PLZ HELP ME:::Degradation in performance of ORA-10G in solaris sparc
Hi ,
We recently installed solaris 10 (5.10) on sun sparc 64 bit machine and created oracle DB with 10.2.0.1 release .
Our java application calls the oracle procedure
and procedure returns the result set with sys_refcursor as out parameter.
After solaris 10 installation, our application performance has come down drastically.
The same application is running fine on solaris 9 ( 5.9 )
Old configuration
sun sparc 64 bit
solaris 9 (no patches applied )
oarcle 10.2.0.1 (no patches applied )
jboss 3.2.7
jdk 1.4
New configuration
sun sparc 64 bit
solaris 10 (no patches applied )
oarcle 10.2.0.1 (no patches applied )
jboss 3.2.7
jdk 1.4
would like to know about any known Solaris , Oracle DB patches to address this performance issue.
Any solution to bring back the same old performance with out downgrading , would be of great help to us.
thanks a lot in advance.
user645751 wrote:
we dont have this problem before on the same machine.
But the machine is rebooted with new OS of solaris, and Oracle 10G is installed Freshly as previously.So you want to say that the only thing that changed is the Operating System, the remaining things haven't been touched? "Freshly" installed sounds like a new installation, but that's not what you want to say, is it?
But if we include in the new stored procedures, they r not executing at the same time as earlier procedures does.Unclear what the "new stored procedures" are you are referring to.
No change in the procedures and queries.
we have two instances of our application on the same database with stored procedures(queries included in the stored procedures), this is causing degradation.
As the second instance with no stored procedures, but the same queries will be posed is not showing any degradation.So you have two versions of your application - one using stored procedures that contain queries (and return the result set as REF CURSORs?) and the other one doesn't use these stored procedures?
You need to track down what is causing the performance degradation. Since you're already on 10g you might want to use the built-in AWR reports as a starting point to find out what might be the difference resp. what is causing the most load on the database (of course only if you have an AWR license purchased).
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/
Similar Messages
-
PLZ HELP US IN IMPROVING PERFORMANCE
Hi ,
We recently installed solaris 10 (5.10) on sun sparc 64 bit machine and created oracle DB with 10.2.0.1 release .
After solaris 10 installation, our application performance has come down drastically.
The same application is running fine on solaris 9 ( 5.9 )
Old configuration
sun sparc 64 bit
solaris 9 (no patches applied )
oarcle 10.2.0.1 (no patches applied )
jboss 3.2.7
jdk 1.4
New configuration
sun sparc 64 bit
solaris 10 (no patches applied )
oarcle 10.2.0.1 (latest patches applied )
jboss 4.2.0
jdk 1.5_12
we would like to know about any known Solaris , Oracle DB patches to address this performance issue.
and also we would like to know about any incomapatability between the jboss and jdk we have used.
Any solution to bring back performance, would be of great help to us.
thanks a lot in advance.user645751 wrote:
Hi ,
We recently installed solaris 10 (5.10) on sun sparc 64 bit machine and created oracle DB with 10.2.0.1 release .
After solaris 10 installation, our application performance has come down drastically.
The same application is running fine on solaris 9 ( 5.9 )
Old configuration
sun sparc 64 bit
solaris 9 (no patches applied )
oarcle 10.2.0.1 (no patches applied )
jboss 3.2.7
jdk 1.4
New configuration
sun sparc 64 bit
solaris 10 (no patches applied )
oarcle 10.2.0.1 (latest patches applied )
jboss 4.2.0
jdk 1.5_12
we would like to know about any known Solaris , Oracle DB patches to address this performance issue.
and also we would like to know about any incomapatability between the jboss and jdk we have used.
Any solution to bring back performance, would be of great help to us.You seem to have this issue now for quite a while? See here:
PLZ HELP ME:::Degradation in performance of ORA-10G in solaris sparc
Check your AWR reports on the new database if you can spot any notable issues there, if you have the license or install/check STATSPACK reports if you can't use AWR.
You need to find out where the root cause of your problem is, and it might not be the database.
In your old thread you had posted the same configuration for both systems, except for the O/S version. Now you seem to have upgraded a lot of the components like JBOSS version or the JDK version.
oarcle 10.2.0.1 (latest patches applied )Does this mean 10.2.0.4, or what does "latest patches applied" but 10.2.0.1 as version mean?
Open an SR with Oracle and ask them if they are aware of any generic Solaris 10 issues.
In your last post you talked about "new stored procedures" so it wasn't clear if you really only changed the O/S or applied any changes to the application/database as well.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
While trying to change password getting ora-00600 [4842] - Plz help
while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : LinuxHi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike -
Hi plz help me out Ora-2097,ora-00439 error
hi plz help me out .i'm getting this error in alert log file
ora-2097 :parameter cannot be modified because specified valued is invalid
ora-00439: feature not enabled: database resource managerDo you know what parameter may have changed?
The error indicates something about the database resource manager so that may be a clue.
If you have a backup of the init.ora file now would be the time to pull it out.
If you really get stuck comment out all parameters except what you think you really need and then add them in one by one until you find the culprit. -
Ora - 00600 error plz help urgent
hello all sir plz. help would should i do.
by mistake i made changes in spfile file.... after that i got this error
any solution ?
plz. help sir
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-00600: internal error code, arguments: [733], [538970164], [pga heap], [],
help sir
waiting for replyfirst of all
thanx for my reply
sir i have bkp through rman but when i am connect to rman it give me error
2. i have no pfile<sid>.ora file
3. i try to start my database through pfile text file i got error..
plz. reply sir what should i do.....
how can i connect rman....
C:\>set oracle_sid=db01
C:\>rman target sys/oracle@db01
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
C:\>
again thanx.
i have full database bkp through rman. -
Plz help ...Error on data insert ORA-01722 :invalid number
Hi everybody
I have the strange situation
I tested my code on test database It works well
but when another user want insert new data on the same table on the working database Oracle give message ORA-01722 :invalid number
and then I look to table's structure
On the table my data type that i want insert and table type is same
Plz help ...sriram wrote:
Based on your Input I can give you
ORA-01722: invalid number
Cause: The attempted conversion of a character string to a number failed because the character string was not a valid numeric literal. Only numeric fields or character fields containing numeric data may be used in arithmetic functions or expressions. Only numeric fields may be added to or subtracted from dates.
Action: Check the character strings in the function or expression. Check that they contain only numbers, a sign, a decimal point, and the character "E" or "e" and retry the operationI checked input value and table column type are same Because of i can't understand this error message -
500 internal server error..plz help
hi,
since i started working on oracle apps...this forum has proved itself alt helpful...
i have performed a single node installation successfully over my laptop on win xp sp2 os.
alt of error generated bt in da end i always found a solution here...
guys like hsawwan are a great asset for this forum.....
may GOD reward u guys fr da job u r doing by helping others....
my recent problem has left me in a fix....
problem:
after a successful installation my system was working very fine ... i used the application and every thng seemed to work ok...
bt thren i restarted my pc nd this chaos started ....
first m receiving
500 internal server error...
thn a blank screen
now again 500 internal server error...
steps i performed
1-restarted db listener
2-Disabled Distributed JVM Cache by changing "LONG_RUNNING_JVM=" from "true" to "false" in the oc4j.properties.
reference =metalink Doc ID: 761869.1
plz help me get rid of this error.....
m nt an xpert .m a newbie.. so if u xplain in plain simple word i'l b grateful....
thanx thanx thanx in advance ....HI
Sorry for late response ...
actually i performed the installation of 12R ON MY LAPTOP...
SORRY for posting it in 11I INSTALLATION issues...
my problem was solved by this action plan...
i am writing it here for some future reference ...
open a new shell and set your apps environment
then goto following directory -------->>> cd $ADMIN_SCRIPTS_HOME
stop this service ---->>> adopmnctl.sh stop
make a check if it is really down--------->>> ps -ef | grep <USER> grep opm (optional)
delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/* (optional but it would be better if u perform it)
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
again start the services ------>>> adopmnctl.sh start
restart your machine ....
this solution worked for my pc ...
note ** solution may differ for different users ....
thanks a lot helios and hsawwan for ur support .... :) -
pl help me i want to import a dmp file but i recevied such type of
error. plz help me
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
Export file created by EXPORT:V08.01.05 via conventional path
Warning: the objects were exported by DBC, not by you
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
. . importing table "FACULTY"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "FACULTY_ADM"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "FEE"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "ISTANNUAL"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "SNDANNUAL"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "STUDENTS"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "TIME"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
. . importing table "TIMETABLE"
IMP-00058: ORACLE error 911 encountered
ORA-00911: invalid character
Import terminated successfully with warnings.Was the export file made on the same platform as the import is being ran on? If not, was a BINARY ftp used to copy the file between platforms? If one of the two platforms is Windows while the other is UNIX then the ascii ftp corrupted the file. Re-transmit it using a binary ftp and try again.
What version of the database was used to make the export? It must be the same or lower than the version being used to perform the import.
These are two of the most common problems. Hopefully one of them is the one you have.
HTH -- Mark D Powell -- -
Help me nokia asha 306 Plz Help Me
Hellow dear sir
plz help me about nokia asha 306.
my nokia asha 306 is not sport jar file.
i update my mobile v7.42 07-05-13
when the orignal softwere not this problam
plz give the new softwere of nokia asha 306
waiting 4 your reply
thanks
***Alone***I request you to kindly re-install the software of your Nokia device. Before re-installing the software kindly take the backup of your device.
Please follow below mentioned steps to take backup of your phone:
1. Connect your phone with PC via USB cable.
2. Select Nokia Suite mode.
3. Run Nokia Suite Application.
4. Click on Tools.
5. Click on Backup.
6. Click on Next.
7. Select Content for Backup.
8. Click on Start to perform Backup Operation.
To restore device backup please follow below mentioned steps:
1. Connect your phone with PC via USB cable.
2. Select Nokia Suite mode.
3. Run Nokia Suite Application.
4. Click on Tools.
5. Click on Restore.
6. Select the latest backup file from your PC.
7. Click on Start to restore.
Note: Your device should be fully charged before backup and restore.
To re-install your phone software, please connect your device via Nokia Suite and follow below mentioned steps:
1. Go to Tools.
2. Click on Software Update.
3. On the Software Updates page, under your device click the reinstall link to start the wizard that will guide you through the reinstallation of your device software
Note: Before re-installing, please remember following points:
1. Take backup of your devices using Nokia Suite.
2. Your device should be fully charged.
Please "Do Not Remove" your device during re-installing process.
You can access the link mentioned below in order to download Nokia Suite:
www.nokia.com/nokiasuite
In respect of the concern regarding Orkut , Chatting application, Social application, Music applications I request you to download related applications from Nokia Store by accessing the below mentioned link:
www.store.ovi.com
Further, I would like to inform you that you can download the map data using Nokia suite. But for this you have to connect your device with PC and have to run Nokia suite in your PC. Kindly follow the below mentioned steps to download Map application:
1. Connect Device to PC using USB.
2. Launch Nokia suite on PC.
3. Click on Maps icon.
4. Select the Regions such as America/Europe/India.
5. Click on the country which maps data is required.
6. Click on download. Wait until maps data is downloaded on device.
Kindly let me know if you require any further information or help.
Thanks & Regards,
Sujith Varghese
Nokia Care Representative
India
NOKIA Support Services:
1. Find the nearest Nokia Care Centre: Type “NCC<space>City Name” and send it to 55555* (e.g. NCC DELHI).
2. To book an Appointment with Nokia Care Centre, visit http://www.nokia.co.in/appointment
3. Online Support: http://www.nokia.co.in/support
4. Protect your Nokia Device -Buy Nokia Extended Warranty by visiting the nearest Nokia Care Centre.
5. Warranty Terms & Conditions: http://www.nokia.com/in-en/support/manufacturer-s-limited-warranty/
*Premium SMS charges apply -
hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
Binary addition,subtraction and modulus...plz help urgent
plz help me on this query...
i need to pass two 512 bit number as string,then convert them to binary and
then perform binary addition,subtraction,modulus operations on those two numbers.finally convert result to integer.
i designed a code which doesnt work correct.it is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package bytearrayopeations;
import java.math.BigInteger;
* @author sheetalb
public class binaryadding {
public static void main(String[] args) {
BigInteger a = new BigInteger("123456");
BigInteger b = new BigInteger("5121");
String bb1 = a.toString(2);
String bb2 = b.toString(2);
String ss1 = null;
String ss2 = null;
String result = "";
String carry="0";
System.out.println("first value=" +bb1);
System.out.println("second value=" +bb2);
int k=bb1.length();
int h=bb2.length();
System.out.println("length 1="+ k);
System.out.println("length 2=" +h);
int p=h-k;
//System.out.println("difference=" +p);
int q=k-h;
//System.out.println("difference 2=" +q);
if(h==k)
else if(h>k)
for(int i=0;i<p;i++)
bb1="0"+bb1;
System.out.println("new value of first=" +bb1);
else if(h<k)
for(int i=0;i<q;i++)
bb2="0"+bb2;
System.out.println("new value of second=" +bb2);
StringBuffer sb1=new StringBuffer(bb1);
StringBuffer sb2=new StringBuffer(bb2);
bb1=sb1.reverse().toString();
bb2=sb2.reverse().toString();
//System.out.println("rev. buffer1=" +bb1);
//System.out.println("rev. buffer2=" +bb2);
for(int i=0;i<bb1.length();i++)
ss1=bb1.substring(i,i+1);
ss2=bb2.substring(i,i+1);
System.out.println("value1=" + ss1 + " " + "value2=" + ss2);
if (ss1.equals("0") && ss2.equals("0"))
if (carry.equals("0"))
result+="0";
else
result+="1";
else if (ss1.equals("1") && ss2.equals("1"))
if (carry.equals("0"))
result+="0";
carry="1";
else
result+="1";
carry="1";
else if (ss1.equals("0") && ss2.equals("1"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
else if (ss1.equals("1") && ss2.equals("0"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
System.out.println("sum=" +result + " " + "carry" + carry);
result+=carry;
StringBuffer sb3=new StringBuffer(result);
result=sb3.reverse().toString();
System.out.println("result is " +result);
System.out.println("Binary = "+ result + ", Decimal = "+Integer.parseInt(result,2));
}plz provide me or email me if possible java coding for all three operations as soon.
[email protected]One thread is enough. Continue here:[http://forums.sun.com/thread.jspa?threadID=5373720&messageID=10643157#10643157]
-
Hi all,
i attended a interview, these are the qes..plz help me with ans..
1. is it possible without using function modules in
bdc(open, insert,close) data transferring? how ...
2. which one is better session/call transection? why?
3. in LSMW what r the methods u r using?
4. in LSMW otherthan recording any method is there? what are they?
5. in LSMW where are u doing field validation? in which step, can u explain?
6. is it possible to run smartform without using
" ssf_function_module_name", how ?
7. how will display secondary list in ALV.
8. how will u call back to secondary lists to base list?
9. how u r printing secondary list in interactive reports?
10. what are the events used in u r ALV reports?
11. how will u access data in secondary list?
12. what is diff b/w bapi created fm and standered bapi fm?
13. in ALE in which programm worked either standalone or any other?
here what is standalone?i know change pointer..Hi
10. what are the events used in u r ALV reports?
Events in alv and their FM The main events in alv and their FM and why we use these:
1. SLIS_PRINT_ALV.
2. SLIS_T_LISTHEADER.
3. SLIS_T_EVENT.
4. SLIS_T_SORTINFO_ALV.
5. SLIS_T_LAYOUT_ALV.
6. SLIS_T_FIELDCAT_ALV.
and in classic reports what is the sequence of events: === Events are
At selection-screen output.
Initialization.
At selection-screen on field
At selection-screen on end of field
At selection-screen on Radiobutton Group R1. (If you have any radio buttons)
At selection-screen on block b1. (If you have any blocks)
Start-of-selection.
Get node. (if the data is retreived from a logical database)
Get node late. (if the data is retreived from a logical database)
Top-of-page. (if the write statement is in the end-of-selection event or we can say that before the first write statement)
end-of-selection.
and fuction modules are
LISTHEADER - Is used to print the header information in the ALV List. Name, Date, Time, ALV Name and other details are called as Header information. EVENT - Basically this is the FM to handle Event's. When the user needs to do some event operation like when double clicking the a particular field we need to perform some operation. These events are captured by this FM. LAYOUT - This FM is used to define the layout of the List. There are many options available in this FM to define the Layout style. FIELDCAT - These are used to populate the List header. We can change them according to our req.
User-defined Text Output Event
Application
print_end_of_list
Define output text to be printed at the end of the entire list
print_top_of_list
Define output text to be printed at the beginning of the entire list
print_end_of_page
Define output text to be printed at the end of each page
print_top_of_page
Define output text to be printed at the beginning of each page
subtotal_text
Define self-defined subtotals texts
Mouse-controlled Actions in the Grid Control Event
Application
button_click
Query a click on a pushbutton in the ALV Grid Control
double_click
Query a double-click on a cell of the ALV Grid control
hotspot_click
Query a hotspot click on columns defined for this purpose in advance
onDrag
Collect information when elements of the ALV Grid Control are dragged
onDrop
Process information when elements of the ALV Grid Control are dropped
onDropComplete
Perform final actions after successful Drag&Drop
onDropGetFlavor
Distinguish between options for Drag&Drop behavior
Processing of Self-defined and Standard Functions Event
Application
before_user_command
Query self-defined and standard function codes
user_command
Query self-defined function codes
after_user_command
Query self-defined and standard function codes
Definition of Self-defined Functions Event
Application
toolbar
Change, delete or add GUI elements in the toolbar
menu_button
Define menus for menu buttons in the toolbar
context_menu_request
Change context menu
onf1
Define self-defined F1 help
All of these can be found under type group SLIS.
Events
SLIS_EV_ITEM_DATA_EXPAND TYPE SLIS_FORMNAME VALUE 'ITEM_DATA_EXPAND',
SLIS_EV_REPREP_SEL_MODIFY TYPE SLIS_FORMNAME VALUE 'REPREP_SEL_MODIFY', SLIS_EV_CALLER_EXIT_AT_START TYPE SLIS_FORMNAME VALUE 'CALLER_EXIT',
SLIS_EV_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
SLIS_EV_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
SLIS_EV_DATA_CHANGED TYPE SLIS_FORMNAME VALUE 'DATA_CHANGED',
SLIS_EV_TOP_OF_COVERPAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_COVERPAGE',
SLIS_EV_END_OF_COVERPAGE TYPE SLIS_FORMNAME VALUE 'END_OF_COVERPAGE',
SLIS_EV_FOREIGN_TOP_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_TOP_OF_PAGE', SLIS_EV_FOREIGN_END_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_END_OF_PAGE',
SLIS_EV_PF_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
SLIS_EV_LIST_MODIFY TYPE SLIS_FORMNAME VALUE 'LIST_MODIFY',
SLIS_EV_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
SLIS_EV_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
SLIS_EV_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
SLIS_EV_AFTER_LINE_OUTPUT TYPE SLIS_FORMNAME VALUE 'AFTER_LINE_OUTPUT', SLIS_EV_BEFORE_LINE_OUTPUT TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE_OUTPUT',
SLIS_EV_SUBTOTAL_TEXT TYPE SLIS_FORMNAME VALUE 'SUBTOTAL_TEXT' -
Hi,
i m using bb torch 9800,i installed viber app from bbworld .During instalation, it automaticaly went for restart.n till now it is rebooting everytime after every70% complition. its just like a do loop.
1.i removed battery so many times kept back..but no way.
2.i tried to start with safe mode for rebooting,but that also doesn't work.
3.charged battery fully ,then inserted,stilll same condition.
what to do? no way .i tried my best with these ideas what i got here on this foram,but didnt work.thats why i m writing seperately..PLZ HELP ,I M HELPLESS FROM LAST 7 DAYS...sorry bout the delay you can follow these instructions
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Plz help me out with for all entries
hi to all experts,
This is my sample code plz tell me how to output the data.plz help me out.im very much beginner in ABAP and i dont want to use loop and endloop is there any way
REPORT Z_FORALLENTERIES .
types : begin of ty_lfa1,
lifnr type lfa1-lifnr,
name1 type lfa1-name1,
land1 type lfa1-land1,
end of ty_lfa1.
types : begin of ty_lfb1 ,
lifnr type lfb1-lifnr,
bukrs type lfb1-bukrs,
pernr type lfb1-pernr,
end of ty_lfb1.
types : begin of ty_lfc1 ,
lifnr type lfc1-lifnr,
gjahr type lfc1-gjahr,
usnam type lfc1-usnam,
end of ty_lfc1.
types : begin of ty_lfbk ,
lifnr type lfbk-lifnr,
banks type lfbk-banks,
bankl type lfbk-bankl,
bankn type lfbk-bankn,
end of ty_lfbk.
types : begin of ty_final,
lifnr type lfa1-lifnr,
name1 type lfa1-name1,
land1 type lfa1-land1,
bukrs type lfb1-bukrs,
pernr type lfb1-pernr,
gjahr type lfc1-gjahr,
usnam type lfc1-usnam,
banks type lfbk-banks,
bankl type lfbk-bankl,
bankn type lfbk-bankn,
end of ty_final.
data : it_lfa1 type standard table of ty_lfa1 initial size 0 with header line.
data : it_lfb1 type standard table of ty_lfb1 initial size 0 with header line.
data : it_lfc1 type standard table of ty_lfc1 initial size 0 with header line.
*--internal for outputting data--
data : it_lfbk type standard table of ty_lfbk initial size 0 with header line.
data : it_final type standard table of ty_final initial size 0,
wa_final like line of it_final.
select lifnr name1 land1
into table it_lfa1[]
from lfa1 up to 10 rows.
if it_lfa1[] is not initial.
select lifnr bukrs pernr
into table it_lfb1[]
from lfb1
for all entries in it_lfa1[]
where lifnr eq it_lfa1-lifnr.
endif.
if it_lfb1[] is not initial.
select lifnr gjahr usnam
into table it_lfc1[]
from lfc1
for all entries in it_lfb1[]
where lifnr eq it_lfb1-lifnr.
endif.
if it_lfc1[] is not initial.
select lifnr banks bankl bankn
into table it_lfbk[]
from lfbk
for all entries in it_lfc1[]
where lifnr eq it_lfc1-lifnr.
endif.Hi
see this program almost same req
**************DATA TYPES DECLARATION **********************
TABLES: HRP1001, HRP1026, HRP1000,PCHDY.
TYPE-POOLS SLIS.
TYPES :BEGIN OF ST_OUTPUT,
COUNT TYPE STRING,
OBJID TYPE HRP1001-OBJID,
STEXT TYPE HRP1000-STEXT,
BEGDA TYPE HRP1000-BEGDA,
ENDDA TYPE HRP1000-ENDDA,
CANCRT TYPE T77CRT-CANCRT,
AEDTM TYPE HRP1026-AEDTM,
UNAME TYPE HRP1026-UNAME,
LSTEXT TYPE HRP1000-STEXT,
RINVT TYPE T777V-RINVT,
END OF ST_OUTPUT.
TYPES: BEGIN OF ST_HRP1000,
OBJID TYPE HRP1001-OBJID,
STEXT TYPE HRP1000-STEXT,
END OF ST_HRP1000.
TYPES : BEGIN OF ST_HRP1001,
OTYPE TYPE HRP1001-OTYPE,
OBJID TYPE HRP1001-OBJID,
RELAT type hrp1001-RELAT,
BEGDA TYPE HRP1001-BEGDA,
ENDDA TYPE HRP1001-ENDDA,
SCLAS TYPE HRP1001-SCLAS,
SOBID TYPE HRP1001-SOBID,
END OF ST_HRP1001.
TYPES : BEGIN OF ST_HRP1026,
OTYPE TYPE HRP1026-OTYPE,
OBJID TYPE HRP1001-OBJID,
AEDTM TYPE HRP1026-AEDTM,
UNAME TYPE HRP1026-UNAME,
DELET TYPE HRP1026-DELET,
CANCR TYPE HRP1026-CANCR,
END OF ST_HRP1026.
TYPES : BEGIN OF ST_REASON,
CANCR TYPE HRP1026-CANCR,
CANCRT TYPE T77CRT-CANCRT,
END OF ST_REASON.
TYPES : BEGIN OF ST_SOBID,
OTYPE TYPE HRP1001-OTYPE,
OBJID TYPE HRP1001-OBJID,
RELAT type hrp1001-OBJID,
BEGDA TYPE HRP1001-BEGDA,
ENDDA TYPE HRP1001-ENDDA,
SCLAS TYPE HRP1001-SCLAS,
SOBID TYPE HRP1001-OBJID,
END OF ST_SOBID.
TYPES : BEGIN OF ST_OBJID,
OBJID TYPE HRP1001-OBJID,
END OF ST_OBJID.
TYPES : BEGIN OF ST_LOCATION,
OTYPE TYPE HRP1001-OTYPE,
OBJID TYPE HRP1001-OBJID,
RSIGN TYPE HRP1001-RSIGN,
RELAT TYPE HRP1001-RELAT,
SCLAS TYPE HRP1001-SCLAS,
SOBID TYPE HRP1001-SOBID,
END OF ST_LOCATION.
TYPES : BEGIN OF ST_LOCATION1,
OTYPE TYPE HRP1001-OTYPE,
OBJID TYPE HRP1001-OBJID,
RSIGN TYPE HRP1001-RSIGN,
RELAT TYPE HRP1001-RELAT,
SCLAS TYPE HRP1001-SCLAS,
SOBID TYPE HRP1001-OBJID,
END OF ST_LOCATION1.
TYPES : BEGIN OF ST_LSTEXT,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
LSTEXT TYPE HRP1000-STEXT,
END OF ST_LSTEXT.
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
DATA : IT_LSTEXT TYPE STANDARD TABLE OF ST_LSTEXT. "TOS STORE THE TEXT OF COURCE LOCATION
DATA : WA_LSTEXT TYPE ST_LSTEXT.
DATA : IT_LOCATION TYPE STANDARD TABLE OF ST_LOCATION. " TO STORE THE LOCATION OF COURCE
DATA : WA_LOCATION TYPE ST_LOCATION.
DATA : IT_LOCATION1 TYPE STANDARD TABLE OF ST_LOCATION1. " TO CONVERT SOBID INTO OBJID FOR COURCE LOCATION
DATA : WA_LOCATION1 TYPE ST_LOCATION1.
DATA : IT_SOBID TYPE STANDARD TABLE OF ST_SOBID. " TO CHANGE THE SOBID OF HRP1001 TO OBJID OF HRP1026
DATA : WA_SOBID TYPE ST_SOBID. " BY USING FOR ALL ENTRIES
DATA : IT_REASON TYPE STANDARD TABLE OF ST_REASON. "TO STORE T HE REASON FOR CANCELL TEXT
DATA : WA_REASON TYPE ST_REASON.
DATA : IT_OUTPUT TYPE STANDARD TABLE OF ST_OUTPUT. "OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT TYPE ST_OUTPUT.
DATA : IT_OUTPUT_1 TYPE STANDARD TABLE OF ST_OUTPUT. " TEMP OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT_1 TYPE ST_OUTPUT.
DATA : IT_HRP1000 TYPE STANDARD TABLE OF ST_HRP1000. "DATA FROM HRP1000 TABLE
DATA : WA_HRP1000 TYPE ST_HRP1000.
DATA : IT_HRP1001 TYPE STANDARD TABLE OF ST_HRP1001. "DATA FROM HRP1001 TABLE
DATA : WA_HRP1001 TYPE ST_HRP1001.
DATA : IT_HRP1026 TYPE STANDARD TABLE OF ST_HRP1026. "DATA FROM HRP1026 TABLE
DATA : WA_HRP1026 TYPE ST_HRP1026.
DATA : IT_OBJID TYPE STANDARD TABLE OF ST_OBJID. " TO STORE THE OBJID OF HRP1001
DATA : WA_OBJID TYPE ST_OBJID.
DATA: WS_FCAT TYPE SLIS_FIELDCAT_ALV . " FEILDCATALOG FOR ALV REPORT
DATA: IN_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : LV_COUNT TYPE I. "FEILD FOR SERIAL NUMBER
***************************END OF DATA DECLARATION******************************************
***********SELECTION SCREEN DESIGN***********************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
**********END OF SELECTION SCREEN DESIGN*****************
*****INITIALIZATION VENT TO ASIGN DEFAULT VALUES TO OTYPE
*INITIALIZATION.
S_OTYPE-LOW = 'D'.
S_OTYPE-SIGN = 'I'.
S_OTYPE-OPTION = 'EQ'.
APPEND S_OTYPE.
CLEAR S_OTYPE.
*************END OF EVENT INITIALIZATION*****************
*********VALIDATION FOR SCREEN FIELDS********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA.' TYPE 'E'.
ENDIF.
ENDIF.
REFRESH IT_OBJID.
***************VALIDATION OF SCREEN FIELDS ENDS***********
*****************START OF SELECTION ************************
START-OF-SELECTION.
SELECT OTYPE
OBJID
RELAT
BEGDA
ENDDA
SCLAS
SOBID FROM HRP1001 INTO TABLE IT_HRP1001
WHERE OTYPE = 'D'
AND OBJID IN S_OBJID
AND BEGDA GE DATE-LOW
AND ENDDA LE DATE-HIGH
AND ( SCLAS = 'E' OR SCLAS = 'ET' ).
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOP AT IT_HRP1001 INTO WA_HRP1001.
WA_SOBID-OTYPE = WA_HRP1001-OTYPE.
WA_SOBID-OBJID = WA_HRP1001-OBJID.
WA_SOBID-RELAT = WA_HRP1001-RELAT.
WA_SOBID-BEGDA = WA_HRP1001-BEGDA.
WA_SOBID-ENDDA = WA_HRP1001-ENDDA.
WA_SOBID-SCLAS = WA_HRP1001-SCLAS.
WA_SOBID-SOBID = WA_HRP1001-SOBID.
APPEND WA_SOBID TO IT_SOBID.
ENDLOOP.
SELECT OTYPE
OBJID
AEDTM
UNAME
DELET
CANCR
NCONT
FROM HRP1026
INTO TABLE IT_HRP1026
FOR ALL ENTRIES IN IT_SOBID
WHERE OBJID = IT_SOBID-SOBID
AND ( OTYPE = 'E' OR OTYPE = 'ET' )
AND DELET = 'X' AND
BEGDA GE DATE-LOW AND
ENDDA LE DATE-HIGH.
IF SY-SUBRC EQ 0.
SELECT OBJID
STEXT
FROM HRP1000
INTO TABLE IT_HRP1000
FOR ALL ENTRIES IN IT_SOBID
WHERE OBJID = IT_SOBID-SOBID AND
BEGDA GE DATE-LOW AND
ENDDA LE DATE-HIGH.
SELECT CANCR
CANCRT
FROM T77CRT
INTO TABLE IT_REASON
FOR ALL ENTRIES IN IT_HRP1026
WHERE CANCR = IT_HRP1026-CANCR
AND LANGU = 'E' .
********PERFORM FOR GETTING T HE LOCATION OF THE COURCE**
PERFORM GET_LOCATION.
**************END OF LOCATION OF COURCE ******************
ELSE.
MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
*****PERFORM FOR GETTING DATA INTO THE FINAL INTERNAL TABLE IT_OUTPUT**
PERFORM GET_DATA.
*********************************END OF PERFORM ET DATA ***************
***********LOGIC FOR PRONTING NUMBER OF RECORDS ***********************
LV_COUNT = 0.
LOOP AT IT_OUTPUT INTO WA_OUTPUT.
LV_COUNT = LV_COUNT + 1.
WA_OUTPUT-COUNT = LV_COUNT.
APPEND WA_OUTPUT TO IT_OUTPUT_1.
ENDLOOP.
REFRESH IT_OUTPUT.
IT_OUTPUT = IT_OUTPUT_1.
********************END OF LOGIC FOR NUMBER OF RECORDS ***************
****************DISPLAYING OUTPUT BY USEING GRID DISPLAY**********
PERFORM ALV_DISPLAY.
****************************END OF PERFORM FOR DISPLAYING **********
*& Form PERFORM_ALV
DISPLAY THE RECORDS IN ALV GRID FORMAT.
FORM ALV_DISPLAY.
PERFORM FIELD_CATALOG USING 'COUNT' 'Sr. No.'.
PERFORM FIELD_CATALOG USING 'OBJID' 'COURCE ID.'.
PERFORM FIELD_CATALOG USING 'STEXT' 'COURCE NAME'.
PERFORM FIELD_CATALOG USING 'LSTEXT' 'COURCE LOATION'.
PERFORM FIELD_CATALOG USING 'BEGDA' 'BEGIN DATE '.
PERFORM FIELD_CATALOG USING 'ENDDA' 'END DATE '.
PERFORM FIELD_CATALOG USING 'CANCRT' 'REASON'.
PERFORM FIELD_CATALOG USING 'AEDTM' 'DATE Of CANCEL'.
PERFORM FIELD_CATALOG USING 'NCONT' 'NUMBER OF BOOKINGS'.
PERFORM FIELD_CATALOG USING 'LOCTX' 'COURCE LOCATION'.
PERFORM FIELD_CATALOG USING 'UNAME' 'WHO CANCELLED'.
PERFORM FIELD_CATALOG USING 'LSTEXT' 'COURCE LOATION'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'IT_OUTPUT'
I_GRID_TITLE = ' Cancelled courses with reason '
IT_FIELDCAT = IN_FCAT
TABLES
T_OUTTAB = IT_OUTPUT.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "PERFORM_ALV
*& Form FIELD_CATALOG
text
-->FIELD_NAME text
-->DIS_TEXT text
FORM FIELD_CATALOG USING FIELD_NAME DIS_TEXT.
CLEAR WS_FCAT.
WS_FCAT-TABNAME = 'IT_OUTPUT'.
WS_FCAT-FIELDNAME = FIELD_NAME.
WS_FCAT-SELTEXT_M = DIS_TEXT.
APPEND WS_FCAT TO IN_FCAT .
ENDFORM. "FIELD_CATALOG
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
*sort it_sobid by objid.
LOOP AT IT_SOBID INTO WA_SOBID." where otype eq s_otype and objid eq s_objid.
READ TABLE IT_HRP1026 WITH KEY OBJID = WA_SOBID-SOBID OTYPE = WA_SOBID-SCLAS INTO WA_HRP1026.
IF SY-SUBRC EQ 0.
READ TABLE IT_HRP1000 WITH KEY OBJID = WA_SOBID-SOBID INTO WA_HRP1000.
READ TABLE IT_REASON WITH KEY CANCR = WA_HRP1026-CANCR INTO WA_REASON.
WA_OUTPUT-OBJID = WA_HRP1026-OBJID.
WA_OUTPUT-BEGDA = WA_SOBID-BEGDA.
WA_OUTPUT-ENDDA = WA_SOBID-ENDDA.
WA_OUTPUT-AEDTM = WA_HRP1026-AEDTM.
WA_OUTPUT-UNAME = WA_HRP1026-UNAME.
WA_OUTPUT-NCONT = WA_HRP1026-NCONT.
READ TABLE IT_HRP1000 WITH KEY OBJID = WA_SOBID-SOBID INTO WA_HRP1000.
WA_OUTPUT-STEXT = WA_HRP1000-STEXT.
READ TABLE IT_REASON WITH KEY CANCR = WA_HRP1026-CANCR INTO WA_REASON.
WA_OUTPUT-CANCRT = WA_REASON-CANCRT.
CLEAR WA_REASON-CANCRT.
READ TABLE IT_LOCATION1 WITH KEY OBJID = WA_HRP1026-OBJID INTO WA_LOCATION1..
READ TABLE IT_LSTEXT WITH KEY OBJID = WA_LOCATION1-SOBID OTYPE = 'F' INTO WA_LSTEXT.
WA_OUTPUT-LSTEXT = WA_LSTEXT-LSTEXT.
CLEAR WA_LSTEXT-LSTEXT.
APPEND WA_OUTPUT TO IT_OUTPUT.
CLEAR WA_OUTPUT.
CLEAR WA_OUTPUT-CANCRT.
ENDIF.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form GET_LOCATION
text
--> p1 text
<-- p2 text
FORM GET_LOCATION .
SELECT OTYPE
OBJID
RSIGN
RELAT
SCLAS
SOBID
FROM HRP1001
INTO TABLE IT_LOCATION
FOR ALL ENTRIES IN IT_HRP1026
WHERE OTYPE = 'E' AND OBJID = IT_HRP1026-OBJID
AND RSIGN = 'A' AND RELAT = '024' AND SCLAS = 'F'
AND BEGDA GE DATE-LOW AND ENDDA LE DATE-HIGH.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD FOUND FOR THE GIVEN SELECTION CRITERIA ' TYPE 'E'.
ENDIF.
LOOP AT IT_LOCATION INTO WA_LOCATION.
WA_LOCATION1-OTYPE = WA_LOCATION-OTYPE.
WA_LOCATION1-OBJID = WA_LOCATION-OBJID.
WA_LOCATION1-RSIGN = WA_LOCATION-RSIGN.
WA_LOCATION1-RELAT = WA_LOCATION-RELAT.
WA_LOCATION1-SCLAS = WA_LOCATION-SCLAS.
WA_LOCATION1-SOBID = WA_LOCATION-SOBID.
APPEND WA_LOCATION1 TO IT_LOCATION1.
CLEAR WA_LOCATION1.
ENDLOOP.
SELECT OTYPE
OBJID
STEXT
FROM HRP1000
INTO TABLE IT_LSTEXT
FOR ALL ENTRIES IN IT_LOCATION1
WHERE OBJID = IT_LOCATION1-SOBID
AND OTYPE = 'F'.
AND BEGDA GE DATE-LOW
AND ENDDA LE DATE-HIGH.
ENDFORM. " GET_LOCATION
<b>Reward if usefull</b>
Maybe you are looking for
-
OIM 9.0.1.1 on Weblogic Failing
My installation is failing and I cannot seem to get to the bottom of it. Any pointers / help here is appreciated. XIMDD does not report any problem prior to running the installation. The database operations all seem to occur successfully, but there a
-
WBS Field in Asset Master Record
Hi All, Currently we are working in 4.6 C version. The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent. The standard functionality is available in ECC6 Could some body
-
Will my LG GBW-H20L work in the new Mac Pro?
I've got an LG GBW-H20L Blu Ray drive in my Vista machine, but am looking to get the new Mac Pro. I was wondering if I could move my LG into the Mac Pro with no problem? I've read some posts that mention an IDE to SATA converter, but this drive is al
-
please help me mirror using airplay
-
Need BootCamp Drivers for Windows Vista!
Hi Guys, I lost my bootcamp installation disk for the Windows Drivers. I have OSX 10.6.3 and boot camp 3.0.2 on an imac G5 Intel duo. Please help me, I need drivers for Windows Vista . Thanks