Please post the promo song! For the fans!

I really need the music "i see you, you see me, you show me who i could be..." from the HP ink advantage 2013/2014, i gonna use this music on my father birthday video, please, for the fans, post it HP, on YouTube, on Facebook, don't matter, just post, thank you

I really need the music "i see you, you see me, you show me who i could be..." from the HP ink advantage 2013/2014, i gonna use this music on my father birthday video, please, for the fans, post it HP, on YouTube, on Facebook, don't matter, just post, thank you

Similar Messages

  • Can someone please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
    thanks  Andy  Mountain Computers Inc.

    Hi,
    Try:
    e9lofxp874
    e9lofxp87r

  • Please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
         thanks  Andy  Mountain Computers Inc.

    Try
    e9lofxp874
    or
    e9lofxp87r
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Someone PLEASE post the 4S GSM unlocking procedure

    I've been on the phone for hours with global support.  Everyone says something different.  1 person said I need iTunes.  I didn't have iTunes so I hung up to download and install it.  I call back after and no one know what that person was talking about.  This person also told me if the unlocked worked I wouldn't see the Verizon logo in the top left anymore, I still see it on mine
    So can someone PLEASE post the procedure and tell me if there is a way I can verify the unlock worked when I'm still in the US.  Am I supposed to see ANYTHING when I insert a SIM from another country?  Because I'm not seeing anything
    Oh also, after the unlock works.  How do I switch it from CDMA to GSM only mode so I don't end up roaming on CDMA when I'm overseas
    Thanks

    Look for this post.. 
    Verizon iPhone 4S SIM UNLOCK Tutorial 
    Explains everything. 

  • Please post the ISO at the same time you post the fast track

    Dear Microsoft,
    Please post the ISO at the same time you post the fast track.  Your update downloads do not always go as planned (you upgrade the whole works, instead of just what changed) and it becomes necessary to wipe and reinstall with the current ISO.  Starting
    with a defunct ISO and then going through the various hoops to get to the current version is a several day job, not to mention that the same mechanism that caused an update to crash also will occur.
    And post it to a web site with a complete list of the various revisions.  List them one on top of another.  Do not have a separate web page with each new preview that has to be Googled to find.  Let us see them all in one place.
    Many thanks,
    -T

    TAM2
    Suggest you use the built in feedback tool.  That is the only way to contact those who are actually working on the OS.
    Wanikiya and Dyami--Team Zigzag
    Directions?
          --->
    How to Send Feedback to Microsoft in the Windows 10 Technical Preview
    Carey Frisch
    Thank you.  Right under my nose!
    And they are not letting me use the tool unless I have one of their idiot account.  Not going to happen.

  • Could the author of "zlib.zip" please post the c-sources for the CIN's?

    hi
    I am trying to use the labview zlib interface (from the code libary). My problem is, that I want to have
    the zlib.dll in the root directory of my application, which is not the same directory as the directory where the vi is. (and I don't want to have it in winnt\system32 either..)
    The Interface to the zlib.dll is made with cin's, so I'can't change it. If the author of the interface would post the c-sources it could be done..
    thanks
    (i really hope that there is answer to this question soon, otherwise I have to reprogram the interface by myself.. :-()

    OpenG.org is about to release a zip toolkit based on a modified version zlib.dll adapted to LabVIEW. Calls to DLL function are made using Call Libray node instead of CIN so you will be able to change the DLL path. It will be posted here as soon as the package is ready. It is Available for Windows, Mac and Linux.
    LabVIEW, C'est LabVIEW

  • AMD Phenom II users - please post the output of...

    I read the following on the safe cflags wiki page about k10 chips and want to triple check that it is accurate before I modify my kernel26-ck repo building script as such for the k10 family of processors.
    Can someone with an Phenom II processor please run the following 3 commands and post the output in this thread?
    uname -m
    head /proc/cpuinfo
    gcc -c -Q -march=native --help=target
    Thanks in advance
    Last edited by graysky (2011-06-11 14:29:53)

    graysky wrote:
    I read the following on the safe cflags wiki page about k10 chips and want to triple check that it is accurate before I modify my kernel26-ck repo building script as such for the k10 family of processors.
    Can someone with an Phenom II processor please run the following 3 commands and post the output in this thread?
    uname -m
    x86_64
    head /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 16
    model : 4
    model name : AMD Phenom(tm) II X4 925 Processor
    stepping : 2
    cpu MHz : 2812.391
    cache size : 512 KB
    physical id : 0
    siblings : 4
    gcc -c -Q -march=native --help=target
    -m128bit-long-double [disabled]
    -m32 [disabled]
    -m3dnow [disabled]
    -m3dnowa [disabled]
    -m64 [enabled]
    -m80387 [enabled]
    -m8bit-idiv [disabled]
    -m96bit-long-double [enabled]
    -mabi=
    -mabm [enabled]
    -maccumulate-outgoing-args [disabled]
    -maes [disabled]
    -malign-double [disabled]
    -malign-functions=
    -malign-jumps=
    -malign-loops=
    -malign-stringops [enabled]
    -mandroid [disabled]
    -march= amdfam10
    -masm=
    -mavx [disabled]
    -mbionic [disabled]
    -mbmi [disabled]
    -mbranch-cost=
    -mcld [disabled]
    -mcmodel=
    -mcpu=
    -mcrc32 [disabled]
    -mcx16 [enabled]
    -mdispatch-scheduler [disabled]
    -mf16c [disabled]
    -mfancy-math-387 [enabled]
    -mfentry [enabled]
    -mfma [disabled]
    -mfma4 [disabled]
    -mforce-drap [disabled]
    -mfp-ret-in-387 [enabled]
    -mfpmath=
    -mfsgsbase [disabled]
    -mfused-madd
    -mglibc [enabled]
    -mhard-float [enabled]
    -mieee-fp [enabled]
    -mincoming-stack-boundary=
    -minline-all-stringops [disabled]
    -minline-stringops-dynamically [disabled]
    -mintel-syntax
    -mlarge-data-threshold=
    -mlwp [disabled]
    -mmmx [disabled]
    -mmovbe [disabled]
    -mms-bitfields [disabled]
    -mno-align-stringops [disabled]
    -mno-fancy-math-387 [disabled]
    -mno-push-args [disabled]
    -mno-red-zone [disabled]
    -mno-sse4 [enabled]
    -momit-leaf-frame-pointer [disabled]
    -mpc
    -mpclmul [disabled]
    -mpopcnt [enabled]
    -mprefer-avx128 [disabled]
    -mpreferred-stack-boundary=
    -mpush-args [enabled]
    -mrdrnd [disabled]
    -mrecip [disabled]
    -mred-zone [enabled]
    -mregparm=
    -mrtd [disabled]
    -msahf [enabled]
    -msoft-float [disabled]
    -msse [disabled]
    -msse2 [disabled]
    -msse2avx [disabled]
    -msse3 [disabled]
    -msse4 [disabled]
    -msse4.1 [disabled]
    -msse4.2 [disabled]
    -msse4a [disabled]
    -msse5
    -msseregparm [disabled]
    -mssse3 [disabled]
    -mstack-arg-probe [disabled]
    -mstackrealign [enabled]
    -mstringop-strategy=
    -mtbm [disabled]
    -mtls-dialect=
    -mtls-direct-seg-refs [enabled]
    -mtune= amdfam10
    -muclibc [disabled]
    -mveclibabi=
    -mvect8-ret-in-mem [disabled]
    -mvzeroupper [disabled]
    -mxop [disabled]
    Last edited by konart (2011-06-11 15:39:34)

  • Intel Atom i686 users - please post the output of...

    I read the following on the safe intel cflags wiki page about core2 on 32 bit platforms:
    32 bit profile (x86):
    CHOST="i686-pc-linux-gnu"
    CFLAGS="-march=prescott -O2 -fomit-frame-pointer -pipe"
    CXXFLAGS="${CFLAGS}"
    Can someone with an atom processor please run the following and post the output?
    gcc -c -Q -march=native --help=target

    Hi graysky, here my output (N550):
    [email protected] ~>gcc -c -Q -march=native --help=target
    The following options are target specific:
    -m128bit-long-double [disabled]
    -m32 [enabled]
    -m3dnow [disabled]
    -m3dnowa [disabled]
    -m64 [disabled]
    -m80387 [enabled]
    -m96bit-long-double [enabled]
    -mabi=
    -mabm [disabled]
    -maccumulate-outgoing-args [disabled]
    -maes [disabled]
    -malign-double [disabled]
    -malign-functions=
    -malign-jumps=
    -malign-loops=
    -malign-stringops [enabled]
    -march= atom
    -masm=
    -mavx [disabled]
    -mbranch-cost=
    -mcld [disabled]
    -mcmodel=
    -mcrc32 [disabled]
    -mcx16 [enabled]
    -mfancy-math-387 [enabled]
    -mfma [disabled]
    -mfma4 [disabled]
    -mforce-drap [disabled]
    -mfp-ret-in-387 [enabled]
    -mfpmath=
    -mfused-madd [enabled]
    -mglibc [enabled]
    -mhard-float [enabled]
    -mieee-fp [enabled]
    -mincoming-stack-boundary=
    -minline-all-stringops [disabled]
    -minline-stringops-dynamically [disabled]
    -mintel-syntax [disabled]
    -mlarge-data-threshold=
    -mlwp [disabled]
    -mmmx [disabled]
    -mmovbe [enabled]
    -mms-bitfields [disabled]
    -mno-align-stringops [disabled]
    -mno-fancy-math-387 [disabled]
    -mno-push-args [disabled]
    -mno-red-zone [disabled]
    -mno-sse4 [enabled]
    -momit-leaf-frame-pointer [disabled]
    -mpc
    -mpclmul [disabled]
    -mpopcnt [disabled]
    -mpreferred-stack-boundary=
    -mpush-args [enabled]
    -mrecip [disabled]
    -mred-zone [enabled]
    -mregparm=
    -mrtd [disabled]
    -msahf [enabled]
    -msoft-float [disabled]
    -msse [disabled]
    -msse2 [disabled]
    -msse2avx [disabled]
    -msse3 [disabled]
    -msse4 [disabled]
    -msse4.1 [disabled]
    -msse4.2 [disabled]
    -msse4a [disabled]
    -msseregparm [disabled]
    -mssse3 [disabled]
    -mstack-arg-probe [disabled]
    -mstackrealign [enabled]
    -mstringop-strategy=
    -mtls-dialect=
    -mtls-direct-seg-refs [enabled]
    -mtune= atom
    -muclibc [disabled]
    -mveclibabi=
    -mxop [disabled]
    i use this flags:
    CFLAGS="-O2 -march=atom -mtune=atom -mssse3 -mfpmath=sse -fomit-frame-pointer -pipe"
    CXXFLAGS="$CFLAGS"
    MAKEFLAGS="-j4"
    Last edited by dieghen89 (2011-02-14 13:13:49)

  • Would Someone Please Post the Official Vista CD ON File Fr

    Would someone please post this on filefront so I can get it Please Thanks Regards WesMessage Edited by mickey3390 on 06-8-200703:8 PM

    :smileyvery-happy:Thanks again to you and all involved. Have you installed it yet and if so what were your results? I'll post my results tomorrow. Thanks again!!!!:smileyvery-happy:Message Edited by mickey3390 on 06-8-200704:3 PM

  • GSkill 1600Mhz Ram on NF980-G65 Please post stable settings here for 1600Mhz

    G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL on NF980-G65 Mobo.
     Please post here about what settings you are using to run this ram stable on NF980-G65 Mobo.
    Exactly what are you setting in the bios? Voltage= ?  Anything else?
    Our knowledge of knowing what works & how, can be greater then what we get told by some Reps.
     Please, let us help each other to help ourselves. We know better, we really use these Mobos.

    Believe Mike's statement was "not going to gain anything significant" rather than "won't gain anything". In my experience, a stable 1333 is far better than a problematic 1600. With some tweaks, 1333 can rival basic 1600 performance anyway. Should as little of a gain as 1 or 2 FPS at 1600 speed be considered significant? IMHO, CPU & VGA have a bigger influence on performance than RAM. This isn't helping answer your thread's original topic question however, so I hope Vorg or others can come back with some specifics that worked for them. Many times, even with similar systems & components, the results can't be duplicated unfortunately.

  • As a music company, how do i upload all our latest songs for our fans to buy on i-tunes store

    need help as to how i can upload all our latest songs onto i-tunes store for public/fans to buy.
    There is no signs on itunes about uploading music...... am bit confused and i need to do this soon

    wanjara records wrote:
    need help as to how i can upload all our latest songs onto i-tunes store for public/fans to buy.
    Start here >  http://www.apple.com/itunes/working-itunes/sell-content/

  • Could someone from support please post a credible fix for the fact that the Dreamweaver preview feature hasn't worked since FF3.6 came out, and still won't work in FF3.6.10

    Ever since FF3.6 came out there has been an issue with the Dreamweaver preview feature. As a result, I uninstalled 3.6 and am hanging out with 3.5.9 until this issue is resolved. Every time a new version of Firefox comes out I do a Google search to see if the issue has been resolved. I just did another search, and as of 9/23/10 with FF3.6.10 this issue is still not resolved. Could Firefox Support please provide a credible article about resolving this issue. People have been posting about it for years, and the only useful advice I have seen is for people to go back to 3.5.9 !?
    I am currently working with Mac OS10.4.11, and DW CS3, but I have seen people post about having this issue with Mac OS10.5 and DW CS4 and other configurations, so the problem seems pretty universal.

    A Dreamweaver CS user came up with a fix for Dreamweaver: <br />
    http://solutions.marketingmedley.com/
    There is a $5.00 fee for that Dreamweaver fix. That website and the fix are not associated with Mozilla in any manner. Support for that fix is provided by that that website via email.

  • Can someone please post the link to download CS5 for mac?

    My company purchased cs5 and I can't find the download link anywhere on the site!  Thanks in advance!!

    Legacy downloads are not avialable. Try this: ‘DDL’ Articles at ProDesignTools
    Mylenium

  • Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

    Hi,
    I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
    when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
    Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
    so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
    Could you please advise on this.
    Appreciate all and any help.
    Thanks,
    Divya

    Hi Divya,
    Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
    To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
    values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Using Time Machine, is it possible to backup all of my old emails. If so, please describe the process.

    I would like to be able to backup all of my old emails and remove them from the MacBook Pro HDD. I am using Time Machine and a Promise Pegasus RAID display. I can't seem to find any information about how this might be accomplished.  If any one  knows how to do this, please post the process in as much detail as possible. Thanks to all who respond.

    You cannot use a Time Machine backup as a substitute for storage on your computer's hard drive. For that you need a separate storage-only hard drive. If you haven't space on your hard drive, then you should think about getting a larger hard drive and/or moving files to a permanent storage drive.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Maybe you are looking for

  • AUTO CLEARING CONFIGURATION

    how to configur auto clearing (open item clearing ) wht is the use of GR/IR clearing account in f.13 plz tell use of both

  • Encrypted Time Machine Volume won't Unlock

    After encrypting a Time Machine backup, I can no longer access it. It was an existing backup, not a new one, and it had other important files as well. It was encrypted with the checkbox in the TM preferences pane, not FileVault or any other means. Wh

  • How to Resolve this - Enter an alternate path to a folder containing the installation package

    ong time back i develop a windows service with c# 4.0 and also create a setup file with VS2010 for that apps. i install that apps and it was running. someone remove that windows service not properly like removing some entry from registry regarding th

  • Nls_calendar='Arabic Hijrah'

    Hi All, Is any one using nls_calendar='Arabic Hijrah'? Its working fine but the only problem that we are facing is, oracle shows arabic date which is exactly less than one day of arabic date. i.e. if arabic data is 14th, oracle shows 13th. Any one ha

  • How to compare the values of 2 select queires in two diff DB's

    Hi, I need help in building the logic to achieve this : A program is needed to get reference data from ABC database in ORACLE and update our reference tables with any changes in DEF database in SYBASE. Pls give me an example where i can compare the s