PLM7.02: Status & Release Management/ Status and Action Management

Hello,
                I´d like to know if anybody worked with Status & Release Management. And has some example to how we can customize: SAM (Status and Action Management) in “Define Status Scheme” transaction.
                How it´s works the relationship with: Status: Attributes, Status: Field values, Scheme Definition, Attributes: Definition.
                I´ll appreciated if you could give me a simple example of this functionality.
                Thanks in advance.
                Best Regards from Brazil.
                Rodrigo Arai

Hi Rodrigo,
in a nutshell:
- you can define status network based on objects (w.g. material)
- Define Attributes: you can define attributes like DELETION_ALLOWED or LOCKED_FOR_CHANGE and you can implement preconditions in custom classes when should it happen
- Define Status Field: you can define some fields which are related to the status. e.g. in recipe management RCP_USAGE
- Status: you can define the different statuses (e.g. in process, completed..) with attributes
- Scheme Definition: you can define the logic between statuses. E.g. you would like to swith from status In Process to Completed and from New to In Process. Then switching from New to Completed is not possible for the user.
- Subobject Type Scheme only applied if you have subobjects
here you can find the customizing documentation, there are some examples as well:
Define Status Scheme
Use
In this Customizing activity, you define statuses and status schemes for object types and corresponding attributes.
For each status, you can define which attributes are allowed to be set for an object with this status assigned.
The status scheme defines the initial status and the possible transitions from one status to another.
Activities
You define status schemes as follows:
1. Select the required object type and enter the following:
a) An identifier
b) An object type class (Note: this class should implement the interface class)
c) A subobject type search help
The search help provides a list of all possible subobject types. This feature enhances the usability while  maintaining status schemes at subobject-type level.
d) If the
Status
tab page shall be visible on the PLM Web UI, select the
Status Tab
checkbox
Status and action management is a reusable object. It has been modeled as a dependent object. The prerequisites to enable status and action management for any new objects are:
Add the Status and Action Management tab page on the UI.
Enable the Status Tab checkbox in this Customizing activity.
2. Select the required object type and define the following attributes for it:
a) An object type
b) An attribute identifier
c) An attribute description
d) An attribute type
e) Select a precondition class (Note: This class should implement the '/PLMB/IF_SAM_PRECONDITION' interface)
3. Define the technical status field name.
When you change the object status, the system updates the technical status field names to the new values made in these settings.
4. Select object type and define corresponding statuses.
a) Select the status and define the corresponding object type, an identifier, description, and status icon.
Note:
You cannot define new statuses for materials and material BOMs. For these objects, all values should be transferred from the back-end system.
You can import the status values from the back-end system as follows:
b) Select the object type that represents a material or a MatBOM.
c) Select
Status
in the dialog structure.
d) Choose the
New Entries
pushbutton.
e) Choose the
Import Status
pushbutton.
Note
The system imports the following status values into SAM:
For material: the
X-plant matl status
(cross-plant material status)
For MatBOM: the header status
Although you cannot change the imported value for a material or a MatBOM, you can change its name and description to conform to SAM terminology.
You can differentiate between the following cases for objects whose status values are imported from the back-end system:
The object was not created on the PLM Web UI, but in the back-end system; no SAM status scheme or status was assigned, but a status value was set in the back-end system.
If you assign a SAM status scheme to this object later on that contains the equivalent imported status values, the SAM status value is set accordingly, even if any precondition check results of the SAM status scheme may exist.
The object was created in the back-end system or on the Web UI and a SAM status scheme is assigned to the object on the PLM Web UI.
If the corresponding status value is changed in the back-end system, then existing SAM preconditions for this status transition and allowed status transitions are checked. If the preconditions are not fulfilled, a message is raised and the new status cannot be saved.
5. Specify which attributes are allowed for each object type when the chosen status is set.
a) Select a status and open the
Attributes
screen.
b) Choose an object type.
c) Choose an attribute.
6. Define whether values from other technical fields are affected by setting this status.
a) Select a status and open the
Field Values
screen.
b) Select an object type.
c) Select a technical field name.
7. Specify the status scheme. The status scheme defines the initial status and status transition for the object type. For example, below is a list of standard status schemes defined for iPPE object types.
Assembly Header - PLM_PPEAH
Assembly Item - PLM_PPEAI
Product Item Variant - PLM_PPEPIV
Product Variant - PLM_PPEPV
You can also create schemes for the object type as follows:
a) Specify an identifier and description for the status scheme and set one of the statuses defined above as the initial status.
b) Select the status scheme and open the
Transitions
screen. Enter all possible status transitions by specifying the source (
Status From
) and target status (
Status To
c) Select the
Long Text
checkbox if you want the system to open the long text editor on the
Status
tab in the PLM Web UI. You can use the long text editor to create notes for this transition.
8. Define the scheme at subobject-type level by entering following parameters:
a) Object type
b) Subobject type (You can choose from the list of subobject types you have specified when defining the search help in step 1)
Alternatively, you can define a default status scheme that is automatically displayed on the
Status
tab.
The following statuses are included in the standard delivery:
10 -  In Work
20 - For Approval
LINKED_DIR
LINKED_MAT
LOCKED_FOR_CHANGE
REPLACE_PH_ASSEMBLY (only in the PLM_PPEAI assembly item and the PLM_PPEPIV product item variant)
30 - Released For Planning
LOCKED_FOR_CHANGE
40 - Released
RELEASED
SUB_ITEM_STATUS
The following status transitions are possible:
FROM
TO
Long Text checkbox (dialog box for notes)
10
20
20
30
30
40
20
40
20
10
X
30
10
X
40
10
X
More on SAP help:
Status and Action Management on the Web UI - SAP Library
Best regards
Tamas

Similar Messages

  • User status and action profile in campaign

    Hi All,
    I have a question, may be any one can help me. It is very urgent please reply me.
    I am in Marketing Planner and I have created new user status profile, I want to set that profile to use in campaign. I could not find where can I do customizing ( SPRO) to use my user status profile.
    Is it possible that my campaign can have user status as well as system status?
    Do you also have any idea how to trigger my own workflow on changing user status in campaign?  Any document will be really
    appreciated. Thanks in advance.
    With Best Regards,

    Hi Tauqir,
               In marketting planner application you cant use status profile( user status). Second thing is  you cant even include new system statuses by simply modifying the status object. Because while determining statuses , its almost hard coded.So only way out is
    add your statuses in the BADI they have provided.
    Regards
    Ashis

  • Use of user status and business actions

    Hi all,
    I'm new at status profiles, user status and business actions.
    Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
    After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
    Let's say I've a status profile with following user status with according business actions:
    - status: new;   business action: to progress
    - status: in progress;   business action: to confirm
    - status: confirmed;   business action: decline or close
    - status: closed;   business action: close
    What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
    Regards,
    Christian

    Christian;
    If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
    1. Enter a Status Profile.
    2. Assign the status profile to an Object Type.
    3. Define the User Status.
    4. Assign Business Transactions to user statuses.
    5. Translate the status profile and user statuses.
    You can also to use this function to simulate the status development for a particular object.
    To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
    Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
    You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
    The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
    Status profile info
    Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
    The first block contains the permitted object types.
    The second block contains the user statuses.
    The third block contains the following information for each user status:
    which transactions it allows
    which transactions it allows with a warning
    which transactions it disallows.
    I hope help to you
    Regards
    Luciano Nobrega

  • Modify a dialog screen status and catch an action from it

    Hi all,
    my program makes some write and generate a dialog screen,
    making /system /status i get to know that that dialog is generated by program SAPMSSY0 with status STLI.
    i need to put a BUTTON in that status and that button must be clickable and when i click it i have to visualize another screen!
    how can i add a button in an automatic generated dialog and how can i intercept the action of clicking that button?
    thank you very much,
    Giacomo
    Edited by: Giacomo Cipriani on Feb 11, 2009 12:43 PM

    any advice?

  • Virtual Connect Manager Status and Stacking Link Error

    I have three C7000 Enclosures / chassis running on each environment, each chassis have a redundant VC (Flex-10 Enet) bay 1-2 and ( 8Gb 24-Port FC ) Bay3-4, everything seem working but there is a Domain status and stacking link errors "One or more of a domain's subsystems are not properly operating, causing serious impact to domain functions." and "Some VC-Enet modules are not properly connected via stacking links please verify stacking cable connections"

    Sorry, but your question is far beyond the intended scope of the Global Consumer support forum.  I suggest posting this to the HP Enterprise business forum.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Update the x plant material status and plant speific material status

    HI Experts,
    I am new to abap. In my requriment i want to update the status of x-plant material status (MSTAE) in MARA  and
    plant specific material status (MMSTA) in MARC. In master data the status of those fields is blank. Insted of balnk i have to upload '01' or '02'.
    using BAPI_MATERIAL_SAVEDATA  i am unable to upload. its not working.
    is there any another way to upload that two plants status.
    thanks in advance
    sravan

    Hi martin,
    i think insted of it_*** (internal table) we have to use work area. please make sure conform this one.
    i am giving my logic wat i have written and my requirement also...
    The process to update material master data status is described in 'xxxxx' Mark and Release Cost Estimates and BAPu201D.
    u2022     As a result of releasing a standard cost, certain master data elements need to be updated by the Cost accountant in order to enable further activities within SAP.
    u2022     All material codes for which Cost Accounting has released a new standard cost, need to have their Material Status indicators changed from 02 (reviewed) to 03 (released).  This removes the system blocks on certain activities within SAP like purchasing, production and Sales.  The status will be needed to change in two views of the Material Master. 
    u2022     The u201CX-plant matl statusu201D field on the Basic Data 1 view
    u2022     The u201CPlant-sp. matl statusu201C field on the Costing 1 view
    This update should be automated
    Select materials for which a price change document was posted based on selection parameters.
    Select price change documents for company code defined in selection screen since last run date
    u2022     Reference procedure = PRCHG (MLHD-AWTYP)
    u2022     Entered on MLHD-CPUDT u2013 verify against last run date to include in selection
    u2022     Entered at MLHD-CPUTM u2013 verify against last run date to include in selection
    u2022     Store last run date and time by company code, so that it can be picked up in the next run. (store in table TVARVC?)
    Select only the documents of plants which belong to the company code in table MLIT. The link between company code and plant can be found in table T001K.
    u2022     Valuation area = Plant MLIT-BWKEY
    u2022     Create a list of all materials MLIT-MATNR
    The next 2 updates should happen independently;
    u2022     Update the u201CPlant-sp. matl statusu201C field (MARC-MMSTA) on all plant views belonging to the company on the Costing 1 view to status 3 with as prerequisite;
    u2022     The current plant material status is 02
    u2022     This action must be done on all plants belonging to the company code
    u2022     Update the u201CX-plant matl statusu201D field (MARA-MSTAE) on the Basic Data 1 view to status 3 with as prerequisite;
    u2022     The current X-plant material status is 02.
    in pt_final1 i get the data corresponing to given tables.
    LOOP AT PT_FINAL1 INTO GS_FINAL1.
    *HEADER DATA
      GS_HEAD-MATERIAL = GS_FINAL1-MATNR.
      GS_HEAD-IND_SECTOR = GS_FINAL1-MBRSH.
      GS_HEAD-MATL_TYPE = GS_FINAL1-MTART.
      GS_HEAD-BASIC_VIEW = 'X'.
      GS_HEAD-COST_VIEW = 'X'.
    APPEND GS_FINAL1 TO IT_FINAL1.
    *CLIENTDATA
      GS_CLNT-PUR_STATUS = GS_FINAL1-MSTAE.
      GS_CLNTX-PUR_STATUS = 'X'.
    *PLANT DATA
      GS_PLNT-PLANT      = GS_FINAL1-WERKS.
      GS_PLNT-PUR_STATUS = GS_FINAL1-MMSTA.
      GS_PLNTX-PUR_STATUS = 'X'.
      CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
        EXPORTING
          HEADDATA    = GS_HEAD
          CLIENTDATA  = GS_CLNT
          CLIENTDATAX = GS_CLNTX
          PLANTDATA   = GS_PLNT
          PLANTDATAX  = GS_PLNTX
        IMPORTING
          RETURN      = GS_RET.
        Commit to release the locks
       RETURN-TYPE is 'E' in case of error, else 'S'.
      IF GS_RET-TYPE = 'E'.
        LOOP AT IT_RET.
          WRITE: / RETURNMES-MESSAGE.
        ENDLOOP.
      ELSEIF GS_RET-TYPE = 'S'..
        WRITE: / 'PLANT MATERIAL STATUS '.
      ENDIF.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ENDLOOP.

  • How to create a new employment status in action info type 0000?

    Hi All,
    how do we add  new employment status in action info type 0000?
    As we all know right now we have Active, Inactive, Retire, Withdrawn.....reguirement with my client is to add a new on onleave.
    Can you someone please help me on this?
    Thanks Much!
    Raj

    Hi
    Create a new action - called "OnLeave (with Pay) " use the status - Active and if required create another action OnLeave (Without pay) with inactive status.
    Its not required to create new status.If required you explore the STAT3 or STAT1. Recommended to use the standard employement status - STAT2 or max you can go for STAT3.
    As per best practice, I recommend you to create another action called - Reporting back from Leave.
    >SAP Customizing Implementation Guide
    >>Personnel Management
    >>>Personnel Administration
    >>>>Customizing Procedures
    >>>>>Actions
    >>>>>>Define infogroups
    >>>>>>Set up personnel actions
    >>>>>>Create reasons for personnel actions
    >>>>>>Change action menu
    Maintain right usergroup/reference.
    Thanks,
    Amosha
    Edited by: Amosha on May 21, 2009 2:17 AM

  • User status and System status for Trade Promotion

    Hi all!
    CRM 7.0 Web UI Trade Promotion Management.
    I have a trade promotion with custom status already assigned and visible from WEB UI, Is it possible assigning to such TP also a standard status picked amongst TP system status?
    Take into account that in the as is configuration we find in the same TP drop down list user status and system status.
    2 questions:
    1.     How can I hide the system status?
    2.     It is possible to group together user status and system status? E.g. User status: fundrequest, inplanning, submitted...+ released (system status).

    Hi Virginia Zitun,
    Can you tell me how did you manage to solve the issue.
    rgds,
    Venkat

  • Set PF-STATUS and use SY-UCOMM in an Exit FM

    Hi,
    I am working on an Exit function, and I am trying to read the screen status and then the user's actions, so that I could code for the SY-UCOMM. For some reason, my program is not working. Is it possible to add the PF-STATUS and SY-UCOMM to the Exit function to process the user's actions? Please advise.
    Thanks,
    RT

    Hi Ravikumar,
    I was able to use the parameters in the Exit provided in the Exit FM to process the necessary data. I have other requirements where I would have to code in the Exit FM to detect the user's actions and process them within the Exit to manipulate the tables. I added some code specified in the previous post, but it doesn't seem to get the OK_CODE; therefore, no processing of the data was happening when I tested by clicking on the yellow arrow to exit. I am able to determine the OK_CODE though.
    Would you have any sample code suggestions when using the Exit for SET PF-STATUS and SY-UCOMM?
    Thanks so much.
    RT

  • How to reset the response status and response header

    Dear Masters
    Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
    Regards
    Ramesh

    Hi,
    I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
    http://dev2dev.bea.com/pub/a/2005/05/decorators.html
    http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
    http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
    Cheers,
    vidyut

  • Unable to Create Website using "Create Web Site" action component in Release Management

    Hi Team,
    I am trying to use Release Management to Deploy my Website along with DB in staging servers.
    I have set-up 2 Staging Servers SIT & UAT Both 2012 Servers with IIS 8.5 Configured.
    Defined Release Path and Release template.
    Deployment Sequence is something like this : 
    Deployment Sequence - Server Name - Create Folder - XCopy - Create Website - Configure Website
    Build is successful, drops the output to Output folder and RM gets initiated with it's work.
    It creates folders as mentioned in the "Create Folder" activity.
    It copies the whole content from _PublishedWebsites to the mentioned location.
    It gets stuck with the "Create Website" step.
    Initially I have provided details as follows : 
    AppPoolName
    IsPreloadEnabled
    IsAutoStart
    SiteName FabrikamSIT
    PortNumber 80
    PhysicalPath c:\FabrikamRM\WebSite\SIT 
    Later, I tried providing 
    AppPoolName DefaultAppPool
    IsPreloadEnabled 1
    IsAutoStart 1
    SiteName FabrikamSIT
    PortNumber 80
    PhysicalPath c:\FabrikamRM\WebSite\SIT 
    Then also no luck.
    Deployment gets rejected and the error that you can see when you hover the mouse is : 
    Task failed with the exit code -2146232576".
    No much info available with this eror code in net also.
    Any help in getting this simple site created is highly appreciated.
    Thanking you in advance,
    Regards,
    TFS Queries

    Hi,
    For the deployment sequence, you might need add the action of "create application pool" before creating a website.
    Another method is check whether the build output can be deployed manually. If yes, then you can trobleshoot the problem in your deployment sequence and parameters. You can create the website manually and deploy your build output to the website. If you have
    any other concerns about the deployment, you can also open a new thread in IIS forum for a better response.
    If the issue persists, please elaborate more details about your scenario with sceenshots.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How best we can use the Rollback and RollbackAlways mechanism in Visual Studio Release Management Template

    Hello All,
    We need a clarification on Rollback and RollbackAlways in Release template.
    We checked a scenario for Rollback and RollbackAlways:
    In Release Template, we have the first activity as “Configure Application Pool” and then followed by a rollback action of “Create Application Pool”
    and “Create Web Site” then followed by "Code Deployment" via TFS build.
    We tested with 2 scenario’s:
    With App Pool and Web Site already existing: when triggered the build, configure
    app pool succeeded, then Rollback action was skipped (as previous action was successful), finally deploy the code executed (code deployed) and build got succeeded.
    Deleted App Pool and Web Site: when triggered the build, configure app pool failed (as no app pool existed), Rollback action executed (as previous action failed) – created app pool and web site then finally
    deploy the code executed (code deployed)
    But build failed (Error: Configure app pool action failed).
    Ideally the build should succeed as the roll back action got executed and code deployed successfully.
    Please correct us if our understanding is wrong.
    Also, Kindly let us know how best we can use the Rollback and RollbackAlways mechanism in Release Management
    Looking forward for your positive response.
    Thanks in advance.
    Regards,

    Hi Shashank,
    Rollback Always runs if any of the actions in the template failed. Rollback will run if action just above rollback fails or if any of the actions below the Rollback fails.
    Article here (http://www.incyclesoftware.com/2014/03/understanding-rollbacks-release-management/) clearly explains how Rollback and Rollback
    Always work.
    I think you come across this issue since you are using build to do the "code deployment" action. You should use the release template to do that. 
    As far as I know you cannot use Rollback to achieve condition check (App pool exist in your case) action.
    For this you can create your own Power Shell component (which checks if the app pool exist and is not create it) and add it as a tool in RM server (RM Server Inventory).
    Another option is you can follow the workaround in below thread "Answer" quoted below. That is execute Remove app pool regardless if it exist or not (which does not fail) and then create app pool.
    I was able to get it working by removing the app pool which does not fail if it doesn't exist. Removing then creating seems the long way around but it works.
    Flow:
    Remove Application Pool
    Create Application Pool
    https://social.msdn.microsoft.com/Forums/en-US/43bf21c8-e233-4e58-a5a8-2592b78bc466/vs-2013-release-management-create-application-pool-fails-if-it-already-exists?forum=tfsbuild
    Cheers!
    Chaminda

  • Displaying Jobs Status and Logs without using SM37

    Hello All,
    First of all, thanks a lot for your time.
    We're being asked by the Audit Team to remove tcode SM37 from our Job Roles. Although I agree with them that users should not have "change" or broad display access for the tcode, some of them need to check other user's Jobs status, as well as their Job Logs (which I have managed to restrict using auth. object S_BTCH_JOB).
    My question is: do you know if there's any alternative way or a transaction different than SM37 to display other user's Jobs status and Job Logs?
    We're providing SMX for user's own jobs, but I have not been able to find an alternative way than using a restricted version of SM37 for displaying other people's Jobs status and Job Logs.
    Best regards,
    CMPT

    You can either create your own monitor locally ( see transaction RZ20) or develop it on your own (see FM BP_JOB_STATUS_GET).
    If you want to use SM37 then you can add SHOW to S_BTCH_JOB but this might be problematic in combination with RELE (of their own jobs).
    [SAP Note 568963|https://service.sap.com/sap/support/notes/568963] will be able to help you further.
    Cheers,
    Julius

  • Antimalware Overall Status and History - Report

    Good morning,
    I have setup a subscription to the default report in SCCM named "Antimalware Overall Status and History". When the report is sent out it sends a nice pie chart with categories underneath it. The categories are the following :-
    - Protected
    - At Risk
    - Not yet Installed
    - Client Not Supported
    - Inactive
    - Configuration Manager Client Not Installed
    The report works great and it adds all of our clients in to the correct category. However my question is - How does SCCM determine which category clients are added to. Are there certain requirements that a client must meet before it is added to the "Protected"
    category.
    Also is it possible to edit the settings for these categories?
    Regards,

    Hi,
    Since it is related to SCCM, I recommend you to ask in the forum below for professional assistance:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagergeneral
    I am really sorry that I moved it to this forum by mistake. Sorry for the inconvenience.
    Best regards,
    Susie

  • Slow imac, how to check status and clean up disc?

    slow imac, how to check status and clean up disc?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • Issue fetching workitem recipients

    I am trying get a list of recipients for a work item (task is of type general task) using the FM SAP_WAPI_WORKITEM_RECIPIENTS. The user to which this workitem id forwarded to has a position maintained in an organizational structure as well. Now, the

  • Connect webdynpro callable object with ms sql server 2000

    Hi all how connect webdynpro callable object with ms sql server 2000? How can I register on the portal as an additional connection? thank you very much!

  • Acknowledgements using Business Systems

    Hi: I am a XI developer, and I am dealing with a interface: SAP-(idoc)->  XI - (file)---->legacy I wanna have an acknowledgement from XI to SAP when the idoc have arrived to XI. My interface has Business Systems, we dont wanna Business services or BP

  • 2 users, same computer..how do we share ical?

    So there's 2 users on our computer and we want to share ical and both be able to add, change, delete...How can we do this???

  • Call submit request form

    Hi, In my custom controller, I want to call the submit request form, and pass a specific request id in order to open a XML Publisher report I created. I am using the following code: com.sun.java.util.collections.HashMap parameters = new HashMap(); St