Pls help! USB Storage Devices does not work for K7N2 Delta-L

hi all,
    I am pulling my hair out trying to resolve this issue.
    Everytime i plug in a USB Storage Device/Thumb Drive(eg Creative NOMAD), my system gives an error saying task cannot be performed due to a I/O device error.
    Yet, the USB ports work well with other USB devices like mouse, keyboard, USB sound cards, printers and so forth??!!
     I am using WinXP SP1 and have installed the patch that comes on the CD driver. Pls help me out if you know the answer. ...
Thanks!
Les

I'm pretty much going to confirm the same going with compatibility issues here...there is still alot of hardware out there on the market that is incompatible with many other types of hardware...
We've reached the day when alot of us like to think that ALL manufacturer devices should work flawlessly with everyone else's devices on the market. This just isn't the case and I don't ever see this being the case. Ideally it would be nice but the fact is is that no company can "cover all the bases" in this respect. There are literally hundreds of thousands of hardware mfg's out there now and this cannot be a reality unless the PC world goes Apple. Same standards for all period. No fluctuation or ability to expand on new ideas without going to the "Standard Setting Company" directly for full testing capability.
Regardless of that fact, I'm kinda surprised that you can't get this device to work on your rig. Have you tried a fresh install of XP? Have you tried using a PCI USB device to see if the MB ports are bad? Could be that the MB has a problem that doesn't show until you use that device...many things to try here to troubleshoot your problem.
Bonz 8)

Similar Messages

  • Even genuine iphone 5 usb charging cable does not work for an year?

    I have bought an iphone 5 last year. With it, came the  original apple genuine iphone 5 lightning USB cable. It did not last for half year. I had to buy another original apple iphone 5 similar cable and it was gone within 3 months. I dont understand is it cable manufacturing problem? is apply selling fake cables? It is really annoying and I am really angry that such a reputed company cant give/ provide proper long lasting cables.
    My experience with these two genuine cables was that after some months of  usage, i used to observe even if its plugged it would not charge, or if you push it hard its charging. Firstly, I never keep my phone charging all time. Then how the hack can the charging cable die? or problem arise. I bought the phone and the charging cables when I was germany. I had to buy a 20 euro local companys USB charging cable after above two stopped working with no signs of damage. I have also tried cleaning the charging jack or socket where cable is inserted. It did not help. This local charging cable started to torn out automatically and it got fully damaged, Now I am in India, I bought another cable of 10 euros and it is just two days, it would not charge again.
    I am really furious now whether you use original or local USB cables they dont last for even a week? what the ****?
    Do I need to really pay for those portable charger with a big price tag, that my problem will be solved? very very upset. I never have any complaint with the phone, but the charging catastrophies, really ****** me off. I think of going back to other mobile brands like samsung or nokia where there is never a charging issue or battery drainage issue once you charge its goes for days or it  is also expensive buy a nokia or samsung charger if lose it or break it. but for iphones its really bugging situation and not just me many people around the world are having sick problem with iphone brand with charging ISSUES.
    APPLE PLEASE SORT THE PROBLEM OR SELL the PORTABLE IPHONE CHARGERS (WIRELESS) CHEAPER so that we dont have to use these silly little lightning cables. or I fear my APPLE I PHONE 5 is not genuine or its FAKE.
    PLEASE HELP>

    Look closely at the way you handle the cables. I have never had any cable, Apple or third-party, fail on me.

  • Help My serial number does not work for installation.

    What can I do? After installing Yosemite.- tried to re-install CS5 from disk - product serial number is not recognized.

    Also, I found this link, but not until after Acrobat XI repaced Acrobat X: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  • USB audio device is not working (code 10)

    USB audio device is not working (code 10)

    dominichristine wrote:
    USB audio device is not working (code 10)
    where do you get this error code? do you see this when you plug in
    a USB device or does it show up with out anything plugged in?

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
    Mylenium

  • TRIM does not work for SSD in a RAID configuration

    According to Intel, SSDs that are used in a RAID configuration cannot use the TRIM function in Windows 7. This would seem to lead to an eventual degradation of those RAID SSD configurations. Is there any work ongoing to enable TRIM in the future?
    "....Intel later clarified that TRIM was supported for the BIOS settings of AHCI mode and RAID mode, but not if the drive was part of a RAID volume.[16]..."
    W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
    W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0
    Solved!
    Go to Solution.

    The performance hit would only be on the write side of the equation. If the garbage collection of these SSD drives is sufficient, I wonder why TRIM exists? I'm posting an excerpt from Wikipedia on the subject below:
    "All SSDs have garbage collection. That is a function of NAND flash memory used in SSDs. Some drives may be more efficient at GC than others. Some do not recover as well as others after they have been used for a period of time. Some drives perform GC in the background when the drive is otherwise not busy with user data (idle), but there are some drawbacks to that background operation (you can see the wikipedia article for more details). In general background GC is not good for the endurance of the drive because it moves data that the OS (and user) may delete and render unnecessary to GC in the first place. The best solution is to do it on the fly as fast as possible.
    TRIM is a command sent by the OS to the drive identifying the actual logical block addresses (LBAs) that are no longer needed. To understand TRIM you must understand how the OS and SSD tracks the data. When you put an item in the OS trash you are not actually deleting the items. They are just marked ready for deletion. If the user says to empty the trash, the OS notes this and now says those LBAs are free to accept new data. This is true for all storage devices, not just SSDs. Many people do not realize that the storage device does not actually delete the data at that point. The act of erasing a file is simply the OS marking its internal lookup tables for that file as free to store new information. An HDD still has the data on the drive at that location until the OS writes something new into that spot. For an SSD it is the same; the SSD still has the data in the flash at that location until the OS writes something new into that spot. Of course the NAND flash memory requires the replacement data to be written into a new location and the old data is marked as "invalid" now. Then during garbage collection that invalid data is NOT moved with other valid data in that block to a new block.
    The performance of an SSD is at its peak when it is brand new out of the box because there is nothing to GC. Unfortunately this occurs only at the beginning of the drive's life or after you secure erase the drive and start over. Performance is also affected by the size of the over provisioning (OP) (details also in the wikipedia article above). During GC if the drive does not have to move around as much data it can operate faster. The TRIM command enables the OS to tell the SSD what LBAs are no longer valid data. Without the TRIM command this only happens when the OS tries to write something new into that same spot or it tries to replace the current data. If the SSD knew in advance that some of the LBAs holding data were invalid the drive would not move that data during GC. The effect gets you closer to the performance of a drive with larger OP. Without the TRIM command the drive will perform like it is at full capacity at all times and only has the amount of OP set at the factory (plus any space left unused during the partition process when first setting up the drive)."
    W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
    W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

  • HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

  • GUI_DOWNLOAD does not work for background printing

    Hi,
    Need some help urgently.
    Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
    We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
    Kindly suggest.
    Best Regards,
    Abbasi

    you can not use gui_download in background.
    Try searching first, this thing has been posted a thousand times already

  • ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

    ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
    On right click nothing happens at all. I have  reinstall the ODI multiple times with right installer. issue persist.
    Please help.

    Hi,
    Did you use the generic installer or the win32 one ? You should use the former with Win64.
    You can also check that your version of Java is supported in the certification matrix.
    Regards,
    JeromeFr

  • SM36/37: Specification "After Job" does not work for Daily "periodcity"

    I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
    Here's the deal:
    1.  I have two jobs: "A" and "B".
    2.  "A" runs Daily.
    3.  I set-up job "B" to run "After job" "A" in my SM36 definition.
    Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
    Further info:
    1.  We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
    2.  I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday.  After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
    3.  I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
    4.  One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs.  I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run.  (At this point, it's becoming a matter of principal!)
    Here's my question:
    Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
    Thanks in advance,
    Lara

    Please close this thread since you posted the same question here:
    [SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

  • ITunes does not work for Asia ( Hong Kong )

    I just purchased my first iPod Nano ( 2nd Generation) was was told by store staff all I have to do is register and download apple itunes software and then I could download MP3 songs from iTunes...paying for songs of course.
    I was shocked to learn that iTunes does not work for Hong Kong residents, nor does napster,yahoo music unlimited, etc.
    I am a Canadian living in Hong Kong, so can not read write or understand chinese, does anyone know of a English subscibtion mp3 download service that works for Hong Kong, and not emusic, tried that one, not for me .
    Please Help !
    BullDogHK

    Do you still have a Canadian credit card and Canadian billing address? If so, you should still be able to use the Canadian store.

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Maybe you are looking for