PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

Hi,
I need serious help,,,,,,any help is appreciated :
--- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
--- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
--- so tried to do restore,    F11  showed there were no previous saving for restore
--- tried to do recovery , F11  showed that "restore" botton is gray/ inactive
--- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
--- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
--- so now it boots up and goes to useless recovery page
---  through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive"  are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
---   so if i can just boot to previous windows , then i can change the group and access the files...but
--- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
--- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks!  phewww),,,,,,,,,
 i am panicked any help would be deeply appreciated.........................................................
HP Pavillion DV-7 4069 
Windows 7  Home Premium

Hi,
If you don't already have one, use another PC to create a Windows 7 Recovery CD.  Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD.  Once created, or if you already have this, insert the CD and restart to boot from it.  Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • HT4859 How do I recover from Icloud - I want to "roll back" my phone to the 3rd of October

    How do I recover from Icloud - I want to "roll back" my phone to the 3rd of October

    If your device backs up to iCloud, and that would happen every day assuming "conditions" are right, then you probably only have the latest backup available for a restore. You won't have one taken October 3 available.
    I say "latest backup available" because, although Apple mentions up to 3 backups are available for restore, most users report having only one when they try performing a restore. Certainly expecting going back 5 days would be outside the limits.

  • Intallation is being rolled back post deploying the SP1

    Trying to deploy SP1 across all win 7 systems. It's being successfully installed when PCs are not in domain but for Domain joined system it's being rolled back post initial installation and reboot. Please help me do get rid of this issue.

    Hello Tech Olive,
    What do you mean of the sentence ‘for Domain joined system it's being rolled back post initial installation and reboot’? the domain-joined systems keep roll back to install the Windows 7 service package 1?
    How do you deploy the Windows 7 service package 1?
    Do you receive any error messages in the domain-joined Windows 7?
    Please take the following steps for troubleshooting:
    1. Check if we can install the Service Package manually.
    2. As you mentioned that only domain-joined computer can't normally install the Windows 7 service package 1. I think it is related to domain setting. Please confirm with the domain administrator to check if there are group policy or setting to block the
    installation
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Regarding roll back and reassign the value.

    hi all,
    i am using forms6i.
    Re: how to avoid the form's message situation
    as we discussed my process has to happen like this. since it is a new topic so i have raised new thread.
    what i want to do is based on the input values(base table values) i have to call one procedure, the procedure returned value i have to assign to one of my database field and one new record should go into other table.
    so what i am doing is at the key-commit trigger i have written a procedure inside that i am calling a procedure which results in one value which i have to assigned to my blocks item. and one record to the table
    my code in key commit trigger is something like
    go_block('block name');
    first_record;
    based on the forms parameter call procedure
    if procedure returns error then rollback otherwise assign value to base table item and one record to other table so
    job_proc();
    :block.item:= output ;
    insert into job_table() values();
    if system.last_record = 'TRUE' then
    exit
    else
    next_record;
    end loop;now senario is like if i am in fifth record four record processed as i explained before. in fifth record if i am getting error means
    all four records value and insert statement should be reassined and rolled back.
    so i have written like
    exception when others then
    forms_ddl('rollback');
    go_block(block name);
    go_record(system.current_record);
    :block.item := null;
    if :system.trigger_record = 1 then
    exit;
    else
    previous_record;
    end if;
    end loop;is this is the way to rollback or is there any better way?
    please advise.
    Thanks..

    Hi,
    Check these files on rollback and commit:
    Transactional Behavior of an Integration Process:
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/058023846b2460e10000000a1553f7/frameset.htm
    Commit Handling:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/814d3ccd6fba74e10000000a114084/frameset.htm
    Rollback:
    http://help.sap.com/saphelp_nw70/helpdata/en/23/5f5fd653b6f64d9bb0b468a8689838/frameset.htm
    Regards,
    Subhasha

  • Instance roll back while validating the XML message using Mediator

    Hi all,
    I am facing issue when calling a mediator process in validating the XML before invoking the target application
    Below is the error for the instance.
    com.collaxa.cube.engine.EngineException">
    Global retry rollback fault thrown.
    The current JTA transaction is aborting due to an user rollback fault being thrown. The upstream component should retry in a new JTA transaction upon catching this fault.
    This exception was caused by a global retry fault being thrown from downstream component. The user had directed the BPEL engine to roll back the current JTA transaction and retry within new JTA transactions for the specified number of times and retry interval.
    There is no action recommended.
    -<stack>
    <f>
    com.collaxa.cube.ws.WSInvocationManager.invoke#334
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke#1070
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke#584
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.handle#132
    </f>
    <f>
    com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements#74
    </f>
    <f>
    com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#166
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.performActivity#2687
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine._handleWorkItem#1190
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.handleWorkItem#1093
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#76
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#218
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#297
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.endRequest#4609
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.endRequest#4540
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine._createAndInvoke#713
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.createAndInvoke#560
    </f>
    <f>
    </f>
    </stack>
    </exception>
    -<root class="oracle.fabric.common.FabricInvocationException">
    java.lang.NullPointerException
    -<stack>
    <f>
    oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process#1006
    </f>
    <f>
    oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post#663
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost#142
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.MessageRouter.post#197
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.MeshImpl.post#215
    </f>
    <f>
    sun.reflect.GeneratedMethodAccessor2091.invoke
    </f>
    <f>
    sun.reflect.DelegatingMethodAccessorImpl.invoke#25
    </f>
    <f>
    java.lang.reflect.Method.invoke#597
    </f>
    <f>
    org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection#307
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint#182
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#149
    </f>
    <f>
    oracle.integration.platform.metrics.PhaseEventAspect.invoke#59
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#171
    </f>
    <f>
    org.springframework.aop.framework.JdkDynamicAopProxy.invoke#204
    </f>
    <f>
    $Proxy341.post
    </f>
    <f>
    oracle.integration.platform.blocks.local.LocalInvocationProcessor.post#211
    </f>
    <f>
    </f>
    </stack>
    {code}
    I have some knowledge in transaction but this no where in my picture. In bpel process no where i mention transaction is* required* for the mediator component and my mediator is one way asyn process.
    Also i defined catch all activity in my bpel and if some thing happen it suppose to move to catch all block but it didn't happen here.
    I look forward from some one to help me in resolving in this.
    Appreciate some one help here.
    Regards,
    Tarak.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Thanks for the prompt help. Is there any other way instead of removing the DTD line ?. Because the xml is coming as a string and removing the dtd and then adding it will unneccesary hamper performance. Do you any other way in which even though I don't remove the line I get the output without removing the dtd line ?.
    thanks and regards,
    Sachin

  • I wanna roll back to iOS5 the easy way

    How do we roll back to iOS5, from 5.0.1, that restore is PIA, any easy way? If there is no "easy way" then Apple should find one, it helps when ever their updated OS creates more issues, it should give an option to roll back to previous OS, as easily it  a 50mb update installs, using just wifi, that's all we want..

    You can't. You can't roll back by any Apple-approved method. And if you did chances are it wouldn't fix whatever your problem is. If you have issues with 5.0.1 fix them as most others have. There's nothing wrong with the release, only with your phone.

  • Should Verizon provide a roll back option from the gingerbread update?

    Simple and straightforward. Do you believe That verizon should provide a rollback option from the gingerbread update?
    My vote would be Yes.
    Here is some reasons why
    1 First and foremost the update should not have been forced.
    2 When making significant changes to the operating system like gingerbread has Motorola should have the decency to contact Droid owners And inform them of the changes they attend to make.
    3 The update wasn't really necessary.
    4 ethically I believe that verizon should provide a roll back option.
    5 regardless of what the fine print says in the contract just because something is legal to do doesn't mean it is ethical to do.

    Talk about beating a dead horse.......
    I was President of the GB Sux Club after it came out. At least a dozen bugs and glitches were created after I installed it.
    But, you know what?
    In the weeks that have followed, as apps have been updating (you should check the Market for available updates if you don't have them set to auto), and I check daily, something interesting has happened.
    Most of the bugs and glitches have mysteriously gone away.
    Is/was GB the "problem"? It wasn't perfect, but it wasn't the problem.
    After GB, my phone did and does bizarre things from time to time that makes me wonder how they could be caused by a conflict the O.S. is having with a 3rd party app.
    The 3G dropping issue notwithstanding.
    There are some issues, yes. But, I contend apps are the main "problem".
    Can going back to Froyo (if it were possible) do more harm than good, if 3rd party apps are updated for GB? That's above my pay grade.
    I did a reset after GB and it solved nothing. I defiantly refused to un-install all apps, or reboot in Safe Mode.
    I did NOTHING but let the developers update their apps and right now, my phone is largely bug and glitch free, again.
    In politics, there was the saying, "It's the economy, stupid". In Android, "It's the apps, stupid". (Not speaking to anyone in this forum).
    Yes, the evil empire has it right when it comes to the stranglehold they have on which apps are allowed on their tiny iphones.
    But, you know what? If, OEMs did the same, the Android experience wouldn't be the frustrating situation it is at times, ESPECIALLY after EACH update.
    In my opinion.

  • I want my money back! but the shop wont do that

    hi everyone
    i am SO DONE with the zen micro! from what read on this forum, lots of people had a problem with their headphones being broke, I HAD THAT TOO! other people had problems had problems with their creative just not turning on at all anymore, I HAD THAT TOO! that's two times that my creative zen micro has been in repair, 6 weeks i get a new one. but now, AGAIN, my zen micro is broken, it is frozen at the creative screen, like a lot of people have too. now i completly HAD it with this device, i don't want another repair or new machine, i simply want my money back and i'm gonna get another mp3 player. but here comes the trouble:
    i bought this thing at a shop which doesn't just return money (and i can understand), but they also don;t just give out a new machine, they just take it in repairs. the last time my zen was in repair it was away for 2 (!) **bleep**ing weeks!! is there any way i can somehow contact creative and ask my money back from them? since the shop doesn't.... does anyone know how to get my money back in stead of repairment?Message Edited by Serious_Shady on 0-2-2005 09:4 PM

    Most stores, i believe, would not do a refund. This is especially so if the player is bought for quite sometime already i.e. more than a month (think about it: If i buy a player which I don't really like/bought a player just to test it out, then I simply get a refund - is that fair to the store?). What they usually do is offer a -to- exchange. Even so, that exchange is only available for a pretty short period of time, usually with 7 days of purchase. Guess you should just make full use of the warranty services at the moment.

  • How to Copy USB Recovery Drive back to accidentally deleted Recovery Partition Windows 8

    I was Creating USB Recovery Drive for my Windows 8.1 and Then I accidentally got my Recovery Partition deleted.. Now I want to restore RecoveryPartition back on my Hard drive. Provided I have the Recovery Data on USB Recovery Drive.. Now what should I do? Please help.

    If you've made a Dell Backup and Recovery USB you can restore all the factory partitions:
    http://dellwindowsreinstallationguide.com/dell-backup-and-recovery-1-8-1-71/

  • When I want to go back a page the drop down box is filled with the current page, all earlier sites have disappered out of sight

    When I have been at a site for a while and decide to go back, when I use the drop down box it has filled with the current page location. The longer I am there the more times it repeats its self.

    Did you try Safe Mode?
    An extension may be responsible for adding up those entries of the same page.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Plz plz i want to deliver a message to the sony mobile managers

    hi guys i hope that u r ok
    i am a sony loyal fan since the days of k750 .....
    and i have a message to deliver to the sony mangers out there in tokyo ....
    plz help me to get this done

    I don't understand
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Can't install photoshop elements 12.  keeps rolling back.  deleted the two items recommended on the help site.  no go.

    Been trying to install this horrible thing for 3 days now.  Out of time and out of work with clients clamoring for their pictures.

    Hi,
    Can you please send in the log files collected using the utility - Log Collector Tool ?
    You may email them to me at - [email protected]
    Thanks
    Andaleeb

  • Statement in Transaction Does Not Roll Back

    I have a group of MySQL statements in a method of a Java application.
    I include an SQL error in the last statement to test the rollback of the transaction.
    All the statements roll back, EXCEPT for the one detailed below.
    The MySQL table:
         CREATE TABLE Counter (
              number INT( 4 ) NOT NULL DEFAULT 0,
              account_id VARCHAR( 12 ) NOT NULL PRIMARY KEY
         ) ENGINE = InnoDB;I have run the staement as a PreparedStatement and a Statement:
    PreparedStatement:
         String updateCounterStr =
              " UPDATE Counter " +
                   " SET number = number + 1 " +
                   " WHERE account_id = ? "
         updateCounter = con.prepareStatement ( updateCounterStr );
              updateCounter.setString( 1, accountID );
              int uc = updateCounter.executeUpdate();     Statement:               
         Statement updateCounterStatement = con.createStatement();
              int updatecounter = updateCounterStatement.executeUpdate(
                   "UPDATE Counter SET number = number + 1 " +
                   "WHERE account_id = \'" + accountID + "\'"
              con.setAutoCommit( true );     //     ------------------------------------ Transaction ENDS
              updateCounterStatement.close();
    //               updateCounter.close();
              ... several more
              con.close();
         } catch(SQLException ex) {
              System.err.println("SQLException: " + ex.getMessage());
              if (con != null) {
                   try {
                        System.err.print("Transaction is being ");
                        System.err.println("rolled back");
                        con.rollback();     //     < ------------------------------------ con.rollback() HERE
                   } catch(SQLException excep) {
                        System.err.print("SQLException: ");
                        System.err.println(excep.getMessage());
    }     //     ---------------------------------------- END the methodIn both cases Counter is incremented, but does NOT roll back.
    The other statements in the transaction do roll back,
    I am using:
    mysql Ver 14.12 Distrib 5.0.18, for apple-darwin8.2.0 (powerpc) using readline 5.0
    on Mac OS X 10.4.x
    I would greatly appreciate a solution to this problem.
    Many thanks in advance

    I think autocommit is true by default. Also, it looks like your'e setting it to true, and then executing more SQL.
    Explicitly set it to false, and DON'T set it back to trueif there's any chance you're going to want to rollback after that.

  • Can i roll back to Acrobat 9 Standard from Acrobat X Standard?

    Can i roll back to Acrobat 9 Standard from Acrobat X Standard?  I bought Acrobat X license and want to roll back to 9.
    Thanks in advance.

    Do you have the Acrobat 9 Standard media?
    Do you have an Acrobat 9 Standard serial number?
    If not, then that's a non-starter.
    You'll need to talk to Adobe provided that is who you actually purchased the software and not a reseller.
    If yes, then it is a matter of removing Acrobat X first
    Rebooting the machines
    Then reinstalling Acrobat 9 Standard.

  • Transaction roll back

              Dear Everyone,
              What kind of exceptions do the wls container force to roll back a transaction?
              Already a simple NullpointerException does it or it has to be a kind of special
              Exception like EJbException?
              And if I catch that exception I hope it does not roll the transaction back if
              I do not rethrow.
              Thanks for your help.
              Miklos
              

              Dear Deyan,
              Thanks for the answer. Actually an entity creation rolled back even I throw an
              CreateException.
              That is very intersting, and it is not mentioned in the sun documentation.
              Actually I catch the CreateException and rethrow it.
              Any idea why it happens?
              Miklos
              "Deyan D. Bektchiev" <[email protected]> wrote:
              >Miklos,
              >
              >Once the exception crosses the invocation wrapper if it is an instance
              >
              >of RuntimeException (NPE is) or RemoteException (this one is there
              >mostly for backward compatibility with pre-EJB 2.0 spec) the transaction
              >
              >will be marked for rollback so you cannot commit it.
              >If you don't want to roll back the transaction, throw an application
              >
              >exception instead (any other type that inherits from java.lang.Exception).
              >
              >Regards,
              >Dejan
              >
              >Miklos Molnar wrote:
              >
              >>Dear Everyone,
              >>
              >> What kind of exceptions do the wls container force to roll back a transaction?
              >> Already a simple NullpointerException does it or it has to be a kind
              >of special
              >>Exception like EJbException?
              >> And if I catch that exception I hope it does not roll the transaction
              >back if
              >>I do not rethrow.
              >>
              >> Thanks for your help.
              >>
              >> Miklos
              >>
              >>
              >
              

Maybe you are looking for