Plug-Ins not showing under "Audio Units"

When I open up Logic and try to insert a new plug-in, the only thing there is Apple. I have the .component files in MAC HD > Library > Audio > Plug-Ins > Components. But they simply won't show up in Logic. I'm in 32-bit mode and I've tried 64. I've scanned and rescanned my audio units. They are all validated and checked. I've restarted Logic and my computer. Nothing. Any help?

I have the "opposite" question. I have a lot of AU plugins in Logic but I can't find them in the expected places (as above, or in the User Library). I would like to remove some obsolete ones, but am totally clueless where they are. I have done Finder searchs, including system files, to no avail.

Similar Messages

3rd Party Plug-Ins Not Listed Under Inserts

I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
Please help.

Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
Cabarete
Software response:
validating Audio Unit Stylus RMX by Spectrasonics:
AU Validation Tool
Version: 1.2.1b3
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
Manufacturer String: Spectrasonics
AudioUnit name: Stylus RMX
Component Info: Stylus Audio Unit.
Component Version: 1.6.1 (0x10601)
Component's Bundle Version: 1.6.1
* * PASS
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 44.468 ms
WARM:
Time to open AudioUnit: 0.124 ms
FIRST TIME:
Time for initialization: 0.009 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0
Output Scope Bus Configuration:
Default Bus Count:8
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Tail Time
PASS
VERIFYING PROPERTY Bypass Effect
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Render Quality
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw StyM VST - Spectrasonics View
PASS
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: unused
auvaltool(714) malloc: * error for object 0x13d3f850: double free
* set a breakpoint in mallocerrorbreak to debug
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
* * PASS
PUBLISHED PARAMETER INFO:
# # # 74 Global Scope Parameters:
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
* * PASS
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[0, 2]
No Input, Output Chans:
0-1 0-2 0-4 0-5 0-6 0-7 0-8
X
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
* * PASS
RENDER TESTS:
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 44100 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 48000 Hz
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Stylus RMX by Spectrasonics...done.

Waves plug-ins not showing up in AU.

My waves plug-ins never shows up in logic 7 or 8. But it works as AU under peak and Cubase (under VST). Any solutions?

make sure you are using the latest Intel version, which is 5.9, as far as I know.

Plug-Ins Not Showing In Logic Pro 9

Hey guys, I'm having some trouble with plug-ins in Logic Pro 9. Any of the third-party plug-ins I have installed (I've checked the location in the Components folder and they're all there, so I guess it's not something related to the plug-ins location) don't show up, even after rescaning the AU library, reopening Logic and all that stuff.
Anybody has a clue about what could cause this and how to solve it, please?
Cheers!

If you ran Logic Pro in 32bit mode first and then in 64bit mode.. any 32bit plugins which you have installed, will appear under either the Software Instrument button (In LP9) or the Insert FX button for a Software Instrument track....
If they dont then either..
You didn't install the AU version of the plugin.... in which case, please do so and then again run LP in 32bit mode and then 64bit mode to make the 32bit version appear in LP 64bit mode..
or....
You are not looking in the right place as shown below..
or...
You are trying to access a software Instrument on an Audio Track which wont work.. Create a Software instrument track and try again...
or..
You are not using a legal version of the 32bit plugin...... in which case, asking here is a bit of a dumb move...
Here is a screenshot of where the Software Instrument button is in LP9... Click and hold.. on it and look for the 32bit AU plugin sub menu and choose Sylenth...

Plug ins not showing

After migrating from tiger on a powerbook G4 to snow leopard 10.6.7 on 2.93 GHz i7 imac. all my plug ins are not showing in Garageband 11 (Atmosphere, Rmx, trilogie, FM7 etc ...)where should they go? I put some in HD> library> audio> plug-ins> components ... but still none showing when I am in GarageBand.
Thank you for your patience

You need to make sure that they are Universal Binaries, you can't use PPC plug-ins on an Intel machine.
You might need to see if there are updates available from the mfg.

Plug-ins not showing up in Aperture 3.1

I have been using Aperture for a past few days, and when i tried to instal two plug-in programs (photoshelter - it is a photo hosting site and the plug in allows you to upload photos directly to the site, and HSC edit - this is an edit tool I downloaded from the Apple site). Neither of them show up in the menu of Aperture. I tried re-installing, but doesn't work. what could i be doing wrong?

Frank,
I have a similar situation that you seem like you might understand.
I bought a new computer, started a new user (A), and downloaded Aperture. Then I realized it was easier to move the pictures from my old computer by transferring everything from that computer, creating another user (B) on my new computer. Since then I havent used user A at all, but now I can't access plug-ins for Aperture. Based on your posts above I checked user B and sure enough there are the plug-ins. I tried to repair permissions in the disk utility, and that didn't help. I restarted the program after each try.
Any idea of what I might try next?
On a separate note, I've been unhappy with this new macbook pro from the start, as compared to my old macbook, in terms of speed. Plus the battery life *****, which is a main reason i ditched the last one, no where near as advertised. Could an extraneous unnecessarily running/ partitioned in the background be creating any problems for speed or battery life? Or was dumping in everything from my old computer a bad idea?
Thanks in advance to anyone who can help.

Editing software filters/plug-ins not showing in LR 5.4

I have editing software and plug-ins that I use mostly in LR, but now I notice when I use them, the filters don't show up. I have Google Nik Collection, Topaz suite, Photomatix and Perfect Effects 8. I went to my LR preferences >external editing and the first editor I have is Photoshop. The sdditional external editor is HDR Efex pro 2. In the Additional editor, should I be making that a new preset, or as a custom preset. Am I only limited to 2 choices in the External editing preference pane?
I notice that in the File>Export w/Preset, it lists HDR Efex Pro and Photomatix Pro. Under file>Plug in extras, it lists Perfect Effects 8, and again, Export to Photomatix Pro. Opening any of them, the filters don't appear like they used to. What am I overlooking? This is making me crazy with loss of time since I have a show coming up. Any pointers would be appreciated.
I am using a Mac, OS Mavericks which I just installed a couple of weeks ago.

It isn't obvious, but you can add as many external editors as you want. In Preferences/External Editing, hit the Choose button, select an application, then from the dropdown select "Save current settings as new preset". Repeat as needed.
Hal

Photo Tools 2.6 plug-ins not showing up in CS6

I copied Photo Tools 2.6 into CS6 Plug Ins but I can't find it anywhere when I open CS6.
Suggestions/ideas?

Hello, isn't there an installer you are supposed to use?
You might want to wait for Jeff Schewe to show up in here.
And do check this FAQ: http://forums.adobe.com/thread/965931?tstart=0

"3rd Party Plug-Ins" Not Showing Up In Preference Pane...

I'm trying to install a couple of 3rd-Party Plug-Ins... Apparently the procedure for this is to go to Preferences, and in the "General" pane, there should be a heading that says "3rd Party Plug-Ins" along with buttons "Choose..." and "Clear" and a path.
On my General Preferences Pane, there is no such section... It goes right from "Content Library & Templates" to "Media," with no "3rd Party Plug-Ins" listed anywhere in the pane.
Using Motion 3.0.2.... Did something change and they didn't change the manual to match? Or is there some setting elsewhere that's making that option disappear?
Thanks!!!
Nick

Howdy,
The "3rd party plug-ins" section in the Library and preferences really refers to AE plug-ins. Third-party FxPlug plug-ins (like dvMatte or Boris Continuum) show up mixed in with the regular filters and generators.
That "3rd party plug-ins" path setting in the preferences doesn't appear on Intel-based Macs, as they're no longer supported. If you have a PowerPC system, they'll show up (and so will the setting).

Yamaha o1x Issue with plug ins not showing on the DAW

Hi everyone, Been a while since I have used the Logic program, and I have updated the software as it was developed over the years. First I have already discovered that the Mlan will not connect in 64 bit mode and boot my macbook pro in 32 bit. I completed a mix a few weeks ago and need to eq certain areas and this job would be a breeze using my Yamaha O1x which is old but still works marvelously but the plug ins controls are not appearing on the DAW which is most frustrating. I am doing a number of experiments ( Which I would prefer not to ) to see if any plug ins work and plan two is to use an old 12" power pc and load an older version of logic and use the dongle to finish this up, failing that I guess I will have to do the finger dance with my track pad. Anyone have this issue? Anyone using a newer operating system and current logic pro using an O1x and having no issues? Thanks for reading. Cheers Chris

Not sure those plugins will work on recent versions of OSX and Logic, but if they could work it won't be on the initial version of OSX 10.7.5 which had a serious AU plugin problem... er.. BUG!
See if the supplemental update helps... (I would reboot after installing)
http://support.apple.com/kb/DL1599
If not, going back to the older PPC system may be the only choice.
I set up an O1X in a small studio many years ago, nice mixer, we used a digital patchbay and a master wordclock to sync up various digital devices.

Boris plug ins not showing up in effect menu?

I had to uninstall and reinstall my system. Everything is fine except my Boris effects are not showing up the effect menu. The disc was installed and the a copy of the folder is in the library app support and the FCP system support folder. Why don't I see them in the program?

yes- I have the few Boris options that come with FCS.
But I'm talking about the full Boris Complete effect application. The effects should be in the video filter drop down menu. For some reason they are not showing up.

Positions not showing under org units

I am starting to configure the out of the box Org Chart model and I have managed to get the Org Hierachry working but there are no positons showing beneath this.
The SAP extractor has extracted the data which I have checked in the SQL Databse and the information appaers in the backend?
Any help would be appreciated?
Also it keeps saying the "Position Hierachy" has no root object but this has been specified as per the org chart which works.
Many Thanks

Hi Luke,
This is the erroe coming from my log file:
06/01/2010 19:05:     ERROR: FieldsType : fieldName = ObjectId; tableName = Position; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
06/01/2010 19:05:     ERROR: FieldsType : fieldName = ObjectId; tableName = Position; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
06/01/2010 19:05:     ERROR: FieldsType : fieldName = ObjectId; tableName = Position; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
06/01/2010 19:05:     ERROR: FieldsType : fieldName = ObjectId; tableName = Position; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
06/01/2010 19:05:     ERROR: FieldsType : fieldName = Position; tableName = Position; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'Position'.}
06/01/2010 19:05:     ERROR: CommandProcessor.getDataSet : select top 25 ObjectId,ShortText,LongText,ParentNo,ParentName,Relation,ObjectType,Pernr,EmpAbbr,EmpName,PositionParent,Subty,Prozt,ChiefOf,Vacan,Status from Position where (ObjectId=Position) order by Upper(ShortText) asc, Upper(LongText) asc, Upper(ObjectId) asc, Upper(ParentNo) asc|DC=DestinationConnection : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.
Invalid column name 'Position'.
Invalid column name 'ObjectId'.
Invalid column name 'ShortText'.
Invalid column name 'LongText'.
Invalid column name 'ParentNo'.
Invalid column name 'ParentName'.
Invalid column name 'Relation'.
Invalid column name 'ObjectType'.
Invalid column name 'Pernr'.
Invalid column name 'EmpAbbr'.
Invalid column name 'EmpName'.
Invalid column name 'PositionParent'.
Invalid column name 'Subty'.
Invalid column name 'Prozt'.
Invalid column name 'ChiefOf'.
Invalid column name 'Vacan'.
Invalid column name 'Status'.
Invalid column name 'ShortText'.
Invalid column name 'LongText'.
Invalid column name 'ObjectId'.
Invalid column name 'ParentNo'.}
Hope you can help.
Thanks

I set in prefferances plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

I set in preferences plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

They are being shown. When Photoshop gray out items it means in the documents current state that item is not supported, Get the document into a state that the grayed out filters can be used. Some filters mat not support some modes like CMYK. 32bit color, Lab etc. They seem to be listed but nor currently applicable. Note whem no document is open all are grayed out the when a simple clipboard image is open all are available.

Migrating PS CS3 to Intel with OS 10.5.6 Plug-ins Not Available

After migrating CS3 to MacBook Pro, 10.5.6, a list of unavailable plug-ins comes up. All except two were PS plug-ins, NOT aftermarket. Sure enough, they don't show up in the filters menu. I don't know where else they are missing. (migrated from Powerbook 10.4.11)
What is to be done?
CS3, OS 10.5.6/ MB Pro 2GB ram, 2.4 Ghz

Migrating is never a great idea, but migrating an application originally installed under Tiger on a PowerPC machine to a Mac-Intel box running Leopard goes beyond being a monumentally bad, horrendous idea. It's sheer lunacy!
You need to wipe out that drive, or at least use the Adobe Uninstaller (installed by CS3 in Applications/Utilities/Adobe/ on your old machine), look for, download and run the CS3Clean script, and then install the application from the original media.
Also, realize that any plug-ins that were not written in Universal Binary will NOT run under CS3 on the Mac-Intel machine,
unless you run CS3 under Rosetta software emulation with a corresponding
massive performance hit.
Never, ever try
"migrating" again. :(

Adobe Acrobat Pro X - plug-ins not loaded

I recently purchased Adobe Acrobat Pro for our company with multiple user licences. Once installed I noticed a lot of features which were in previous versions are not available. When I select the “Help” “About Adobe Plug-ins...” tab, almost all of the plug-ins are not loaded. Is this right and if not, how do I fix it. After reading numerous blogs I still do not have an answer – most refer to 3rd party plug-ins but not to this problem. NB: I am not an IT expert, but can help myself fairly well on software. Using Windows 7. Uninstalled Google Chrome as someone suggested it affects the plug-ins (which also did not solve the problem!)

It's working correctly.
The Help > About Adobe Plug-ins dialog shows the status of dynamic extensions which ship with Acrobat - not third-party plugins you may have installed yourself. These core extensions are loaded on demand, so if you don't have a document open, very few of them will be loaded. It's why the dialog bothers to tell you their status in the first place.
Third-party plugins need to be reinstalled if you upgrade to Acrobat X, as the installation folder is different. Some that were written for previous versions won't work with Acrobat X, especially if they're not designed to cope with the Tools Pane or Protected View in 10.1, but they will not appear on that dialog - they appear on the next menu item down, "About Third-Party Plug-ins".
The UI in Acrobat X is radically different from previous versions, but very few features are actually missing - what are you looking for that you can't find?

Plug-Ins not showing under "Audio Units"

Similar Messages

Maybe you are looking for