Please wait. printer preperation occurring. keeps showing on screen
if i hook up with usb i can print but "please wait. printer preperation occurring". keeps showing on screen can anybody help me?
Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
How do I set up my finger print scan it keeps showing me failed try again
how do i fi I set up my finger print scan for my iPhone 5s it keeps showing me failed and I have already updated my device I need help I called apple but before they can do anything for me the call Cuts off saying there's a limited time for the call
Have you tried turning Touch ID off and then back on?
If it continues to fail it is probably a hardware error and you will need to get it serviced. -
"please wait very low battery" keeps after 1 hour charging
I keep getting the folowin message after more than one hour charging " please wait very low battery "
Always connect the iPod to a USB2.0 port at the back of your PC.
Dont connect to low power USB ports, on the fron of the PC, dont use USB Hubs, (may cause Sync problems and coruupt filesytem)
if you are using a Mac, dont connect to the USB port on the keyboard. -
K1 keeping showing "Lenovo screen and Powered by Tegra". Won't go into main screen
Hi,
I just got my K1 2 days. Was working fine but all of a sudden when i try to power on today, it keeps showing me the Lenovo and Powered by Tegra Screen. It won't go into the main screen. I'm very sure i have enough power on the K1. Tried powering off and on many times but still no luck.
Anyone with any advise please? I did not upgrade any firmware or settings. Just installed a couple of children apps. Thanks.Sounds lke your bootloader has become corrupt. With the system off, what happens if you press and hold the power button and volume up buttons at the same time for several seconds? Can't say for sure if this will help.
Thanks,
Ricochet
The K1_Was Just A Broken Promise Lenovo -
i have the 2nd generation ipod touch. i wanna to restore to factory settings but i couldnt do it through itunes. So i went in the settings to rest and delete. it keeps loading the apple screen and the apple turns to a skull and keeps repeating the screen for like 12 hours or more now. how do i fix it?
The skull indicates that the iPod is jailbroken
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
the URL in question has been allowed in Pop-up blocker.
This is a major problem as I am trying to access Contract Notes and it is therefore extremely important that i get a very quick solution to this problem.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Print HTML File Without Showing on Screen
Hi Everyone
Is there a way to print a file (in particular, an html file) from a java app without actually displaying the file on the screen.
ie. print from command line.
I am creating an html file from within java app and would like to print it in one step.
Any help would be greatly appreciated.
Thanks
KellyHi,
Heres some code from an app I wrote that prints out text. I've stripped out little sensitive bits.
// Procedure to perform when print button is pressed
void printButton_actionPerformed(ActionEvent e){
int x, y, pageNo = 1, maxPageHeight, textHeight = 0;
Date today = new Date();
String tempLine = new String("");
String tempString = new String();
Graphics pg;
// Create date and time formats
SimpleDateFormat dateFormatter = new SimpleDateFormat("dd/MM/yy");
SimpleDateFormat timeFormatter = new SimpleDateFormat("HH:mm:ss");
// Create date and time strings
currentDate = dateFormatter.format(today);
currentTime = timeFormatter.format(today);
// Turn off double buffering
RepaintManager.currentManager(this).setDoubleBufferingEnabled(false);
// Get a print job
PrintJob printjob = getToolkit().getPrintJob(this, "<printjob name>", null);
if (printjob != null) {
maxPageHeight = printjob.getPageDimension().height-(rowHeight*2);
pg = printjob.getGraphics();
if (pg != null) {
pg.setColor(Color.black);
pg.setFont(new Font("Courier", 0, 10));
// Print header
textHeight = topOfPage;
pg.drawString("Report Date " + currentDate +
" Time " + currentTime + " Page " + pageNo,
30, textHeight);
textHeight += rowHeight;
pg.drawString("File: " + dataFile , 30, textHeight);
// Print errors
textHeight += rowHeight*2;
pg.drawString("Errors", 30, textHeight);
textHeight += rowHeight;
pg.drawString("------", 30, textHeight);
textHeight += rowHeight;
pg.drawString("col1 col2 col3 Value Reason",
30, textHeight);
textHeight += rowHeight;
pg.drawString("------------ ---- -------------------- ------------ --------------------",
30, textHeight);
if(errorData != null){
for(x = 0; x < errorData.length; x++){
textHeight += rowHeight;
if(textHeight > maxPageHeight){
pg = nextPage(pg, printjob, ++pageNo);
textHeight = topOfPage + rowHeight*2;
tempLine = "";
for(y=0; y<columnLengths.length; y++){
tempString = errorData[x][y] != null ?
roundLength(errorData[x][y].toString(), columnLengths[y])
: roundLength(" ", columnLengths[y]);
tempLine += tempString + " ";
pg.drawString(tempLine, 30, textHeight);
pg.dispose(); // flush page
printjob.end();
}Hope that helps.
Rob. -
IPod keeps showing "reset" screen, won't respond - HELP
This is my problem. I was trying to add songs to my ipod, and unfortunately my computer decided to freeze. I managed to get iTunes shut down, and safely disconnected my iPod, but ever since then it's been on the "reset" (black with the apple logo) screen. I can restart the iPod through all the different ways, it just keeps going back to the reset screen! After a while, the batteries died, so I figured I could hook it back up to the computer and maybe iTunes would recognize it (it wasn't doing so earlier). No dice; it just charged the battery, and went right back to the reset screen.
Now, I've looked through this blasted support site, and haven't found anything thats useful or doesn't lead me back to where I started. If anyone could help me, that'd be amazing. I don't want to have to get this serviced if it's just a software problem.
5th generation ipod? Windows XP
amd something Windows XPI am having the same problem, my ipod worked just 2 days and started rebooting over and over again, I even tried to start the ipod as an external drive but it keep rebooting no matter what I do.
I checked this support page and realized that this seems to be happening a lot.
is there any systemic troubleshooting process to deal with this?
thx -
Iphone 3gs keeps showing apple screen and then shuts off. won't start. HELP.
I left my iphone 3gs in my car to charge, i came back a hour later and the screen said "connect to itunes" and had 100% battery. I unplugged it from the charger and it immeditaly shut off. I plugged it into itunes and it does not even acknowlege it. all it is doing while plugged in is showing the apple screen as if its going to start up but shortly turns back to black screen. i just got my iphone 3g replaced with this one from apple store 3 weeks ago. I need help ASAP.
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to your Local Apple Store is the Next Step... -
Final Cut Keeps Showing Licensing Screen
Every time I start up and Final Cut Studio Application, the licensing screen pops up. I have to repeatedly but in the Licensing information. Is there any way to fix this?
I've already tried to re-install Final Cut Studio, but nothing seems to work... any help would be much appreciated.The fix is described in several posts on this same subject which you would have found had you simply done a search of this forum before posting.
-
Hello,
I just bought a ZEN m300 mp3 player. I first attached it to my computer to charge the battery and some music, succesfully. Then after disattached it from my pc, it is locked with a "please wait..." message on the screen. I tried to turn it off, reset it, reattached to the pc,.... But nothing happened, still locked.
Anybody knows this problem or how to fix it's Thx so much, I m impatient to use it....
ByeSara,
This is what is in the link:
Solution ID: 9589ZEN Style M300/M00 Player is Freezing
Keywords / Key Phrases: player is freezing, hanging, please wait, not responding, unresponsive
Summary:
Applicable To: ZEN Style M300 (DVP-FL007), ZEN Style M00 (DVP-FL008).
Refer to this article if the ZEN Style M300/M00 freezes or whenever the player shows "Please Wait..." message and becomes unresponsi've.
If the player freezes when you access the microSD card, refer to Solution ID 94626: Troubleshooting Micro-SD Card Issues for ZEN Style M300/M100
Perform any of the following troubleshooting steps if the player becomes unresponsive:
Reset the player. Poke the Reset button using a straightened paperclip or a ballpoint pen.<
Perform a Clean up on the player. To perform a Clean up, refer to Solution ID 9373: Accessing the Recovery Mode of ZEN Style M300/M100
Format the internal memory using the player. Formatting the player will erase all files so make sure to perform a back up first. Refer to Solution ID 9373: Accessing the Recovery Mode of ZEN Style M300/M100 for instructions on how to format the player.
Format the player using Windows Explorer. For detailed steps, refer to Solution ID 6774: How to Format ZEN Style M Series using Windows Explorer.Last Updated: July 29, 2011 -
"Please wait, very low battery" display
Hi,
My iPod is displaying the message "please wait, very low battery" on the dark screen with a picture of a battery. I have tried to reset it (holding down menu and select button) but the apple logo comes up (on a very dark screen as well) and then it goes back to the low battery message. I have had it plugged into a USB for 2 hours so I don't see how it could still be very low battery to the point where the screen does not even light up.
Any suggestions?
ThanksIt's likely that the battery is shot and in need of replacement. You can choose to have Apple replace it or a third party repair company at a lower cost.
B-rock -
In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, FranceIan
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes. -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks
Maybe you are looking for
-
Brand new iPod touch won't do anything over WiFi
My iPod touch arrived in the mail this morning and since I charged it up it either a) browses extremely slow in Safari and then quits or b) continues to claim there is no network connection. I currently have it downgraded to WEP and now nothing works
-
How can I make the Finder on my MacBook Pro recognize my iPad as a device?
I need to transfer images from my iPad to my MacBook Pro while preserving "file created" date and time information. Trying to do this using iPhoto has not been working for Vertical *****, since the program auto-rotates the images and marks them as c
-
How to display arraylist list on jsf page
Hii all, i am having an jspx page where i want to display the value coming from a bean class getter.. the getter is returning an Arrarylist of list and i want to display the entire array list on the jspx page when it gets loaded. The method is :- pub
-
The buttons at the right top corner of firefox that are used to close all programs disappeared. What can I do?
-
CDs will boot fine, blank DVDs will mount fine, but when I insert a DVD movie; the drive won't mount and the DVD player will not play my discs. I currently have a Pioneer DVR-109 installed in my PowerPC G5. Any information or help please.