Please suggest the Scenario

Dear Experts,
My Client has 3 company code
1) Cocd A 2) Cocd B 3)Cocd C
Cocd A will get sales Order from Customer ,
then Cocd A will create Purchase Order to Cocd B or Cocd C ( some time requires PR aslo).
now my client wants based on the PO raised by Cocd A , there should be automatic SO from Cocd B or Cocd C to Coca A
in another way right from the Sales order created by Cocd A everything should be automated means up to sales order raised by Cocd B or Cocd C to Cocd A.
plesae suggest me the different ways, how can i map in SAP
full Points will be rewarded.
Regards
venu gopal

hi
as per my understanding this is related to INTRA company process,
i can send you a document so that you can assume the same.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.

Similar Messages

  • Please suggest the Scenarios

    Dear Experts,
    My Client has 3 company code
    1) Cocd A 2) Cocd B 3)Cocd C
    Cocd A will get sales Order from Customer ,
    then Cocd A will create Purchase Order to Cocd B or Cocd C ( some time requires PR aslo).
    now my client wants based on the PO raised by Cocd A , there should be automatic SO from Cocd B or Cocd C to Coca A
    in another way right from the Sales order created by Cocd A everything should be automated means up to sales order raised by Cocd B or Cocd C to Cocd A.
    plesae suggest me the different ways, how can i map in SAP
    full Points will be rewarded.
    Regards
    venu gopal

    The sequence would be as follows:
    Lets say there is a sales Org A assigned to Cocd A and when you raise a PO on Vendor B i.e Company B, then the P.O of A shold be mapped to the Sales Order in Sales Org B where CoCd B has its own sales org B. The sequence of Order to Cash in Sales Org B then will be the standard scenario. Similarly for the rest.
    Now when Sales Org A receives a sales Order from Outside Customer, and the material is not in stock then use the Third party order to map the above scenario. In this case an automatic Purchase requisition  will be created and dumped into MRP. Purchase Orders will have to be created manually ofcourse after checking,
    Regds
    Jude

  • HT4623 How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only.  I am not looking for iOS 7 right now.  Please suggest the update process?

    Hi Team,
    I have iphone4 16GB with iOS 5.1.1.  While using the phone, few times the phone is automatically going to shutdown and getting call disconnected.  Some times, it happens more frequently in a day, sometimes not. 
    and also, How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only.  I am not looking for iOS 7 right now.  Please suggest the update process?

    You cannot. You can only upgrade to the currently supported version of the iOS which, at this time is iOS 7.0.2.

  • Please suggest the URL to display JSP report

    Hi Experts,
    Last week, we tried to change the memory of Response Cache and buffer Cache to increase the speed of the Excel report. But it didn’t work out.
    And from the below link, I understood we can convert the oracle 9i report to excel by converting the Oracle 9i report to JSP report.
    http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/index.html
    I’ve converted the Oracle 9i report to JSP report and finding the way to display the JSP report using Application Server. I am trying to find out the REPORT URL of simple JSP report and using Reports Servlet . Right now I am trying the below steps to display the JSP report in Application Server.
    Please suggest the URL for displaying the JSP report
    Thanks & Regards

    Please explain how any of this relates to the topic of this forum: "Database Upgrade."
    If you repost your question in the correct forum, or perhaps with the correct company, will be more likely to find the help you need. For example ... what App Server (make and model).
    Thank you?

  • Please suggest the best book or materila to learn EP Developement

    Please suggest the best book for learning Enterprise Portal developement in SAP ?  Which one is good in between below.
    1. SAP® NetWeaver Portal Technology: The Complete Reference by Rabi Jay ( How is this book in EP ?)
    2. SAP Authorization System: Design and Implementation of Authorization concepts for SAP R/3 and SAP Enterprise Portals by IBM Business Consulting (sap press book).
    Regards
    Badari

    Hi,
    For Content Developments you can refer below links
    LINKS FOR BEGINNER:
    Beginning EP Development
    Oliver's favorite SDN link collection
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/387daf90-0201-0010-bb98-cb1a5545bf69
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/4b0c105e-0501-0010-bcb0-92478a4b2a17
    Overview of the Content Development Process
    Overview of the Content Development Process
    Java development methodologies (Part I)
    Java development methodologies (Part I)
    Java development methodologies (Part II)
    Java development methodologies (Part II)
    Setting up the NetWeaver development environment (Part II)
    Setting up the NetWeaver development environment (Part II)
    Installing and configuring the preview edition of EP
    Installing and configuring the preview edition of EP
    Top Weblogs of All Time [19 to 14]
    Top Weblogs of All Time [19 to 14]
    Enterprise Portal Implementation Forum
    Enterprise Portal Implementation Forum
    Beginning EP Development
    http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/40e93bac3c5a6de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/50/da644160087d47e10000000a1550b0/frameset.htm
    Have a look at the following threads to have an introduction to portal:
    Hi
    What is EP ??
    For kick start in portal, the following Wiki link is enough:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/introduction%2bto%2bportal
    You can now see the following threads which already have similar question discussed, you will get lots of links in these threads:
    Start with EP
    e-Books on EP
    Portal Development
    Portal 7.0 Documentation
    Beginner to EP
    Thanks
    Santosh

  • BAPI_REQUISITION_CHANGE  please suggest the mandatory  fields.

    I am using the Bapi_requisition_change  in se 37 .
    i am inputting the following parameters
    NUMBER                          10032908
      REQUISITION_ITEMS_OLD
    REQUISITION_ITEMS_NEW
    REQUISITION_ACCOUNT_OLD
    REQUISITION_ACCOUNT_NEW.
    but following error is coming while executing the fs.
    Data in REQUISITION_ITEM_OLD for item 00010 does not correspond to current database status
    and also please suggest the mandatory fields for this bapi

    Shashi,
    Try this:
    report z_po_req_create.
    DATA : T_REQUISITION_ITEMS LIKE BAPIEBANC OCCURS 0 WITH HEADER LINE,
    T_RETURN LIKE BAPIRETURN OCCURS 0 WITH HEADER LINE .
    DATA : E_NUMBER LIKE BAPIEBANC-PREQ_NO.
    T_REQUISITION_ITEMS-DOC_TYPE = 'NB'.
    T_REQUISITION_ITEMS-DEL_DATCAT = '1'.
    T_REQUISITION_ITEMS-DELIV_DATE = '20020626'.
    T_REQUISITION_ITEMS-PLANT = 'P1'.
    T_REQUISITION_ITEMS-STORE_LOC = '01'.
    T_REQUISITION_ITEMS-PUR_GROUP = 'P01'.
    T_REQUISITION_ITEMS-MAT_GRP = '01'.
    T_REQUISITION_ITEMS-PREQ_ITEM = 1.
    T_REQUISITION_ITEMS-MATERIAL = '1MAT1'.
    T_REQUISITION_ITEMS-QUANTITY = 10.
    T_REQUISITION_ITEMS-PREQ_NAME = '123456'.
    T_REQUISITION_ITEMS-PURCH_ORG = '1000'.
    T_REQUISITION_ITEMS-ACCTASSCAT = 'U' .
    T_REQUISITION_ITEMS-VEND_MAT = 'G'.
    APPEND T_REQUISITION_ITEMS.
    CALL FUNCTION 'BAPI_REQUISITION_CREATE'
    EXPORTING
    SKIP_ITEMS_WITH_ERROR =
    IMPORTING
    NUMBER = E_NUMBER
    TABLES
    REQUISITION_ITEMS = T_REQUISITION_ITEMS
    REQUISITION_ACCOUNT_ASSIGNMENT = T_REQ_ACCOUNT_ASSIGNMENT
    REQUISITION_ITEM_TEXT =
    REQUISITION_LIMITS =
    REQUISITION_CONTRACT_LIMITS =
    REQUISITION_SERVICES =
    REQUISITION_SRV_ACCASS_VALUES =
    RETURN = T_RETURN
    REQUISITION_SERVICES_TEXT =
    EXTENSIONIN =
    REQUISITION_ADDRDELIVERY =
    IF NOT E_NUMBER IS INITIAL .
    WRITE:/ 'REQ NO:' , E_NUMBER , 'CREATED'.
    ELSE.
    LOOP AT T_RETURN.
    WRITE T_RETURN-MESSAGE.
    ENDLOOP.
    ENDIF.
    Reddy

  • Can anybody please suggest the way i can get all the indexes on a cache

    Can anybody please suggest the way i can get all the indexes on a cache?

    Hi,
    If you want to just see what there is at the moment, the StorageManager mbean IndexInfo attribute shows the toString() representation of the extractor of each index.
    If you want to get it programmatically, you can get hold of it by sending an entry-processor to a key, then casting the entry to BinaryEntry, and calling BinaryEntry.getBackingMapContext().getIndexMap() to get the same Map<ValueExtractor,MapIndex> of indexes which the index aware filters get.
    Best regards,
    Rob

  • Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

    My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Please explain the scenario

    Experts
    Please explain below scenario
    1.Create a Formula variable with processing by replacement path
    2.Assign it to the key figure associated with the characteristic
    3.Create a new key figure based on the formula variable
    4. Set the exception threshold for this new key figure.
    Thanks In Advance
    Ravi

    Hi,
    <i>2.Assign it to the key figure associated with the characteristic
    3.Create a new key figure based on the formula variable
    4. Set the exception threshold for this new key figure.</i>
    For your second question, i think you are restricting the One characterstic with a keyfigure.
    Go to Rows> right click>New selection--> in this select the characterstic you want, and right click --> restrict with the key figure ,with which you want to.
    3.Go to Rows>right click>New selection--> select the key figure,and restrict with the Formula variable.
    Hope you understand it.
    Assign points if it helps..........

  • Please suggest the best approach

    Hi ,
    e have a requirement of integrating two webcenter/ADF 11.1.1.6 applications .Thease two applications are running on two different environments.
    Please suggest us the best approach.
    As per the documentation we have the options:
    1) 2nd App consume as porrtlet in 1st APP
    2) Using pagelets
    3) Remote taskflows
    Cons of the above approaches:
    1) If we render as ADF portlet some of the features will not work like popus.
    2) If we use pagelets then we have to call pagelets from Iframes,as per security reasons customer
    ask us to not to go for this option
    3) If we use remote taskflow we can't include in portion of the page as portlet
    So we are in a confusion as which one to use.please suggest us best approach
    Regards
    Babu.

    In addition to Note: 559518.1, please refer to the docs referenced in (Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]).
    Thanks,
    Hussein

  • Hi! I bought my notebook in october last year but from last month oftenly my WiFi connection hangs up nd stops catching any available Wifi connection? please suggest the solution

    Hi! I bought my Macbook Pro 13" in october last year but from last month oftenly my WiFi connection hangs up nd stops catching any available Wifi connection?
    At last I restart the modem and dn it catches the signal but that too is short lived.
    please suggest some solutions
    Thanking U,

    I have this problem on my home network but at the same time when my connection hangs up my other wifi machine remians connected. So i think there's no problem with the modem.

  • Please suggest the fastest way to install Solaris x86 PC 30 boxes

    I've already tested one and it's successfully installed.
    I have to install 30 boxes , all are same spec.
    Please advise the fastest procedure to install.
    Note : There is no sparc machine.

    Only problem with imaging a Solaris x86 box is that your machines will end up with the same hostid (which is pseudo-randomly generated at Solaris installation time for x86). This may, or may not, be a problem, depending on what commercial software you use...
    To avoid this, you have to use jumpstart, or do some serious hacking.

  • Please suggest the sql query

    I have a column and the value in it is 123456789
    i want to get the output in horizontal way as 1,2,3,4,5,6,7,8,9

    Hi,
    Try this please
    SELECT REGEXP_REPLACE('123456789' ,'(.)', '\1,') AS REPT from DUAL

  • How i can rotate the webview in all the 4 direction by button action ,please suggest the awnser for that

    Hi  Anyone can give the idea for rotate the webview in view in  all the direction by button clicked action.

    I have not simple soluce but only a crazy idea :
    Export VI as VI Strings (VI Method) then search for each text file the corresponding info such as :
    <BDCONTENT>
    <CONTROL ID=81 type="String Constant" >
      <DESC></DESC>
      <TIP></TIP>
      <PARTS>
       <PART ID=11 order=0 type="Text"><LABEL><STEXT>TEST</STEXT></LABEL></PART>
      </PARTS>
      <DEFAULT><SAME_AS_LABEL></DEFAULT>
     </CONTROL>
    but I recognize it's long & delicate to develop it, surely very long in execution time...
    It's only to help but I hope there exists a better way
    Message Edité par J.DECHET le 01-13-2010 12:45 PM

  • Please suggest a correction in the code: Urgent

    I am capturing the Material Document No., Material No., Material Description, Quantity etc. into a main_table in my code so as to write/print labels containing GRN details (movement type '105') using se38. These labels are to be pasted on the material received in stores, the exact requirement is 100% material identification sticker on all items to maintain FIFO. Obviously the no. of these stickers, to be printed, shall solely depend on the Quantity of a particular material received.
    I have written the following piece of code to print the captured information of GRN. The problem is that my code is unable to track the change in material document number. For example if I have 10 nos of quantity for a particular material say 1001 and 5 no.s of quantity for a subsequent material 1002. I should get 10 labels for 1001 and 5 for 1002 but my code is giving me 10 labels for 1002 also.
    Hope you got it.
    Please suggest the necessary correction on the following code.You can execute the following code and get a real time feeling of my problem.
    REPORT  ZMM_GRN_LABEL_REPORT_38.
    TABLES : MKPF, MSEG, MAKT.
    DATA : BEGIN OF I_MKPF OCCURS 0,
           MBLNR LIKE MSEG-MBLNR,
           BLDAT LIKE MKPF-BLDAT,
           MJAHR LIKE MKPF-MJAHR,
           END OF I_MKPF.
    DATA : BEGIN OF I_MSEG OCCURS 0,
           MBLNR LIKE MSEG-MBLNR,
           MATNR LIKE MSEG-MATNR,
           EBELN LIKE MSEG-EBELN,
           LIFNR LIKE MSEG-LIFNR,
           MENGE LIKE MSEG-MENGE,
           END OF I_MSEG.
    DATA : BEGIN OF I_MAKT OCCURS 0,
           MATNR LIKE MAKT-MATNR,
           MAKTX LIKE MAKT-MAKTX,
           END OF I_MAKT.
    DATA : BEGIN OF I_LFA1 OCCURS 0,
           LIFNR LIKE LFA1-LIFNR,
           NAME1 LIKE LFA1-NAME1,
           END OF I_LFA1.
    DATA: BEGIN OF MAIN_TABLE OCCURS 0,
          MBLNR LIKE MSEG-MBLNR,
          MATNR LIKE MSEG-MATNR,
          BLDAT LIKE MKPF-BLDAT,
          MAKTX LIKE MAKT-MAKTX,
          MENGE LIKE MSEG-MENGE,
          MJAHR LIKE MSEG-MJAHR,
          EBELN LIKE MSEG-EBELN,
          LIFNR LIKE MSEG-LIFNR,
          NAME1 LIKE LFA1-NAME1,
          END OF MAIN_TABLE.
    DATA : N LIKE MSEG-MENGE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS: S_MBLNR FOR MSEG-MBLNR.
    PARAMETERS : P_GJAHR LIKE MSEG-GJAHR.
    SELECTION-SCREEN END OF BLOCK B1.
    select MBLNR MJAHR BLDAT
    into corresponding fields of
    table I_MKPF
    from Mkpf
    where
    MBLNR in S_MBLNR and
    MJAHR EQ p_GJAHR.
    LOOP AT I_MKPF.
    MAIN_TABLE-MBLNR = I_MKPF-MBLNR.
    MAIN_TABLE-MJAHR = I_MKPF-MJAHR.
    MAIN_TABLE-BLDAT = I_MKPF-BLDAT.
    APPEND MAIN_TABLE.
    CLEAR MAIN_TABLE.
    ENDLOOP.
    IF I_MKPF[] IS NOT INITIAL.
    SELECT MBLNR MATNR EBELN LIFNR MENGE
    INTO CORRESPONDING FIELDS OF
    TABLE I_MSEG FROM
    MSEG
    FOR ALL ENTRIES IN I_MKPF
    WHERE
    MBLNR = I_MKPF-MBLNR.
    ENDIF.
    LOOP AT I_MSEG.
    LOOP AT MAIN_TABLE WHERE MBLNR = I_MSEG-MBLNR.
    MAIN_TABLE-MATNR = I_MSEG-MATNR.
    MAIN_TABLE-EBELN = I_MSEG-EBELN.
    MAIN_TABLE-LIFNR = I_MSEG-LIFNR.
    MAIN_TABLE-MENGE = I_MSEG-MENGE.
    MODIFY MAIN_TABLE INDEX SY-TABIX.
    ENDLOOP.
    ENDLOOP.
    IF I_MSEG[] IS NOT INITIAL.
    SELECT MATNR MAKTX
    INTO CORRESPONDING FIELDS OF
    TABLE I_MAKT FROM MAKT
    WHERE
    MATNR = I_MSEG-MATNR.
    ENDIF.
    LOOP AT I_MAKT.
    LOOP AT MAIN_TABLE WHERE MATNR = I_MAKT-MATNR.
    MAIN_TABLE-MAKTX = I_MAKT-MAKTX.
    MODIFY MAIN_TABLE INDEX SY-TABIX.
    ENDLOOP.
    ENDLOOP.
    IF I_MSEG[] IS NOT INITIAL.
    SELECT LIFNR NAME1
    INTO CORRESPONDING FIELDS OF
    TABLE I_LFA1 FROM LFA1
    FOR ALL ENTRIES IN I_MSEG
    WHERE
    LIFNR = I_MSEG-LIFNR.
    ENDIF.
    LOOP AT I_LFA1.
    LOOP AT MAIN_TABLE WHERE LIFNR = I_LFA1-LIFNR.
    MAIN_TABLE-NAME1 = I_LFA1-NAME1.
    MODIFY MAIN_TABLE INDEX SY-TABIX.
    ENDLOOP.
    ENDLOOP.
    ******************************Problem lies somewhere here
    N = MAIN_TABLE-MENGE.
    DO N TIMES.
    SORT MAIN_TABLE BY MBLNR.
    LOOP AT MAIN_TABLE.
    WRITE :/5 MAIN_TABLE-MBLNR.
    WRITE :/5 MAIN_TABLE-MAKTX, 50 MAIN_TABLE-MATNR.
    ENDLOOP.
    ENDDO.

    Hello,
    Take one new table with three fields ie. it_no with mblnr, matnr and menge.
    collect data to new table form main_table.
    and replace your doubtful code by
    SORT MAIN_TABLE BY MBLNR.
    loop at it_no.
    N = it_no-MENGE.
    DO N TIMES.
    LOOP AT MAIN_TABLE where matnr = it_no-matnr.
    WRITE :/5 MAIN_TABLE-MBLNR.
    WRITE :/5 MAIN_TABLE-MAKTX, 50 MAIN_TABLE-MATNR.
    ENDLOOP.
    ENDDO.
    endloop.
    regards,
    Naimesh

Maybe you are looking for