Plz help! no more preview
Hi guys
I recently relocate tons of picture to order my library....and now i found out a very big issue!
almost 30% of my pics (radomly) have no more preview in the browser (see only a dotted white frame) and when i use full screen mode i get a full gray monochrome
However when i apply any change i can see the full image !! at its definition !! and also the metadata give not any mistake to me, the images are well located in full size...
What could i do to have back my photos!?
two things to try ...
first, select all images via Edit -> Select All or command+a ... then Images -> Generate Thumbnails ...
if that doesn't work, then rebuild aperture library ...
quit aperture, restart while holding command+option, answer yes to rebuild question ...
Similar Messages
-
I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S
This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway. -
C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple. -
Which is the best for me?plz help me .I've more confusing about my Career.
I've done B.E Computer Science and Engineering year of 2013. Currently i'm doing IT-Support Engineer job. I've only 7 months experience. But i know how to install,Mounting of the blade server.but i don't know about windows servers.but i can install server
OS.i have lot of confusion and fear also,about my career.which is suitable for me?plz help me.frnds.Hi, Ravi.
Based on your experience, you may want to start working your way to earning an MCSA for Windows Server 2012 R2. It requires you to pass three exams. The first exam you may want to take on is 70-410 which is on install Windows Server 2012.
Here is the MCSA: Windows Server 2012 certification title description:
http://www.microsoft.com/learning/en-us/mcsa-windows-server-certification.aspx
As you can see, it will require you to pass three exams. Here they are:
70-410 Installing and Configuring Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-410.aspx
70-411 Administering Windows Server 2012
http://www.microsoft.com/learning/en-us/exam-70-411.aspx
70-412 Configuring Advanced Windows Server 2012 Services
http://www.microsoft.com/learning/en-us/exam-70-412.aspx
Microsoft offers free online training through different web sites. Consider these as a few of the many resources you can use to study for these exams.
TechNet
http://technet.microsoft.com/en-US/
Microsoft Virtual Academy
http://www.microsoftvirtualacademy.com/
By the way - if you are still in school and prefer a more entry-level certification, you can also consider the MTA certification track designed for college students:
http://www.microsoft.com/learning/en-us/mta-certification.aspx
Good luck!
Best wishes, Davin Mickelson -
Help Me Plz, I got more then one error in my GB
hey all,
i have more then one error in my GB '08
First when i turn my GB, it always give me this error
*File \U201Ccom.apple.garageband.cs\U201D is not a GarageBand †T;†» File!*
What is this :(??
Second i cannot import audio files to my GB now, i don't no why it was work fine last week !!
and when i quit my GB it take a long time and then give me another error like Report, ignore, relaunch.. etc, anyway this is the msg i copy it:
*The application GarageBand quit unexpectedly*
*Mac OS X and other applications are not affected .. etc*
anyone have the same problem ?
and plz help me
Thanks
xxx
+p.s. : i try http://www.bulletsandbones.com/GB/GBFAQ.html#mp3wontimport for import file to my GB, But it doesn't work xD ..+arrgh, I've got the same issue when i open garageband: "File \U201Ccom.apple.garageband.cs\U201D is not a GarageBand †‰-†» File!"
then when I exit garageband, garageband locks up, and I have to force quit every time... anyone??? -
i deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!
You need to restore the folder using the (Put back) selection (CTRL click).
-
In my smart form why main's content din't display in print preview?Plz help
In my smart form why main's content din't display in print preview?Plz help me.
Regards
Indu
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again.
Edited by: Thomas Zloch on Jan 5, 2011 3:27 PMmake sure u've specified da style in output options of text element as
TIMES 10 in style field and select da desired paragraph and charcter format in general attributes tab of da text element.activaTE AND CHECK.
if problem still persists u can ask again.
reward points if it helps. -
MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many simply will not read such posts.
Enter & Exit iPhone Recovery Mode -
I have recently updated m iPhone 4 which was not used since months. It has to be updated from5.1.4 to iOS 7.0.4 and it has taken more than 15 hours to get started. Plz help me. It took about 5 to 6 hrs to prepare for updating.
I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
It's froze my ipad messages app. Plz help tell me what to do.
You can backup the iPad and then do a restore to factory condition which will completely wipe it: Settings > General > Reset > Erase All Content and Settings. But, before doing that remember, it completely erases everything.
You then have to restore from a backup...if you have a backup from before the bad message, you can use that and be fine. If not, you would be better off setting up the iPad as new and then redownload your apps and music...you can do that by going to the app store and itunes and tap the Purchases button and redownload everything.
You will loose your photos and email, and such in the process, however. If you have iCloud, put the photos in PhotoStream and then use that to put them back on the iPad.
Without a good backup from just before the bad message, erasing is going to cause you a lot of work. -
My hp v155w give I/0 error. its capacity is 8 gb but it cannot take more than 3 gb..plz help me
my hp v155w gives I/0 error. when i format it with hp format utility a quick format has succefully done.,,, but when i tries to full format.. it has not done and show the error as I/0 error, 0x1ac00000 error or autometicallly reject and write protected. another problem is that when i copy or transffer data from pc to it ,it takes ony l less than 4gb but it has a capacity of 8 gb... plz help me
arrgh, I've got the same issue when i open garageband: "File \U201Ccom.apple.garageband.cs\U201D is not a GarageBand †‰-†» File!"
then when I exit garageband, garageband locks up, and I have to force quit every time... anyone??? -
Plz Help me put navigation menu on my front page, but a good one......
Hi ive used spryware ive used normal typing but my navigation bar is awful how can i can create a good one ?
Another thing is ive made the spyware navigation menu bar horizontal but when i load it up on my ftp files for the internet it ends up going vertical with bullet points, plz help.........
In my dreamweaver it previews like its suppose to be but when i load it on the internet public html it doesnt show it horizontally.
thanks for anyone who can help
Ive also attached the fileDid you upload your CSS and javascript files to the server? We would need to see a link to your live page on server to give more meaningful feedback.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Issue with tables :( Plz Help!
Hey all!
Never posted before on this forum and pretty new with
dreamweaver. So I'm having the strangest issue with dreamweaver
tables. I bought a template that I'm modifying by my self which
isnt all that hard haha. But Here's what I ran into. Whenever I put
one table and then another one under it and another one under it
and I insert txt or pics in there and save it, after I upload it
and preview it, I can only see the info from the first table.
Everything else under it, wont show up.
So no matter where and on what page I do it from that
template, if I put more than 1 table down, it'll only show the info
from the first and top table and everything else in other tables
under it, wont show up at all (after I upload it) even thou it
looks good on dreamweaver itself :(
Is there an option to enable or disable something? Plz help,
thank you all!"Unknown7" <[email protected]> wrote:
> So no matter where and on what page I do it from that
template, if I put more
>than 1 table down, it'll only show the info from the
first and top table and
>everything else in other tables under it, wont show up at
all :(
>
> Is there an option to enable or disable something? Plz
help, thank you all!
The bad news is that if you want to do anything remotely
complicated with
Dreamweaver you will have to learn a fair amount about HTML.
I would virtually
guarantee that when you put your new table in something is
going wrong so that
one or other table is not being defined correctly.
As you are modifying someone else's template there is
virtually no way to find
out what is happening other than to examine the HTML. It is
unlikely that
fiddling with any Dreamweaver settings will make any
difference.
Every table should start with something like:
<table width="100%" border="0" cellspacing="0"
cellpadding="5"
bgcolor="#e0e0ff">
<tr align="center" valign="middle">
<td width="9%"><a href="#Bottom">
and end with:
</td>
</tr>
</table>
You can have more or less as many columns as you like in a
table, (<td> ...
</td>
And more or less as many rows ( <tr><td> ...
</td></tr>) as you like, but
unless you get up to special tricks you should have the same
number of columns
in every row. You can put anything you like -- images, more
tables, whatever --
inside a cell e.g.:
<td> image, blah, table </td>,
but you mustn't put any content anywhere else, and every
opening definition
(<table>, <tr>, <td> must have a matching
closing definition in the correct
order.
You can nest tables more or less indefinitely, but
Dreamweaver Design View
sometimes blows its top if you go more than three deep.
HTML usually doesn't produce any error messages, but the
effect of omitting any
of the steps in building a page is quite unpredictable.
Sometimes a major error
will not produce any visible effect, but on other occasions a
minor error will
send the page completely haywire.
You may care to have a look at:
http://www.corybas.com/Technical/Wrapping.htm
This has a series of demonstration pages illustrating what
happens when you try
to display increasingly complicated page layouts on narrow
screens.
Once you have learnt to interpret HTML, you can often learn a
lot by inspecting
the source code for the page (in IE click view, then Source).
This works with
anybody's page, so you can look at the source code for my
pages if you wish.
Clancy -
Error while opening a module. plz help me, very urgent.
when i try to open a module, the following error message appears on my screen.
" no j2ee component found in d:\krisp\programs\servlets".
i've installed bea in c: drive and my servlet program is in d: drive.
plz help me, it's very urgent.Can you provide some more information? What were you doing when this happened?
Can you post the entire error message?
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi 223 KBRami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn
Maybe you are looking for
-
How can i fix my itunes because it wont open because of (-50)?
i have tried unstalling it and then installing it again yet it still wont open.
-
My iPod is not responding when I connect it to my PC. What Should I do?
I have been trying to connect my iPod to ny computer so that I can sync music to it, but it's not responding. I tried all the steps on the apple website & it still doesn't work. I have a 3rd genereation iPod touch.
-
How to display a picture like instruction?
I'm want to display a pciture like working instruction before or after the UUT serial number input dialog,how to make the step ?
-
Getting an image path & display an image in JSp
hi How to get image & particular image path stored in Database .in Jsp [ Image stored in anther drive ( D:\images) ] & my webroot dir in c:\apachetomcat\webapps.... Any Help will be Appriciated [email protected]
-
How do I roll back to an earlier version? 11.1 is just too buggy -- I don't like the way it displays podcasts, and I can't add files (.mp3's) or folders.