Please need help, working on this for days..
Hi, I currently have two laptops trying to connect to the internet through a router (obviously)..One of my laptops has an external linksys card, and can connect to the internet just fine. The other laptop...which is the one I REALLY want to connect to the internet is unable to, and has an internal card. But even though the internet does not show up..it will say that the network is connected after I run a program called WinsockFix. The network is using WEP 64-bit encryption, and the type of connection is PPoE. My question is...how come I can get the network to say connected, but not be able to access the internet? Also the laptop is able to get internet and connect to other linksys routers if I try. Please, I've been working on this for days, and have been successful with everything I have done, and help is greatly appreciated.!
But how can that be if its connecting to the right network? Even if it was how would I correct this problem...I mean even if I wire the laptop to the modem and router still nothing shows up...how can this be? All I get is that the page cannot be displayed.
Similar Messages
-
Itunes updated on my pc and laptop and now I cannot open the program on either one. Running Windows 7 on both. Error number 7 and R6034 continue to pop up. I have uninstalled (6 times) all of the Apple programs, rebooted, reinstalled, etc. as badgerfan1101 posted but cannot open it on either computer. I even did a restore to an earlier date with hopes that would solve the problem. Any other ideas? Been working on this for 4 hours
Hey gardenqueen1,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
I'm praying somebody here has an idea to help me. iCloud has suddenly gone nuts on my iMac. It works only when it wants to work and then stops for no reason. When it stops I am no longer able to click the mail icon and open any mail even the old stuff that was there. No changes were made to my computer. This all started out of the blue. When the mail stops working it will not close out to allow me to restart my computer. It won't even allow a forced quit. No changes were made to my machine. My iPhone still get mail but only after I click the mail icon. It does not pull mail in and show how many new emails I have like it did before. I have a me.com email if that helps. Any ideas would be truly appreciated.
Stewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck -
HT6154 phone enabled need help been like this for a while I think its a 2 possible 3
son locked his phone up its enabled can i not un lock it , using itunes?
thanksHello there,
It sounds like the phone is locked with a passcode you do not know how to reset. The following article should help you do that with iTunes:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thank you for using Apple Support Communities.
Regards,
Sterling -
Can someone pls help me?? Okay..I've been trying to fix this for DAYS now! When I sign in (under settings) w my new apple ID, then go to update or purchase something I cannot get the new apple ID to come up. It's still using the old one (which is disabled) ..please help!
Delete what? The ID's? They cannot be deleted - you just quit using it.
If you still have one old ID - that you have purchased content with - you are saying that the password no longer works with that ID? Did you try to reset the password for that ID?
Read this - instructions if the ID was disabled for entering the wrong password.
http://support.apple.com/kb/TS2446?viewlocale=en_US&locale=en_US
If it gets too involved - you can always contact support.
http://www.apple.com/support/appleid/
Just do not create another ID! -
I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I need help instantly on this program please
import java.util.*;
public class D3
private static int[] z = new int[100000];
private static int first=z[0];
private static int last=z[n-1];
private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
int binSearch(z;first;last;50000);
int seqSearch(z;35467;n); //method call 4 key where key in the left half
int binSearch(z;first;last;35467);
int seqSearch(z;89703;n); //method call 4 key where key in the right half
int binSearch(z;first;last;89703);
public int seqSearch(int z[];int key;int n)
long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z[i]=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
public int binSearch(int z[];int first;int last;int key)
long start = System.currentTimeMillis();
int count=0;
if(last<first){
count++;
index=-1;
else
count++;
int mid=(first+last)/2
if(ket=z[mid]{
index=mid;
else
if(key<z[mid]){
index = binSearch(z[];first;mid-1;key);
else
index=binSearch(z[];mid+1;last;key);
return index;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
// if anyone could tell me whats wrong with my code i'd be greatful...the program is supposed to perform binary and sequential search on a sorted array of 100000 numbers.once on an item in the middle of the array once on the right side of it and once on the left side...i also need to count the number of basic operations for the same number in both sequential and binary to see whats better.and i need to check the time...plz i need help now,,,"Guide to a first-time poster"
you need to add exclamation marks to signify how urgent it is
e.g.
i need help instantly on this program please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
capital letters is better
I NEED HELP INSTANTLY ON THIS PROGRAM PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
starting the italics on line 1, better again
import java.util.*;
public class D3
private static int[] z = new int[100000];
private static int first=z[0];
private static int last=z[n-1];
private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
int binSearch(z;first;last;50000);
int seqSearch(z;35467;n); //method call 4 key where key in the left half
int binSearch(z;first;last;35467);
int seqSearch(z;89703;n); //method call 4 key where key in the right half
int binSearch(z;first;last;89703);
public int seqSearch(int z[];int key;int n)
long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
public int binSearch(int z[];int first;int last;int key)
long start = System.currentTimeMillis();
int count=0;
if(last><first){
count++;
index=-1;
else
count++;
int mid=(first+last)/2
if(ket=z[mid]{
index=mid;
else
if(key><z[mid]){
index = binSearch(z[];first;mid-1;key);
else
index=binSearch(z[];mid+1;last;key);
return index;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
and what about the dukes, offer 10 (never to be awarded, of course)
do this, then sit back and watch the replies roll in. -
hello
i´m trying to do a proyect that requires modulate and demodulate a text in QAM. i´ve been trying this for days but i can´t come up with a solution, I can not retrieve the text I am modulating and i do not understand why. I am new to using Labview and would appreciate some help.
if anyone can help that would be great.
i have attached the vi that i´ve done.
thank you very much
Attachments:
intentoproyectocom2.vi 78 KBI beleive they used the same concept that they did in iOS. One folder deep. If you think they should implement somehting more, then please use the feedback links in the forums FAQs to leave your comments and suggestions.
Jason -
Please need help with this query
Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_datePerhaps something like this...
select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
from (
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id,
max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
where create_date = max_create_date
order by create_date -
hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue
Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock -
I can't log into the Itunes store. I type in my Apple ID and my password and the message "This Apple ID cannot be used for the iTunes Store." "Enter another Apple ID." I need help on fixing this.
Yeah I'm starting to see a ton of forums posts right now about the same thing :/ I wonder what's going on
-
My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent
If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files. -
Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
ThanksI did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?
-
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.
Maybe you are looking for
-
Hi, We have a date field in the form. I am validating date format as YYYY-MM-DD, validation works fine. But If user enters invalid date, how to validate date? For examples: 2006-02-31 It is an invalid date. How can i validate it. If anybody have samp
-
BO fails to display cloned reports with DATE_TIME data in View mode
Problem: We create a table using Rebean API. The table contains cells displaying DATE_TIME data (Detail). The cellu2019s formula is correct and the Applet shows the data alright. But when in view mode, there stand u201CINPUT_DATE_TIMEu201D text. If w
-
I need to paste tables from numbers to pages. everytime i do so, however, the axis, fonts, and all the stuff gets screwed up. With my old PC (ewww!, i know), i would use the "paste special" function and past the table as a picture, thereby preserving
-
Is Captivate not compatible with IVONAs SAPI5 voices?
Hi! I am using Captivate 6 and TTS to create training material. I've tried 5 voices from Neospeech but they all sound too much like a computer. I read that Captivate works with SAPI5-compatible voices so I bought a SAPI5-voice from IVONA (Amy). I rea
-
Hi Guys, When I click the save button at the BPS web applications, it will take two minute to save my data while it only take 10 second to save in BPS0. Anybody know how to improve this in Web application? Thanks