PM01 - Custom Infotype "No entry in table T589A for P"

I created a custom PA Infotype with PM01 and now get error "No entry in table T589A for P". T589A is a table with function codes e.g. DIS, INS, LIS and also "P" & "Z". T589A is read when the dynamic PF-STATUS processing is done for Infotypes. I'm trying to do an insert with INS, but as the program tries to read from T589A, field PSYST-IOPER is blank. Any advice? Please assist. Thanks, Adrian

Just had to regenerate

Similar Messages

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

"No entry in table T589A for P" for HR Infotype

Hi,
Does anyone knows why do I encounter this msg "No entry in table T589A for P" when I run HR_INFOTYPE_OPERATION for a specific customised Infotype. I am actually doing a Update operation that I encountered this problem.
Hope to hear from u soon. Will Award points for solution provided.
Lawrence Boey

Hi lawrence,
1. For the paramter OPERATION
in the FM,
pass valid values like
DIS INS MOD
2. For update, the value is MOD
3. All valid values are contained in table T589A.
regards,
amit m.

"No entry in the table T589A for P" in PPOME's custom Tab

Hello,
requisites: Add one custom Tab to transaction PPOME relative to Position (Object type S)
problem:"No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
I get this error message "No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
The thing is, if I comment the line "MODULE BEFORE_OUTPUT" in subscreen 7000 of the infotype (the tab is infotype specific) this error disappear. But then the data entered in the tab, which should be relative to one position (type S), is now displayed for all positions. When leaving the transaction, and entering again, in the same tab, the data has disappeared.
I think I should not comment this: "MODULE BEFORE_OUTPUT"
Why is this error being raised, and what must I do do stop it?
Thank you.

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

Error message 'No entry in the table T589A for P 2'

Hi all,
I am updating the field of an infotype using the function module 'HR_INFOTYPE_OPERATION'. But the function module is not updating the field. Instead the return key of the function module has the message
'No entry in the table T589A for P2'. The function module is called as follows:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '9900'
    number                 = wf_pernr
    SUBTYPE                = P9900-SUBTY
OBJECTID               =
LOCKINDICATOR          =
    VALIDITYEND            = P9900-ENDDA
    VALIDITYBEGIN          = P9900-BEGDA
RECORDNUMBER           =
    record                 = p9900
    operation              = 'MOD'
TCLAS                  = 'A'
   DIALOG_MODE            = '0'
   NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = wf_return
   KEY                    = wf_key
Please suggest.
regrds,
madhu

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

No entry in table T582A for 171

Hi Friendz,
When I executed Idoc, system is throwing message No entry in table T582A for 171. I checked in T582A and T777D (attribute/characteristics ) tables infotype is available.
Please advice to rectify this issue asap.
Thanks in advance,
$Lakshmi
Edited by: Narayana on Feb 20, 2010 3:16 AM

Hi Sujit,Pradeep,ERP12345
Issue resolved...
I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
But my question is why after copying it is throwing this error? i cant find any logic
sorry I cant give any forum points because its already resolved...
But anybody can tell the logic then i will definitely give the points.
Thanks in advance...

IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

Hi,
I have configure allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
Regards
Subhedar B.

table t510
MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART ENDDA      BEGDA      BETRG
100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
t511
MANDT    100
MOLGA    IQ
LGART    1019
ENDDA    31.12.9999
BEGDA    01.01.1992
ABTYZ       1
WKTYZ     11
OPKEN
ZEINH    030
KOMBI    2
BTMIN    0
BTMAX    0
ADSUM    X
MODNA    TARIF
MODSP
RUTYP
RUDIV    0
ADDJN
MOD01    1
MOD02
MOD03    A
ANMIN    0.00
ANMAX    0.00
V_511_B
Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
EE Subgroup grouping   Personal subarea
0 1 2 3 4 5 6 7 8 9     0 1 2 3 4 5 6 7 8 9
          1                          1 1

Problem with No entry in table T591B for 0015 08 E101

Hi all,
This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
Thanks in advance for any advice anyone can give me
Nyree

Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101' for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
Rgds.

No entry in table T527X for E

Hi,
The HR IDOCs are ending in error in our production system with the error:
No entry in table T527X for E
Message no. RP301
Diagnosis
The entry values must be stored in table T527X. The " E" value(s) are not in this table.
When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
The error just started from today and we do not know as to what is causing this error.
I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
Can anyone please help?
Regards,
Archana

The IDOC is being processed by a custom Function module but this program was modified
and the changes were moved to the system last week.
If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
I am thinking about the complexity of the Standard Function (which almost processes all
types of HR master data and how developer must have managed to write Custom code for all of this.
Quite Complex I think.
The main change was that in some updation BDC is now used to update the screens
directly and then PA41 tcode is being called. Do you think this might cause the issue?
But then it works in reprocessing - strange.
In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
(i think).
Well what all I can say is track the error message while running the IDOC for first time and
that will only give you the solution.
Regards
Shital

No entry in table T512W for key 40 9913

Dear Guru
When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
9913 is the wage type which is getting updated due to INCS rule.
In the log, 9913 value is same as value of EDLI Contribution
/3F7 EDLI contri0101 32.50
9913 0101 32.50
I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
Regards
Vikas K Sharma

Hi
I checked the customized WT entry table and there is no 9 series WT at all.
Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
Please guide.
Regards
Vikas K Sharma

No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008

Hi,
When trying to save entry in 0008 infotype i am getting the error "No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008"
I had removed the integration PLOGi ORGA for some testing purpose. is it because of this. now i have set the integration switch back. still i am not able to resolve this.
Can anybody help me in this.
thanks

Hi,
Maintian the table V_t510, go to V_t510, enter the values like
40- Country Grouping
04- PS type
03- PS ARea
3- CAP(collective agreement Provision) which you have assigned to your employee subgroups in table V_T503Z.
MANAGER - Ps group
1 - Ps level
on 01.04.2008- start date.
in this table enter the wage type, which you have created under basic pay.
like
3 manager 1 1000 01012008 31129999
3 manager 1 1010 01012008 31129999
Regards
Devi

No entry in table T549Q for key 01 at 20120131

Hi Experts,
I am getting this error "No entry in table T549Q for key 01 at 20120131". On running time evaluation.I have generated payroll period frm 1999 to 2020.employee hire date is
1.1.2012.runnig TE for first month upto 31.1.2012.control record set to correction in 1.1.2012-31.1.2012(11th payroll period of
2011).this error is not at all going.
Help is appreciated...
Thanks in advance

Hi Sujit,Pradeep,ERP12345
Issue resolved...
I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
But my question is why after copying it is throwing this error? i cant find any logic
sorry I cant give any forum points because its already resolved...
But anybody can tell the logic then i will definitely give the points.
Thanks in advance...

System error -no entry in table T093 for the chart of depreciation or ccode

When checking Depreciation Areas of Company Codes in overview for experts (transaction SPRO) I first get a warning message inconsistent rounding entries were corrected.
After saving once in the maintenance transaction (as recommended in the help text) I get the following system error: there is no entry in table T093 for the chart of depreciation or company code. I checked table T093 and all entries are in there!
What else I have to correct?
Regards
Cordula Speh

hi ,
yours is customizing problem only, check all steps once again in customizing. T093 is initial customizing for asset accounting. just go through below things and check based on this order all customizing.
1.     Copy Reference Chart of Accounts Depreciation / Depreciation Areas.
2.     Specify Description of Chart of Depreciation (COD).
3.     Copy / Delete Depreciation Areas.
4.     Creation of 0 Tax Codes for Non-Taxable Transaction.
5.     Assign Tax Codes for Non-Taxable Transactions.
6.     Assign COD to Company Code.
7.     Specify Account Determination.
8.     Create Screen Layout Rules.
9.     Define Number Intervals.
check one by one and if you find anything missedout do it, i think max you prblm solve, if not give some more details about your problem.
thanks and regards
vk.

No entry in table T001P for key when running time evaluation

Hi There,
All the master data is in synch and I am getting this error when
running time evaluation.
*No entry in table T001P for key
Person rejected: xxxxxxxx*
Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the master data dates are correct.
Any comment/help is greatly appreciated.
Thanks,
Gajanan

Hi,
In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
and in other thread he says
"the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
Can you please check it once.
Good Luck..!
KK

No entry in table T503 for "D"

Hello Experts,
while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
Note:
when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
please tell me what is going on, i am really confused !!
Thanks in advance.

Hi,
1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
4. Maintain the Employee attributes in V_503_C via SM30
In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
hope this helps.
Ajay

PM01 - Custom Infotype "No entry in table T589A for P"

Similar Messages

Maybe you are looking for