Plug in tools (cut on crosshair)

Is there a plug in tool that does the same as Esko PackEdge cut on crosshair tool?

Doing a Google search might yield better results.

Similar Messages

  • Plug-In icon cut off under Tools/Plug-In

    Using Reader X or Acrobat X my plug-in is cut off if I've left Tools/Plug-Ins expanded where I can see my icons and then leave Reader/Acrobat (exit/ X) and open another document (links from our page).  If I shrink Plug-ins down before leaving, this does not happen.
    Anybody else run into this and is there a solution?  I've tried every Preference I can find and it doesn't change that behavior.
    Cliff

    Hi, my friend
    What's the process of your researching? Any solution to solve the issue of ICON was cut-off in Tools pane? I got same issue now. My plug-in cannot be shown correctly in Tools pane. I don't know how to deal with this issue. Any guide to me?
    Thanks very much.

  • How to install the widget development plug-in Tool -URGENT

    Hi I am new to the widget development.
    I have already installed the NWDS7.0 SP9 , doing the development for the webdynpro and protal .
    To work on widgets i have found the pulgins in the following url in the zip format.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/100ad59a-7b6b-2a10-8ab5-e6078fa8e5b8
    SAP Widget Development Tools - zip file.zip file when i unzipp this file i have got the following dirctory structure.
    SAP Widget Development Tools - zip file (dir)
    |---- features (dir)
    |---- plugin (dir)
    |---- site.xml
    When i copied these whole directory in my IDE installed plugin directory
    C:Program FilesSAPIDEIDE70eclipseplugins
    then i restarted the  my IDE . But i have nt find any prospective or plugin enable with respect to widget.
    I have went through the widget development guide (SAP Enterprise widget development guide.pdf). There it is explained that download the eclipse3.3.1 and then extract the eclipse.
    so it is really confusing how to proceed.
    My question is , will it be possible to installed the plugins with the installed NWDS by copy the plug-in tool (when i doo that it is not working, because when we extract it is giving 3 directory's seperatly "features, plugin, site.xml". do we need to copy this way to IDE plugin directory.) If i done this it is not workng?
    or
    Do i need to install the Eclipse seperately to install this widget development plugin.
    Please help me to setup the eclipse development setup.
    Regards
    Vijay

    Hi JaiDeep
    Thanks for the valid reply
    Finally i have decided to install the CE7.1 SP 3 version.
    But which version of jdk is supported by SP3 is not given at the site.
    Do u have any idea, if i install the CE7.1 SP3. and then can i install the SAP widget Foundation  also along with that.
    This tool requireds
    JAVA 1.6
    SUCUDE  PSE management install
    In the SAP Widget foundation guide has given the steps for the installation.
    But the url it has given will be going open in the SAP networkonly.
    http://nvpal168.pal.sap.corp:1080/wfws/foundationWS.jnlp
    What is difference in  SAP Widget Foundation Installation and SAP Widget Foundation as a Standalone Application ?
    How i need to proceed for the SAP Widget Foundation installation?
    where do we get the SUCUDE PSE management install?
    whether  the CE7.1 sp3 supports the java1.6 version?
    Regards
    Vijay
    Edited by: Vijay Krishna Meda on Jan 23, 2008 6:55 PM

  • Does anyone know plug in for cutting a vinyl in Illustrator CS4, Free?

    Does anyone know plug in for cutting a vinyl in Illustrator CS4, Free?

    Does anyone know plug in for cutting a vinyl in Illustrator CS4, Free?

  • Front earphone plug does not cut out speakers or plays any sound

    I have an HP Pavilion Media Center TV m7480n Desktop Pc. I upgraded to Windows 7 32.  After install the front earphone plug no longer cuts out the speakers or plays any sound.  I updated all the Realtek drivers.  In Realtek HD Audio manager the green and pink front plugs are light color.  I tried both the advanced settings to play back devices.  Neither work.  I had the front plug and the headphones checked out and both are functioning.  I have been using the rear plug for my headphones and switch plugs with my speakers when I need them.  I miss my front plug.  Any Ideas?

    Hi CanadaDry,
    You probably just need to update either your audio driver or your chipset directly from the component manufacturer. I'd start with the audio driver first if everything else on your PC is working after the upgrade. But if there are other things not quite right like USB ports not working, then I would install the chipset driver update too.
    Your PC has a Realtek Audio Device, so here is a link to the Realtek downloads:
    http://www.realtek.com.tw/downloads/
    Select "High Definition Audio Codecs", accept the agreement, and then download and install the Win 7 32bit driver.
    If that doesn't work, here is a link to the Intel 945P Chipset driver for Win 7:
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19607&lang=eng&OSVersion=Windows%207%...
    I hope this helps. Let us know how it goes.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • Is there a plug in for cutting vinyl

    Does anyone cut vinyl from illustrator directly?  Trying to figure out if I can do that.

    yes, this should work with illustrator and corel draw. you will have to
    play with it
    but, you will probably have to save it as an illustrator 8 file. so vinyl
    express will import it in, again you will have to play with this, and to my
    knowledge there is
    no plug in for this software. Have a great day and good luck with this
    On Wed, Oct 22, 2014 at 5:15 PM, mayodesigns <[email protected]>

  • BUG: Premiere CC Curve Tool cuts off luma at 100% ?

    The Color Curve Tool from Premiere CC cuts off luminance to 100% video level. That is a problem if the input videos have so-called "super-whites" in it.
    This would include for example the Canon C100, C300, C500 because the video levels from this cameras defaults to more then 100% video-level.
    The Curve Tool was definetly not clipping at 100% in Premiere CS6!
    Please consider this as a bug that has to be fixed soon, because it changes colors all older projects which includes material from this popular cameras.
    BTW - Speedgrade CC (also previous versions) also did not handle Super-Whites correctly and clips it even at import! This does not seemed to be fixed in SG CC.
    Thanks,
    Patrick.

    Hi Patrick,
    Yes, we know about that one. Feel free to file a bug report: http://www.adobe.com/go/wish
    More info here: http://www.creativeimpatience.com/warning-about-using-rgb-and-luma-curves-in-premiere-pro- cc/
    Thanks,
    Kevin

  • How to best change shoulder shape with pen tool: cut graphic in half and reflect?

    Hi,
    I'm working with a .eps file of a mannequin. I need to make the shoulders more square and more rounded to show variations on body type. I'm not an illustrator whiz, but I thought that it would be best to slice the graphic down the middle, alter one shoulder, and then reflect it so that they are even. But how do I do cut it in half?
    I've been playing with the convert anchor point tool to change the should shape and while it works, it's very hard for me to replicate the exact same effect on the opposite side. I've uploaded the file so that you can see what I'm talking about. If anyone could suggest the best route, I would very much appreciate it. Thanks!

    For the scissors, you need to insert extra anchor points at the cutting point.
    It is not necessary to insert an anchorPoint before cutting a segment with the Scissor.
    Also, assuming we're talking about closed or filled path(s) here:
    1. Knife Tool.
    2. Press and hold Alt.
    3. Drag the Knife all the way across the Path(s). Add Shift to constrain to vertical/horizontal/45 diagonal angles.
    If the paths are open and unfilled, the Knife tool is useless. It also does not abide by SmartGuides. (Illustrator has three cutting tools and they are all pathetic.)
    JET

  • When I access AOL on Firefox a "plug in tool bar" appears on the right side of my screen obliterating my scroll bar. How do I get rid of this annoying plug in bar?

    AOL says it's your browser that is causing this, not AOL and it makes AOL pretty useless to use on Firefox. Much easier to use Windows Explorer. Can you get rid of this "browse or add plug in" bar? How do I get around this? Using Firefox on a Windows Vista operating system.

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • New EOS Plug-in fcp7 cutting clips.

    I have noticed when importing footage using the new EOS pluging for fcp, that it randomly cuts the length of your clips, a 3 min clip was cut to 25 seconds. Why is this happening? it does it randomly, Now youhave to check all your clips for Duration.
    Any ideas?
    Footage is 5d mk ii 25p > fcp 7

    I've seen a similar issue before caused by a high speed but poor quality card reader.
    Wasn't using the EOS plugin but seeing as you haven't had any other bites...

  • Link Plug in Tool

    We currently use ISIToolBox(Image Solutions) to do our linking, and bookmarks in Acro 8/9.  We need to upgrade our production systems to Windows 7. ISIToolBox is not compatible with Windows 7, they say they MAY have an upgrade in 2Q 2011, which doesn't work for us. Plus the cost to upgrade is the same as purchasing the product.
    So we are looking for a replacement for ISIToolBox.  Do you have any suggestions as to what works with Acrobat?
    Thanks!!

    if you are talking about archiving or moving a project you can use the project manager tool.
    Adobe Premiere Pro Help | Copy, transcode, or archive projects
    if you are wanting to do proxy editing, there is no built in function. you would have to transcode proxy files and do a folder swap or use the offline/relink tool.
    Adobe Premiere Pro Help | Relinking offline media

  • Bottom of CS5 tools cut off?

    Hi forums folks,
    can anyone help me figure out why some of my students (a couple of the ones using Mac) are finding that the bottom of their toolboxes are being chopped off? The toolbox ends somewhere near the top of the Quick Mask icon. It does this regardless of whether the toolbox is one row or two, docked or floating. The Quick Mask still works, but you have to click on the sliver of it that is still showing.
    Can anyone explain?

    Well, it might not come to that...one of the students who was having a problem crashed and lo and behold, upon restart all was well again.
    The other one restarted voluntarily and Photoshop also is no longer acting up. Guess it was just "one of those things"!

  • Final Cut 7 crashes when loading plug ins!

    how to manage which plug ins final cut pro 7 loads when launching software ?

    You can use PlugIn Manager, part of Digital Rebellion's Pro Maintenance Tools.
    There is a free trial download:
    http://www.digitalrebellion.com/promaintenance/
    or see if this article helps:
    http://www.larryjordan.biz/technique-how-to-remove-unwanted-plug-ins-from-final- cut-pro/
    MtD

  • How to Lock the Plug in Add on Tools in Adobe X?

    Hello,
    I have a folder level javascript with a tool button installed on users hard drives.
    Those with Adobe Reader 8 and 9 shows the add on tool button automatically.
    Those with Adobe Reader X have to use the steps as follows to show the plug in tools
    show tools pane
    extended features
    Plug in add on Tools
    The user has to follow all of the above steps each time a document is opened to click on the tool button.
    This can become time consuming when many documents need to use the tool button consecutively.
    Is there a way to lock the tool button so the user just has to click the tool button when a document is opened in Reader X?
    Any assistance will be most appreciated.
    Thank you

    In response to a question about finding the internal name of a custom button (such as one added using a folder-level JavaScript):
    The app.addToolButton() method for Acrobat 9 and earlier uses the cName parameter to define the internal name of the tool and posts it to a special "Add-on" toolbar, for example:
    app.addToolButton({
      cName: "myToolButton",
      cExec: "app.alert('Someone pressed me!')",
      cTooltext: "Push Me!",
      cLabel: "My Button",
      cEnable: true,
      nPos: 0
    In Acrobat X this function will create a new pane in the Tools Panel called "Plug-in Add-on Tools" if it's not already present, and post the button there rather than on the system toolbar or Quick Tools area; but the internal name of the resulting button used by the registry preferences will have the prefix "_legacy:". In this example, if you create a button using the above script and are referring to the button in the Acrobat X registry keys to pre-populate the button into the Quick Tools area, you should use the name
    _legacy:myToolButton
    However the button itself still has the internal name "myToolButton", so if you try to create it a second time, the script will fail because the name "myToolButton" is no longer unique. Don't use the "_legacy:" prefix in your button-creation script.
    Note that in Acrobat X 10.0 you cannot use the app.removeToolButton() method to remove any buttons from anywhere (the toolbars or the Panes), nor can you use the app.listToolbarButtons() function to return an array of all the objects; as the API has no direct connection to the toolbars or Panes. When a script tries to create a new button the Acrobat X API diverts the function call to the Tools Pane, but it's strictly a one-way conversation.

  • Link Tool - Hyperlink too long - Adobe cutting it short - web page not launching

    Hi,
    I have been trying to add a hyperlink by using the Link Tool. But when I paste the Hyperlink into the available section the link tool cuts the final elements of the hyperlink. When you therefore click on the hyperlink the web page you want is not displayed correctly.
    Is there a way to increase the number of characters in the link tool to accomodate web sites that are longer that the standard norm?
    Thanks,
    Colum

    There is no link tool in Adobe Reader.

Maybe you are looking for