Pls help+how 2 extend warranty online 4 my iphone in india

pls help+how 2 extend warranty online 4 my iphone in india

If you area able to purchase Apple Care, then you could extend it one additional year, but you could not extend it 2 years. Check with Apple for your location to see if Apple Care can be purchased in your location. You would have had to purchase the device new from Apple or an authorized Apple reseller.

Similar Messages

  • My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

    My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Pls help - How can I add a typekit font to muse?

    As Muse doesn't come with all typekit fonts already included in the dropdown list of webfonts, I'd like to know how I can add a typekit font to the dropdown menu so I can use it for my website. I have Adobe creative cloud membership.
    I've searched the whole of the web and can't find anything about this at all - only about adding one of the existing muse typekit fonts which I already know how to do.
    Why doesn't Adobe include all typekit fonts with Muse when you're already a full creative cloud subscriber?

    Done!
    Date: Thu, 20 Dec 2012 03:13:17 -0700
    From: [email protected]
    To: [email protected]
    Subject: Pls help - How can I add a typekit font to muse?
        Re: Pls help - How can I add a typekit font to muse?
        created by morgan_in_london in Help with using Adobe Muse - View the full discussion
    You're very welcome - can I be cheeky and ask for a "correct answer" to be noted? :^D
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4935814#4935814
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4935814#4935814
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4935814#4935814. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My calender is in unknown language pls help how to change back to normal language?

    my calender is in unknown language pls help how to change back to normal language?

    I do not know this tool can you be specific, just curious.
    T the Op the easiest way of reseting your preferences is the hold the command option shift keys down as Illustrator launches you have to click on the Illustrator icon and quickly hold these keys down.
    Oh yes on the PCit is control alt shift.

  • HT4623 I cannot see sw update button in general section,pls help how to update iOS in my iPad 2

    Hi I want to upgrade my iOS to 5 in my ipad2 but I cannot see nay upgrade button in the setting section.pls help how to upgrade my iOS now

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 you can only update to iOS 7 (that is the only version that you can update to) via your computer's iTunes, as described half-way down the page that you posted from. You will need the current version of iTunes on your computer : http://www.apple.com/itunes/download/
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    If you do update you can't then uninstall it

  • How to extend warranty of ipad mini

    HOw to extend warranty of ipad

    You may want to consider if it's worth the cost.  If your iPad has been working reliably through your original AppleCare period then there is little reason to expect that it has any defects that will cause it to fail any time soon.  As long as you are not exposing it to harsh conditions and are taking care of it then it will likely continue to work for years.

  • Hi, since i updated my iphone5 to 7.1 version,i found the battery easy run out,pls help how to back to 7.0.2 version,thanks

    since i updated my iphone5 to 7.1 version,i found the battery easy run out,pls help how to back to 7.0.2 version,thanks

    Downgrading of iOS is not supported by Apple.
    However, See these steps for troubleshooting battery or charging issues.

  • HT201359 Why i have been billed six times for the same item? Pls help how to refund..

    Why i have been billed six times for the same item? Pls help how to refund..

    Did you change your card details on your account a number of times when trying to purchase the item, and five of them are temporary store holding charges : http://support.apple.com/kb/HT3702 ?
    If they are all 'proper' charges then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hi want to upgrade my software to 7.1.1 pls help how i have do it

    hi want to upgrade my software to 7.1.1 pls help how to do it

    The following has instructions on how to update: http://support.apple.com/kb/ht4623

  • Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite ph

    Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
    & IMEI is : *****
    Br-----------------------
    Fazlur
    <Personal Information Edited By Host>

    It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
    If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
    You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

  • Pls help   how to check the condition in java server faces.....???

    Hi All
    I have strucked with code pls help....
    How can i check the codition in java server faces.....?
    like in my Application when user provides the in put like some state name in the next page i have to display some url for that state .......if he provide some other state name it will be different url .....pls help me how can i do that,,,,,,???
    thanks in advance..

    There are certainly ways to do that. E.g. using the rendered attribute, using conditional statements in EL, using a specialized getter for that (lazily loaded if necessary), etcetera. But your functional requirement is unclear, so I can't go in detail with that.
    In the future, please try to write normal English sentences. Don't write like SMS talk and save the periods and commas. The more effort you put in your question, the more chance you will be taken for serious and the more effort others will post in their answers.
    Also, in the future, JSF related questions should be posted in the JSF forum.
    Edited by: BalusC on 12-aug-2008 7:47

  • HT1766 please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...we found the backed up data in the pc(windows 7)after entering %appdata%..pls help how to restore..thanks!God

    please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...iwe found the backed up data in the pc(windows 7)after entering %appdata%..pls help on how to restore...we will appreciate it very much....thanks! God bless!

    The iPod backup that iTunes makes does not include synced media like app, music and videos. Thus, you wll have to resync those back to your iPod.
    If necessary you can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an ipad3 in India, I am unable to make purchases in AppStore as I am unable to change country details in credit card . Pls help how to do that?

    Pls help I am unable to purchase from AppStore for ipad3 in India. I am unable to change country details in the credit card info while purchasing.

    If you still have problem, you can contact iTune Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Pls. help - How to use user defined URL?

    The page users access currently for login is (only over the Intranet)- http://servername/pls/portal30/url/page/pagename
    I need users to be able to point to - http://project.companyname.com/project
    and be taken to the above Login page.
    What needs to be setup (Apache/Portal)??
    I created a Virtual Hosts entry in the httpd.conf file -
    NameVirtualHost 13.xx.xx.xxx
    <VirtualHost 13.xx.xx.xxx>
    ServerName project.companyname.com
    </VirtualHost>
    That did not help. What am I missing?
    Thanks.

    ATP,
    Pls. refer Portal FAQ. Here is how it works
    Use the Apache Redirect directive in the <ORACLE_HOME>/Apache/Apache/conf/httpd.conf file. For example, if your site's full URL is http://mysite.us.oracle.com:80/pls/portal30, you can place the following directive in httpd.conf:
    Redirect /portalhome http://mysite.us.oracle.com:80/pls/portal30
    Then, if you try:
    http://mysite.us.oracle.com/portalhome
    you will be redirected to the original URL. This technique will also work with any valid path that is appended to the URL. For example:
    http://mysite.us.oracle.com/portalhome/url/folder/ONLINE_HELP
    will redirect the user to the Online Help content area.
    null

  • Pls help : How To select fields and data from user_table for each tablename

    Please help with the query to generate a output which selects the code,meaning,inuse for each table in the user_table that has "CODED" as a part of table name.
    User table has some 800 table that contains CODED in the tablename.
    Desc of the table:
    DESCPTION:
    Name Null? Type
    SHORT_NAME NOT NULL VARCHAR2(20)
    CODE NOT NULL VARCHAR2(4)
    MEANING NOT NULL VARCHAR2(240)
    IN_USE VARCHAR2(1)
    NOTES VARCHAR2(2000
    UNITS NOT NULL VARCHAR2(1)
    AMOUNT NOT NULL VARCHAR2(3)
    CONVERTED VARCHAR2(1)
    RUN_NAME VARCHAR2(30)
    But all the table have code, meaning,in_use fields.
    O/P format :
    TABLE_NAME CODE MEANING IN_USE
    Help me pls.

    Not 100% sure what you want. If you want to see all the tables that have all three of those columns, then you could do something like:
    SELECT table_name, 'CODE', 'MEANING', 'IN_USE'
    FROM user_tab_columns
    WHERE column_name = 'CODE' and
          table_name like '%CODED%'
    INTERSECT
    SELECT table_name, 'CODE', 'MEANING', 'IN_USE'
    FROM user_tab_columns
    WHERE column_name = 'MEANING' and
          table_name like '%CODED%'
    INTERSECT
    SELECT table_name, 'CODE', 'MEANING', 'IN_USE'
    FROM user_tab_columns
    WHERE column_name = 'INUSE' and
          table_name like '%CODED%'If you want to select those three columns from each of the tables, then you could do something like this.
    Create a command file called, for example, makesel.sql that looks like:
    SET PAGES 0 lines 500 trimspool on feedback off;
    spool sel.sql;
    prompt spool selout.txt;
    SELECT 'SELECT '''||table_name||''', code, meaning, in_use FROM '||
           table_name||';'
    FROM (SELECT table_name
          FROM user_tab_columns
          WHERE column_name = 'CODE' and
                table_name like '%CODED%'
          INTERSECT
          SELECT table_name
          FROM user_tab_columns
          WHERE column_name = 'MEANING' and
                table_name like '%CODED%'
          INTERSECT
          SELECT table_name
          FROM user_tab_columns
          WHERE column_name = 'INUSE' and
                table_name like '%CODED%')
    prompt 'spool off;'
    spool off;
    @sel.sqlAt the sqlplus prompt run the file using @makesel.sql. This will create another file called sel.sql containing the commands to select those three columns from each table that has all three columns, then after the new file is created, it runs the file (@sel.sql). The output will be spooled to a file called selout.txt.
    HTH
    John

Maybe you are looking for