Plus sign normalization rule

Hi all,
I am new to Lync so pardon in advance.
I have a set of normalization rules that allow a user to dial a number starting with a plus sign. this works fine for me (North America) while dialing international numbers. what I have today removes the + , adds +011. But more often than not there
are north american numbers that have plus sign. this would translate a +17162223333 to +0111716222333 which is not correct.
Can someone help me as to how create a rule that would leave out north american numbers?
cheers

I agree with Michael, Ken Lasko is the kind of Lync dial plans, definitely read that article, it should clear a lot up. Ken also has tools for automatically creating Dial Plans with proper normalization.
The + is the 011, they're the same prefix, just in different formats. You should never have +011 as a result, even on international numbers, because it's redundant.
So, a US phone number dialed as 17162223333 should normalize to +17162223333 and a South African phone number dialed as 01127315551212 should normalize to +27315551212. As it leaves Lync, you may need to modify that so your Telco
understands it, so at the gateway you might strip the +, or +1, and you may need to add the 011 at your gateway or as a translation rule on your trunk.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

Zoned with a plus sign zero

I am clueless here and if someone can help me to accomplish this conversion.
I have a 6 digit number and need to add three zeros in the start to make a psuedo number. Adding three zeros is very simple as I can just concatenate three zeros. But the tricky part is The first zero in this type of conversion must always be zoned with a plus sign. The hexadecimal representaion for a plus zoned zero is "C0".
Does anyone knows about Zoned plus zero and how it can be done in oracle. Thanks.

user11989050 wrote:
What is S here. Will you please explain this or refer some document to read. ThanksS=SIGN (plus or minus depending on the number input)
You should be aware that the result is a string, not a number anymore, so the usual number rules do not apply to this string. If you want to output this to some textfile then it is fine. If you want it for further calculation purposes then there's no need for such an operation.

I updated my ipod 4 to ios5 and now my plus sign on the contacts and calendar are gone and i cant add events or new people what do i do??

i updated my ipod4 to ios5 and now my plus sign on the contacts and calendar are gone!!
and now i cant add events or new people directly to my ipod..
how can i fix this??

Try looking at the similar posts on the right side of this page under the heading "More Like This". The ones with the green checkmark were solved.

Firefox is not allowing me to add new tabs. I'm pushing the plus sign next to my tab, and it is no longer adding new tabs. How do I fix this problem?

When I open Firefox, I automatically have one tab. The plus sign button to add more tabs is next to the one tab, but it no longer adds tabs when I click on it. When I click on it, it doesn't do anything. How can I fix this problem so I can have multiple tabs? I downloaded the most current version of Firefox, and I'm still having the same problem. I've had this problem for a little over a week now.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Why does my safari close when I try to open a new safari window/tab with the white plus sign?

Every time I hit the white plus sign the whole window closes. I just got this ipad from a friend who erased it. This has happened since I set it up and I have tried resetting it twice. Please help.

Pieter, thanks for starting your own new topic!
That is an old version of Safari. Where did you say you got it from?
Do you have a backup of your 10.7.5 system?
You should update it to 5.1.7.
Can you download from here?
http://safari.en.softonic.com/mac/download

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions

The plus sign button to add new events in iCal on my iPhone is missing.

On the top, to the right of "All Calendars" there is a plus sign that is used to add events. On my 4GS I have that and a "Calendars" button. On my husband's 3GS, those buttons are missing, making it impossible to add events to his calendar. Both phones have been upgraded to iOS5.
In Settings under Calendars the phones have the following choices:
New Invitation Alerts - Both phones - both set 'on'
Sync - only on his phone - set to 'All Events'
Time Zone Support - Both phones
Default Alert Times - Both Phones
Default Calendar - my phone only - set on Calendar (as opposed to Home, Work or Untitled)
Can anyone tell me how to fix this so he can add events to his calendar?
Thanks.

Go to Settings>iCloud>Calendar>On. Toggle it on and off. Leave it on if you want to sync with iCloud but then don't sync with your computer or you may get duplicate entries.

How do I apply a grep style to the plus (+) sign?

I was able to apply a grep style to the minus and equal sign, but not the plus sign "+". It appears the plus sign means 'apply to all' in the grep style box. Can some assist me with this? Thanks in advance.

Thank you. It worked perfectly.

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS 13 TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS EDITOR TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

You have the caps lock on

I can not open the breakpoint dialog in upper right next to plus sign.

EDIT: After more digging into the issue, I found out that the trick is to click AND HOLD on the upside triangle to access the breakpoint dialog box. See link --> Adobe Edge Reflow Team Blog | Q & A From “Talk To The Team”
I can not open the breakpoint dialog in upper right next to plus sign. I click on the downward triangle with no success. Is there a trick to getting this to open? Or better yet, is there a hotkey?
Thank you for your help-
Shawn
Message was edited by: Shawn Rossi

Within Photoshop go to the "About Plug-in…" menu item just below "About Photoshop" to find the Camera Raw version number. On which menu that is depends on your platform, Macintosh or Windows, which you neglected to mention.
Raw files from your camera have been supported since version 2.0 of Camera Raw for years and years, so it's not a question of your version of ACR. Any version of ACR that runs in CS5 should open those files.
I suspect your raw files are damaged (corrupted).

When output SSRS report to Excel, Plus sign was moved to the far left pane in Excel. How to fix it?

Hi there:
I've created a SSRS report and looks good inside Report Manager, See below . plus "+" is in the right place and
if I click it, it will expand.
However, when I output results into excel, it becomes this, notice those plus sign "+" have been shifted to the far left and they are
not line up with each month either... Is there any way to fix in the excel so that users could see exactly what they see in the Report Manger?
Thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi cat_ca,
Microsoft Excel has limitations with how it manages hidden and displayed report items when they are exported. When we export a report to Microsoft Excel format, groups, rows, and columns that contain report items that can be toggled are rendered as Excel
outlines. Excel creates outlines that expand and collapse rows and columns across the entire row or column which can cause the collapse of report items that are not intended to be collapsed. This is by design. For more information about this, please see Show
and Hide section in the link below:
http://msdn.microsoft.com/en-IN/library/dd255234.aspx#ReportItemsExcel
The following similar thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/06303610-5f6b-4c90-80a6-628552a3d36c/ssrs-2008-table-with-line-grouping-excel-export-problem-with-toggle-item?forum=sqlreportingservices
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Text in Illustrator CS6 displays the red plus sign but there is no overset text. How can I remove?

I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course, but is driving me crazy...

I just tried, but the text is point type, not area type, so expanding the box makes the type bigger and doesn’t show extra space that might be there. Looking at the hidden characters doesn’t show any extra returns. I also have a few of these plus signs that seem to be completely disembodied, just floating in space apart from any visible text. Thanks for your suggestion, though.
Amy
starry-logo-Fifth-Press
Amy O'Donnell
Fifth Press
444 East 200 South
Salt Lake City, UT 84111
801.433.6274
<mailto:[email protected]> [email protected]

How to use the plus sign (+) in URLs

I have a procedure that takes a name as a in parameter. When the value of the name got a plus sign in it, the browser can't find the page/procedure. It works for every name without the plus sign.
Ie. the following is an exsample of an URL with plus sign in the value of a parameter:
http://svvmetaapp01.vegvesen.no:7778/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=2435397421&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=NODE_ID&p_arg_values=5&p_arg_names=_node_id_cond&p_arg_values=%3D&p_arg_names=NT_ID&p_arg_values=32&p_arg_names=_nt_id_cond&p_arg_values=%3D&p_arg_names=NAVN&p_arg_values=C[b]++&p_arg_names=_navn_cond&p_arg_values=%3D
Any tip?

Check the supplied PL/SQL package UTL_URL and you might get idea to solve your problem.
Thanks
-Krishnamurthy

How do I get rid of the plus signs in Pages layout?

When I'm working on a document in Pages, the text boxes show little plus signs here and there. How do I get rid of them?
Thanks.

BINGO! Thanks very much!
(How in the world did you discover that?)

Why can't I open a new Tab with the "Plus" sign or "Command-T"?

If I want to open a New Tab, I either press "Command T" or select "New Tab" from the File menu, or click the little "plus" sign in my Tabs bar - - - right? None of them work. What am I missing?

This problem in is Firefox on your Mac?
May users have discovered this problem is caused by Conduit add-ons, such as a Conduit plugin and/or a "Community Toolbar" extension.
You can check for and disable extensions on the Add-ons page. Either:
* Command+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that help with the "+" button? If so, could you name the specific extension that caused the problem?
You might also check the Plugins section of the Add-ons page. You can use "Never Activate" to disable plugins that you don't ordinarily use.

Plus sign normalization rule

Similar Messages

Maybe you are looking for