Plz anyone help me..its urgent..

Hi all
am doing project with struts, j2ee, jsp ete..
and am getting client side exception like
javax.servlet.ServletException: BeanUtils.populate
at org.apache.struts.util.RequestUtils.populate(RequestUtils.java:495)
at org.apache.struts.action.RequestProcessor.processPopulate(RequestProcessor.java:805)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:203)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
so anyone can plz help me out of this..
am expecting u r reply
Thanks in advance !!!

Is there nothing more to the exception?
This exception was caused by.....?
Look for the root cause in the exception and try posting that.
The error is in the BeanUtils populate method, which takes request parameters and puts them into your form bean.
What form bean are you using? Your own class, or a form defined in the struts-config.xml?
Show the struts-config related to the request you are making.

Similar Messages

I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

Welcome to the Apple Community.
You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Plz help me its urgent i have iphone i dnt want my deleted texts my phone was jailbroken if i do restore widout backup should i jailbreak again ,should i unlock again,will the data of texts premantly erased plz answr me

Plz help me its urgent i have iphone i dnt want my deleted texts my phone was jailbroken if i do restore widout backup should i jailbreak again ,should i unlock again,will the data of texts premantly erased plz answr me

Jailbroken phones cannot be discussed in an Apple forum. If you synced your phone with your computer the texts will be in the backup, so if you restore the backup you may get them back, but with a jailbroken phone it's anybody's guess what will happen.

I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

I found this very good
http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

Hi pls help me its urgent

hi experts'
i have to generate asset utilization report in webdynpro
inputs for report are some rfcs
i get result from rfcs
i need to float report i used bussinessgraphic object
its not interactive
if i go for tables
how to create tables with drill down inside table
how to set color for each cell of table depending on condition
please help me
its urgent
and send me code n link

Hi Vani,
Your requirement has many things
1. How to call RFCs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15 [original link is broken]
2. Once you have data, how to work with BusinessGraphics ?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ba2db0e5-0601-0010-9790-e271902f2c38
(This docs contatins all the required info on webDynpro UIElements)
3.Tables
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#46 [original link is broken]
Regards,Anilkumar

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

Plz tell ...its urgent......give ur answer

I want to connect ORACLE 9i and ASP.NET 2005
now plz plz plz can any body tell me wht are the steps 4 tht.....
wht to do...because i dont know anything
plz tell me all the steps from starting
thanks in advance
from chintan

> plz tell ...its urgent......give ur answer
Forums like this work better when people can see what you asking by glancing at the subject line. A better subject line might have been "Connect to Oracle 9i from ASP.NET 2005".
Also I'm afraid it is your problem if it is urgent, not ours.

How can i get my video chat to work on facebook it freezez they see me but all i see is me froze in time can anyone help please its only just started to happen

can anyone help me with video chat on facebook ?my mac book pro cam keeps freezing freinds can see and hear me but i cannot see them im frozen in time but when i go full screen they bappear but they break up any way this can be put right?was fine befor i updated my my mac to the new software

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Please can anyone help this is URGENT

l have a 2540 all in one printer and have just had to reinstall because the Hp support doctor advised it after l couldn't get the printer to print properly it would print a test page but then wouldn't print a written document, then when l tried to print a test page after hp doc advised a nozzle clean l got a blank page?, l then tried to print a web page which came out fine but when l tried printing a copy of that it came out with portions missing?
l really need to get a typed document printed asap for a meeting later this morning, please can anyone help lve been up all night trying to do this.

Hi,
Please print a test page and evaluate it- can you see any color as the included sample?
Load clean, white U.S. Letter or A4 paper in the input tray, if necessary.
Touch and hold the Power button ( ), and then press the Cancel button ( ).
Let go of the Cancel button and then the Power button. The test page prints.
Check the estimated ink level graphics on the test page.
Figure 65: Example of estimated ink levels
If you see any print quality issues with either the Black or the Color part of this printed sheet, remove the cartridge which show print quality defect from the printer, then print the document while the printer in Single-Cartridge mode to get your document ready. (For ex.:if you see any issues with the Magenta, Cyan or Yelow remove the Tri-Color cartridge)
Next follow thes document to troubleshoot the print quality issue:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03827551&lc=en&product=5295967&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to provide h ref dynamically plz help me its urgent

Hello all
String fno=null;
ServletContext context=getServletContext();
context.setAttribute("fno","");
PreparedStatement st=dbcon.prepareStatement("select * from student where name=?");
st.setString(1,name);
ResultSet rs=st.executeQuery();
while(rs.next())
out.println("<a href=/jj.jsp>");
fno=rs.getString(1);
context.setAttribute("fno",fno);
out.println(rs.getString(2));
out.println(rs.getString(3));
}in jj.jsp i have written as:
ServletContext context=getServletContext();
Object obj=context.getAttribute("fno");
String fno=obj.toString();
out.println(fno);
PreparedStatement st=dbcon.prepareStatement("select * from student where fno=?");
st.setString(1,fno);
ResultSet rs=st.executeQuery();
while(rs.next())
out.println(rs.getString(1));
out.println(rs.getString(2));
out.println(rs.getString(3));
}this code works only for one record if there are for eg:if there r 3 records like
1 vin
2 vinp
4 vik then it will take only last record i,e 4 and dispay its corresponding things
but i want if i will click on any id it should display me detalils of it in jsp as i have written above.
how to do it.
plz send me.,
vidya.

>
iam using servlet context set and get attributes in
ordder to pass the value through the forms this works
but not with multuple records
sir plz hgelp me.Don't use ServletContext for this. If there are multiple users of your server ServletContext will be shared between them which would be disasterous.
To pass attributes between Servlets and JSPs use the request attributes. Each attribute is one object, but that object can be, for example, an ArrayList containing multiple row objects.
You'd do somthing in your JSP like:
<jsp:useBean id="dataTable" class="java.util.ArrayList" scope="request"/>
<table>
<%
for(Iterator it = dataTable.iterator; it.hasNext();) {
MyRowBean bean = (MyRowBean)it.next(); %>
<tr><td><a href="<%= bean.getURL() %>"><%= myBean.getName() %></a></td>
.......</tr>
<% } %>
</table>

SOMEONE PLZ HELP ME, ITS URGENT

I cant make the script for the button to play the movie, can
anyone please help, I put this scripted in
on(press) {
_root.gotoAndPlay('1','scene2');
and it dosnt work, and im really new at this and the lessons
on flash doesnt even explain it proparly

MusicBabe wrote:
> I cant make the script for the button to play the movie,
can anyone please
> help, I put this scripted in
>
> on(press) {
> _root.gotoAndPlay('1','scene2');
> }
>
> and it dosnt work, and im really new at this and the
lessons on flash doesnt
> even explain it proparly
First, DO NOT use scene name in your action.
Select th frame you like to target and hit CTRL F3 to open
properties panel,
type some LABEL name in the label window.
DO NOT use digits for names and do not start names with
underscores _name
Call it something unique, "my_labe_01" than use this action
instead :
_root.gotoAndPlay("my_label_01");
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

I am getting error!!!..Plz help! its urgent!!!

Hi Experts,
I am getting following error.
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.progmodel.context.ContextException: DataNodeInfo(LoginView): unknown child node Frage
Please help me with this.
Cheers,
Darshna.

Hi Darshana,
In the case of characteristics with attributes from the attribute names, the application generates corresponding context nodes in the Web screen application. No special characters are allowed here. In the case of attribute names with special characters, the error message com.sap.tc.webdynpro.progmodel.context.ContextException is issued when you call the F4 input help.
The error is corrected in SAP Netweaver 2004s BI Support Package 8 Java. For Support Package 7 Java, you must import Support Package 7 Java Patch 1.
Check this links.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cef4f43e-0d01-0010-db84-ede25c874115">Why to use the Common Model Interface (CMI)?</a>
Sap Note
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_pla/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393339333237%7d">939327</a>
SapNote
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_pla/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303038333535%7d">1008355</a>
Regards,
Mithu

Plz Help Me its Urgent

Hi Gurus
Please help me related to the following issue....
How can i get all the standard program names in SAP related to some perticular functional area(eg. FI or FM)? Is there any direct method to identify the report programs only? please help me with some example..

Hi,
Go to SE11 --> table name --> TRDIR --> Field name APPL , in this field input any one of the characters based on the module.
A Assets accounting
D DASS control station
E RIVA
F Financial accounting
G General Ledger
H Human resources planning
I Maintenance
J RK projects
K Cost accounting
L Warehouse management
M Materials management
N Hospital
P Human resources
Q QSS
S System
V Sales
Y Customer head office
Z Customer branch
And in the field SUBC input 1 for executable program etc.
And in the filed RSTAT input P for standard SAP Programs.
Thanks,
Sriram Ponna.

Plz anyone help me..its urgent..

Similar Messages

Maybe you are looking for