Plz help withen 5 min,how 2 call MS.World doc

friends there is a problum....
My team lead give me assignment 2 open a MS.Word Doc file from form 61 in windows environment
plz help me what can i do.

what do you want exactly?
open the word-document per host-command? It's easy, when you know the paths and the word-documents.
or in web with the client_host-command.
If you want to interact with the word, then you should create a channel to the document via OLE2 or client_OLE2 - packages. There are many examples here in the forum. Search for word and ole2.
try it
Gerd

Similar Messages

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

HT1212 i have forgot may passcode plz help me ... how to open it?

i have forgot may passcode plz help me ... how to open it?

Read here:
http://support.apple.com/kb/ht1212
You will most likely have to follow the directions to force the phone into recovery mode & restore it. This will remove the passcode.

Plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help

plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help

If the reset doesn't work, you have to force iPad into Recovery Mode
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Plz help don't know how to create a query and link it to a UDF

hi,
i am new to business one and however hard i am trying to use a query to link it to a UDF, it is not working. i think i am doing the whole thing wrong,so ill just post one problem i have and if any one of u can explain to me in steps i may be able to learn to link other queries and UDFs.so plz help me out .
problem:
i want to display the account balance of every customer/vendor whenvever i open a marketing document. i have created a UDF for the marketing documents in the title with name and description 'account balance'.
Now how do i link the customer/vendor name field to this UDF so that the query generated will show the account balance of the corresponding customer/vendor.plz tell me in steps as to what tables to choose ,what fields to choose, what conditions and relatoins to use in a query wizard
thank you

hi,
A/R invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
A/P invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
FOR OTHER FORMS ONLY CHANGE THE END OF THE QUERY FOR Example
$[OPCH.CardCode]
OPCH is the table name, change it to other table.
save the query and set it to customer code for refresh in A/R invoice
save the query and set it to Vendor code for refresh in A/P invoice
regards
sandip

Need help for my project(how to call function in ancestor object)

dear all, i need your help for my project.My problem is stated as follow:
say i have a class call frameA and frameB, both of them are extend from
JFrame, frameA structure can be described briefly as follow:
//frameA.java
public class frameA extends JFrame{
private frameB fb;
public frameA()
fb=new frameb();
show();
public void func()
JOptionPane.showMessageDialog(null,"OK");
now, my problem raised, after frameA and fb is created, how can i access the ancestor object(which is frameA) within fb's code,
what should i add inside frameB? i need the answer urgently......
thanx a lot!!!
cheers

Hi,
For this kind of problem, I believe you can use the inner class.
Here's the sample code I hope will help:
class MyApp{
B bFrame;
A aFrame;
class A extends JFrame{
public void doSomething(){
bFrame = new B();
bFrame.doSomething();
class B extends JFrame{
public void doSomething(){
aFrame = new A();
aFrame.doSomething();
If you have further question, you can email me your task sample code at [email protected] and I will solve it for you.
With my best,
Zike Huang(Jim)

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Plz help anyone who know how to fix my notification badge in itunes plz give an idea how to do ?

i cant used properly my apps like fb , youtube ang other apps because of the notification badge. they have a notice everytime i open the apps "connect the itunes to used the push notification" anyone who have experience this problem in their iphone, , share to me so i have an idea how to fixed my phone.

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

PLZ HELP, I dropped mini in water..now it's blank and cant reset

I dropped the mini in the water for a few seconds and immediately dried but the battery sign came out then turned off. I tried drying it with a hair dryer and saw that their was some sign of life but then it went blank again. I tried pluging it tot the computer but it doesnt want to charge....even though before dropping it, it had been fully charged. What can I do? I thank you ahead of time!!!

Let it air-dry COMPLETELY, before you do anything else. It might take a week to do so. Trying to dry it quickly can damage otherwise operational modules.

I have purchased new 5s from local dealer how do i check its genuinty online plz help

I have purchased new 5s from local dealer how do i check its genuinty online plz help

I'm not sure if the following is world wide but in some places you can enter your serial number and it will show warranty status and that may give you some indication: https://selfsolve.apple.com/agreementWarrantyDynamic.do

Plz help me out here frez...urgent

i really a need a program code that can read a length of string in a text file adn write the oupt in another file. for example, the program should be able to identify 14 bytesin the text file using string length and insert a semicolon at the end of the 14th bytes ( to be considered as 15th byte ) and finally write it out at a text file..Im really facing difficulties as im a beginner...plz help me...

How quick it is will depend on how much you remember and how quickly you pick things up I guess, but one or more of the following should be good:
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java. This one has been getting a lot of very positive comments lately.

Urgent how to call Webservice

I have call the Webservice in flex2 successfully however
after I deploy EAR / WAR, an error occur:
MessageError message='Unknown destination 'Default HTTP'
Anyone can help?

Following is how I call the webservice in mxml:
<mx:WebService id="wsBlogAggr" wsdl="
http://ip_address?WSDL"
useProxy="true" showBusyCursor="true">
<mx:operation name="getAllAccounts"
result="getAllAccountsInStringResult(event)"/>
<mx:operation name="removeAccount"
result="removeAccountResult(event)"/>
</mx:WebService>
private function UIComplete():void
wsBlogAggr.getAllAccountsInString.send();
private function
getAllAccountsInStringResult(ev:ResultEvent):void
// do sth
I think my code is right. As I can call the webservice in
flex2 server successfully, however, when i just open the generated
swf file, it already show me the error about
[RPC Fault faultString="Send failed"
faultCode="Client.Error.MessageSend" faultDetail="Unable to load
WSDL. If currently online, please verify the URI and/or format of
the WSDL (
http://ip_address?WSDL)"
I verified that I can access to the wsdl url.
So, after I deploy the EAR / WAR, also display that error to
me.

Hey mine avg link scanner is not working from the day i installed firefox 4 ....how to fix it plz help ?

hey mine avg link scanner(add-on) is not working from the day i installed firefox 4 ....how to fix it plz help ?
it was working fine with firefox's previous version ? but i like the interface & looks of firefox 4.......so i didnt want to swicth to 3.6 help me ?

if i reinstall that avg antivirus then is this will fix my problem

How to open a JSP page from a form ??? plz help

hi ..
i want to know how to open a jsp page from a oracle apps form using a button .
the requirement is that whenever we click on the button created on the form, it opens a jsp page.
plz help me ..its urgent !! :-(

In portlet project, to navigate between pages, you should not use the URL property to link to a page. Instead, portlets use navigation via action handling. You use the Page Navigation editor to set up links to pages; that is, the navigation editor sets the action property.
Here is an example to hyperlink ans button to open a new page:
# From within the IDE, create a new portlet project. This action creates the project and one page, PortletPage1.jsp.
# Create a second portlet page, called PortletPage2.jsp, for the project.
# Drop a Hyperlink component onto the first portlet page, PortletPage1. (You can drop the Hyperlink on the page in the Design window or on the PortletPage1 node in the Outline window.) Change the Hyperlink's text property to Next Page.
# Drop a Button component (found in the Basic section of the Palette) onto the second portlet page, PortletPage2.
# Open the Page Navigation Editor. It displays the two pages (PortletPage1.jsp and PortletPage2.jsp) of the application.
# Click the PortletPage1.jsp icon in the Navigation window to expand it, and then drag a connector from hyperlink1 to PortletPage2.jsp. Change the name of the connector from case1 to Page2.
# Click the PortletPage2.jsp icon in the Navigation window to expand it, and then drag a connector from button1 to PortletPage1.jsp. Change the name of the connector from case1 to Page1.
# Run and deploy the portlet. The browser displays PortletPage1 and you should see the Next Page hyperlink. When you click the Next Page hyperlink, the Apache Pluto Portal server displays PortletPage2. Click the Page2 button to return to PortletPage1.
Sherry
Creator Team

How can I get Gray background instead of White in Photoshop CC 2014 after rendering 3D ? I've seen this in many tutorials. Plz help me.

How can I get Gray background instead of White in Photoshop CC 2014 after rendering 3D ? I've seen this in many tutorials. Plz help me.

Brother, when I am rendering any 3D text in photoshop, then it shows white backgroung instead of Gray.
See White backhround is of mine and gray is on tutorials.

Plz help withen 5 min,how 2 call MS.World doc

Similar Messages

Maybe you are looking for