Please shed some light on Chunked Transfer Coding for HTTP 1.1?

I am writing a HTTP proxy in Java, but I have a problem. I am writing a HTTP 1.0 proxy. As you probably know, HTTP 1.0 determines the length of the message body using Content-Length and HTTP 1.1 server are supposed to send a Content-Length header to HTTP 1.0 clients. However, several sites like Myspace is very buggy and do not do this. Could someone explain what the Chunked Transfer Coding is for HTTP 1.1? I read the documentation here http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.6 but it's all greek to me :(. Can anybody give me code/hints on how to deal with this?
Thanks in advance.

Hi, Toshi:
Most of these chat boards have become quite boring. Troubleshooting OSPF LSA problems is old news. But I do pop my head in every now and then. Also, there are so many other companies out there doing exciting things in the data center. You have Dell, Brocade, Arista, Juniper, etc. So one runs the risk of developing a myopic view of the world of IT by lingering around this board for too long.
If you want to use the new B22 FEX for the HP c7000 blade chassis, you certainly can. That means the Nexus will receive the FCoE traffic and leverage its FCF functionality; either separate the Ethernet and FC traffic there, or create a VE-port instantiation with another FCF for multihop deployments. Good luck fighting the SAN team with that one! Another aspect of using the HP B22 is the fact that the FEX is largely plug and play, so you dont have to manage the Flex Fabric switches.
HTH

Similar Messages

Can someone please shed some light...

I downloaded a few different apps onto my computer, i eventually managed to work out how to transfer them to my phone without too much trouble but when i press the icon to enter the app the screen goes blank for around 2 seconds as if its about to start but then returns to the homepage?
Any help appreciated
Mike

I have the same issue, except that it's all the aps, not just one. Suggestions please?

Please shed some light on Data Center design

Hi,
    I want you guys to recommend what the design should be. I'm familiar with HP blade system. Let me clarify the existing device.
1. HP Blade with Flex Fabric. It supports FCOE.
2. MDS SAN switch for the storage
3. Network Switch for IP network.
4. HP Storage.
    HP Blade has 2 interface types for IP Network(Network Switch) and Fiberchannel(SAN).
   What is the benifit for using Nexus switch and FCOE for my exising devices. What should be a new design with Nexus switch? Please guide me ideas.
THX
Toshi

Hi, Toshi:
Most of these chat boards have become quite boring. Troubleshooting OSPF LSA problems is old news. But I do pop my head in every now and then. Also, there are so many other companies out there doing exciting things in the data center. You have Dell, Brocade, Arista, Juniper, etc. So one runs the risk of developing a myopic view of the world of IT by lingering around this board for too long.
If you want to use the new B22 FEX for the HP c7000 blade chassis, you certainly can. That means the Nexus will receive the FCoE traffic and leverage its FCF functionality; either separate the Ethernet and FC traffic there, or create a VE-port instantiation with another FCF for multihop deployments. Good luck fighting the SAN team with that one! Another aspect of using the HP B22 is the fact that the FEX is largely plug and play, so you dont have to manage the Flex Fabric switches.
HTH

Please shed some light

Hi, I am using Time Machine with Time Capsule. It is always turned off but I initiate backups manually daily from the TM preference panel. I noticed that each time I launch a backup, a LOT of MBs are indeed backed-up even when I had little to none activity on my computer which is usually turned off all day at home. As an example, tonight I did a little regular browsing on a couple of sites, nothing more since my previous backup yesterday evening, but still Time Machine stored 690 MBs more I can't imagine that my browsing history is that significant in less than half-hour with now download! Am I missing something? Thanks for your help.

Normally TM does hourly backups. When you only backup manually on a daily basis many more files are changed then would have changed in an hour. You can minimize some of the data by excluding your /System/ and /Library/ folders from the backup. Files in these folders are constantly changed by OS X behind the scenes.

Can someone please shed some light on his log please?

We are running Crystal and one of our customers can't launch the reportviewer java applet. This works for everyone else but them. I need to try and find out if this is a crystal problem or a java problem but don't know enough about the java log (from the client's machine) to make sense of it. We already have a call into crystal but it's starting to look like it either is a java error or a proxy/firewall error. Any help would be greatly appreciated.
Thanks,
Frank
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\xxxxx
Proxy Configuration: Automatic Proxy Configuration
load: class com.crystaldecisions.ReportViewer.ReportViewer not found.
java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.UnknownHostException: reporting.xxx.com
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.UnknownHostException: reporting.xxx.com
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I whould focus on the line "Caused by: java.net.UnknownHostException: reporting.xxx.com"
I would try using "nslookup" with this hostname on the problematic machine. You should get output something like:
C:\>nslookup
reporting.xxx.comNon-authoritative answer:
Name: freexxxdotcomhosting.web1000.com
Address: 66.28.153.26
Aliases: reporting.xxx.com
exitC:\>

Can anyone shed some light on how to run window based application on mac air? I must run Meta Trader 4 platform and MS Office.

Hello,
Can anyone please shed some light on how I can run MS Office and Meta Trader 4 platform on mac air. I have been using Play on Mac and Wine for the past couple of weeks, but now suddenly it has stopped working, only crashing and giving me nightmares. Is it juts best to install the latest Windows or Parallel?
Regards Joe

Meta Trader 4 is Windows only - Office is available for the Mac and Windows and are mostly compatible but given that you'll be doing online trading you may prefer the Windows version of Excel since there are financial spreadsheets with macros that only run on the Mac with some significant editing.
You can install Windows 7 or 8 in BootCamp or any version of Windows usting virtualization. VMWare and Parallels are commercial programs and VirtualBox is open source. VB may be all you need. Whatever solution you choose, you'll need a commercial version of Windows (or get an OEM disc from NewEgg).

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

HT1338 I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.

I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop

My Macbook Pro (2009) just turns off sometimes with no warning and for no visible meaning. it switches on again afterwards but is so annoying! Anyone able to shed some light?

Hi all
I bought a second hand mac (boo i know but i am a student so cannot afford a new one!) it is a 2009 model, 15" with 8gb memory
It works fine until a point where it randomly switches itself off! I can be watching something, on photoshop, on iphoto or anything really and it just powers off.
I have found lots of threads saying the same except my mac switches itself back on automatically afterwards.
I have had the fans and filters cleaned and checked. It does not overheat (i have a cooling thing it rests on) and i dont have it working for hours on end before it does this, sometimes it will only be within 1o minutes of me turning it on!!!
Please help!
is anyone able to shed some light?
Also, i hope this problem is solvable personally because i dont have any warranty!
Thanks

Tried resetting SMC?
Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Hello there, Kyle.Kuz.
The following Knowledge Base article that provides some helpful pointers to help resolve your issue is:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

The Apple instructions with no luck. Grateful if anyone can shed some light on this !

I seem to be unable to locate or play iTunes Radio in iTunes. I have followed the Apple instructoins with no luck. Grateful if anyone can shed some light on this !

Thanks very much. Now I feel stupid!!

Can anyoen shed some light?

We are house parents at a high school dorm. We are wireless. I have a PB 17" running 10.3.9 with airport card, a brand new iMac with Airport Extreme card. I have tried to get my AE to connect to the wireless. The dorm is using Linksys WRT54G Router. It is in the attic of the house. I have a few questions.
1. How can I get my AE to show a blinking green light, not amber? I am not savvy when it comes to wireless, I'm OK with the operating system
2. How can I use my AE basestation to connect my Samsung laser printer so that the PB can print via the newtwork? I have it directly connect via USB to my iMac.
3. I have been reading about port forwarding and assigning a static IP address. I have tried to launch Airport Adm. Uti. but since I am not using the AE basestation, I can't get to the configure window. I have tried connecting to http://192.168.1.1 but I can't connect to it.
Can some shed some light? It would be greatly appreciated.
Leo

I have tried to get my AE to connect to the wireless.
By "AE" do you mean AirPort Express? AirPort Extreme? What?
2. How can I use my AE basestation to connect my Samsung laser printer so that the PB can print via the newtwork? I have it directly connect via USB to my iMac.
You can connect your printer to the USB port on an AirPort Express or AirPort Extreme base station (AEBS). If it is compatible, you won't have a problem.
I have tried to launch Airport Adm. Uti. but since I am not using the AE basestation, I can't get to the configure window.
The AirPort Admin Utility works with AirPort Express or AEBS.

Please shed some light on Chunked Transfer Coding for HTTP 1.1?

Similar Messages

Maybe you are looking for