notifications, as well as iTunes, doesn't seem to be affected.
    I tried to follow the steps outlined in another post to check the output Hz setting for my midi device in the Audio MIDI Setup panel. However, this is what my panel looks like:
    http://static.flickr.com/48/12917458198120c9319_od.jpg
    It's simply blank, with "Output is not supported" displayed where those settings should be.
    Any ideas as to the root of this problem? It's almost like I'm missing a .plist file or some other system file, maybe something that got deleted using AppZapper? That's just a wild guess from a recent Mac convert after browsing the forums
    Thanks!

    First off, it makes total sense that you see "Output is not supported" for you microphone. Change the "Properties For:" drop down to "Built in Output" or whatever output device you are using. You will then see the audio output format and frequencies, but on the left side it will say "Input is not supported"
    Second, YouTube and Google Video don't use midi and so the Audio Midi Setup isn't really relevant to your problem at all and you should leave that alone... unless you are you a musician with a midi device setup. Perhaps this is the case, please post if it is. Otherwise you are headed down a blind alley messing with "Audio Midi Setup" to diagnose OR fix your issue.

  • Please need help with OWB client

    Hi All
    I have a problem where i can get into the OWB client but i cannot use the deployment manager, when i click on the deployment manager i get a blank pop up window, so now i want to uninstall and reinstall the OWB Client. I have a universal installer do i have to go through the universal installer to uninstall the OWB Client and reinstall it or is there any other way? It would be of great help if any one of you can post the procedure and the steps to follow.
    Thanks

    Which platform and OWB version is it? Can anyone else open the deployment manager for this repository on their systems?
    To reinstall you have to uninstall using the Oracle Universal Installer, or just install another image in a different home.
    Cheers
    David

  • Please need help with Inner Classes

    Hi! I have the following inner class, but it is not an "explicit" inner class:
    import java.util.*;
    public class EXTERIOR_NOEXPLICITA {
         private Vector i;
         public void llena_Vector(int a){
              i = new Vector();
              for(int z=0;z<=a;z++)
                   i.addElement(""+z);
         public Enumeration test() {
              return new Enumeration(){
                   int item = i.size()-1;
                   public boolean hasMoreElements(){
                        return(item >= 0);
                   public Object nextElement(){
                        if(!hasMoreElements())
                             throw new NoSuchElementException();
                        else
                             return i.elementAt(item--);
    My question is, how can I put it in an explicyt inner class?
    Plese help me! =)
    Raul

    I am not entirely sure what you mean by explicit inner class. If you mean converting your anonymous class into a nested class, then it is quite easy:
    import java.util.*;
    public class EXTERIOR_NOEXPLICITA {
      private Vector i;
      public void llena_Vector(int a) {
        i = new Vector();
        for (int z = 0; z <= a; z++)
          i.addElement("" + z);
      private final class MyEnumeration implements Enumeration {
        int item = i.size() - 1;
        public boolean hasMoreElements() {
          return (item >= 0);
        public Object nextElement() {
          if (!hasMoreElements())
            throw new NoSuchElementException();
          else
            return i.elementAt(item--);
      public Enumeration test() {
        return new MyEnumeration();

Maybe you are looking for