Pls help with photoshop int. art

Hi
I am doing some wall prints for a friend.
Using Photoshop cs3
I need to make some pieces of art that will be 13 ft across and 4 ft up.
How do I get strted?
I know the images have to be 300 dpi to be printed and will be printed with a prof. printing press and I am using stock images.
Do i start by editing the artboard or canvas
to the size of the print job?
Also, I am trying to recreate a night background used in the movie 300 in the particular scene with the oracle grl..
Any help is much appreciated
Thanks

I’d estimate You could even drop the resolution to 150dpi, so that in the final output You still get (a bit above) 72dpi.
Of course if Your printer decidedly requests differently his opinion is more important than mine, but when editing- and saving-times get unbearable one has to make cut-backs one way or the other anyway.
My policy on stock images usually is to take them as big as they come, especially if there’s any chance that one might choose to use only a small picture detail.
Combining the images would be a good opportunity to make use of Smart Objects for non-destructive resizing and filtering, but that also increases file-size and could slow You down.
Regarding the movie-image:
I’d recommend either using a stock-image of clouds or snap some shots Yourself and combine those, because the basic filters probably won’t get You that good a result, edit the contrast and brightness with a Curves-Adjustment Layer and colorize that (with a Solid Fill-layer set to Blend Mode Color for example of a Hue/Saturation-Adjustment Layer set to Colorize).
For the curling smoke a stock foto might also be better than faking it in Photoshop (though with Filter – Liquify applied on some soft strokes or gradients one might get OK results).
For combining such elements it may be convenient to completely desaturate them and make the backgrounds (the blue of the sky or the background behind the smoke) totally black, because that allows to more easily stack them on a new background with their Blend Modes set to Screen if they don’t overlap a lot (see attached file).

Similar Messages

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

  • Need help with photoshop to find TGA

    Need help with photoshop to find TGA on same as because I cant find it there or is it a download you need to get it. And its for photoshop element 12.

    Yeah, I thought it was dumb to remove it, too. See:
    Save as TGA File ? [Photoshop Elements 12]
    for the workaround.

  • Help with photoshop quitting and AMD graphics

    help with photoshop quitting and AMD graphics
    im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

    Hi Chris
    I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
    i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
    its frustrating as i am paying for CC but cant use it!

  • HT201299 HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

    HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

    My Ipad doesnt have the space to pin out the sim card tray...?
    I think i have been gifted the Ipad which doesnt support sim card. Is it so?
    My model no is- A1416....?

  • Pls Help with this

    Hi,
    I need a help to resolve my problem.Actually i have a JSP page with a list box. When i select some value in the list box, appropriate values must list out according to the selected value.And i have a submit button to process that jsp page.
    I wrote a validation as all the fields must be entered to submit a page.
    But when i tried with the following code,it's just moving to processing page when i select a values from the list box.This is happening when i cheked the validation.
    Pls help with this code.This is very urgent.
    Code is as follows
    "Example1.jsp"
    <%
    String str1 = request.getParameter("Modem");
    %>
    <html>
    <head>
    <script language = "JavaScript">
    function Validate()
    if(document.UpdateFiosAccounts.Modem.value == "Select One")
    alert("Please select the value")
    document.UpdateFiosAccounts.Modem.focus()
    return false
    if(document.UpdateFiosAccounts.text1.value == "")
    alert("Please type some text")
    document.UpdateFiosAccounts.text1.focus()
    return false
    return true
    </script>
    </head>
    <body>
    <form name = "UpdateFiosAccounts" action="./Example1.jsp" method ="post" onSubmit= "return Validate()">
    Pls select One:<select name="Modem" size="1" onChange="document.UpdateFiosAccounts.submit()">
    <%
    if(str1 == null)
    %>
         <option value="Select One">Select One</option>
         <option value="One">One</option>
         <option value="Two">Two</option>
         <option value="Three">Three</option>
         <option value="Four">Four</option>
    <%
    else
    %>
         <option value="<%=str1%>"><%=str1%></option>
    <%
    %>
    </select><br>
    Pls type something: <input type ="text" name="text1">
    <input type ="submit" value="submit" onClick="document.UpdateFiosAccounts.action='./Accounts.jsp'">
    </form>
    </body>
    </html>

    Hi! The reason is that in the onChange property you are doing the submit, so, when you select something, it goes automatically and never pases through your validation function. So, remove that onChange. Next, the button is a submit buton, so, no matter what your validation does, the page will go. You need to change the submit type of the button to just button (<input type="button" onclick="function to validate">) and then you will get what you want. By the way, this is NOT a Java question, is more JavaScript question.
    Hope this helps.

  • Pls help with a program

    I'm making a quiz, and i store the questions in a textfile. The user can choose from 3 quizes, either Plate Tectonics, Rivers or Rocks. I managed to call the questions from Java. Each quiz has a set of 10 questions. In the code below i only included the answers to the Plate Tectonics Quiz, which i stored in an array. What i'm having problem with is, that its not working correctly, since it is displaying, after answering all the questions correctly that i have answered 0 questions from 1 question. First of all it should say out of 10 questions because i have 10 questions, and its not really working because even if i answer them all corrctly it still says 0 out of 1 question. Can someone pls help me find the error? Thanks a lot.
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    import java.io.*;
    import java.util.Scanner;
    import java.util.Arrays;
    public class GeographyQuiz extends JFrame implements ActionListener {
      private static final int FRAME_WIDTH = 140;
      private static final int FRAME_HEIGHT = 160;
      private static final int FRAME_X_ORIGIN = 70;
      private static final int FRAME_Y_ORIGIN = 50;
       AnswerStore answerStore = new AnswerStore();
      public static void main (String[] args) {
        JFrame jFrame;
        jFrame = new JFrame();
        JOptionPane.showMessageDialog(jFrame, "This is a Geography Quiz");
        JOptionPane.showMessageDialog(null, "Good Luck");
        char choice;
        int i, choice1, Password;
        String yourChoice, passString;
        passString = JOptionPane.showInputDialog("Enter the Password");
        //Password = passString.nextInt();
        Password = Integer.parseInt(passString);
        if (Password == 123) {
         JOptionPane.showMessageDialog(null, "Valid. You typed the right password. Now choose from the following menu");
         GeographyQuiz frame = new GeographyQuiz();
          frame.setVisible(true);
        } else {
          JOptionPane.showMessageDialog(null, "Invalid Password. Try Again");
      public GeographyQuiz() {
        Container contentPane;
        JButton button1, button2, button3, button4, button5;
        setSize (FRAME_WIDTH, FRAME_HEIGHT);
        setTitle("Geography Quiz");
        setLocation(FRAME_X_ORIGIN, FRAME_Y_ORIGIN);
        contentPane = getContentPane();
        contentPane.setBackground(Color.pink);
        contentPane.setLayout(new FlowLayout());
        button1 = new JButton("Plate Tectonics");
        button2 = new JButton("Rivers");
        button3 = new JButton("Rocks");
        button4 = new JButton("Quit");
        contentPane.add(button1);
        contentPane.add(button2);
        contentPane.add(button3);
        contentPane.add(button4);
        button1.addActionListener(this);
        button1.setActionCommand("b1");
        button2.addActionListener(this);
        button2.setActionCommand("b2");
        button3.addActionListener(this);
        button3.setActionCommand("b3");
        button4.addActionListener(this);
        button4.setActionCommand("b4");
        setDefaultCloseOperation(EXIT_ON_CLOSE);
       public void actionPerformed(ActionEvent e) {
    String ac = e.getActionCommand();
            String[] questions = null;
             try {
            if (ac.equals("b1")) {
                questions = readFile("plate_tectonics.txt");
            } else if(ac.equals("b2")) {
                questions = readFile("rivers.txt");
            } else if(ac.equals("b3")) {
                questions = readFile("rocks.txt");
            } else if (ac.equals("b4")) {
                System.exit(0);
            askQuestions(questions);
         catch (java.io.FileNotFoundException f)
            JOptionPane.showMessageDialog(null, "File not found.");
        private String[] readFile(String path)throws FileNotFoundException {
            Scanner s = null;
            StringBuilder sb = new StringBuilder();
            String separator = "\n";
            try {
                s = new Scanner(new BufferedReader(new FileReader(path)));
                s.useDelimiter(",\\s*");
                while (s.hasNext()) {
                   JOptionPane.showInputDialog(null,s.nextLine());
            finally {
                if (s != null)
                    s.close();
            return sb.toString().split("\\s");
        private void askQuestions(String[] questions) {
            int count = 0;
            for(int j = 10; j < questions.length; j++) {
                 String input = JOptionPane.showInputDialog(null, questions[j]);
                 // Use reference to AnswerStore instance to access data in it.
                 if(answerStore.answer[j].equals(input))
                 count++;
            JOptionPane.showMessageDialog(null, "You answered " + count +
                                          " out of " + questions.length +
                                          " questions correctly.");
    class AnswerStore  {
    String[] answer = {
            "Hellenic", "constructive", "100km", "Italy", "Wegner",
            "constructive", "100km", "Italy", "destroyed", "Meditteranean"
    }Edited by: saytri on Dec 23, 2007 2:07 AM
    Edited by: saytri on Dec 23, 2007 2:29 AM

    stripped to bare bones, it works OK for me
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    class GeographyQuiz extends JFrame implements ActionListener {
      AnswerStore answerStore = new AnswerStore();
      public static void main (String[] args) {
        JOptionPane.showMessageDialog(null, "This is a Geography Quiz\n\nGood Luck");
        char choice;
        int i, choice1, Password;
        String yourChoice;
        GeographyQuiz frame = new GeographyQuiz();
        frame.setVisible(true);
      public GeographyQuiz() {
        Container contentPane;
        JButton button1;
        setSize (140, 160);
        setTitle("Geography Quiz");
        setLocationRelativeTo(null);
        contentPane = getContentPane();
        contentPane.setBackground(Color.pink);
        contentPane.setLayout(new FlowLayout());
        button1 = new JButton("Plate Tectonics");
        contentPane.add(button1);
        button1.addActionListener(this);
        button1.setActionCommand("b1");
        setDefaultCloseOperation(EXIT_ON_CLOSE);
      public void actionPerformed(ActionEvent e) {
        String ac = e.getActionCommand();
        String[] questions = null;
        if (ac.equals("b1")) {
          questions = new String[]{"what is 1+1","what is 2+2"};
          askQuestions(questions);
      private void askQuestions(String[] questions) {
          int count = 0;
          for(int j = 0; j < questions.length; j++) {
            String input = JOptionPane.showInputDialog(null, questions[j]);
            if(answerStore.answer[j].equals(input)) count++;
          JOptionPane.showMessageDialog(null, "You answered " + count +
                                        " out of " + questions.length +
                                        " questions correctly.");
    class AnswerStore  {
    String[] answer = {"2", "4"};
    }either the problem is in the file, or the posted code is not what you're using

  • Help with Photoshop Elements 9 Organizer

    I need some help with my new Photoshop Elements 9 Organizer.
    I have not had previous versions of Photoshop, this was a brand new installation.  I had previously used Kodak software which came with my camera to organize and edit pictures.
    My PC is approximately 6 years old.  I have a 2.2 ghz processor and 1.5 GB of RAM.  I am running Windows XP Home Edition, Version 2002, Service Pack 3.
    The software seemed to install just fine.  I then imported some pictures from my Kodak folders into the Photoshop Organizer.  After importing pictures I then received the following error message:
    'Elements 9 Organizer has encountered a problem and needs to close.  We are sorry for the inconvenience.'
    If I remove the pictures from the catalog, I no longer get the error message.  As soon as I import any pictures, however, I get the error and the software closes.  When I reopen the organizer I get the same error after after about 15 seconds
    I have tried the following:
    uninstalled an re-installed twice
    turned off the automatic backup to photoshop.com
    I did come across thread 769749 (http://forums.adobe.com/thread/769749) that offered some advice.  Based on that, I optimized my catalog (which was empty), repaired my catalog (which was empty).  I also created a new catalog and removed the existing (empty) catalog.
    All of these efforts have not worked.  Each time I try something, as soon as I import any pictures into the catalog, I get 'Elements 9 Organizer has encountered a problem and needs to close.  We are sorry for the inconvenience.'
    This is brand new software that I am unable to use.
    Adobe, please help.

    Answers to following queries would help-
    * Are you able to import images into Organizer from folder other than your Kodak folders?
    * Is your problem happening for importing from a specific set of folders only?
    * Is your problematic folder having any video files in it which you are importing into Organizer?

  • How do I open HELP with Photoshop Elements12?

    Hi, I haven't used PSE in awhile and recently bought PSE release 12 so I went through looked at the Users manual, view the Online videos and wanted to check on HELP and the dropdown menu Photoshop Elements HELP (PF1) but nothing happened. I did this is in all three modes (Quick, Guided and Expert) but "help" did not appear so my question is, how do I open HELP with PSE12?
    Thanks,
    Bob
    P.S.- my objective (what I was looking for) were the step by step instructions on how to straighten a photo

    To automatically straighten the image and leave the canvas around the image, choose Image >> Rotate >> Straighten Image.
    The straightened image contains areas of blank background, but no pixels are clipped.
    To automatically straighten and crop the image, choose Image >> Rotate >> Straighten And Crop Image.
    The straightened image does not contain areas of blank background, but some pixels are clipped.
    If you have a photo with an horizon you can drag a line along it with the straighten tool.
    Click Help on the top menu bar for the on-line help files.

  • Someone please help with Photoshop CS5 opening error

    Everytime I try to open Photoshop CS5 on my Macbook Pro, it starts to load and then right after it says "Initializing panels..." it stops loading and an error message error pops up and says "Could not initialzie Photoshop because of a program error." I'm not sure at all what I did to cause this. I have Premire CS5 and After Effects CS5 also installed and those load and work perfectly fine. Photoshop just stopped working all of a sudden. Photoshop is running in 64 bit mode but i also tried to run it in 32 bit mode and that did not work either.
    Thank you for anyone that helps.
    Here are all my specs:
    - Macbook Pro
    - Mac OS X 10.5.8
    - 8 GB RAM
    - ~6 GB left of space on my harddrive
    - Photoshop CS5 Version 12.0

    xstatic606 wrote:
    …- ~6 GB left of space on my harddriveæ
    That is pathetic little disk space available. 
    Keep in mind that the OS must share that itty bitty space with Photoshop's Scratch Disk.  As a point of reference, I keep a modest, dedicated 160-GB dedicated second internal drive for my Photoshop Scratch Disk alone.
    xstatic606 wrote:
    …Photoshop CS5 Version 12.0
    You should be running Photoshop 12.0.2.
    Wo Tai Lao Le
    我太老了

  • I wanted to start a Digital Printing business please help with Photoshop

    Hi I wanted to start a digital printing business please help me with photoshop.
    I've never used the program before and dont know how to design either. I got the trial edition of the photoshop extended and do I need to take some form of lessons or how do I start learning photo shop to do things like Banners, posters, signage, digital printing in other words...

    Before you invest any money in a startup business you MUST make sure you are able to compete with the competition. What you are saying is a bit like - I want to start a bakery but I cant cook and don't know how to use an oven - this might sound negative but try imagine the taste of the cakes....
    If you really want to enter into the market your best bet would be to hire a designer/someone who knows about printing/profiling etc as printing can be complex, especially when you bump into technical problems.....You can always learn along side him/her. I don't want to put you off so GO FOR IT!!, but it is tough out there at the moment.

  • Help with Photoshop Elements, I'm new to it?

    So I'm just fiddling around with Photoshop Elements, and I have a picture of a crocodile that I'm trying to turn blue, so I'm using the Smart Brush and Blue Sky effect to change his skin colour.
    Firstly, is there an easier way to change the colour of something that I'm missing?
    Secondly, how do I control the Smart Brush precisely? The thing is his body is about the same colour as the water so when the brush gets to a certain point the entire image turns blue.
    So how do I select the crocodile but not the water?
    Thirdly, the brush. I can draw with the brush, but then I get the "wait" symbol and my changes vanish. How do I stop this?
    Thanks for replies, and I'm sorry for my noobishness, I just got Photoshop Elements yesterday.

    You can make the brush cursor larger & smaller with the bracket keys next to the letter p on the keyboard. This affords more control in making the selection.
    Use of the Smart brush tool is probably the easiest way to colorize an object. The tool has a buit-in mask. If you look on the Layers palette (Window>tick layer), the black and white rectangle represents the mask.
    Left click on the mask, then access the brush tool (the ordinary brush B) and with a black brush paint over the area where the blue spilled over to the water. If you go too far, paint with a white brush to correct.

  • Help with Photoshop 2.0.0.16271

    Hi, I have a really old copy of Photoshop (v2.0.0.16271).  I just bought a new computer and would like to migrate Photoshop over to it.  Can I do that?  If so, how?

    pherley wrote:
    Ah, Adobe Photoshop Album 2.0 is what I'm running on my old machine.
    The new machine will run Win 8.1…
    Good grief!    I seem to remember that was an old freebie given away with some scanners and digital cameras.  In any event it has nothing to do with Photoshop now.
    I doubt very much you can get it to work in any modern OS on any computer platform.

  • Pls help with extracting dates

    I wish to produce the output in table customer1 based on the customer table DOP field.
    The values in DOP (0030500) indicates wed and fri, (0000007) indicates sunday.
    how can i extract all the dates for wed and fri (0030500) between the period ST_DT and ED_DT (23/02/2005) to (20/03/2005).
    SQL> select * from customer;
    CUSTOMER_ID ST_DT ED_DT DOP
    429100 23/02/2005 20/03/2005 0030500
    428950 14/03/2005 02/04/2005 0000007
    SQL> select * from customer1;
    CUSTOMER_ID ST_DT ED_DT DOP DT
    429100 23/02/2005 20/03/2005 0030500 23/02/2005
    429100 23/02/2005 20/03/2005 0030500 25/02/2005
    429100 23/02/2005 20/03/2005 0030500 02/03/2005
    429100 23/02/2005 20/03/2005 0030500 04/03/2005
    429100 23/02/2005 20/03/2005 0030500 09/03/2005
    429100 23/02/2005 20/03/2005 0030500 11/03/2005
    429100 23/02/2005 20/03/2005 0030500 16/03/2005
    429100 23/02/2005 20/03/2005 0030500 18/03/2005
    428950 14/03/2005 02/04/2005 0000007 20/03/2005
    428950 14/03/2005 02/04/2005 0000007 27/03/2005
    pls help, thanks.

    SQL> select * from customer;
    CUSTOMER_ID ST_DT     END_DT    DOP
         429100 23-FEB-05 20-MAR-05 0030500
         428950 14-MAR-05 02-APR-05 0000007
    SQL> select a.customer_id,a.st_dt,a.end_dt,a.dop,a.st_dt+b.tita
      2  from customer a,(select rownum-1 tita from user_objects) b
      3  where a.st_dt+b.tita <= a.end_dt
      4  and instr(a.dop,decode(to_char(a.st_dt+b.tita,'d')-1,0,7,to_char(a.st_dt+b.tita,'d')-1))>0
      5  order by a.customer_id,a.st_dt+b.tita;
    CUSTOMER_ID ST_DT     END_DT    DOP     A.ST_DT+B
         428950 14-MAR-05 02-APR-05 0000007 20-MAR-05
         428950 14-MAR-05 02-APR-05 0000007 27-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 23-FEB-05
         429100 23-FEB-05 20-MAR-05 0030500 25-FEB-05
         429100 23-FEB-05 20-MAR-05 0030500 02-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 04-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 09-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 11-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 16-MAR-05
         429100 23-FEB-05 20-MAR-05 0030500 18-MAR-05
    10 rows selected.
    SQL> Assuming the date range does not exceed the number of user objects :-)

  • Help with printing CD art

    Mods: If there's a better place to post this, I apologize, but I couldn't find a specific place.
    Technical Specs -
    Macbook Pro -
    Mac OSX 10.6.4
    2.4 GHz Intel Core i5
    4 GB 1067 MHz DDR3
    Printer -
    Epson RX595 All-In-One Photo Printer
    Here's my problem -
    I create cd artwork for my dad's post-production company. It's the same artwork, but he used to use Epson PrintCD ( he's not very computer savvy, so it was the simplest program for him ). However, now that I am here, I started creating his cd artwork in Photoshop. I downloaded a template off the Internet, and it worked fine! ...for a while.
    I tend to make minor tweaks and adjustments to the artwork, since I don't usually have a whole lot to do most days, and I ( stupidly ) don't save multiple copies of things while I'm working on them.
    The dilemma is this: I had a great cd artwork, but I can no longer remember how I made it. The new stuff that I'm coming up with is incredibly blurry and horrible looking compared to the amazing quality of the others.
    I've scanned in three of the hard copies that I have on hand ( two GOOD versions that I have hard copies of, and one BAD version that's the latest creation ).
    Good CD 1
    Good CD 2
    Bad CD 1
    ( I didn't want to post big pictures in the post, so just links to Photobucket pictures )
    What I'm hoping is that someone can help me out with some feedback on a setting that might help me get back to what the artwork once was.
    Thanks guys!
    -Robby

    Wade_Zimmerman wrote:
    Was the image 300 ppi at 100% the size it is being reproduced at! That is; is area of the art covering the background about 4.625 inches square by 300ppi or was it scaled to fit?
    Resampling is when you scale up the resolution with interpolation  or change the dimensions of the image but keep the same resolution. That is you can res up or down not always a good idea and many times does little for you and can cause lots of problems.
    Ah, I think I understand.
    I believe so, yes. What I am doing is opening a basic template in PS, then opening my background image, and just dragging and dropping. It's not a perfect fit on the cd, but I'm not doing any resizing of it. It's maybe a few centimeters bigger than the furthest edges of the cd circle.

Maybe you are looking for

  • More help with Skillbuilders' Modal Page Plugin

    I have an employee page with a series of smaller report regions showing things like contact addresses, job roles, etc. All are form-on-a-table+report type of setup I would like to convert to modal pages. The popup is now working (thanks to a security

  • IMac G5 - hang on start-up with roaring fans

    Hi all Problem occured after trying to instal CD that came with WD-external hard disk 250Gb. My friends iMac G5 will not cont when starting-up after showing the Apple. • Showing Apple and moving it slightly down with a jump (less than 1cm) • No rotat

  • CS4 Resizing in InDesign to odd %'s

    Since I need to resize 4 ads into 27 mostly different sizes ... is there something like there was Resize It (if that is the right name) for Quark ... only for InDesign? So that things size correctly without having to go in and tweek photos and re-mov

  • Problem with inserting into table that has autogenerated primary key

    hi i am working on EJB3. i am trying to insert object into table.Primary key of table will be generated automatically.I tried following statement for insertion, em.persistent(customerObj); but it throw following exception, javax.ejb.EJBException: jav

  • Not able to Update the Infotype thro'HCM Process and Forms

    Hi, I have done the form and ran the test run in ECC, after completion of execution its not updating the form scenario infotype. Herewith mentioned the trace data .. C Function Trace Record Date : 27.08.2010 Time : 17:26:30 : 539,203 Work Process : 0