Please tell me how to set up GMAIL on IMAP on my E...

I am a good man... I have not harmed anyone in my life..... I pay Taxes, and I give to Charity generously... !
Please tell me how to set up GMAIL on IMAP on my E71 before I shoot myself !!!
The NOKIA instructions on the manual are carp, and I cannot follow it !!! ( I have a masters degree in computer science and I still cant set up this damm email..)
OK..this is what I want to happen... :
1. I want my GMAIL emails to be pushed onto my E71 realtime, and I want a nice 'beep' to tell me I have a new email.
2. I want email notifications 24 hours a day..
2. I want to keep my GPRS on all the time so I get realtime GMAILs arriving on my E71.
Please... can anyone help me...
Thank you from Harry (alive so far....)
Solved!
Go to Solution.

Hi, If any is interested in how to set GMAIL up on the build in Email on the E71 you can follow the below instructions:
1. Go to messaging (same place as your SMS-inbox), select options and choose Settings
2. in the settings menu choose E-mail
3. In the E-mail menu select Options and choose New mailbox
4. Then an information comes "Information is needed to activate existing mailbox. Needed information varies, depending on e-mail service provider. Answer the following queries".
5. Select start and answer Yes to " Allow connection" and then "Connecting to Server" will be displayed shortly.
6. Then 2 new options are possible - chose E-mail
7. Enter your E-mail address on GMAIL ([email protected])
8. Enter your E-mail password on GMAIL (??)
9. Then "Defining Email Settings" is displayed shortly and then "Wizzard completed" - Your Gmail is now ready to use on your E71.
Hope this helps,
HP2Watch

Similar Messages

Can anyone please tell me how to set a long tip dynamically?

Hi Team,
Could you please tell me how to set a longtip dynamically??
Thanks,
Swetha S

Hi Shweta,
As mentioned, the parameters for the setLongTip(OAPageContext pageContext, String tipMessageApplShortName, String tipMessageName)
Instead, you are passing setLongTip(pageContext,String string). Put in the Message Application Short Name and respective Message name in above method parameters.
Regards,
Zahid

How to set the Health app on my iPod touch(5th gen.)? Can you please tell me how to set it step by step ? Thank you ️

I've been trying to set my health app since it came out with IOS 8. But every time I selected my data and everything , nothing happened.
Can you please tell me exactly how to set it ?

Maybe:
Use Health on your iPhone or iPod touch with iOS 8 - Apple Support
http://www.cnet.com/how-to/apple-health-app-how-to-set-up-import/
http://blog.human.co/posts/human-ios-health.html
Not that all feature re not available on an iPod.
If you have problem please provide more details of your problem. Like what you did, what you tap and what happened or did not happen

Could someone PLEASE tell me how to set up more than one POP mail account.

I am soooo frustrated. Before I upgraded to Tiger I had no problems setting up my mail accounts. Now, I can only set up one POP mail account. I have three mail accounts that I desperately need to set up from the same ISP server, all POP accounts. On Panther and earlier, all I had to do was add the accounts. Now I have ONE POP account and when I try to set up another I get an error message that I already have a POP account set up. Why is this happening and what happened to the old system that worked just fine. I am so annoyed with this. It simply defies logic!!!!

I don't know if this will work or not, but why don't you try using bogus pop and/or smtp server information when you initially establish the accounts with Mail's setup wizard? Just continue through the "warning: cannot validate server" messages that the wizard will give you. Then go into Mail > preferences > accounts and highlight each of the new accounts, one at a time, and try changing the incoming pop and outgoing smtp mail server information to what it is supposed to be?
For the "Outgoing" server just use the pull-down menu, to select it, and when all accounts are done, go into that same pull-down menu and choose "Edit Server List..." to remove the bogus smtp server information.
Incoming should be just renaming that pop server in the "Incoming server" field.
If that doesn't work, I've got something riskier you could try, again with no guarantees, and that is editing your ~/Library/Preferences/com.apple.mail.plist file using either the Property List Editor that comes with XCode Tools (will launch automagically when you click on that .plist file if XCode is installed) or with the pico editor in Terminal, and possibly renaming some folders in your ~/Library/Mail folder, too. Again, start with the bogus server info, then find those entries in the .plist file and make changes there.
Note: if not familiar with the notation, "~" means your "home" directory.
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider marking this reply as "helpful" or "solved," in addition to, if applicable, marking this question as "answered")

How to set up Gmail as IMAP in Mail without downloading messages from 2007?

I was fine with Gmail on Apple Mail on my Macbook Pro using POP, but in order to best sync with my newly acquired iPhone I changed it to IMAP. Now it's proceeding to download all 7000+ messages from by Gmail Inbox from 2007. Is there no way to limit Apple Mail to the most recent 30 days of Gmail?
My last resort would be to delete most of my messages in Gmail, but there's not even a filter for that, and I'd prefer not having to do so.
Message was edited by: Tux Kapono

This is not an Apple Mail problem, but the nature of IMAP, if in Mail Preferences/Accounts/Advanced you select to Keep copies of All messages, or Keep copies of All messages and their attachments for Offline viewing. Also, from your browser interface with Gmail you can choose to exclude the All Mail folder.
Ernie

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

Drag the entire group into the To: field of a new message. The group is in your Address Book. You've used a name for it, like My Group. You can simply start typing "My Group" in that To: field and it should appear in a context menu.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting. Please tell me how can i get it or how i would be able to download and install ios update without using computer

Hi
I am using iphone 3gs running on ios 5.1.1
I didn't find any software update option at any place in setting.
Please tell me how can i get it or how i would be able to download and install ios update without using computer

Just use the phone the way it is, forget the apps.

HT5312 Hi I can't remember the answer to my security questions and I don't think I set up a rescue email adders when opening my account can you please tell me how I can gain access to my account

Hi I can't remember the answer to my security questions and I don't think I set up a rescue email adders when opening my account can you please tell me how I can gain access to my account

Didn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can reset the questions.
(90530)

Please tell me how I can set an array field to an object?

Hi,
Please tell me how I can set the plID (an array field) to an object? This result is for one Agent object. Suppose the Agent object only has these two fields.
If a sql query result is something like this (which is one object).
agent_last PLID
smith      5
smith               6
smith               7
Agent agent = new Agent();
StringBuffer sql = new StringBuffer();
int count = getPLNo(agentID);// # of the query result
try {
SQL tsql = new SQL();
Connection conn = tsql.getConnection();
sql.append("SELECT agent_last, b.PLID ");
sql.append("FROM Agent a, PL b ");
sql.append("where a.agent_id = b.agent_id ");
sql.append("and a.agent_id = ? ");
PreparedStatement st = conn.prepareStatement(sql.toString());
st.setInt(1, agentID);
ResultSet rs = st.executeQuery();
while (rs.next()) {
agent.setAgentID(agentID);
agent.setAgentLast(rs.getString(1));
for ( int i = 0 ; i < count; i++ ) {               //how to do it?
agent.setPrivateLabelID(new int[] {rs.getInt(2)});//how to do it?
st.close();
rs.close();
tsql.close();
} catch (SQLException e) {
System.out.println("SQL: " + e.getMessage());
throw new Exception(e.getMessage());
} catch (Exception e) {
System.out.println("Except: " + e.getMessage());
throw new Exception(e.getMessage());
return agent;
}

If that's not what you're looking for, then you get
what you pay for. :-)Hi fmeyer75,
Thank you very much for your input. That's exactly what I was looking for and it works!!!!
For anyone who has similar issue, I changed the code a little to make it work with my existing ones. I never splited queries before, so please tell me if there's a better way to handle it.
I keep the first half part and changed a little for the second half. Below is what I use now
sql.setLength(0);
sql.append("SELECT PLID ");
sql.append("FROM PL ");
sql.append("where agent_id = ? ");
List list = new ArrayList();
PreparedStatement st2 = conn.prepareStatement(sql.toString());
st2.setInt(1, agentID);
ResultSet rs2 = st2.executeQuery();
while (rs2.next()) {
             list.add(new Integer(rs2.getInt(1)));
agent.setPrivateLabelID(new int[list.size()]) ;
for ( int i = 0 ; i < list.size(); i++ ) {
agent.getPrivateLabelID() = ((Integer)
list.get(i)).intValue() ;
st.close();
rs.close();
st2.close();
rs2.close();

Can someone please just tell me how to set up a network?

Okay so here is the problem. I have an iMac G4 and I am getting a new intel one. I have an airport connected to a 2wire gateway. I would like to setup a network for file sharing, printer sharing, the works. I don't care about using the airport extreme but I just want to be able to find a step by step process on how to do this. I cannot find this information anywhere. I feel like it is something I know how to do that I just forgot so sorry if this is a stupid question that is posted everywhere but can someone please just tell me how to set it up? Oh yea, I also wanted to use this network to migrate my old mac to my new mac. Thanks.
Message was edited by: jhidalgo

Creating a small Ethernet network
Mac OS X- Connecting to the Internet via cable, DSL, or local area network (LAN)
Mac OS X- Connect to the Internet, troubleshoot your Internet connection, and set up a small network
Mac OS X 10.5 Help- Sharing your computer with others on your network
OS X 10.5- Using printer sharing with different versions of Mac OS X
Printer Sharing from MacOSX
Setting up a local Ethernet network
Equipment needed:
Cable/DSL modem: usually supplied by the ISP
Gateway/Router: at least a 4-port router, but you can get them with more ports if you need them. (Alternatively, you can get a switching hub to provide additional ports.)
CAT 5 Ethernet cables: one cable is needed for each device connected to the router plus one to connect the router to the cable/DSL modem.
1. Connect the Cable/DSL modem to the router's WAN port using an Ethernet cable (CAT 5 for 10/100.)
2. Connect each computer to the router's LAN ports using Ethernet cables. If you have network printers, etc. connect them to a LAN port on the router. If the router doesn't have enough ports, then you will need to purchase one with more ports or connect a switching hub to the router.
3. Now, for each Mac open its Network preference pane. Select the Built-in Ethernet port for configuration. In the TCP/IP configuration window set the connection/configuration to DHCP from the dropdown menu. Set your Location dropdown menu to Automatic and the Show dropdown menu to Built-in Ethernet.
4. Shut everything off. First, turn on the Cable/DSL modem and wait for the connect lights to indicate it has connected to the ISP. Next, turn on the router and wait to see if the Cable/DSL modem's communication status light starts to flicker. Also, if there is a status light on the router it should show a connection. Last, power up the computer. If all is well the TCP/IP control panel or Network pref pane should indicate an IP has been obtained from the router, usually in the 192.168.nnn.nnn range. If it's 169.xxx.xxx.xxx then you don't really have a connection.
5. If you have network printers connected each printer will have to be assigned its own unique IP address in the router's address range (usually 192.168.nnn.nnn.) Assign the printer(s) IP addresses above the number of computers that will be connected but within the router's DHCP address assignment range. Consult the router's documentation for that information. Consult the printer manual for how to assign an IP address to the printer. When you install the printer driver and/or Add the printer you will add it as an IP printer or LPR printer and use the IP address you assigned to the printer.
Most of this information can also be found by selecting Mac Help from the Finder's Help menu and searching on the appropriate term, e.g., sharing, network, printing.

Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

Question
Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

I'm not seeing a screenshot, so could you please try another time to attach one?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you use the location bar and not the (Google) search bar.
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

I can not sync my mailboxes with Icloud. I would like to see the same mails in all my apple devices. Can someone please tell me how? My calendar and contacts sync but my mailboxes dont...

I would like to see the same mails in all my apple devices. Can someone please tell me how? My calendar and contacts sync but my mailboxes dont...

I would like to see the same mails in all my apple devices.
On iOS devices tap Settings > iCloud
Make sure Mail is swtiched ON.
Apple - iCloud - Learn how to set up iCloud on all your devices.

Could you please tell me how to resolve the following import error? Thanks.

Hi,
When run the following command to import two tables:SPSSDMRESPONSE_LOG and SPSSSCORE_LOG, there are some error in the log. Could you please tell me how to resolve these error? Thanks.
Command:
imp S3SLORL10/Pass1234@SPSS file=/yhan/subTables.dmp ignore=y tables=SPSSDMRESPONSE_LOG,SPSSSCORE_LOG
There are some error in the log file.
The log file is:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing S3SLORL10's objects into S3SLORL10
. importing S3SLORL10's objects into S3SLORL10
IMP-00061: Warning: Object type "S3SLORL10"."Info224_T" already exists with a different identifier
"CREATE TYPE "Info224_T" TIMESTAMP '2011-09-21:06:54:13' OID 'A1F8D176EF2949"
"07882153DE7E4CC9F9' AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LI"
"ST_T","Response" "Response225_COLL","Property" "ModelOutput223_COLL")FINAL "
"INSTANTIABLE "
IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSDMRESPONSE_LOG" because object type "S3SLORL10"."Info224_T" cannot be created or has different identifier
IMP-00061: Warning: Object type "S3SLORL10"."Metric214_COLL" already exists with a different identifier
"CREATE TYPE "Metric214_COLL" TIMESTAMP '2011-09-20:09:56:02' OID '98999BF48"
"84F4BAB81D391109E4BB823' AS VARRAY(2147483647) OF "nameValueT"
"ype208_T""
IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSSCORE_LOG" because object type "S3SLORL10"."Metric214_COLL" cannot be created or has different identifier
IMP-00017: following statement failed with ORACLE error 942:
"ANALYZE TABLE "SPSSDMRESPONSE_LOG" ESTIMATE STATISTICS "
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942:
"ANALYZE TABLE "SPSSSCORE_LOG" ESTIMATE STATISTICS "
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
Import terminated successfully with warnings.

*Import of table containing object type(s) fails with IMP-00061 IMP-00063 [ID 203822.1]*
in short: search for the TOID_NOVALIDATE parameter

Can anyone please tell me how the attribute node in LABVIEW ( ver 5) in builtin INSTRUMENT I/O exampe file

Can anyone please tell me how the attribute node in LABVIEW ( ver 5) in builtin INSTRUMENT I/O exampe file works and how it is being made.............

Samura,
After running LabVIEW 5.1 I found in the Search Examples help file a link titled Instrument I/O. Under there I see several examples, one of which contains many attribute nodes. It is difficult for me to tell you pecifically what the purpose of each and every attribute node in this forum.
Generally, attribute nodes in LabVIEW 5.1 are used to set the properties of the front panel controls and indicators. The properties available in an attribute node are very similar to the properties made available by right clicking on a particular front panel control or indicator.
If you have a question about a specific attribute node, I would like to ask you to post in a new thread with a detailed description of the attribute node.
Thank you, and have a great day
Scott
Applications Engineer
National Instruments

Please tell me how to set up GMAIL on IMAP on my E...

Similar Messages

Maybe you are looking for