Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..
pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..
Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L
Similar Messages
-
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
Iphone 4s stuck in recovery mode and Itunes wont recognize
So i was restoring my Iphone 4s and when it went into recovery mode Itunes stoped recognizing it. So i tired going and trying to find the apple mobile device driver but it isnt in the universal bus drivers section. So i plugged in my iphone and it showed up under other as "Iphone (recovery mode)" with a yellow exclamation point. I tried to update automatically and manually but both of them say access denied. I have no means of communication without my phone so can someone please guide me through this??
Hello Arya F,
Thanks for using Apple Support Communities.
First, follow the steps below to get your iPhone to be recognized in iTunes, and then restore it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H. -
Help, my iphone is in recovery mode, and itunes shows error code 1
help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982] 0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982] 5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982] 7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982] 8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater: BEGIN: Preparing first stage
[23:05:36.0982] bbupdater: Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 5...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 4...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 3...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 2...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log -
Iphone 4 stuck in recovery mode and itunes doesnt recognize device
IPhone 4 Is stuck in recovery mode. But when I plug in to my computer, iTunes doesn't recognize any device connected.
I was having some issues with it, then decided to update, that's when it locked down,Hello, MA80.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you receive a specific error code when you attempt to restore, try the steps in the article below.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H. -
My 1stgen ipod stopped working stuck in recovery mode and itunes wont read it
okay so i finally charged my ipod 1st generation it was dead for years and now it works fine i tried to download software that can update it too atlest 5.01 or higher but it kept sayin i failed to put it in DFU mode (idk what that is) but i tried to put it in that a couple time .till the last time it just got stuck when i turn it on the apple symbol comes up then its the "connect to itnues' and that happens over and over again and now itunes wont even read it and then when it did connect it said it couldnt be restored , soo help!
Se:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and maybe here:
iOS: Device not recognized in iTunes for Windows
Note , the 1G iPod can only go as high as iOS 3.1.3 -
Ipod Touch 3G is stuck in recovery mode, but Itunes wont recognize it.
Hey,
yesterday evening, I updated to iTunes 10 and then after that updated my Ipod touch to the latest OS 4.0.2. somewhere along the way during my ipod updating, the cord got pulled out of my PC and I quickly plugged it back in. but it said there was an error during the installation and now my ipod is stuck in recovery (shows the logo and then the itunes and usb screen. it is recognized by my pc just fine, but says its in recovery mode. yet my itunes will not recognize that it is plugged in at all. So I can't even try and fix the problem via itunes. there seems to be nothing to do. Any help would be great.
Thanks.I am having the same problem. I think it has something with iTunes and not just the PC.
-
My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me
I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
Thanks,
Nathan. -
I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7
Try the iTunes troubleshooting advice here:
Windows - http://support.apple.com/kb/ts1538 -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
Help,my phone is in recovery mode and iTunes shows error 17
help,my phone is in recovery mode and iTunes shows error 17
http://lmgtfy.com/?q=iPhone+error+code+17
-
i downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.
now my iphone has a blank screen for a couple seconds the loading screen appears then apple re appears.
A REPEATING CYCLE now i have No PHONE!!!! Help ME PLEASEEEEEEEEEEEEEETry it...
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
i´ve done it and worked 100%
Good lucky -
My Iphone is stuck in recovery mode and Itunes won't help !
My Iphone 4s is stuck in recovery mode and i tried to connect it to itunes but it would start to restore it then stop and something would pop up saying error what do I do ?
What are the exact words of the error message?
-
Iphone stuck in Recovery mode and Windows says it cannot find drivers
My phone is stuck in recovery mode and XP is saying that it cannot find iphone. The drive driver menu shows a big yellow quesiton mark for two Apple Mobile Device (Recovery Mode). This all happned during the ios4 update. I tried to manually point the system to the Apple folder but it could not find a driver. Now my iphone is stuck recovery mode. Help.
Message was edited by: BAGOMI GOT THE SOLUTION!!
This problem happens due a conflict between the Samsung's Software "NEW PC STUDIO" and the Apple Drivers!
The solution is unistall all Samsung's Software and removing all Apple Softwares as well (like iTunes, device drivers etc)
Then cleaning the Windows Register with some software like CCleaner AND manually using REGEDIT, just find for Samsung (carefully with other Samsung Devices like HardDrive. You musn't remove something like that) then, finding for New PC Studio.
Remove all Keys related Samsung New PC Studio.
Restart your PC and reinstall iTunes lastest version.
Now, you can put your iPhone in Recovery Mode that Windows will recognize it! -
Ipod stuck in recovery mode and isn't recognize by computer...Help!
After the latest update my daughters ipod went into recovery mode...was getting ready to do the full factory reset and had an error....found that I needed to update itunes..did that and now my computer won't recognize her ipod at all! Her ipod is currently stuck in recovery mode and she is in tears. Someone please help.
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/
Maybe you are looking for
-
I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?
-
Is my Stor.E alu2 USB HDD covered by warranty?
Good morning all, I was wondering whether somebody can confirm whether my StorE Alu2 external USB Hard Drive has a warranty period? I have had it for just over a month and it has stopped working. It was dropped once, not heavily though, and has a tin
-
Materials do not have a Target cost collector value/credit for the Final pr
Hi, while running the sap report kkbc_pko, the materials do not have a target cost collector value . please guide me how to add the value to the material cost collector regards yogesh
-
Evaluation copy message on 3d graph
Hi, I am using a 3d graph in one of my programs. It works fine on one computer. When I transferred the entire code to another computer and opened it up, the 3d graph displays the message "Evaluation Copy" on it. What should I do now? Thanks.
-
May have overlooked it, but is there anyway to have a lightbox open on page load rather than just on a trigger? Thanks for any help!