Plug Ins for logic 8

hi guys..i got a question..i am currently running lp7.2 but am about to upgrade..i got lots of virtual instrument plug ins that work on 10.4.4...my question is when i upgrade into leopard and lp 8..will these instruments work?..and the second question is if i stayed in 10.4.9 and upgrade would these plug ins work?..thank u in advance..one last question advance accoustic system has a virtual guitar strumming and picking program has anyone used it and will it work too?

Leopard: I am afraid you would have to check with the makers of those VI's.
Almost all of them have Leopard versions, some of them are both tiger and leopard compatible.
If you upgrade to Tiger .11, everyhing should keep working just fine. No reinstalls necessary - I say this with 98.3 % certainty.
regards, Erik.

Similar Messages

Plug-Ins for Logic Express 9

Does anyone know of any sites where one can download plug-ins for Logic Express 9 (either for free or for purchase)? Also, I know that one can use sound fonts (.au) with GarageBand --do these also work in Logic Express 9 and, if so, do they need to be reinstalled for Logic or do both programs read the same source files?
Thank you!

To piggy back on previous posts, I would definitely pursue Native Instruments. While some may of the plug-ins may seem a bit on the pricey side, you will certainly get your money's worth. If you're looking for strong lead and bass sounds, I would encourage you to check out Massiv - it's my go-to plug-in of choice. I believe there is even a limited demo to try if you want to play around before purchasing.
Hope this helps.
Message was edited by: lostinthesound (spelling correction)

Compatible Plug-ins for Logic Pro X?

Hello Apple Community,
     I am new to Logic Pro X, I am coming from Pro Tools. The only reason why I have purchased Logic Pro is for composing music. I love Pro Tools only for recording audio, mixing, and mastering. I was wondering if anyone knew if the following Plug-in companies are compatible with Logic Pro X. Waves, iZotope, Native Instruments Komplete 9, Universal Audio (UAD).
     If these are not compatible, if you could let me know what plug-in companies are it would be very much appreciated.
     Thanks!

They all make OS X compatible plugins. Logic uses the AU (Audio Unit) format, so VST plugins won't work. For UAD I believe you need extra hardware.

How do i import 3rd party VST plug-ins into Logic Express 8???

I downloaded some vst plug-ins for logic express online somewhere and the instructions to install them says to go to library/audio/plug-ins/vst and to just drop them in there. i do that, but then when i drop them in there and then start up Logic, they're no where to be found in the program
is there another way you are suppose to import vst's?

You can't use VST plugins straight in Logic. The format recognized is AU (Audio Units) but there is a workaround using a program called VST to AU Adapter.
http://www.fxpansion.com/index.php?page=5
cheers
rob

Plug-Ins from logic for Itunes?

Is it possible in Itunes to use Plug-Ins, for example a EQ from Logic?

I am thinking this is a Logic specific problem now.
I cannot see the logic instruments in the channel inserts either, although the effects and signal processors are there.
where should the EFM 1, ES m etc folders be on the drive?
asuming they are in the right place what settings could affect their showing up in the insert menu??

Plug-ins for vocal editing (logic pto 8)

Does anyone know where I can get a really nice vocal editing plug in for logic pro 8? Something like v-vocal in sonar? I know of antares autotune but is that for mac?
Thanks guys!

Anything that is available as an Audio Unit can be used in Logic. Antares Autotune is available as an AU.
But trust me on this one, this is the one to own...
http://www.celemony.com/cms/index.php?id=products_plugin

How to PERMANENTLY get rid of 3rd party Plug-ins in Logic pro 9.

Hi, im trying to get rid of some 3rd party plug-ins on logic, but it only looks like i can disable them. (sweeping them under the rug isn't helpful) This is a problem because i have one version of a plug-in that doesn't work and im gonna get another of the same version (with expansions) to replace it so im concerned that the 2 versions will conflict with one another and i wont get the expansions i payed for. Anyone have a solution to permanently get rid of plug-ins? -Tim

The component files of the third party plugins are in:
Local Drive\Library\Audio\Plug-Ins\Components
You can make a backup of a given component (say in a desktop folder) and replace the component with other version etc.
You can use [Pacifist|http://www.versiontracker.com/dyn/moreinfo/mac/12743] as well to install/extract a component from a given installation pack etc.
Edit: Sorry Immo I duplicated your reply solutions hitting posting a few sec. later...
!http://img59.imageshack.us/img59/4967/aglogo45.gif!
Message was edited by: Vacheto

Plug-ins for LE9

Hi all.
I've just bought the following gear for a small home recording setup: MacBook Pro 2.44mhz, LE9, TC Electronic Impact Twin, SE Electronic 2200A Mic, M-audio midi keyboard.
The music I'm doing is minimalistic folk or something like it.
Currently i'm using the plug-ins that comes with LE9, but my question is: what would be great plug-ins for my style of music? I'm going to use it mainly for Keys, strings, flutes, drums and bass. I would really like plug-ins that sounds organic, is there something like that out there? And what about free plug-ins, where do I find these?
I'm going to link to my music so that you guys can get a sense of the style, the music on myspace is recorded in a traditional fashion though.
www.myspace.com/deerbearband
All the best
Lars

Welcome to the world of Logic !
I would recommend the M-Tron Pro and VSE both from G force for strings , flutes , etc. http://www.gforcesoftware.com/index.php
And Maybe some very simple less polished sounding sample libraries for bass and drums which you could load right into the esx-24 sampler in logic ,but I can't recommend any since A: thats not my style so I don't know the names of some I've heard and B: Sample libraries are a very personal choice.
I would recommend that if it looks flashy it's probably not going to produce than salt of the earth sound your after though .
As far as free plugs go Don't crack is the place to go
http://www.dontcrack.com/freeware/software.php/id/7037/audio/Plug-ins/plugins/AU /
http://www.dontcrack.com/freeware/software.php/id/7030/audio/Virtual-Instruments /plugins/AU/
Good luck

UAD Powered Plug-Ins with Logic Pro?

I am considering the Apollo Twin http://www.uaudio.com/twin audio interface and am wondering if anyone has had any luck using their UAD Powered Plug-ins in Logic Pro? Thanks.

zimon-zimon wrote:
hi there all.
last march (07), i went to an event in london called the Sounds Expo....
I was given a CD called the WAVES PLUG INS demo.
I put it in my mac and from that day on, i have been unable to use any third party plug ins such as fxpansion GURU, native instruments Absynth 4, PSP Vintage Warmer etc etc...
This is due to the PACE protection scheme that was probably updated by the Waves installer. Oops.
I have reinstalled logic several times, but nothing has changed. The usual AU plug ins in Logic work just fine. Its anything that is third party that doesnt work, like extra soft synths of effects etc...
Logic has NOTHING to do with this issue. This is a copy-protection issue. I RECOMMEND you do the following: Run Onyx, and delete ALL caches, especially the kernel caches. This will reset the PACE cache, wherefore the plug-in list for the copy protection software will be reset, so you can see your plugins again. I've been through this.
I phoned The editor of SOund on Sound magazine and he suggeste4d that I reinstall OSX itself...
No disrespect to whomever you talked to over there, but the guy does not know what he is talking about.
I'm a little worried if i do this, i will lose all my files????
Yes you will. DO NOT REINSTALL OSX.
Any advice on how to get these plugins working anyone???
See my answer above.
Many thanks for your time.
PEACE
Cheers

Sonnox plug-ins for Pro Tools / Audio restoration

Is anyone using the Sonnox plug-ins for Pro Tools for audio restoration? If so, what is your opinion?

Welcome to the world of Logic !
I would recommend the M-Tron Pro and VSE both from G force for strings , flutes , etc. http://www.gforcesoftware.com/index.php
And Maybe some very simple less polished sounding sample libraries for bass and drums which you could load right into the esx-24 sampler in logic ,but I can't recommend any since A: thats not my style so I don't know the names of some I've heard and B: Sample libraries are a very personal choice.
I would recommend that if it looks flashy it's probably not going to produce than salt of the earth sound your after though .
As far as free plugs go Don't crack is the place to go
http://www.dontcrack.com/freeware/software.php/id/7037/audio/Plug-ins/plugins/AU /
http://www.dontcrack.com/freeware/software.php/id/7030/audio/Virtual-Instruments /plugins/AU/
Good luck

Missing plug-ins on Logic Pro X

I dont know if the OS update screwed up all my plug-ins on Logic, but now i scroll to pick an instrument on a track and turns out i have none. I open up my old sessions and find that they are missing as well, can someone help? *** is going on.

What does the AudioUnit Manager In Logic Pro X's preferences tell you about your plugins? Are they found and validated there?
if not,
Are they all 64bit versions? ( as LPX doesn't support the older 32bit versions....)
Which plugins are missing?
Are you looking in the right places.. Instrument button for SI plugins and Insert button for FX plugins...
Failing all that, post up a screenshot of your AU manager and also one of the Instrument or FX dropdown menu to indicate where the plugins are missing from and whats there instead

What are the best plug ins for iMovie 11 running on Lion?

What are the best plug ins for Imovie 11 or Imovie HD running Lion? Especially transitions & effects for still pictures.
Thank you

Hi
For iMovie'08 to 11 - There are no Plug-ins - not supported at all
iMovie HD (in reality HD5) - doesn't work under Mac OS X.7 - at all
iMovie HD6 - can take Plug-ins and run under Mac OS X.7 - BUT some of the Plug-ins doesn't work under X.7
old list on - Plug-ins - Only relevant to iMovie HD6 (May be they are too old)
Stupendous software
www.stupendous-software.com
GeeThree
www.geethree.com
cf/x.
www.imovieplugins.com
Apple
www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
www.imovieplugins.com/fxhome.html
fxStabilizer - for iMovie - Google it
Yours Bengt W

How can I add my software in Adobe's Third-party plug-ins for Adobe Premiere Pro ?

Hi,
Our company have a software called Moyea Importer for Adobe Premiere.
Moyea Importer for Adobe Premiere is a recommended FLV, MPG, RMVB, HD video import plugin for Adobe Premiere Pro. This plug-in enables users to import FLV videos with various codec like AVC/H.264, AAC, Screen Video, Nellymoser, MP3, PCM, and Sorenson H.263. Besides FLV video, the plug-in allows AVCHD import and HD video import in MTS, M2TS, TP, TS, and MKV formats.
Moyea Importer for Adobe Premiere do not convert your video so it keeps video quality for you. The plug-in automatically detects the Adobe Premiere versions on your machine and you can choose the versions to install the plug-in. It currently supports Adobe Premiere Pro 1.0/1.5/2.0/CS3/CS4 and Elements 3.0/4.0/7.0/8.0.
I notice in Third-party plug-ins for Adobe Premiere Pro this part, Adobe didn't get any such plug-ins. They only have two file support plug-ins and Moyea Importer can fill the blank.
Now I want to submit this software on Adobe's site but I don't know where to submit or who I should to contact. Any suggestions? I really need your help and I am sure it is really good software.

Any suggestion? Admin of this board? Who can help me

How do I get administrative priveleges to install optional plug-ins for cs5

how do I get administrative priveleges to install optional plug-ins for cs5 and or how to install these optional plugins thanks

To add to Mylenium's reply, here's how to do it on Windows and this is what microsoft website says:
Why do I have to be an administrator to install a program?
Only administrators can make changes that will affect everyone who uses the computer, such as installing software and hardware and changing security settings.
If the program you are trying to install or run says you must have administrator rights, but you are already an administrator on the computer, right-click the installation icon for the program, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If the program installs but does not run, right-click the program icon, click Properties, click the Compatibility tab, select the Run this program as an administrator check box, and then try to run the program.

Mac Plug-ins for Adobe indesign CS5

Hi all,
I am making new Indesign CS5 plug-ins for Mac os.
build my project and i get error "Developer/usr/bin/gcc-4.0 failed with exit code 1"
what it mean error "exit code 1"?
and I am work on porting of Adobe Indesign CS4 to CS5 plugIns for Mac Os,What Project Settings required Xcode for build code succesfully?
Pls kindly help me out from this problem.
Thanks a lot:

I build samples project its working fine for that.
I use xcode Version 3.1.3
Component versions
Xcode IDE: 1191.0
Xcode Core: 1192.0
ToolSupport: 1186.
are you set any path, inside Project Settings before compile your project?
like "jni" releated path.

Plug Ins for logic 8

Similar Messages

Maybe you are looking for